Used Solenoid for sale (364)

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve Nedpsy Atnmofx Acfswh -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 165/48/H70 mm -Weight: 1.6 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, check valve Nsdpfx Aey Atkhscfjwh -Manufacturer: Parker, Unlockable check valve, unused -Type: CPOM2BBV55 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 130/50/H50 mm -Weight: 1.5 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, check valve -Manufacturer: Parker, Pilot-operated check valve, unused, original packaging -Type: CPOM2AAV56X309 -Pmax: 350 bar -Number: 11x valve available Njdsy Athgopfx Acfowh -Price: per piece -Cardboard dimensions: 145/55/H55 mm -Weight: 1.5 kg/pc.

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, check valve -Manufacturer: Parker, Unlockable check valve, unused, original packaging -Type: CPOM2 DDV 56 X 309 -Pmax: 350 bar -Number: 18x valve available -Price: per piece Nwsdsy Atcwopfx Acfjh -Cardboard dimensions: 205/60/H55 mm -Weight: 1.5 kg/pc.

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW14FNSWH75X753 -Pmax: 350 bar Nwedpfx Acjy Ar Sdjfjh -Quantity: 1x valve available -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW2ENSWH75X753 -Pmax: 350 bar -Number: 2x valve available -Price: per piece Nwjdpfx Acey Alv Njfsh -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Number: 3x valve available Nwodpfx Acey Aluxsfoh -Price: per piece -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm Nwodsy Alqmepfx Acfoh -Weight: 1.5 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve Nwodpfjy Alg Usx Acfoh -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW8CNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Cardboard dimensions: 290/65/H100 mm -Weight: 2.3 kg

Condition: excellent (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve Nwedpfx Ajy Alfqjcfoh -Manufacturer: Parker, directional control valve, unused, original packaging -Type:.: 4070180000 -Pmax: 350 bar -Number: 2x valve available -Price: per piece -Cardboard dimensions: 330/85/H120 mm -Weight: 5.7 kg/pc.

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D1VW8CNSWH75X753 -Pmax: 350 bar -Number: 1x valve available Njdpsy Alahofx Acfewh -Dimensions: 237/46/H70 mm -Weight: 2.1 kg

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Bosch, Directional control valve -Type: Pmax: 315 bar Nsdey Ak Scjpfx Acfowh -Number: 2x valve available -Price: per piece -Dimensions: 215/46/H75 mm -Weight: 1.9 kg/pc.

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Bosch, Directional control valve -Type: Pmax: 315 bar -Number: 2x valve available Nsdjy Ak Nnspfx Acfewh -Price: per piece -Dimensions: 215/46/H75 mm -Weight: 1.9 kg/pc.

Condition: good (used), 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve valve, 4/3 way valve. -Manufacturer: Bosch, Directional control valve -Type: Pmax: 315 bar -Number: 2x valve available -Price: per piece Nedpfxoy Ak Eco Acfjwh -Dimensions: 215/46/H75 mm -Weight: 1.9 kg/pc.

Condition: good (used), 5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve -Manufacturer: Bosch, Directional control valve -Type: Pmax: 315 bar -Quantity: 1x valve available -Dimensions: 215/46/H75 mm Nodpfx Ajy Ak Dlecfswh -Weight: 1.9 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Nsdoy Uuw Tepfx Acfjwh Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. Nwedeh U Rzgjpfx Acfeh LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, Technical specifications: Length: 6 m Length of cut log: 1000 – 4200 mm Main motor: 7.5 kW Diameter of processed log: 1000 mm 600 mm band saw guide wheels Frame made of 160 mm C-profile Band saw length: 4800 mm Band saw width: 40-50 mm Electric up and down drive Feed via a gear motor, continuously controlled by an inverter Support arms x 5 Saw hoist: Hydraulic ADDITIONAL EQUIPMENT Hydraulics: Nodpfjwavqlox Acfjwh Log loading x 1 Drag arm team Log leveling system x 1 Log press x 1 Chain turner x 1 Hydraulic power unit: 4 kW Optional equipment: Board drop system Microprocessor cutting thickness controller ISP-10 Bark cutter/debarker Bed extension Motor: 11 kW 15 kW / 18.5 kW Electric roller Additional manual pressure Driver's seat Operator platform Desktop-stationary Additional hydraulic components / Log press / Chain turner / Powered leveling / Leveling / Loading Double-sided head lifting chains 2x16B Hydraulic accumulator Water solenoid valve Extendable support arms Loading ramp Head drive from two sides

Condition: new, Year of construction: 2025, Two tables are connected via a tandem system to achieve a combined load capacity of 5000 kg. Technical description with the following key data: Load capacity: 3000 kg static line load Useful stroke: 800 mm Overall height: 240 mm Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for the full useful stroke Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + protective earth, with 16 A CEE plug and 3-meter cable Motor: 2.2 kW, 1400 rpm Valve voltage: 24 V DC Protection rating: IP 54 generally, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Unit placement: integrated in the lifting table Control box: Dead man's control including 2 m cable Total weight: approx. 330 kg Tandem control for synchronized operation. Note: No guarantee can be given for 100% synchronous operation. Nodpfxjk E Hmto Acfewh Any height differences that may occur will be compensated for in the base position or upper position. The safety cut-out strips of the two lifting tables are NOT interlocked. Minimum distance: 500 mm between the lifting tables. Maximum distance: 3000 mm between the lifting tables. Self-supporting base frame with 4 flanged wheels, into which the lifting table is installed. 4 ball-bearing flanged wheels, wheel diameter 150/175, heavy-duty design for maximum load, made of turned steel C45. Overall height: + approx. 50 mm.

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,950 mm, construction height: 300 mm, lifting height: 1,650 mm, load capacity: 1,500 kg, overall weight: 450 kg, total length: 2,500 mm, total width: 800 mm, table width: 800 mm, table height: 1,950 mm, table length: 2,500 mm, transport length: 2,500 mm, transport width: 1,200 mm, platform width: 1,200 mm, platform length: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 1,950 mm, space requirement width: 1,200 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, Technical description with the following main data: Nwodpfxjuhphvo Acfoh Load capacity 1500 kg static line load effective stroke 1650 mm Overall height 300 mm Total height 1950 mm Platform length 2500 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 35 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Paintwork dust gray RAL 7037 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 450 kg

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010521, Technical specifications: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm Njdpsxxt D Rofx Acfswh - X-axis travel: 570 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse in Z: 30 m/min - Y-axis travel: 40 mm / Rapid traverse in Y: 30 m/min - Standard closed automation (number of loading magazines by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum spindle speed: 4500 rpm - Power at 100% / 40% duty cycle: 18 / 27 kW - Torque at 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holder for cylindrical shank DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Max. tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 37 Nm, 25% duty cycle: 26 Nm, 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V - Connected load: 42 kW Dimensions - Total machine dimensions: Length = 2680 mm (3820 mm with chip conveyor), Width = 2040 mm, Height = 2400 mm - Weight: 6500 kg Main Features and Capabilities - Vertical design: Enables optimal chip removal and easy loading/unloading - Control system: GE Fanuc Series 18i TB - High precision: Positioning accuracy on X/Z axes is ±0.001 mm thanks to Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic version not available, printed manual incomplete Machine status: NOT WORKING - Spindle drive - X-axis linear scale - Safety access door (Euchner) - Emulsion solenoid valves x2

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: P-30010522, Technical characteristics: Work Area - Maximum clamping plate diameter: 260 mm - Maximum turning diameter: 260 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 110 mm - X-axis travel: 570 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026, Size 6 !!! Brand new, replaced in 2024 !!! Nwjdjxxkh Tepfx Acfsh - Maximum speed: 4,500 rpm - Power, 100% / 40% duty cycle: 18 / 27 kW - Torque, 100% / 40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool holders with cylindrical shank to DIN 69880: 12 - VDI40 - Number of turret stations: 12 - Maximum tool length (including holder): 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% duty cycle), 26 Nm (25% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400 – 480 V - Connected load: 42 kW Dimensions - Overall dimensions: Length = 2,680 mm (3,820 mm with chip conveyor), Width = 2,040 mm, Height = 2,400 mm - Weight: 6,500 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: GE Fanuc Series 18i TB - High precision: Positioning accuracy in X and Z axes ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and broad speed range - Automated loading/unloading: Integrated automation system for part feeding and removal - Driven tools: Capability for drilling and milling operations - Chip conveyor - Documentation: Electronic unavailable, partial hard copy/manual available Machine status: NOT WORKING - Hydraulic solenoid valves: 4 units - Coolant (emulsion) pump defective

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 68178, Technical characteristics: Work Area - Maximum diameter of clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / Rapid traverse in X: 60 m/min Njdpfx Acexwk Iwefewh - Z-axis travel: 250 mm / Rapid traverse in Z: 30 m/min - Standard closed workpiece automation via gantry loader and individual nest conveyor system Main Spindle - Spindle interface according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Continuous power (100% duty cycle): 38 kW - Continuous torque (100% duty cycle): 300 Nm Tool Turret with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm - Torque capacity per driven station: 70–100 Nm Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Total dimensions: Length = 3,390 mm; Width = 2,850 mm; Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy workpiece loading/unloading - CNC control: Siemens 840D SL - High precision: Positioning accuracy in X and Z axes by Heidenhain linear scales - Main spindle (Weiss): High power and wide speed range - Automated loading/unloading: Parts are loaded and unloaded via integrated automation - Live tooling via Sauter turret: Extends machining capability to include drilling and milling - Cooling and paper filter unit: DGS System GMBH, 950L - Chip conveyor: DGS System GMBH - Hydraulic power unit: Rexroth, flow Q = 13 l/min, max. pressure = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation available: Yes Machine Condition: NOT WORKING - Loading/unloading sliding doors defective - Linear scale X axis (2 units) - Turret position sensor (furT30) - Spindle clamp/unclamp sensor - Emulsion solenoid valves (4 units)

Condition: excellent (used), Spare parts for Esterer log carriages LSH 65, some in new condition, new and used. Flywheels, stanchions, hydraulic cylinders, chain drives, feed gears, guides, solenoid valves, overhanging parts. Saw frame, top and bottom, saw carriage with insertion brackets. Pulleys. Nedpji T Egpefx Acfswh Spare parts also available for Esterer log carriages SS 71.

Condition: used, Plug-in welding control in a 19" housing Type NPS 8043-1 IQ1 with quality assurance and 50 programs Solenoid valve voltage: 24 V DC complete with current measuring belt MB 260 Nsdpfsdga Nbex Acfowh OTHER CONTROL MODULES IN STOCK: e.g.: 8036 - 8036-S3 8033 8043 MPS 200 R1 RATIA 43a HWS 2202 Profil IQ