Used Townsend Stripper/Casing Separator for sale (7,175)

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. Gsdpfx Alsp I I U Djmobl There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (H x W) Single-sided protective cap Weight per piece: approx. 2.19 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should transport or shipping be required, Gsdpfeyk E T Njx Almjbl additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery.

Condition: new, empty load weight: 625 kg, maximum load weight: 675 kg, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, loading space volume: 6.7 m³, color: silver, construction height: 2,480 mm, working width: 1,920 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with DOORS, refrigeration unit = Arktik 1600 N, sandwich walls, * IMMEDIATELY AVAILABLE * with DOORS, refrigeration unit = Arktik 1600 N, sandwich walls Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1,300 kg - Unladen weight: 625 kg - Payload: 675 kg - Interior dimensions: 250 x 135 x 190 cm (L x W x H) - Overall exterior dimensions: 391 x 192 x 248 cm (LxWxH) - Loading sill height: 55 cm - Tyres: 185/65 R14 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 40mm - Roof material: Thermo sandwich body 40mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: yes - Tailgate: no - Tailgate material: Thermo sandwich 40mm - Tailgate/door function: Refrigerated compartment press lever lock - Clearance dimension rear door/flap: - - Interior light: 230V interior light - Supports: yes 4 pieces - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Overrun device from ALKO - Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door retainer - Rear frame and frame profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - 1800 watt cooling capacity at a cold room temperature of +6 C and an ambient temperature of 30 C - Temperature control range from +2 C to +10 C - Evaporator air volume flow 750 m2 - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light - Large rear lights plug - reversing lights - large safety lighting - integrated rear fog light - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - 100km/H approval with wheel shock absorber - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gbjdpfx Aou Hruxslmol

Condition: new, empty load weight: 740 kg, maximum load weight: 1,960 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,960 mm, loading space width: 1,450 mm, loading space height: 1,800 mm, loading space volume: 8.1 m³, color: white, construction height: 2,380 mm, working width: 1,980 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, insulated floor / walls and roof 40mm ISO panels / refrigeration unit = Arktik 1600 N, * IMMEDIATELY AVAILABLE * incl. insulated floor / walls and roof 40mm ISO panels / refrigeration unit = Arktik 1600 N, Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY! - TÜV: 2 years - Floor: 40mm insulated floor - Gross vehicle weight: 2700 kg - Unladen weight: 740kg - Payload: 1,960 kg - Interior dimensions: 296 x 145 x 180 cm (L x W x H) - Exterior dimensions: 435 x 198 x 238 cm (L x W x H) - Loading sill height: 54 cm - Tires: 185R14C - Brake: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h: at extra charge Vehicle body: - Floor: Thermo Sandwich 40mm floor - Walls: Thermo Sandwich 40mm body - Roof material: Thermo Sandwich 40mm body - Chassis: KNOTT rubber spring axle - Number of lashing eyes: Can be retrofitted as an option - Rear door: Yes - Tailgate: No - Tailgate material: Thermo Sandwich 40mm - Tailgate/door function: espagnolette lock - Clearance dimensions tailgate/flap: 142 x 175 cm (WxH) - Interior light: YES 230V - Supports: Optional - Overrun device & brake: yes, KNOTT - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - 40 mm insulated thermo-sandwich body - Arktik 1600 N refrigeration unit - 1800 watt cooling capacity at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air volume flow 750 m2 - 230 V interior light via refrigeration unit - very sturdy welded steel frame - frame completely hot-dip galvanized - many sturdy cross members, therefore high point load - continuous side members - frame very torsion-resistant due to its sturdy design - interior light - 2 -wing. Lockable rear door with VA espagnolette lock - 2 maneuvering handles at the front - Maintenance-free rubber spring axles from KNOTT - Automatic reverse - KNOTT overrun device and parking brake - Very sturdy bolted V-drawbar - 13-pin plug - Large dimensioned safety lighting plug - large-dimensioned safety lighting with reversing light - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel Accessories optionally available: - aluminum checker plate on the floor - cast coating on the floor - rear supports mounted, the pair - front supports mounted, the pair - 100km/ approval with wheel shock absorbers - lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gbsdou Hru Sopfx Almsl

Condition: new, empty load weight: 825 kg, maximum load weight: 1,775 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,900 mm, loading space volume: 8.6 m³, color: silver, construction height: 2,510 mm, working width: 2,070 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with doors, refrigeration unit = Arktik 1600 N, sandwich walls, * IMMEDIATELY AVAILABLE * with DOORS, refrigeration unit = Arktik 1600 N, sandwich walls Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,600 kg - Unladen weight: 825 kg - Payload: 1,775 kg - Interior dimensions: 300 x 150 x 190 cm (L x W x H) - Overall exterior dimensions: 441 x 207 x 251 cm (LxWxH) - Loading sill height: 55 cm - Tyres: 185/65 R14 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 40mm - Roof material: Thermo sandwich body 40mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: yes - Tailgate: no - Tailgate material: Thermo sandwich 40mm - Tailgate/door function: Refrigerated compartment press lever lock - Clearance dimension rear door/flap: - - Interior light: optional - Supports: yes 4 pieces - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Overrun device from ALKO - Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door retainer - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - 1800 watt cooling capacity at a cold storage temperature of +6 C and an ambient temperature of 30 C - Temperature control range from +2 C to +10 C - Evaporator air flow rate 750 m2 - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light plug - reversing lights - large safety lighting - integrated rear fog light - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-and-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gbsdpsu Hrvcjfx Almsl

Condition: new, empty load weight: 531 kg, maximum load weight: 769 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,330 mm, loading space height: 1,680 mm, loading space volume: 5.5 m³, color: white, construction height: 2,300 mm, working width: 1,850 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, with sandwich body made of PurFerro, 30 mm thick roof/walls, braked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1300kg - Unladen weight: 531 kg - Payload: 769 kg - Interior dimensions: 251 x 133 x 168 cm (L x W x H) - Overall exterior dimensions: 392 x 184 x 230 cm (LxWxH) - Loading sill height: 54 cm - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 15mm - Walls: 30mm PureFerro sandwich structure (sheet steel/polyurethane/sheet steel) - Roof material: 30mm PureFerro sandwich structure (sheet steel/polyurethane/sheet steel) - Chassis: ALKO rubber spring axle - Number of lashing eyes: Lashing eye rail inside on the side, incl. 4 lashing eyes - Rear door Yes, single-leaf - Tailgate: No - Tailgate material: - - Tailgate/door function: espagnolette lock, stainless steel - Interior light: Yes, with switch + LED lighting - Supports: at an extra charge Overrun device & brake: Yes, Knott - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - Overrun device from ALKO - Floor plate 15 mm thick - Side walls and roof : sandwich construction made of PurFerro, 30 mm thick - core made of foamed polyurethane with a top layer on both sides made of galvanized and polyester-coated sheet steel - sandwich box surrounds are made of anodized aluminium - refrigeration unit (various manufacturers installed, depending on availability) - smooth-running high-performance refrigeration machine with electronically controlled defrosting - 230 volt supply voltage with interior lighting - water-protected control panel with digital temperature display - control range from +2 - + 10 C, - Cooling capacity 1800 watts at + 30 C ambient temperature - Interior light fitted, LED + conventional - Single-leaf rear door - Galvanized espagnolette lock and hinges - Lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - Support wheel - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - lashing straps - additional lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Godpfx Aou Hrurelmsbl

Condition: new, empty load weight: 860 kg, maximum load weight: 1,740 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,530 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3617-26-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - Initial registration: without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 360 x 170 x 190 cm - External dimensions (LxWxH): 542 x 229 x 253 cm - Floor loading height: 53 cm - Perm. Total weight: 2,600 kg - Unladen weight: 860 kg - Payload: 1,740 kg - Chassis: Low loader (wheels next to the body) - Tires: 185/65R14 - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100km/h approval: Optional EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Walls material: Sandwich (sheet steel/foam 40mm/sheet steel) - Roof material: Sandwich (sheet steel/foam 40mm/sheet steel) - Color: Grey - Number of pallet spaces: 6 - Tipping / lowering function: Without - Overrun device/brake: ALKO - Frame/chassis: Aluminium substructure - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, U-profile - Mudguards: Plastic mudguards - Side door: No - Cooling unit: GOVI Arktik 1600 N - Temp. Control range: +2 C to +10 C - Cooling capacity: 1800 W - Rear doors / tailgate: Rear doors - Locks for box body: Press lever lock - Drive-on angle: - - Supports: Yes - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Yes - Rear lighting: Incandescent bulbs, lamps recessed in rear frame - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum control of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing light - Automatic reverse drive - Plastic mudguards - 13-pin plug - Large reversing light - Large reversing light - Large reversing light - Large reversing light Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar Gbedpju Hrvpsfx Almjl

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,180 mm, loading space width: 1,730 mm, loading space height: 1,880 mm, loading space volume: 10.3 m³, color: white, construction height: 2,580 mm, working width: 2,280 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with doors, refrigeration unit / Pure Ferro thermal body, * IMMEDIATELY AVAILABLE * with doors, refrigeration unit / Pure Ferro thermal body Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,500 kg - Unladen weight: 900 kg - Payload: 1,600 kg - Interior dimensions: 318 x 173 x 188 cm (L x W x H) - Overall exterior dimensions: 464 x 228 x 258 cm (LxWxH) - Loading sill height: 60 cm - Tires: 195/65R15 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 30mm - Roof material: Thermo sandwich body 30mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: Yes - Tailgate: No - Tailgate material: Thermo sandwich 30mm - Tailgate/door function: Espagnolette lock - Clearance dimension tailgate/flap: - - Interior light: 12V LED & 230V interior light - Supports: optional - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized in an immersion bath - Continuous side members - Load area made of multi-glued screen printing plate, 18 mm - PurFerro, Thermo-Sandwich construction - sandwich panels with a core of foamed polyurethane with a top layer of galvanized and polyester-coated sheet steel on both sides - insulation 30 mm PU core - rear door stainless steel hinges - espagnolette lock and stainless steel door holder - refrigeration unit (different makes possible, depending on the pictures) - refrigeration capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - air volume flow evaporator: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display is lockable and thus protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - 12 volt interior light - Lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light - Large rear lights - Large rear lights - Large rear lights. Plug - Reversing light - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Accessories can be retrofitted - please enquire: - anti-theft device - rear supports + front supports - 100km/H approval with wheel shock absorber - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Gedpfx Alou Hru Eemebl

Condition: new, empty load weight: 995 kg, maximum load weight: 2,005 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,750 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,560 mm, working width: 2,290 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3417-30-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Interior dimensions (LxWxH): 340 x 175 x 190 cm - Exterior dimensions (LxWxH): 542 x 229 x 256 cm - Loading height of floor: 59 cm - Perm. Gross vehicle weight: 3,000 kg - Unladen weight: 995 kg - Payload: 2.005 kg - Chassis: Low loader (wheels next to the body) - Tyres: 185/65R14 - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing lights Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Gbodpfxeu Hrvij Almol

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available Gsdpjdzqn Usfx Almebl

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches Godpfx Aljhlnznomobl dead weight 660 kg good condition

Condition: ready for operation (used), Good condition. Ready for immediate use. Mobile unit Pressschbeckenseparator M1301 with extra cutting filter SF 300 M1708. Equipped with 2 installed rotary lobe pumps D-SW 70 and conveyor belt. Mounted on a Humbaur 3.5 t trailer. New inspection (TÜV). First registration 12/2020. 887 operating hours. Gsdpfx Alox R Efaomebl

Condition: good (used), Spare parts suitable for a high-performance universal lead and feed screw lathe VOEST DA 210-2000 - Apron (clutch box) Gbsdpfx Aew Sfigolmol - Lead, feed, and shifting screw - End bearing block - Spindle support - Change gears - Rack bars Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Lamella separator 2 pieces identical in construction: - Manufacturer and year of manufacture unknown (probably late 70s) Godet Ay Scepfx Almebl - Rectangular design, with discharge screws to the funnel - Dimensions: Length 9700mm, width 3500mm, height 6100mm

Year of construction: 1992, condition: used, Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm Gbedpfx Alsb Swr Nsmel KW: 2.7

Condition: used, Year of construction: 2014, Kersting belt conveyor Ejector Placer Separator GF 2880-510-400 RA2409 Technical data: Conveyor length (NL): 2880 mm frame width (NB): 510 mm belt width (GuB): 400 mm Overall height (BH): 780 mm intake and 640 mm output Supporting feet: includet Conveying speed (v m/s): with Frequency converter for stepless speed change Drive: Drum motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 100 mm Belt return roller: Ø = 100 mm parcele size: (max 550) x (390...420) x (max 200) LxWxH Controling and pneumatic included Food-safe with stainless steel design Optionally available: Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Gbjdpfxjwkbfve Almol

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Gbsdpfoppyhtex Almsl Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. Gbjdpfx Aljqabm Esmjl It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: excellent (used), GEA Westfalia separator for dewatering industrial and municipal waste water sludge. In excellent condition. Gbjdpfx Aloyf Hw Somol

Condition: excellent (used), Hoshizaki HNC-120AE-L Sushi Display Case Hoshizaki HNC-120AE-L Sushi display case 120 cm Product Description The beautifully designed display cases keep the temperature and humidity at a constant level, unlike air circulation systems that dry out the sushi on display. As a result, the sushi stays fresh longer and the quality is visible at the highest level. The Hoshizaki display cases do not defrost to prevent condensation from dripping onto the displayed sushi. This always prevents contamination of the products. The included presentation grids can be turned upside down to increase cooling capacity. Manufacturer: Hoshizaki Model: HNC-120AE-L Sushi display case Width: 1200 mm Height: 280 mm Voltage: 220-240 Gsdpfx Alsiu U Slemebl wattage: 150 RRP 2900,-€ More freezers in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2010, Sepamatic 2000 T Separator SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Manufacturer: Sepamatic Model: Sepa 2000 T Year: 2010 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Gjdpfx Aeyhmk Delmebl Machine Dimensions LxWxH: 1.300x1.300x1.700 mm Machine Weight: 1.400 kg.

Year of construction: 2021, operating hours: 1,150 h, condition: used, functionality: fully functional, machine/vehicle number: 596091, Wagner NE metal separator 0428/0-18/90/12 G2 RX with residual iron separator neodymium magnetic drum 0421N-30/85-02 and Siemens S7-1200 control, without steel framework, working width: 900 mm ✔ High separation efficiency thanks to an eccentric eddy current system ✔ Effective combination of NE separation and residual iron separation ✔ Precisely adjustable belt speed ✔ Robust industrial design ✔ Modern Siemens PLC control with touch panel ✔ Ideal for continuous recycling processes Gbjdpeyiur Ssfx Almel

Condition: used, functionality: fully functional, The separator is for sale from the company trio-technik ; Filling via funnel with a plexiglass cover Gbsdpfxeuhzvls Almsl L: 900mm W: 700 mm H: 700-1200mm Inclination max. 20 degrees Speed const. Discs can be adjusted

Condition: used, Year of construction: 2011, functionality: fully functional, Donaldson DCE Torit DMC-MMC filter oil mist separator, oil separator, oil extractor, air filter Year of manufacture: 2011 Gbjdpoxri T Uefx Almjl Connection: 400V, 1.5KW Fully functional condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight forwarding possible, please inquire with postal code

Condition: excellent (used), Year of construction: 2012, operating hours: 1,522 h, Fish / Meat Bone Separator Make: Sepamatic Model: 2000VT Built 2012 Low running hours: 1522 Godpfx Ajyckiajlmobl supplied with 2 drums