Used Sonstige 750 X 400 Antriebstrommel for sale (69,892)

Condition: new, functionality: fully functional, machine/vehicle number: 10000475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Low-bed trailer 125x250cm, 750kg, "Type U4" Passenger car trailer Type U4 with loading dimensions of 125 x 250 x 45cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg, including a 10-year warranty. Koch Anhängerwerke has been manufacturing high-quality trailers made in Germany for over 30 years. Special features: Double-walled, anodized aluminum side wall 30mm (unique) Side wall with cargo securing system in V2A stainless steel (unique) Very stable rear door latches made of V2A stainless steel (unique) Side wall fastening completely with 8 mm V2A stainless steel (unique) Three-sided lashing rail / railing (unique) 2x M16 threaded tension anchors / stable threaded rods at the rear (unique) Additional equipment: Support wheel Pjdpfoi R Hw Asx Anysrb Rear door easily removable Stable screen-printed floor, non-slip birch wood, waterproof glued Axle and drawbar completely hot-dip galvanized, manufacturer ALKO Large 185 / 70 R13 tires, balanced and suitable for 100 km/h Steel sheet mudguards screwed with 8 mm stainless steel screws 12 Volt electrical system, 13-pole connector with reversing light Other Vehicle registration document / registration certificate part 2 Various accessories available at an extra charge! If you would like to purchase this trailer or have further questions, please use our internal box trailer "No. 10000475".

Condition: used, Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø150 x 145 mm -Item No.: 827 223 65 -Heating power: 2400 W -Voltage: 220V -Number: 2x heating tape available -Price per piece Psdpfelvyk Aex Anyorb -Dimensions: 215/170/H145 mm -Weight: 1.9 kg

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm - Max log length 3200 mm CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW - Receiving roller table with ejecting mechanism for edgings and side boards - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines - Receiving table Predpfx Aelar Risnyob - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Year of construction: 2009, condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1000 mm -Conveyor length: 2750 mm Prjdpjtlzf Sefx Anyeb -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 11x roller conveyor available -Price per piece -Dimensions: 3030/1200/H960 mm -Weight: 332 kg/pc.

Condition: used, Corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with removal conveyor, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Drive: SEW-Eurodrive 0.18 kW 1380/88 rpm / 0.18 kW 71 rpm -Intermediate dimension: 1500 mm Pedjtrhmqjpfx Anyjrb -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Lifting: pneumatic -Belt conveyor length: 1400 mm / belt spacing 2x 480 mm -Number: 1x transfer station available -Transport dimensions: 1740/1550/H680 mm -Weight: 410 kg

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFT with guide rollers -Speed: m/min -Conveyor belt length: 1400 mm -Belt spacing: 500 mm -Roller spacing: 760 mm, adjustable see photos -Drive: dunkermototen 24 V -Number: 5x conveyor belt available -Price per piece -Dimensions: 1460/1140/H1060 mm -Weight: 149 kg/pc. Pedpfx Aetrhm Henyerb

Condition: new, Year of construction: 2025, machine/vehicle number: 23GS101972, fuel type: diesel, motor manufacturer: Kubota D1105-EF02, General information Field of application: Construction Weights Empty weight: 450 kg Functional Generator capacity: 15 kVA Dimensions of cargo space: 163 x 77 x 107 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 38 l Production country: IT Additional information Prodsrulz Ejpfx Anyjb Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Year of construction: 1956, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Meuser, lead screw and feed screw lathe type M3A Podpfx Ash Uuzyonyjrb -Turning length: 1400 mm -Turning diameter over bed: 550 mm -Turning diameter without bed: 800 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools (see photos) -Tailstock mount: MK5 -Dimensions: 2770/1160/H1310 mm

Condition: good (used), Manufacturer: Hoppe / Cyrus Size: 1.400 x 2.600mm Deck: 1 Included: – UE 45 Unbalance Exciter – Electrical Motor (15 kW / 970 RPM) Prsdpfxog Styze Anyjb – Cardan shaft – Rubber Bumpers

Year of construction: 2008, condition: good (used), Pressbrake LVD - PPEB EASY FORM 320/40 MACH-ID 7712 Make: LVD Type: PPEB EASY FORM 320/40 Control: CADMAN Year: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Specifications Metric US Standard Max. bending length 4000 mm Distance between column 3150 mm Max. pressing force 320 T Dis. Beam - Table 570 mm Beam stroke 300 mm Table Width 200 mm Troth beam 400 mm Approch speed 120 mm/min. Working speed 14 mm/min. Return speed 130 mm/min. Adjustment X-Axis back gauge 1000 mm Control CADMAN Power 42 kW Dimensions (Estimate) Length 5800 mm Width 2300 mm Podpfjnvduzjx Anysrb Height 3800 mm Weight 23000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 6 months, DGUV certified until: 08/2027, cutting width (max.): 25 mm, type of input current: three-phase, total length: 750 mm, total width: 800 mm, total height: 860 mm, control voltage: 24 V, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, year of last overhaul: 2026, space requirement height: 860 mm, space requirement length: 750 mm, space requirement width: 800 mm, Bread slicer circular knife machine Wabäma model: R 400 EX The all-rounder among the bread slicers EX model for installation in the sales counter! Max. number of discs: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Round knife machine with bread halving Circular knife made of high-quality Teflon special coating machine mobile Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 750 x 860 mm, WxDxH Pedpfx Aom Tr Hwenyjrb Used machine cleaned with 6 months warranty We have a TOP selection of bakery machines!

Condition: used, Year of construction: 1991, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Novenco, dust extraction fan radial fan type CNA-400 REX / AZG-S -Engine: 1.35 kW 955 rpm Pedpfjtz Hu Isx Anyorb -Volume flow: 5000 m³/h -Connection: inlet Ø 400 mm -Connection: Output 390 x 280 mm -Dimensions: 1030/590/H800mm -Weight: 70 kg

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Prodpfjrx Rtrox Anyjb Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Year of construction: 2021, condition: like new (used), functionality: fully functional, Brooks Autosampler PreciseFlex 400. Payload: 0.5 kg with servo gripper. Speed: 500 mm/sec. Max. acceleration: 2000 mm/sec². Joint 1 (Z axis): 400 mm. Pjdpfx Anowurp Hoyjrb Joint 2: +/-93°. Joint 3: +/-168°. Joint 4: +/-960° with servo gripper. New and unused in original packaging. Includes functional warranty.

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 400 mm Pedpfxjv Sz Hwj Anyerb -Type: C1-40/25x400 TGL 10906 -Piston rod: Ø 25 mm -Dimensions: 545/100/H70 mm -Weight: 5.8 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,261 h, functionality: fully functional, machine/vehicle number: M-077.084.07, empty load weight: 4,800 kg, Equipment: chip conveyor, MACHINE DETAILS Weight: 4,800 kg Operating Hours Spindle hours: 11,261 h Control system on hours: 125,668 h Pjdpfx Anjxpvwzjyorb EQUIPMENT Conveyor belt (FAMUP 405-1498-1, 352 kg)

Condition: good (used), Year of construction: 1993, total length: 1,400 mm, total width: 795 mm, total height: 920 mm, Manufacturer: ASQUITH Type: TB-1400 Year of manufacture: 1993 3 matching pieces Weight 2300 kg each Taper fabricated construction Specifications Metric US Standard Number of T slots 5 Up and 5 Down Pitch from T to T 260 mm T-slot dimension 28 mm Number of T-slotted sides 2 Dimensions (Estimate) Length 1400 mm Width 795 mm Height 920 mm Predewpvd Ropfx Anysb Weight 2300 kg Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: good (used), Year of construction: 2012, total height: 290 mm, total length: 5,000 mm, total width: 1,750 mm, plate height: 290 mm, Manufacturer: STOLLE Type: Cast Iron Prsdpfxowp Azvj Anyeb Specifications Metric US Standard Length 5000 mm Width 1750 mm Height 290 mm Number of T-slots 10 (7+3) Distance between T-slots / pitch 7x 250 - 3x 500 mm T-slot size 27 mm Weight per plate approx. 8.2 tons Number of matching pieces 1 Dimensions (approximate) Length 5000 mm Width 1750 mm Height 290 mm Weight 8200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you check all important details. Share on

Condition: new, overall weight: 29,000 kg, total length: 7,000 mm, total width: 2,400 mm, plate height: 410 mm, Manufacturer: STOLLE Type: TDV 7/2.4 Year of manufacture: 1990 Specifications Metric US Standard Length 7000 mm Width 2400 mm Height 410 mm Number of T-slots 8 Distance between T-slots / Pitch 300 mm T-slot size 41 mm Weight per plate approx. 29000 tons Number of matching pieces Psdpfx Answp Dd Esyjrb 3 Dimensions (estimate) Length 7000 mm Width 2400 mm Height 420 mm Weight 29000 kg Please note: The information on this page has been provided to the best of our knowledge and belief by us, and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or terms of a contract. We recommend that you check all important details.

Condition: good (used), total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, Manufacturer: STOLLE Type: DTS Year of manufacture: 1990 Specifications Metric US Standard Length 4000 mm Width 2000 mm Height 295 mm Number of T-slots 4 Podpfxjwp E Nco Anyjrb T-slot spacing / interval 400 mm T-slot size 42 mm Weight per plate approx. 6000 kg Dimensions (Estimated) Length 4000 mm Width 2000 mm Height 295 mm Weight 6200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, you will not represent or constitute contractual terms. We recommend you verify all important details.

Condition: used, maximum load weight: 24,750 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 02/2014, loading space length: 13,450 mm, loading space width: 2,480 mm, loading space height: 2,995 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2014, Equipment: ABS, TALSON F1227 THERMOKING SLXe 400 MEGA ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE ON REQUEST ----VEHICLE SPECIFICATION ----TIRES MEGA 235/75R17.5 ----CHASSIS / SUSPENSION FULL AIR SUSPENSION BPW AXLES ----REFRIGERATION UNIT THERMOKING REFRIGERATION UNIT MODEL SLXE 400 TOTAL HOURS: 11,209 H TOTAL OPERATING HOURS: 10,725 H DIESEL ENGINE HOURS: 10,505 H MAINS OPERATION HOURS: 219 H ----INTERIOR DIMENSIONS LENGTH: 13.45 M WIDTH: 2.48 M HEIGHT: 2.99 M ----BRAKES DRUM BRAKES ----* EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) Prodpfsx Rpkgsx Anyeb 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATES AND 15 DAYS AUSTRIA LICENSE PLATE EURO 1 TECHNICAL DATASHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU & third countries, a deposit of at least €500.00 / €1,000.00 will be required (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied) Subject to changes, errors and prior sale! You can find more vehicles on our website Sales are conducted exclusively in accordance with our General Terms and Conditions – see homepage Important Note – Important Information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute legal entitlement. Legal notice: This sales advertisement does not constitute an offer in the sense of §145 BGB. It is information for the initiation of a contract. All details provided here are without guarantee and do not represent warranted characteristics.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 600 mm, turning diameter: 570 mm, spindle bore: 79 mm, Error message: Actuator not operational lots of accessories Psdpfjx Sw Uvox Anyjrb

Condition: good (used), clear span: 3,600 mm, total length: 18,510 mm, shelf height: 1,750 mm, Technical Data for the Pallet Racking System: Racking System: Stow Type: Pal Rack NS Installation Data: Number of rack rows: 1 unit Length per rack row: approx. 18,510 mm Number of bays per rack row: 5 units at 3,600 mm each Number of levels plus ground level: 2 units Volume Data: Pallet locations per bay: 12 units Pallet locations per rack row: 60 units Total pallet locations: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n.d. Max. weight per pallet: 389.50 kg Scope of supply includes: 06x Pallet rack uprights, used Material color: RAL 5015 sky blue Upright type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. horizontal and diagonal bracing, foot plates Uprights are pre-assembled (bolted truss design) Height: 1,750 mm Depth: 1,100 mm 20x Pallet rack beams, used Material color: orange Beam type: PNB0472 Box profile: 120 x 50 mm Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 40x Safety pins, used Material finish: Sendzimir galvanized For securing beams against unintentional lifting 24x Wedge anchors, new Manufacturer: Hilti Model designation: HST2 M12x105/10 Material: galvanized carbon steel Approved for: cracked concrete 12x Levelling plates, used Version: fully galvanized For leveling rack uprights installed on uneven floors 01x Load capacity sign Indicating bay & shelf loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm General information: This item is offered for collection only. Any additional transport or shipping requests will incur extra costs, which can be quoted separately depending on the delivery location and scope. Please enquire with us for further details. Prjdpfxow I Tfno Anyob

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t Prjdpozcd Hlsfx Anyob - Loading onto truck included

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 4.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 9 to 45 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 4000 mm -Base: height adjustable -Dimensions: 4000/360/H1050 mm Predpfjzq Abcox Anyjb -Weight: 328 kg