Used Superfinishing Device for sale (11,296)

Year of construction: 1983, condition: used, machine/vehicle number: 80295, load bearing: 300 kg weight: 550 kg Iedpfx Ao Rw Nqsdkotg height of constuction: 1000 mm

Year of construction: 1988, condition: used, machine/vehicle number: 8855, lifting capacity: ca. 300 kg stroke: 1500 mm fork length: 4 Traggabeln, 600 mm weight: ca. 80 kg dimension: 1500 x 920 x 1340/2070 mm Iedjb Nwi Nopfx Adkjtg

Condition: used, for Morse taper: MK 3 Itedscftvwjpfx Adkog incl. test pin, storage box

Condition: used, for Morse taper: MK 2 Itodpecftvxjfx Adksg incl. test pin, storage box

Condition: new, Measuring area: 75 - 88 mm Iodpfx Asd Efd Iodketg

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Ijdoyqr Sxspfx Adkotg

Condition: excellent (used), I offer a professional hydraulic rescue device from the renowned company LUKAS, model LSP 44 B. The equipment is used in rescue operations (e.g., fire brigade) and is distinguished by its very high build quality and reliability. Technical condition: Itsdpfx Aoyxrbdedksg The device is fully functional, tested, and ready for operation. It shows normal signs of use as visible in the photographs. Technical specifications: Manufacturer: LUKAS / FAG Kugelfischer Model: LSP 44 B Type: DSH-20-2 Power supply: 230 / 240 V Motor: Leroy Somer, approx. 1.1 kW Country of origin: Germany Set includes: Hydraulic power unit Hydraulic hoses Hose reel Working element as shown in the photographs Application: Technical rescue Fire services Emergency services Hydraulic work

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 200 mm, Kuris KV2002 UVV Straight Knife Cutting Machine for Textile Manual Cutting Iedpoyvgghefx Adkotg Manufacturer: KURIS - KRAUSS & REICHERT Condition: Used, very good, all wear parts replaced with new ones! We are an authorized KURIS service partner and specialist dealer. The electric straight knife cutting machine, KURIS KV-2002 model, offered here is in excellent technical condition and fully operational. A comprehensive inspection has been carried out by our specialist workshop. This machine is already equipped with UVV safety protection. The UVV protection meets the latest safety regulations required in Germany. All necessary wear and spare parts have been freshly replaced. The manual cutting machine can be inspected and tested on site. Cutting height: approx. 200 mm Weight: approx. 15 kg Current new price: EUR 6,687.99 (gross) Connection: 400V 50Hz CEE-16A Power: 790W Shipping within Germany possible – PICKUP PREFERRED! Packaging and freight costs are borne by the buyer. These costs will be clarified on request/purchase according to current rates. NOTE on warranty/liability: This item comes from a business liquidation. Items confirmed as coming from a business closure can be inspected and, within the scope of possibilities, tested for functionality on site. The following applies: purchased as seen/inspected – under exclusion of any warranty or guarantee claims. The buyer accepts these terms with purchase. COMMERCIAL SALE: You will receive a proper invoice with VAT shown upon purchase. Subject to errors and prior sale.

Condition: used, Year of construction: 2001, liter capacity . l Isdpfx Adjyuy Tlekjtg feed pressure . bar coolant capacity . l

Year of construction: 2023, condition: ready for operation (used), Two vacuum lifting devices from Hegla and Bystronic for the glass industry are available. 1) Hegla Isofix LN6-D90-250, year of manufacture: 2023, load capacity: 250kg, suction cups: 6. 2) Bystronic, load capacity: 350kg, suction cups: 4. Documentation available. An on-site inspection is possible. Itedpfx Adeyv H Hpeksg

Year of construction: 2011, condition: excellent (used), I sell the Stacking / Destacking device MEINERT (IMA Group) P620 E/S - 2500 / 1300 System, year 2011. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Rotating head Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Iedpfx Adeh Hp Dtokstg Working capacity apprx 16 tacts / min Material thickness 10 - 50mm Min. Material size 250 x 320 mm Max. Material size 1300 x 3000 mm Total area covered L.10.200mm x W.8700mm Total power 45kW Year 2011. Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Weight: 20 kg Itsdpfohma S Rsx Adksg Ultrasonic frequency: 38 kHz Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Total power consumption: 1,600 watts Sweep: yes

Condition: used, • Type: DSH2/12V • Suction type: 150K • Year of manufacture: 2013 • Serial number: 84 • Suspension capacity: 900 kg vertical/horizontal • Each suction cup: 150 kg vertical/horizontal • Can rotate and tilt Itjdpeywi Dmjfx Adkeg

Condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces Itsdpfx Asd Tg Dcjdksg -Inner width: 1075 mm -Interior height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Year of construction: 2025, condition: new, - Panel width 710 mm - Backgauge Isdpfeh Ramgjx Adkjtg - Adjustable stroke

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 280 h, load capacity: 1,500 kg, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Special equipment Load centre: 600 Mast type: Triplex Isdpfxoyty E Eo Adkstg Condition: As new Technical condition: Very good Description: Machine fully workshop-checked, cleaned, UVV and inspection newly carried out!

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Ijdpeyvzznsfx Adkotg Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Installed power: 4 kW Maximum peak current: 7 A Maximum operating current: 3 A Power cable cross section: 4 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Power: 3.1 kW Itodpfx Ajvkdkijdkjg

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm Iedpfx Aewktn Ajdkjtg • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Condition: new, Year of construction: 2026, Mill without screen Xtra2-A / 26.26 St Low-speed mill without screen, with two coarse crushers, compact and mobile on 4 wheels, 2 of which with brakes. The feed hopper and cutting chamber can be easily and completely opened via a hinge mechanism and quick lock, which allows for quick and easy cleaning. Shredder-type rotor with two primary coarse crushers, each with three crushing fingers, which also allow for the crushing of awkward and larger pieces of scrap. Control with contactor and electrically redundant safety limit switches. The control unit is integrated in a plastic housing, including a 4-meter connection cable and a CEE 16A/6h plug. Standard Z-hopper made of transparent polycarbonate (PC) sheet with a wide loading opening. Collection box for ground material with a capacity of 8 liters, includes a suction hose for connecting a pipe with a diameter of ND 38 or 40 mm. Technical data: • Motor power: 1.5 kW Itedpfx Ajwktvgodksg • Power supply: 3 x 400 V, 50 Hz • Cutting chamber opening: 260 mm x 260 mm • Primary shredders: 2 pieces, each with 3 shredding fingers • Rotor speed: 32 rpm • Rotor: multi-tooth, 3 pieces • Static knives: 2 x 3 hardened knives • Cutting configuration: standard cutting module 4 mm (rotor tooth width); optional 5 mm

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 07-02275, total width: 420 mm, total length: 450 mm, total height: 950 mm, input voltage: 230 V, overall weight: 70 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Tool holder: SK 40 MACHINE DETAILS Operating voltage: 230 V Frequency: 50/60 Hz Connected load: 50 W Dimensions & Weight Dimensions (L x W x H): 450 x 420 x 950 mm Machine weight: 70 kg Ijdpfx Adjyr E Atjkstg External reference: Lot 1

Condition: used, Loading utility 500 Liter weight 0,3 t dimensions 1750 x 730 x 1080 m Itodpsyrhvcefx Adkog Electric tipper - Operating time with a fully charged battery: 8-10 hours - Battery charging time: 6-7 hours - Hydraulic tipping

Year of construction: 2018, condition: excellent (used), TOMRA T-705 BC Single, used selective waste collection device, MFG: Feb. 2018, serial: 606657-90162001-60642, German language menu, German and English user guide, service history, made in Norway This is a device dedicated to commercial spaces or locations where large volumes of single-use or reusable containers are collected, as well as shuttles with such containers. The TOMRA T-705 selective collection device is fast, being specially designed for heavy traffic and a high demand for the collection of recyclable or reusable containers. SPEED Instant recognition of barcodes and security markers without stopping the rotation Reduced waiting times when inserting containers one after another Increased availability during peak hours CLEANING Requires less time dedicated to cleaning compared to other RVMs Cleaning the device is easier and takes less time Less time dedicated to cleaning the device, a more attractive device TWO MODELS Device designed for both the collection of reusable and non-reusable containers Device designed for both reusable container crates and non-reusable container crates Both models feature touch display and TOMRAPlus interface Price: 3900 Euro + VAT, negotiable , ExWorks Oradea /Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Itedpfx Adowz Rtkjksg Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana.

Condition: used, length 5000 mm width 1150 mm depth 2000 mm There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Itjdpfxeyqvxvo Adksg possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, length 3500 mm width 1000 mm depth 1300 mm There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Iedeyqvlpopfx Adketg Your Markus Hirsch Team