Used Table Rotative Pour Aléseuse Rotating Boring Table for sale (26,800)

Condition: used, Year of construction: 2021, Load capacity: 4.5t, shaft diameter: 68mm, max. hydraulic pressure: 370bar, rotator flow rate: approx. 25-40l/min, torque: 850Nm, bending moment: 3000Nm. An on-site inspection is possible. Fpsdpfjz Da R Eex Afusn

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS01, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. By combining the OPRS carriage, ARYA system, and cable system, it ensures precise film guidance, automated wrapping cycle management, and improved load securing at critical pallet points. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; Fsdpfez Irr Ajx Afuepn – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; FILM APPLICATION SYSTEM Arya: Automatically applies the film to the product. Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: ready for operation (used), Year of construction: 1983, operating hours: 8,529 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, The machine was modernised and overhauled in 2002! TECHNICAL DETAILS Working spindle diameter: 100 mm Spindle speed range: 1,800 rpm Taper: ISO 50 Spindle travel (W): 630 mm Travel X-axis: 1,200 mm Travel Y-axis: 1,120 mm Travel Z-axis: 950 mm Table clamping surface: 1,000 mm x 1,120 mm Table load capacity: 3,000 kg MACHINE DETAILS Control system: HEIDENHAIN TNC426 Motors and drives: SIEMENS Operating hours (as displayed): Control system on-time: 37,038 h Machine operating time: 30,987 h Program run time: 8,529 h Spindle run time: 12,156 h Fpedpfx Afey Edgfeuon EQUIPMENT Handwheel: HR410

Condition: used, This listing is for TSI Airflow LCA501 in Case. The unit is in full working condition and ready for immediate use. TSI Airflow LCA501 digital vane anemometer with carry case. Designed for high-accuracy air velocity and volumetric flow measurements in HVAC and lab safety applications. Features logging, data download, and 100mm reversible head. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Fpodpfeyx Igiox Afusn • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 4.6209, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,750 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 1,120 rpm, workpiece weight (max.): 3,000 kg, The last conventional machine standardly produced by TOS VARNSDORF Solid design Also available in CNC version RET100B and the overhauled machine W100A-R MAIN PARAMETERS Workspindle diameter 100 mm Clamping taper 50 ISO Spindle speed range 1120 rpm Table transversal travel (X) 1600 mm Headstock travel (Y) 1120 mm Table longitudinal travel (Z) 810 / 1250 / 1750 mm Spindle stroke (W) 900 mm Table clamping surface max. 1500 x 1500 mm x mm Table loading capacity max. 3000 kg Fpedpfjfk I Niox Afusn

Year of construction: 1989, condition: excellent (used), For sale: 1 used machining/drilling table Manufacturer: Skoda Fpsdpfx Aog Sbbmjfuen Type: E20OB22875 Year of manufacture: 1989 Dimensions: 2,000 x 2,000 mm Part weight: up to 25 tons Electrically adjustable Weight: 10 tons

Condition: good (used), functionality: fully functional, 1 x Fette FS 20 1 x Fette FS 30 With a 25 mm shank, suitable for turret presses, e.g., Traub TB/TK or Index B. The holders can be inspected at our warehouse. Fpsdjz H H Hfepfx Afujn

Condition: used, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,060 mm, Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ Fsdpsztf Scjfx Afuspn - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: used, Year of construction: 1987, Technical details: table diameter: 500 mm table height: 70 mm rotatability of the table - manual/mechanic: ja ° weight of the machine approx.: 300 kg space requirements of the machine approx.: 0,92x0,650x0,19 m T-slots are 3 pcs longtitudinal and 1x transverse in the middle existing Fpodpfx Aou Nkm Eefuen a=18mm h=30mm b=30mm c=13mm *

Condition: used, table diameter 790 mm table load 500 Kg Fpsdjyx Ip Rspfx Afuen swivelling range 0 - 135 Grad turning speeds max. 2,0 U/min connected load frequency 400 V weight 0,95 t Dimensions (LxWxH) 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key

Condition: new, Year of construction: 2025, neu 2025 030138 prompt, Zwischenverkauf v Deutschland 3444.77 € 1 13 mm MK 2 220 mm 40 - 4000 U/min M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment Fodpfx Afsxcbhrouspn - Piece counter - Spindle stop function (spindle stops automatically after drilling) Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500)

Condition: used, Year of construction: 2006, functionality: unexamined, We are offering here a rotary table from the brand Parkson. The model is PAR-251 R. The rotary table has a diameter of just under 250mm. Fjdpfjxtu Efex Afuspn Feel free to contact us for a non-binding offer.

Condition: good (used), Year of construction: 2007, The Offringa Rotator 1600 box rotator is suitable for removing sprouts from potatoes in boxes. By rotating the box, the potatoes are put into motion, causing the sprouts to loosen. This results in less smearing compared to tipping the potatoes through a receiving hopper. After rotating, the machine tilts the box back so that the product is levelled evenly inside the box. Adjustable: Rotation speedNumber of rotationsTiltingProduct levelling Max 160 cm boxesBox turner Typically used in agriculture (potatoes, onions, etc.)Hydraulic tipping / unloading function for above a receiving hopperWith Remote control More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Fpodjz Rf Abepfx Afuon Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Rotary table, Skoda S80M, 3550x4000 mm Capacity: 80 tons Clamping dimension: 3550x4000 mm Travel: 2500 mm Table indexing: 1 degree Fodpsz H Hzisfx Afuopn Weight: approximately 52 tons

Condition: excellent (used), functionality: fully functional, load capacity: 4,000 kg, Severt manual column lift and rotation device, including matching perforated table 1500 x 1500 x 200 mm for bolting, included. Optionally available with tooling for perforated table accessory set. Excellent condition (see video). Hydraulically height adjustable, minimum 800 mm, maximum 2400 mm. Load capacity 4000 kg. Perforated table 1500 x 1500 x 200 mm, type 28 mm. Fpedpfx Ajyli Uyofusn

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2792.28 € Fjdpey Hf Rzefx Afuepn 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.410 with intermediate table and table height adjustment via toothed rack OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Holp Vario Bucket / VL.112.421 / incl. swivel drive / RotoTop 121 / MS08 / HARDOX / NEW / in stock & immediately available Fpsdpfeyhymcjx Afujn Price: €13,020.00 net / €15,493.80 gross - Excavators from - to: 7 tons – 14 tons - Weight approx.: 460 kg - Capacity SAE: 400 liters - Angle of repose: 54 ° - Radius of bucket bottom: 150 mm - incl. Holp RotoTop 121 swivel drive - The bucket is made entirely of HARDOX. Advantages of the Holp Vario Bucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction - Round bottom - Two working openings - Rectangular working opening - V-shaped - The Vario bucket impresses with its high performance and clean operation. It enables precise dumping through the V-shaped opening and offers very high digging performance in dragging mode. Wherever more speed and flexibility are needed for handling a wide variety of tasks, the Vario bucket is a real asset on the construction site: It is faster, more adaptable, and safer. We have many other Holp products in our warehouse that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sales excepted! = More information = New: Yes Intended use: Construction Unladen weight: 460 kg Please contact Marius Herden for further information.

Condition: good (used), Mechandling 579 Rotation reel gripper lifter 2009, Stainless, ultra powered rotation reel gripper, mobile, 12V Fodpfxoz It E Dj Afuopn

Condition: excellent (used), Year of construction: 2001, AN VERY RARE OPORTUNETEY TO BUY AN EXCELLENT MACHINE WITH HUGE AMOUT OF TOOLINGS, DRAWERS, CLAMPING EQUIPMENT... OWER 400 EXPENSIVE TOOLINGS CNC BORING MILL WOTAN RAPID 1 RETRIFITTED 2001 WITH HUGE AMOUNT OF OVER 450 TOOLING VERY LOW HOURS WORKING TIME DATA: CONTROL ON: 8001 H Fedpfjvkkf Hex Afuepn MACHINE POWER ON: 13692H PROGRAM RUN: 4650 H SPINDLE S1 TIME: 4690 H AXIS TIME: 4568H HYDRAULIC ON TIME: 12702 H WE OFFER AN STUNNING EXCELLENT CONDITION WOTAN CNC RAPID 1 WITH HUGE AMOUNT OF TOOLINGS, FOR A SPECIAL STAINLESS WORK. MACHINE HAVE HEIDENHAIN 530 CONTROLS TECHNICAL DETAILS: SPINDLE SPEED : 6,3-1600 U/Min SPINDLE MOVE : Y AXIS : 1250 mm DRILLING SPINDLE MOVE: Z AXIS: 600 mm W : 1000 mm X : 2000 mm B: 360.000 DEGREE SPINDLE DIAMETER: 105mm TOOL HOLDER: ISO 50 WITHOUT TOOL CHANGER CLAMPING: HIDRAULIC MAX TABLE LOAD: 6000 KG TABLE: 1120 X 1400 NUT -BILD 7 ; 22H7 INDEXING 4 X 90 DEGREE TOTAL WEIGHT: 16000 KG DIMENSION OF MACHINE: LENGHT 4800 X BREIT 4665 X HEIGHT 4200

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,300 mm, Max. Tragkraft 7000 kg - Max.Hubhöhe 24.80 m - Maximale seitliche Reichweite 20.50 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Motor Hersteller: Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FTT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - 12V Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 Fedpfxozi Hbds Afuopn - Max. travel speed 40 km/h - Zugkraft 9200 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 300 l - Fassungsvermögen des Kraftstofftanks 320 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 67 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: new, - Horizontal capacity: 500 kg - Vertical capacity: 250 kg - Table dimensions: 550 mm - Electrically tiltable - Foot pedal Fodpswin I Iofx Afujpn - Emergency stop - Documentation - 230 V

Condition: used, Technical details: table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 Fodpfou N Dz Aox Afuspn -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 4758.02 € 18 mm MK 2 240 mm 30 - 3000 U/min M12 355 mm 705 mm 1065 mm 170 kg 100 mm 155 - 415 mm 155 - 550 mm 340 x 280 mm 82 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Fsdoynm Aajpfx Afujpn Continuous/normal drilling performance 18/20 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Coolant device LED lighting with pivot arm Drill package 3 (vice & keyless chuck)

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min max. torque on the faceplate 900 Nm welding current 500 Ampere total power requirement 0,75 + 0,75 kW weight of the machine ca. 0,8 t Fpjdpfx Afjvn Uwusuen Welding rotary tilting table - Remote control with cable - 2 x welding current transmission

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, spindle diameter: 130 mm, spindle speed (max.): 2,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,600 mm Travel Z-axis: 1,600 mm W-axis: 600 mm W-travel (quill extension): 900 mm Boring diameter: 800 mm Spindle diameter: 130 mm Spindle speed: 10 - 2,000 rpm Max. torque at boring spindle: 3,150 Nm Table load capacity: 8,000 kg Table size: 2,000 x 1,600 mm Clamping area: 1,800 x 2,000 mm T-slot width: 28 mm T-slot distance: 160 mm Rapid traverse X-axis: 2,500 mm/min Rapid traverse Z-axis: 2,500 mm/min Feed W-axis: 2,500 mm/min Feed Y-axis: 2,500 mm/min Rapid movement W-axis: 3,150 mm/min Rapid movement Y-axis: 5,000 mm/min Facing slide travel: 320 mm Max. torque at facing slide: 5,300 Nm Max. facing diameter: 1,400 mm MACHINE DETAILS Control: Heidenhain 430 Tool holder: ISO 50 Drive power – spindle motor: 15 - 30 kW Dimensions & Weight Fpjdeyvtrfopfx Afujn Dimensions (L x W x H): 6,000 x 4,000 x 4,000 mm Machine weight approx.: 40 t