Used Stenter Frame for sale (12,411)

Condition: used, Year of construction: 2017, Turning device with transport chassis Hitch attachment to the lower link arms, Cat. II Working width 10.70 m Drive: 540 rpm 10 rotors, each with 6 tine carriers Rotor diameter 1.50 m Rotor gearbox hermetically sealed and permanently lubricated Main frame made of square tubes offset by 45° with a wall thickness of 8 mm PERMALINK drive concept: All rotors are movably connected to each other For folding movements up to 180° for a compact transport position MAX SPREAD crop flow concept: Tangential tine arrangement angled by 29.3° to the rear Tines work 33% longer in a forward direction compared to a conventional tine arrangement For approximately 10% higher working speeds compared to a conventional tine arrangement Uniform, wide distribution of the crop Tool-free adjustment of the spreading angle Double coil tines, Ø 9.5 mm, with 5 turns each Tines are of equal length and in Super C tine quality Tine trailing angle adjustable to -7°/0°/+7° Tine loss protection, integrated Protective bar holder made of glass fiber reinforced GRP Warning signs with lighting Tire size, transport chassis: 10.0/75-15.3 10PR Rotor tire size: 8 x outer 16x6.50-8 and 2 x inner 18.5x8.50-8 Prodpj Agh H Eofx Ai Tsc Transport width: 2.98 m Weight: approx. 1,780 kg Hydraulic requirements: 1 x double-acting + 1 x single-acting

Condition: new, Year of construction: 2023, REISCH - Hydraulic TANDEM - THREE-WAY - DUMP TRUCK Vehicle type: RUTDK-140.513 Total weight: 14,000 kg Nose load: 600 kg Axle load: 13,400 kg Unladen weight: 3,580 kg Payload: 10,420 kg Bed size: approx. 5,130 x 2,420 mm Platform height approx.: 1,020 mm Side wall height: 500 mm 1st extension height: Overall length: 7,250 mm Wheelbase: 1,040 mm Pjdpfxs Agh S Rj Ai Torc Coupling height approx.: 750 - 1,150 mm Permissible maximum speed: 105 km/h - Tool box 750 x 350 mm (bracket and mounting) - Shut-off valve for hydraulics - 1 pair of aluminum ramps, load capacity per pair 10,000 kg, Length: 3,500 mm, Width 400 mm, Weight 59 kg/piece, - DIN tow hitch 40 mm, with crank for stepless height adjustment - Front geared winch 12 tons, support feet at the rear under the loading area - Tandem unit with parabolic suspension and mechanical axle compensation - Axles with automatic rod adjusters (AGS) from a leading manufacturer - 2-circuit compressed air braking system with ALB regulator according to EC directives. ABS KB4-TA, spring-loaded parking brake - 24 V system according to STVZO regulations with 5-chamber truck rectangular lights, protected mounting, with fog tail light, license plate lighting, triangular reflectors, lane marking lights, yellow side reflectors, 2 x 7-pole connectors - 2 chock blocks with holder - Tires (4x) 385/55 R 19.5 Body - Steel bed in torsion-resistant, cavity-sealed profile construction - Lashing points recessed, arrangement according to DIN - Profile steel side walls and extensions with laterally pressed wear strips and welded-in reinforcement profiles, side walls and rear wall pivoting and foldable with central locking, front wall fixed, corner posts removable - Climbing aid on the front wall - Hestal locks 664 N on front, side and rear walls - Spring aid on the front wall side with 2 springs mounted horizontally and deflection pulley on the left and right Paintwork - Body and bed in RAL 9005 Deep Black - Rims in silver - Frame galvanized Signage - Reflective contour marking adhesive strips on the sides white, rear wall red

Condition: new, Year of construction: 2023, REISCH - Hydraulic TANDEM - THREE-SIDED - DUMP TRUCK Vehicle type: RUTDK-140.513 Total weight: 14,000 kg Vertical load: 600 kg Axle load: 13,400 kg Unladen weight: 3,580 kg Payload: 10,420 kg Bed size: approx. 5,130 x 2,420 mm Platform height approx.: 1,020 mm Side board height: 500 mm 1st extension height: Overall length: 7,250 mm Wheelbase: 1,040 mm Coupling height approx.: 750 - 1,150 mm Permissible maximum speed: 105 km/h - Tool box 750 x 350 mm (bracket and mounting) - Shut-off valve for hydraulics - 1 pair of aluminum loading ramps, load capacity per pair 10,000 kg, Length: 3,500 mm, Width 400 mm, Weight 59 kg/piece, - DIN tow hitch 40 mm, infinitely adjustable in height with crank - Front geared support winch 12 tons, support feet at the rear under the loading area - Tandem unit with parabolic suspension and mechanical axle equalization - Axles with automatic linkage adjusters (AGS) from a leading manufacturer - 2-line compressed air brake system with ALB regulator according to EC directives. ABS KB4-TA, spring brake parking brake - 24 V system according to STVZO regulations with 5-chamber truck rectangular lights, protected mounting, with fog light, license plate light, triangular reflectors, lane marking lights, yellow side reflectors, 2 x 7-pole connecting plugs - 2 wheel chocks with holder - Tires (4): 385/55 R 19.5 Superstructure - Steel bed in torsion-resistant, hollow-sealed profile construction. - Lashing points recessed, arrangement according to DIN - Profile steel side boards and extensions with side-mounted Prodpfx Ao Agh S Uoi Tsc rub rails and welded-in reinforcement profiles, side walls and rear wall pivoting and foldable with central locking, front wall fixed, corner posts removable. - Climbing aid on the front wall - Hestal locks 664 N on the front, side and rear walls. - Spring support on the front wall side with 2 springs mounted horizontally and deflection roller on the left and right Painting - Superstructure and bed in RAL 9005 deep black - Rims in silver - Frame galvanized Signage - Reflective contour marking adhesive strips on the sides white, rear white, rear red

Condition: used, Year of construction: 2023, REISCH - DUMP TRAILER - R-STONE Vehicle type: RTWK-200.KS550 Total weight: 22,000 kg Nose load: 4,000 kg Axle load (rear): 18,000 kg Unladen weight: 6,090 kg Payload (standard equipment): 15,910 kg Container dimensions: approx. 5,500/5,725 x 2,300 mm Container height: 1,250 mm Floor thickness: 6 mm Platform height approx.: 1,365 mm Tipping angle approx.: 50° Hydraulic tailgate: yes Permissible maximum speed: 40 km/h Equipment: - Frame made of large-volume, high-strength rectangular tube profiles with straight drawbar. - Ball head coupling K80 160x160, 12-hole M 21, ~M9712 - Drawbar in sprung design with 2 rubber dampers, 6-way adjustable - Height-adjustable conduit carrier mounted on the drawbar. - 4-ton nose load, drawbar in additionally reinforced design - Truck 2-speed gearbox support winch - 4-wheel air brake system (two-line) with automatic load-dependent braking (ALB). - Spring-loaded parking brake with release valve and overload protection - Unsprung BPW pendulum tandem axle with individual wheel compensation - Large truck tail light "ECOPOINT ll" in 12 Volt - 2x license plate light - 1 pair of outline lights - 1 set of side marker lights (SML) - 7-pin socket at the rear of the vehicle - WITHOUT additional return line on the front lifting cylinder - Tires 600/55 R 26.5 169D AEOLUS AE74, 10-hole, ET 0, A3 - Plastic quarter panel mudguards - WITHOUT drawbar coupling - Bridge support mounted on the frame Superstructure: - Climbing aid on the front wall - Slide gate with hand lever in the rear gate Predpj Agh S Ajfx Ai Toc Container: - Steel round container STONE-R made of high wear-resistant HARDOX with sloping front wall and front wall protection roof Hydraulic tailgate: - Hydraulically opening tailgate with 2 double-acting cylinders and hydraulic locking block, hook lock Signage: - Screwed-on, RED/WHITE reflective warning signs at the front and rear WITHOUT position lights Painting: - Chassis painted in REISCH-GRAY 22. (RAL 7021 black-grey) - Container painted in REISCH-black 22 (RAL 9005 deep black) Approvals: - 22,000 kg permissible total weight

Condition: new, Year of construction: 2023, Key features: - Working width 2.62 m (tine to tine), transport width 3.00 m - Quick coupler - central locking - Swinging frame - free-swinging pickup Psdpfx As Agh U Esi Tsrc - 5-row tine pickup, double-roller press - Continuous feed auger with 2 conveying paddles - Lifting of feed auger, hydraulic (standard feature from model year 2021) - Tension spring for feed auger, left and right - Wear plates, mounted - Speed adjustment, overload protection - Idler wheels, foldable - Attachment kit for central idler wheel - Implement recognition - ACTIVE CONTOU

Condition: used, Year of construction: 2023, Tool carrier TPZ for Z-kinematics, hydraulic Lifting frame, Z-kinematics Tool carrier operation from the cabin Towing hitch, manual Continuous operation for 3rd auxiliary control circuit 3rd auxiliary control circuit, hydraulic, front Hydraulic quick-release couplings connected, 1 pair Hydraulic oil HVI 400/70 R20 Vredestein Endurion Front fender, standard Travel speed 20 km/h Yanmar 2.2 l, 34 kW, ISO 14396, Stage V Radiator, standard Diesel particulate filter Exhaust pipe, standard Fuel tank, plastic Fuel capacity, standard Transmission mode "active standstill" Drive system Radio including Bluetooth, hands-free system with external microphone Steering column, fixed Driver's seat, fabric upholstery, air-suspended, with seat heating Exterior mirrors, mechanically foldable Multifunction lever Pedpfe Aghxhox Ai Tjrc Side window left, fixed Opening window right, 180-degree opening angle Halogen work lights front, 2 pieces Halogen work lights rear, 2 pieces Halogen headlights Sun visor, front Fine dust filter, class F5 Interior mirror, right Steering column switch Steel bracket for headlights Tilt angle indicator for attachment, mechanical Operating manual, German Germany Approved as a self-propelled working machine - Lo

Condition: new, Year of construction: 2026, - Attach-on single-seed drill - Folding frame Precea 6000-2CC - Row spacing 75 cm - 8 rows - Support wheels in front of the seed rows - Comfortable hydraulics for ISOBUS - Hydraulic fan drive - Fan drive with 6.2 cc hydraulic motor - Hydraulic connection for filling auger or for hydraulic fan drive - Air intake nozzle for fan - Hydraulic, folding rear lights for road travel - Marker Precea 6000 and 6000-2 - Hydraulic connection for marker - ElectricDrive singulation drive - PreTeC mulch tillage coulter with manual coulter pressure adjustment - Seed hopper 70 l - Filling aid for seed hopper - Singulation disc green - corn 5.0 mm - Singulation disc purple - corn 5.5 mm - Optical sensor for seed monitoring 16 mm - Closing section 16 mm - Furrow opener 16 mm - Press wheel 16 mm - Press wheel holder - Wide depth gauge wheels 115 mm closed rim - Press wheel holder - Wide press wheels 50 mm, smooth - Profi-Electronic PreTeC - mulch tillage coulter - Electric fertilizer metering drive, central Prjdpfx Aij Aghzke Tec - Fertilizer applicator for rear hopper - Closing insert for fertilizer applicator opening - Metering wheel 100 cc for fertilizer - Rear fertilizer hopper 1250 l - Loading platform between the seed rows - FerTeC Twin fertilizer coulter with leaf spring overload protection - Filling auger for Precea 6000-2CC - Hydraulic connection for filling auger or for hydraulic fan drive - LED work lights - TwinTerminal 3.0 - Level sensor - ISOBUS machine control - ISOBUS machine cable harness for 8-9 rows - Terminal package AmaTron 4 - ISOBUS - Radar sensor international - Analog work position sensor - GPS-Switch basic AmaTron 4 - GPS-Maps + Coc function for AmaTron

Condition: new, Year of construction: 2026, Chassis: Closed, double C-profile frame, extremely torsion-resistant, highest load-bearing capacity with low tare weight. Suspension: Parabolic spring suspension. Platform: Patented, self-cleaning steel sheet platform in one piece (foil seam fusion) for optimal sliding of the cargo, bent on all 4 sides for optimal stability. Superstructure: Professional superstructure sealing system POWER FLEX + with replaceable, retractable rubber seals with barbs in a patented aluminum rail, metal labyrinth seal on the corner post for the rear walls. Central locking: Swinging wall on the left, right and rear with central locking lever and latch with retrieval capability. Tilting mechanism: Extra strong, widely spaced ball tilting mechanism with conical pan for stability when tipping. Slide: Potato slide with easy-to-operate adjustment lever. Electrical system: LED lighting with resistor for turn signals, 12-volt lighting and turn signal system, 7-pole plug and cable, socket at the rear. Coating / Surface technology (automated): Granulate blasting of the chassis and superstructure, wet chemical cleaning using spray and dip methods, zinc phosphating, KTL coating (cathodic dip coating), cavity coating by dip method, powder coating at 160-180°C, superstructure HB green, substructure black RAL 9005. Roll cover + platform Prodpfj Aga Eyox Ai Tjc Tow hitch at the rear with hydraulic connection. Extensions: 800 + 800 mm Central locking Permissible total weight: 18,000 kg

Condition: new, Year of construction: 2023, New machine ISOBUS as standard Cable for terminal connection, ISOTouch 800 Prjdpo Agbrdefx Ai Tsc Installation kit for ISOBUS Row loosening tines Frame for row loosening tines Row indicator 24x Duo Disc, 12.5 cm Trapezoid disc, 12.5 cm KR tines on handle Heavy-duty harrow, 12.5 cm Pre-emergence marker Additional level sensor Electric high-speed harrow Radar sensor Working signal WorkLight Pro Tank attachment, 1500 l

Condition: new, Year of construction: 2026, Adapter frame A10 for telescopic loaders / Claas Scorpion for mounting attachments with Euro quick-release system Prjdpfx Aj Agalysi Toc with mechanical locking Color: RAL 7043 - gray Mounting: Scorpion / Kramer KT (50/435/50x960)

Condition: new, Year of construction: 2026, Adapter frame A10 for telescopic loaders / Claas Scorpion for attaching implements with a Euro quick-change system Prsdpfe Agal Dex Ai Tec with mechanical locking Color: RAL 7043 - gray Mounting: Scorpion / Kramer KT (50/435/50x960)

Condition: used, Year of construction: 2026, Adapter frame for wheel loaders / Claas Torion 535 for mounting attachments with Euro quick-change system Design: with mechanical locking Additional cost for mounting: wheel/telescopic standard: €2,500 Color: RAL 7043 - gray Mounting: Liebherr (40/313/40x860) Prjdpfxs Agamde Ai Tsc

Condition: used, Year of construction: 2020, 2x 6m cultivator frames, 75cm row spacing (conversion to 50cm possible), parallel-linked cleaning units, 1500mm wide parallel tines, hydraulically foldable, S-tines at the front, double angled shares at the rear, parallel-linked row protection plates, complete spring-loaded row harrows, electric wheel steering via the tractor's gyroscope, prepared for ISOBUS section control, 8x section widths for section control, tires 270/95 R32, 3D optical lane assistant camera, second camera for wedge-shaped objects, complete ISOBUS control unit, K80 ball-head coupling, pneumatic braking system. Podpfxs Agar Rj Ai Torc

Condition: used, mileage: 149,000 km, power: 140 kW (190.35 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,000 mm, loading space length: 3,500 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat with us now via WhatsApp: Get in touch with our sales consultant quickly and easily. Attention!!! Sales preferably to commercial businesses. Internal ID number: [ 3386 ] ----Optional extras: Psdpfx Aozbzfpsi Torc * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV & AU (technical inspection and emissions test) * Nationwide delivery * Financing possible, even without a down payment * Spring offer: Upon request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * 1st owner * Euro 6 standard * Accident-free * High + Long * Trailer hitch 2,500 kg * Automatic climate control * Cruise control * Reinforced springs * Rearview camera * Bluetooth multimedia system * 3 seats Special equipment: Hill start assist, trailer hitch: ball head, for increased towing capacity - 3.5 t, trailer socket 13-pin, outside temperature display, ceiling light in the cargo area with door contact, Success package, digital tachograph, downloadable, windows for rear doors, window in the cargo/passenger compartment: - fixed, front right, generator 180 A, rear door (opening angle 270 degrees), wooden floor in the cargo area, cargo area partition with window, navigation system Becker MAP Pilot, roof rails with integrated step, smoker's package, spare wheel holder under the end of the frame incl. jack, rearview camera 138 degrees, interior mirror, seats in the driver's cab: driver's seat comfort, stabilizer rear, stabilizer front reinforced, shock absorbers reinforced, lining in the cargo/passenger compartment: plywood, fleece battery 95 Ah Additional equipment: 3rd brake light, adaptive brake light, airbag driver side, indicator for washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake assistant, braking system with ABS+ASR, roof lining in the driver's cab, glove compartment lockable, body/superstructure: high-roof panel van standard, child safety lock, fuel filter with water level sensor, fuel tank: main tank 75 liters, load securing/lashing points, headlight range control, model update, engine 3.0 L - 140 kW CDI CAT, wheelbase 3665 mm, tire repair kit with compressor, low emissions according to Euro 6 exhaust standard, sliding door cargo/passenger compartment right, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval display Assyst, heat protection glazing, permissible total weight 3.50 t ----Do you want to lease or finance? We offer attractive offers – even without a down payment! Please contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 AM – 6:00 PM Sat: 9:00 AM – 2:00 PM ----Note: All information on the Internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, mileage: 64,900 km, power: 109 kW (148.20 HP), first registration: 06/2015, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,600 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales preferably to commercial customers. Internal ID number: [3398] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German technical inspection) & emissions test * Nationwide delivery * Financing possible, even without a down payment * Spring offer: Upon request and for a surcharge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * Immediately ready for use * Accident-free * High and long * Trailer hitch up to 3,500 kg possible * Reinforced springs * Rear-view camera * Automatic climate control * Bluetooth multimedia system * Navigation system * Cruise control * LED daytime running lights * Metallic paint * Alloy wheels * Chrome package Predpfezc Dn Nex Ai Tsc * Comfort equipment * 3 seats Special equipment: Storage compartment in the roof lining of the driver's cab, dashboard "Techno", exterior mirrors electrically adjustable and heated, cruise control system including speed limiter, rear wing doors with glazing, heated rear window, infotainment system: UConnect with CD and MP3 player, with navigation unit, automatic climate control, upholstered headrests, black radiator grille frame, cargo area partition with window, light alloy wheels 6x16 (V-spoke), metallic paint, smoker's package, full-size spare wheel (including spare wheel holder), headlight surround black, sliding door load/passenger compartment right with glazing, seats in the driver's cab: double passenger seat, bumpers in vehicle color, daytime running lights LED, rear-view camera, tinted glazing, decorative strip front bumper in aluminum look Other equipment: Driver's airbag, turn signals integrated into the exterior mirror, brake assistant, body/structure: high-roof box van standard, body variant: high roof, crankcase ventilation heated, cargo area partition (grid) behind the driver, steering column (steering wheel) adjustable, engine 2.3 L - 109 kW JTD CAT, wheelbase 3450 mm, tire repair kit, low emission according to exhaust standard Euro 5, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: passenger seat adjustable with armrest and lumbar support, seats in the driver's cab: driver's seat height adjustable, seats in the driver's cab: driver's seat with armrest and lumbar support, water sensor fuel filter, oil level sensor. ----Do you want to lease or finance? We offer attractive deals – even without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only for the general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or by written assurances. Vehicles with a mileage of more than 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: used, New: No VAT/margin: VAT qualifying Fits to following machines: Volvo L 30 G Please contact Sjoerd Overbeek for more information Podpfxj Agi H Ij Ai Torc

Condition: used, New: No VAT/margin: VAT qualifying Prede Agizmspfx Ai Tec Fits to following machines: Caterpillar 906 Please contact Sjoerd Overbeek for more information

Condition: new, Year of construction: 2026, operating hours: 1 h, empty load weight: 1,610 kg, Limited-Time Offer! DK 6030 HST - €1500,- While supplies last, take advantage of this offer! Kioti DK6030 HST ROPS frame (Newest model, previously DK 6020 HST) Hydrostatic transmission (Also available with a mechanical 16/16 gearbox with creeper gears) Very practical and maneuverable tractor Life is too short to drive a boring tractor!!!!! - ROPS safety frame at the rear - Hydrostatic transmission, 3 ranges, 2 pedals, 0-30 km/h - 3-cylinder 60 hp Turbo diesel engine, 1826 cc, Stage 5 - Fuel tank: 48 liters - Wet disc brakes - Hydraulic power steering - Hydraulic system: 36.4 l/min external - Standard: 2 double-acting valves at the rear - Cat 2 three-point hitch with quick-release hooks - 1717 kg between the drawbar pins - 1467 kg 61 cm behind the drawbar pins - PTO: Fully independent, 540 rpm Prodpfx Aie Agl Tgs Tsc - Rear drawbar, lower - Weight: 1610 kg - Standard tires: 9.5-16/12.4-28, 1.59 m wide Limited-Time Offer! - Excludes 21% VAT - Ready for use - Available in Mijdrecht Optional extras at an additional cost: - Easy Speed and Cruise Control (recommended) - Galaxy Garden Pro (as shown) 280/70R16 front 420/70R24 rear, 1.77 m wide - 60 cm wide tires at the rear - Front loader, 1207 kg lifting capacity at pivot point, 2.76 m - 3rd function on front loader - Front three-point hitch, front PTO - Adjustable drawbar, pin adjustment - or Scharmueller multi-stage drawbar (quick adjustment) - Also available with a 1.5 m track width, as desired, etc. AJ VAN ZIJTVELD VOF Your Kioti Specialist

Condition: used, New: No VAT/margin: VAT qualifying Fits to following machines: JCB 409 B ZX Predpfo Agiauex Ai Tec Please contact Sjoerd Overbeek for more information

Condition: used, Year of construction: 2023, Fortuna FTM 160/5.0 Permissible total weight: 19,000 kg Permissible vertical load: 2,000 kg Frame supports: Double T-beams, Type IPE 270 Hopper length: 5,000 mm Hopper width: 2,200/2,250 mm (tapered) Tilting angle: approx. 52 degrees - 40 mm ring hitch for 2,000 kg vertical load (40 km/h), Manufacturer: SCHARMÜLLER, mounting dimensions: 100 x 110 mm - Drawbar, rigid design - Hose holder (galvanized) at the front for supply lines - 10 t. support jack, manufacturer: JOST, with load and fast travel function, Footplate telescoping - Floor made of 4 mm steel S 355 (fine-grain steel) - Hopper wall made of 4 mm steel S 355 (fine-grain steel), wave design - Removable aluminum ladder on the front wall, including parking bracket on the hopper wall, on the left side when facing forward - Hopper height 1,500 mm including viewing window (W x H: approx. 860 x 520 mm) and acrylic glass pane - Acrylic glass pane (W x H: approx. 1,320 x 420 mm) in front of the viewing window - Hydraulic tailgate including hook lock (fixed bolts) and shut-off valves - Grain slide (H x W: approx. 250 x 385 mm) with lever and chute, chute removable - Telescopic cylinder including cardan suspension, 2,470 mm stroke, 5-stage oil requirement: approx. 24 liters, lifting capacity of the first stage at 200 bar: approx. 34 t. - Shut-off valve directly on the telescopic cylinder - Ball bearing swivel located far to the outside at the rear - Two-line compressed air braking system with automatic load-dependent brake force regulator (ALB) including release valve and manual spindle parking brake - Suspended by 20 t. parabolic suspension with pendulum equalization, axle distance: approx. 1,360 mm - Mechanical spring axle support (rubber-mounted) - Suspension mounted above the axles - Brake axles, manufacturer ADR Wheel connection: 10-hole, from 22.5 inches Axle cross-section: 130 x 130 mm Brake: 406 x 120 mm Track width: 1,900 mm - 4 pcs. wheels 560/60 R22.5 155 D, manufacturer: VREDESTEIN Flotation Pro Height: approx. 1,250 mm Width: approx. 560 mm Load capacity per axle at 40 km/h 10.56 t / 3.2 bar 65 km/h 7.76 t / 3.2 bar - Wheel offset / ET: Zero (no offset) - Two wheel chocks incl. wheel chock holders - Mudguards (for 40 km/h version) - Underrun protection made of galvanized square tube, screwable - Pin coupling on the cross member, 8,000 kg trailer load at 40 km/h, cross member prepared for the installation of an automatic trailer coupling - Socket at the rear, 7-pole - Lighting system according to StVZO for 12 volts - Power supply cable to the towing vehicle, 7-pole for 12 volts - Triangle-shaped rear reflectors, yellow side reflectors and Pedps Afixusfx Ai Tjrc license plate lighting - Rear lights - Rear position lights (red/white) - Single-color paint Vehicle is completely primed including top coat. MAS142480 Price applies to the existing condition. Offer subject to change. Errors, modifications and prior sale are reserved. All information without guarantee.

Condition: used, Year of construction: 2018, Kemper 375Plus -Wider channel 8000 -Rigid frame, ready for Comfort Suspension -Automatic clutch -Automatic height control (AHC) -RowSense steering assist Podpfx Aj Aflanji Tsrc -Includes Kemper 300F Comfort Suspension MAS165080+MAS165100 Price applies to the current condition. Subject to change. Errors, modifications, and prior sale reserved. All information without guarantee.

Condition: new, Year of construction: 2026, Horsch Joker 6 CT Disc Harrow Year of manufacture: 2026, new machine Precise and rapid stubble cultivation Applications Shallow and intensive mixing of stubble Incorporation of organic fertilizer, catch crops, or heavy crop residue Effective seedbed preparation with optimal reconsolidation High performance High working speeds of up to 20 km/h Uninterrupted operation thanks to paired arrangement of the discs with a large clearance and open frame design High quality of work Toothed discs for secure penetration into the soil and intensive mixing Relatively small, fast-rotating discs for the production of fine soil Very wide rubber mounts for consistent cutting angle and quality of work Precise depth control with optimal reconsolidation Easy handling No adjustment of disc angle or offset required Only the working depth needs to be adjusted Robust design Maintenance-free, permanently lubricated bearings for the DiscSystem discs Resistant and maintenance-free rubber mounts for soil adaptation and overload protection Reconsolidation RollFlex Packer Ø 54 cm – 130 kg/m Pods Afvhpopfx Ai Torc Technical data Working width (m) 6 Transport width (m) 2.95 Machine height in transport position (m) 3.40 Length (m) 2.90 Weight (kg)* 3 DiscSystem disc Ø (cm) 52 DiscSystem disc thickness (mm) 6 Number of DiscSystem discs 48 Cutting angle DiscSystem (degrees) 17 DW control valves 1 (+1 with hydraulic depth adjustment) Power requirement (kW/hp) 130-175 / 180-240 Implement attachment 3-point Joker CT 3-point Cat. III/IV * Weights of the machines in minimum/maximum configuration Equipment - including DiscSystem 2-row Ø 52 cm, attachment Cat. II/III - III/IV, lighting - RollFlex Packer Ø 54 cm - Hydraulic depth adjustment - Side deflectors - Toothed discs Ø 52 cm - Operating manual Price applies to the existing condition. Sale is made excluding any warranty and guarantee to commercial customers. Subject to prior sale, changes, and errors. Illustrations may show special accessories that are not included. No liability for errors in the product description and technical data. You can find more interesting offers on our homepage at

Condition: new, Year of construction: 2025, -8000 standard row -Heavy-duty package with standard knives -Mounting frame prepared for chassis -Automatic clutch -Automatic height control (AHC) -3rd central button for height control -Guide bar for interlaced crops -Guide tube for the outer front bar -RowSense steering assistance -Includes Kemper 300F chassis with cloths Psdpfxs Afmidj Ai Tjrc MAS291300 Price applies to the current condition. Offer subject to change. Errors, modifications and prior sale are reserved. All information without guarantee.

Condition: new, Technical data for the base plate: Shelving system: Bito Type: Pro Included in the scope of delivery: Prsdpfx Ae Afn U Iei Tjc 01x Base plate, new Material color: Sendzimir galvanized Type: M For frame profile: P4, P5, P6 Material thickness: 6 mm Overall width: 150 mm Overall depth: 105 mm Height: 32 mm Weight per piece: 0.66 kg / piece Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: excellent (used), functionality: fully functional, Hydraulic single-piston screen changer – screen diameter approx. 60 mm – in top condition For sale is a hydraulic single-piston screen changer in very good, well-maintained condition. The screen changer was previously installed on a Leistritz extrusion system and is already completely mounted with a hydraulic unit on a mobile steel frame. Technical data and features: Design: Hydraulic single-piston screen changer Prjdpfx As Af I S Uoi Tec Screen diameter: approx. 60 mm Operation: Manual hydraulic control via hand valve Hydraulic unit: Already installed Frame: Sturdy steel construction on rollers Condition: Very good / top condition Availability: Available from the Wuppertal warehouse The screen changer is operated via a manual hydraulic valve (see photos). An on-site inspection in Wuppertal is possible at any time by arrangement. If you have any further questions, please do not hesitate to contact us.