Used Transmanut Transversal Occ for sale (985)

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Dedpfjzhd Niex Adrocn Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: used, mileage: 797,978 km, power: 290 kW (394.29 HP), first registration: 09/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,840 mm, loading space volume: 45 m³, loading space length: 7,650 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Antos 1840 4x2 Frigo Carrier 1250 MT VIN: 160500 Chassis / Components: * Wheelbase: 5,500 mm * Full / Air Suspension * Tires: 315/70 R.22.5 * Remaining Tread: Front ~20/90 %, Rear ~30% * Snow Chains * Aluminum Diesel Tank * 1 x Ad-Blue Tank * 2 x PVC Storage Boxes * LBW-Bär BC 2000 S4-L4 Cab: * Classic-Space S * 2300 mm, Tunnel 320 mm * Storage compartment above engine tunnel * Rearview camera, side camera * Automatic climate control * Radio * Lane Keeping Assist Dcsdpszu Uddofx Adron * Adaptive Cruise Control * AUX / USB Body: * Wilke Refrigerated Box * Refrigeration Unit: Carrier Supra 1250 MT * Diesel operating hours: 11,316 hrs, Electric operating hours: 1,635 hrs * Mains operation * 3 x Evaporators * 2 x Longitudinal Partition * 3 x Transverse Partition * Load securing rail, 1 x per side * Cargo space: 7.65 m x 2.48 m x 2.38 m, approx. 45 m³ * LBW Bär BC 2000 S4-4L, 2 tons lifting capacity, Year of manufacture: 2017 * Operating pressure max. 220 bar Engine / Transmission: * 394 hp / 290 KW // 10,677 ccm // Euro 6c * Powershift 3 / Automatic * Retarder * Differential lock Weights: * Gross Vehicle Weight: 18,000 kg * Tare Weight: 12,165 kg * Payload: 5,835 kg Other: * 1 previous owner * German vehicle * New MOT, available upon request // Next inspection: 02/2027 ---- New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we attach great importance to customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day passes / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling customs formalities We will gladly help you in handling customs matters.

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: Dodozxc Ncepfx Adrscn - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: used, CITIZEN CINCOM R 04 VI is a CNC automatic lathe / Swiss-type lathe designed for high precision, accuracy and reliability. It features 6 axes and 2 spindles, max. turning diameter 4 mm, max. turning length 40 mm, internal spindle diameter 9 mm, max. threading diameter 3 M. Main specs: up to 20000 t/min, spindle power 0.5/0.75 kW; tool-holder count 3 with 15 stations; turning tools 5, drilling tools 4, transverse tools 2; tool shank 8 mm; counter-operation 4 tools. Voltage 50 Hz 3x400 V; machine weight ≈850 kg; dimensions L1485×W560×H1410 mm. Accessories: LNS TRYTON 107 Hybrid bar feeder, parts catcher, coolant system, lamp. Ensures tight tolerances; suited to watchmaking, medical, automotive, aerospace and precision components. Dodjzv I D Hepfx Adrjcn

Condition: used, mileage: 234,000 km, power: 115 kW (156.36 HP), first registration: 11/2018, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 6,000 mm, loading space length: 3,600 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [ 3512 ]---- Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options available even without a down payment * Trade-in of your vehicle, old or new Optionally bookable: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test Dcsdpszwtrlofx Adron * Nationwide delivery---- Summer offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT deductible German vehicle Accident-free 1st owner Euro 6 standard 3rd gear is difficult to engage High + long Rear view camera Trailer coupling = 3,500 kg Air suspension Cruise control Automatic climate control Cargo area power generator Comfortable driver's seat Cargo area wood-lined Bluetooth multimedia function Special equipment: Storage compartment on the dashboard with USB connection, trailer socket 13-pin, trailer socket preparation, audio navigation system: CD player MP3-capable, USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, digital tachograph, rear door (opening angle 260 / 270 degrees), automatic climate control, refrigerant compressor 170 ccm, interior filter: pollen filter, smoker's package, spare wheel in driving condition, spare wheel holder between the longitudinal supports Additional equipment: Airbag driver's side, traction control system (ASR), design: S-series, exhaust pipe on the left side, exterior mirrors electrically adjustable and heated, ceiling light in the cargo area, electronic brake force distribution, front axle suspension: transverse leaf spring, split doors at the rear, windshield and side windows tinted, generator 150 A, speed limiter 160 km/h, body/structure: high-roof box van, instrument cluster with pixel matrix display, fuel tank: 70 liters, cargo area partition, headlight range adjustment, engine 2.3 liters - 115 kW diesel, wheelbase 3520 mm, tire repair kit, low emissions according to Euro 6 emission standard, sliding door loading/passenger compartment right, seats in the driver's cab: passenger single seat, 3-way adjustable, steering-AV overhang, maintenance indicator, permissible total weight 3.50 t ---- Do you want to lease or finance? We offer attractive deals - also possible without a down payment! Feel free to contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typing errors and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: ready for operation (used), Year of construction: 2025, operating hours: 600 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 225 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 800 mm, spindle motor power: 18,500 W, total height: 2,365 mm, total width: 2,085 mm, overall weight: 8,900 kg, controller manufacturer: FANUC, controller model: 0iTF PLUS, product length (max.): 4,210 mm, number of axes: 5, This 5-axis Leadwell LTC-25iSMY was manufactured in 2025. It features a maximum turning diameter of 590 mm and a turning length of 770 mm. The machine is equipped with a powerful spindle speed of 3500 rpm and a robust tool head with 12 positions. If you are looking to get high-quality turning capabilities, consider the Leadwell LTC-25iSMY horizontal turning machine we have for sale. Contact us for further details regarding this machine. • Capacities • Max. turning diameter above the bed: 590 mm • Max. turning diameter above the transverse support: 590 mm • Max. turning diameter: 430 mm • Max. turning length: 770 mm • Max. rod diameter: 78 mm • Max. workpiece weight: 39 kg • Axes and travels • Z2 (counterspindle) travel: 780 mm • Min. C1 axis positioning increment (main spindle): 0.001 • Min. C2 axis positioning increment (counterspindle): 0.001 • Main spindle • Chuck size: 254 mm • Spindle taper: A2-8 • Spindle bore: 89 mm • Spindle drive type: Fanuc A P30/6000i • Counterspindle • Max. speed: 4000 rpm • Chuck size: 210 mm • Taper: A2-6 • Max. rod diameter: 66 mm • Power: 15 kW Dodpfjzw D Drex Adrjcn • Spindle drive type: Fanuc A 12/7000i • Turret / tooling (EWS tool head) • Clamping system diameter: BMT65 • Number of positions: 12 • Max. external tool size: 25 x 25 mm • Max. internal tool clamping diameter (threading): 40 mm • Neighbor tool change time: 0.8 s • Max. tool change time: 1.3 s • Max. speed of driven tools (axial): 4000 rpm • Max. speed of driven tools (radial): 4000 rpm • Rotary tool drive power: 4.5 kW • Rapid feeds • X: 15,000 mm/min • Z: 20,000 mm/min • Y: 7,500 mm/min • Z2 (counterspindle): 20,000 mm/min • Control • Fanuc 0iTF PLUS with 15" LCD, Manual Guide i, Ethernet • Machine input: 65 kVA Additional equipment • Collet clamping • Hydraulic chuck 254/3 (10"), bar max Ø77 mm, 3500 rpm • Renishaw HPMA tool probe (motorized arm) • High-pressure coolant 20 bar through tool head • Workpiece blow-off nozzle above main spindle • Workpiece blow-off nozzle above counterspindle • Cassette chip conveyor with chip container • Counterspindle with chuck 203/3 • Workpiece removal shovel with container • Preparation/interface for bar feeder • Beacon alarm (machine status light) • Oil separator for coolant emulsion (from lost lubrication) • 3 pcs axial rotary unit BMT65 • 3 pcs radial rotary unit BMT65 • 4 pcs double-sided holder for external turning BMT65 • 4 pcs double-sided holder for internal turning BMT65 • 1 pc single-sided holder for internal turning • Filtermist extraction FX5002 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, mileage: 768,738 km, power: 290 kW (394.29 HP), first registration: 09/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,830 mm, loading space volume: 45 m³, loading space length: 7,650 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, M-Benz Antos 1840 4x2 Frigo Carrier 1250 MT VIN: 160855 Chassis / Components: * Wheelbase: 5,500 mm * Full / Air suspension * Tires: 315/70 R.22.5 * Remaining tread depth: Front ~20/40%, Rear ~60% * Tire chains * Diesel tank, aluminum, 390 L * 1 x Ad-Blue tank * 2 x PVC storage box * LBW-Bär BC 2000 S4-L4 Cab: * Classic-Space S * 2300 mm, tunnel 320 mm * Storage compartment above the engine tunnel * Rear-view camera, side camera * Automatic climate control * Radio * Lane keeping assist * Adaptive cruise control * AUX / USB Body: * Wilke refrigerated box * Refrigeration unit: Carrier Supra 1250 MT * Diesel operating hours: 10,929 hrs, Electric operating hours: 1,462 hrs * Mains operation * 3 x Evaporators * 2 x Longitudinal partition * 3 x Transverse partition * Load securing rail, 1 x per side * Load compartment: 7.65 m x 2.48 m x 2.38 m, approx. 45 m³ * 3 x Interior lighting (LED strips) * LBW Bär BC 2000 S4-4L, 2 tons lifting capacity, manufactured in 2017 * Operating pressure max. 220 bar Engine / Transmission: * 394 hp / 290 KW // 10,677 ccm // Euro 6c * Powershift 3 / Automatic * Retarder * Differential lock Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 12,165 kg * Payload: 5,835 kg Other: * 1 previous owner * German vehicle * New MOT, available upon request // Valid until 02/2027 ---- New main inspections / safety checks or weight reductions/increases are available upon request. We will be happy to assist you in obtaining export/transfer license plates, and a transfer of your purchased vehicles within Germany is also possible. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Dcedezu Dxdepfx Adren The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and seriousness. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transport We will gladly help you with the organization of special transport. Day passes / export license plates We will gladly help you in obtaining export license plates / short-term license plates. Handling customs formalities We will gladly help you with the handling of customs matters.

Condition: used, mileage: 473,829 km, power: 350 kW (475.87 HP), first registration: 07/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2027, color: white, gearing type: automatic, emission class: euro6, loading space volume: 16 m³, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, parking heater, * Sun visor * ABS * ASR * Radio * On-board computer * Auxiliary heater * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Driver comfort seat * Seat heating * Longitudinal and transverse locks Dodpfxszwahto Adrjcn * Air dryer * Trailer coupling * 2-line air connection * Duomatik air connection * Active Brake Assist * Roll stability control * Attention assist * Tire pressure monitoring system * Lane keeping assist * Air horns * Sunroof * ESP * Reversing warning * Cornering lights * Xenon headlights * 12-speed * Suspension: Air * Payload: 10925 * Continuous brake: High Performance Engine Brake ----Special body: Crane: Palfinger PK 23001 L TEC3, maximum lifting capacity 5.35t, elevated operator station, pilot control, 3-way hydraulic extension, fully hydraulic outriggers, oil cooler, engine start/stop, 6th + 7th control circuit for rotary servo and grapple operation. Measured load diagram: Lifts at 6m-3.55t, 8.5m-2.4t, 11m-1.78t, 13.5m-1.42t.----Body: Construction materials tipper, front panel raised, hardwood floor, lashing eyes, 2-part side walls with damper relief, foldable center beam, Kinnegrip locks.----Axle load measuring system, Fuel Performance Pack 1, Powertrain Pack 1 Sale only to commercial customers. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT + ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales negotiations are our general terms and conditions (see the legal notice for details).

Condition: used, mileage: 447,689 km, power: 350 kW (475.87 HP), first registration: 06/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: yellow, gearing type: automatic, emission class: euro6, loading space volume: 11 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, navigation system, * Sun visor * ABS * ASR * Radio * On-board computer * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Sunroof * Longitudinal and transverse differential locks * Tandem trailer coupling * 2-line air connection * Hydraulic connection for trailer * Rear window * Driver's comfort seat * Seat heating * AP axles * All-round warning light, orange * Navigation system * Reversing warning Dedpfx Adeztha Njrscn * Air intake on top * Air horns * Off-road driving program * 12-speed * Suspension: leaf spring * Payload: 13590 * Continuous brake: engine brake ----Body: Meiller 3-way steel, front wall raised with excavator protection.----Windshield tinted, Fuel Performance Pack 1 For sale only to commercial businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales discussions.

Condition: good (used), functionality: fully functional, Feed rates continuously adjustable in all 3 axes Spindle travel 60 mm Table surface 600 x 250 mm Spindle speeds 45 - 1950 rpm Feed rates 10 – 470 mm/min...continuously adjustable... Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Vertical travel (Z) 320 mm Dsdpjzucriofx Adrscn

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000, Year of manufacture 2010 / Commissioned 2011, Siemens 840 D control system, Travel distances X 10,000 mm, Y 1,500 mm, Increased spindle carriage stroke: Z 1,000 mm, Increased through-height 1,000 mm, Through-width 1,500 mm, Main drive 36 kW, n = 6,000 rpm, 720 Nm 2-stage gearbox 1:4 SK 50 tool holder Machining performance in C45: Full drilling D=120mm, threading M55, milling 100cm³/min Gantry design with movable portal bridge and stationary machine table. Dedpjzua N Sefx Adrecn Machine table with clamping bars in the transverse direction, each with 750 mm spacing. The standard plate fields are omitted. Gantry-style machine Hydraulic clamping device with clamping bridges for machining shafts, including hydraulic system Angle drilling & milling head, n = 4,000 rpm, SK50 High accuracy and stability due to Hirth gearing Automatic tool change in the angle head Measuring probe RWP20.50-M Swinging operation Safety fence with light curtains, manufacturer Sick Machine table with clamping bars in the transverse direction, each 750 mm Tool chain magazine on the portal stand with 30 positions Machine coolant system Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, adjustable in height by motor Partition wall with viewing panel Chip conveyor with hinged belt design Installation and alignment elements

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard Dcsdpfexnzlhex Adron safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 1,100 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 470 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, workpiece height (max.): 600 mm, overall weight: 6,700 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, tool weight: 6,000 g, number of axes: 3, This 3-axis FAMUP MCX 1000 vertical machining centre was manufactured in 1997. It features a longitudinal travel of 1,100 mm, transverse travel of 480 mm, and vertical travel of 470 mm. The machine includes a tool magazine capacity of 30 positions and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the FAMUP MCX 1000 vertical machining centre we have for sale. Contact us for further details. Dodpfezxzygjx Adrjcn - Machine Status / Usage History: Ran approx. 5 years in 2-shift operation, remainder in 1-shift operation; hour counter not available- Control Unit: Siemens Sinumerik 810M GA3- Longitudinal Travel (X-axis): 1,100 mm (with pallet changer)- Transverse Travel (Y-axis): 480 mm- Vertical Travel (Z-axis): 470 mm- Pallet Table Usable Area: 1,000 x 450 mm (2 pallets)- T-Slots (Pallet): 5 x 14 x 80 mm- Table Load Capacity: 600 kg- Pallet Change Time: 9 sec- Spindle Speed: 50 - 8,000 rpm (High Speed Spindle option)- Spindle Taper: SK 40 / ISO 40 (DIN 69871)- Spindle Motor Power: 11.25 kW (30 min) / 9 kW (S1 continuous)- Working Feed Rate (X, Y, Z): 10,000 mm/min- Rapid Traverse (X, Y, Z): 24,000 mm/min- Tool Magazine Capacity: 30 positions (chain magazine)- Max Tool Diameter: 110 mm- Max Tool Length: 280 mm- Max Tool Weight: 6 kg- Tool Change Time: 3 sec (5 sec chip-to-chip)- Total Installed Power: 18 kW- Overall Machine Dimensions (L x W x H): 3,500 x 3,150 x 3,000 mm- Additional Equipment & Accessories: - 4th-axis CNC Rotary Table (250 mm diameter) with pneumatic tailstock - Portable electronic handrail / handwheel - Replacement bellows for Z-axis - Various timing belts for machine and 4th axis - Collet holder for chain magazine - Rigid tapping (tapping without length compensation chuck) - Splash guard cabin with halogen work light - Coolant system with integrated wash nozzles for optimal chip flow - Chip tray / pan - Automatic central lubrication system - Electrical cabinet cooling / heat exchanger Technical Specification Taper Size SK 40

Condition: used, mileage: 26,479 km, power: 177 kW (240.65 HP), first registration: 07/1994, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Equipment: all wheel drive, parking heater, Construction/Refurbishment: * SO-vehicle LF16-12, * Manufacturer: Schlingmann, * 3 roller shutter doors on each side (left and right), * Lighting mast, * Auxiliary drive, * Front warning lights, * Rosenbauer pump with 224 operating hours, * 3 rotating beacons, * 2 towing eyes at the front, * Additional headlights, Equipment: * Spacious cab, * 4-door, * Engine brake, * 4x4 drive, * Longitudinal and transverse differential locks, * Off-road gear, * Flame start system, * Tires: 10 R 22.5 Other: * 1 previous owner, * Axle loads: Front axle 5,500 kg - Rear axle 9,200 kg, * Payload 4,920 kg according to ZLB, * Gross vehicle weight 13,500 kg Since 1972, we have been your reliable partner for everything related to cars and commercial vehicles in 28832 Achim, near the Bremer Kreuz. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We offer attractive financing options with favorable special conditions. If you are interested, we will be happy to prepare an individual offer for you! Trade-in of your commercial vehicle is possible. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. Dsdpfx Ajzywwwjdrecn The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical errors and data transmission errors. Listed equipment may need to be verified separately. Subject to change and prior sale.

Condition: used, mileage: 67,879 km, power: 96 kW (130.52 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,704 mm, total width: 2,059 mm, total height: 2,765 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1154. NB35453 ----EQUIPMENT * Hardwood cargo area floor (Delignit) with anti-slip coating - with 3 recessed airline rails running transversely * High-mounted LED exterior light, downlight, rear * LED lights in the cargo area * Load securing package - airline rails on the side walls, right and left, at a height of 550/1575 mm (rear-wheel drive) and 650/1675 mm (front-wheel drive) - allsafe JUNGFALK set for load securing including 2 ratchet straps - 2 hooks (KERL Butler) for use in combination with the airline rails - hardwood cargo area floor (Delignit) * Technology Package 10 - windshield, heated, windshield wipers with rain sensor - Park Pilot system front and rear, active emergency brake assist (camera-based) - lane keeping assist with driver drowsiness warning and automatic high beam assist, additionally with lane departure warning - headlight assist with day/night sensor - cruise control - reversing camera, with image display of the rear driving path in the multi-function display - LED downlight - fog lights - Ford audio system with 4" multi-function display * Radio: Ford audio system with 4" multi-function display DAB/DAB+ - Connected Radio (FM/AM) - digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - FordPass Connect - 4" TFT multi-function display (10.16 cm screen diagonal) - 4 speakers, antenna - integrated control panel and audio remote control on the steering wheel - Bluetooth, USB port and hands-free system - emergency assist * High side wall paneling up to the roof * Central locking with remote control * 6-speed transmission * ABS, EBD and DRIVER ASSISTANCE * Airbag, driver side * Exterior mirrors, electrically adjustable and heated * Battery: Extended battery life * On-board computer * Roof, high * Double-wing rear door 256°, without window * Rev counter * Third brake light * Power windows, front * Ford Easy Fuel * Generator, high-performance version * Halogen headlights with daytime running lights * Glove compartment with lockable lid * Interior lighting with delay function * Air conditioning, front * Fuel tank 70 l * Paint: Solid color paint * Cargo area lighting * Steering wheel: Faux leather steering wheel * Steering column, adjustable * MyKey key system * Fog lights * Emergency assist * Package: Technology Package 9 * Particle filter: Diesel particulate filter Djdszh Snaopfx Adrjcn * Sliding door step light, automatic * Sliding door: Sliding door, right * Mud flaps, rear * Side protection strips * Power steering * Seat belts * Seats: Seat Package 13 * Start-stop system * Partition (plastic) at the height of the B-pillar * Rear step * Recirculation mode * Lashing eyes * Immobilizer * Heat-insulating glass, slightly tinted * Central locking with remote control * Overhead storage compartment, front ... and more ----The vehicle has not been refurbished! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We would be happy to accept your vehicle as a trade-in. Financing / Leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, working width: 2,500 mm, wire diameter (max.): 7 mm, mesh size: 6,000 mm, AUTOMATIC BUNDLING AND STACKING SYSTEM FOR WELDED WIRE MESH Industrial unit consisting of a Schlatter/Jäger SAB-2 bundling machine + a Schlatter SPH stacking machine, designed to automate the output of a welded wire mesh production line. The system performs the final operations of the line: receiving and transporting the mesh via roller tables, forming and bundling packages, stacking, and preparing them for subsequent removal, storage, or shipment. The unit does not need to operate in conjunction with a Schlatter welding machine. It can be integrated and connected to welded wire mesh production lines from any manufacturer, with the corresponding mechanical, electrical, and control adaptations required for the installation. This allows the unit to be used as: Automation of a currently manual line output. Replacement of an old bundling/stacking system. Expansion of an existing line. Independent end-of-line system for Schlatter machines or machines from other manufacturers. Main technical data SCHLATTER / JÄGER SAB-2 BUNDLING MACHINE Year: 2005 Model: SAB-2 Maximum mesh width: 2,500 mm Wire diameter: 5–7 mm Wire strength: max. 450–600 N/mm² Longitudinal/transverse spacing: ≥ 80 mm Maximum stacking/package height: 800 mm Roller track height: 250 mm Approximate power: 4 kW Power supply: 400 V / 50 Hz Compressed air: 6 bar Djdpezych Isfx Adrocn Control: Siemens S7 PLC SCHLATTER SPH STACKING MACHINE Year: 2005 Model: SPH Maximum mesh width: 2,500 mm Mesh length: 4,000–6,000 mm Stacking system with 4 lifting stations Approximate lifting height: 700 mm Maximum capacity: 12 tons Stacking accuracy: ±10 mm Approximate power: 4 kW Control: Siemens S7 PLC Roller tables included

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine Dcodpfjzv S Snex Adrsn For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool automatically adjustable tools Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Transverse cutting tolerance: max. ± 2 mm Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request.

Condition: like new (used), Kunzmann WF 7/3 Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Dcsdpfx Adszy Uh Tsren Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: new, Year of construction: 2026, 540×250 Surface Grinder (MYS1022) is a compact machine designed for precision grinding of small and medium-sized metal components. Its robust construction and advanced technologies ensure high machining accuracy and reliable operation in demanding industrial environments. Main advantages of the 540×250 (MYS1022) surface grinder The 540×250 (MYS1022) magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as hydraulic feed in two axes and precision guideways with a solid construction, ensuring reliability and high machining efficiency. Its compact dimensions and high accuracy make it an excellent choice for smaller workshops and production facilities where space is limited. Key benefits include: High grinding precision – maximum grinding area of 540 × 240 mm and transverse feed accuracy of 0.02 mm ensure excellent surface finishing quality. Compact construction – dimensions of 1800 × 1400 × 1800 mm and a weight of 900 kg allow easy installation in smaller production facilities. Smooth hydraulic feed system – two-axis feed system enables precise movements with transverse speed up to 600 mm/min, ensuring efficient machining. Stability and durability – robust construction with double guideways minimizes vibrations, guaranteeing stable operation during intensive use. Easy maintenance – centralized guideway lubrication reduces manual maintenance requirements and increases machine availability. Ready for operation – the machine is fully equipped for immediate production, minimizing setup and downtime. Machine design and technology Robust construction and precision components The MYS1022 surface grinder features a heavy-duty construction weighing approximately 1000 kg, providing excellent stability during machining operations. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishes. The spindle, driven by a 1.5 kW motor, operates with a grinding wheel measuring 200 × 20 × 32 mm, enabling efficient processing of various metal materials. Dcsdpskkcm Uefx Adrsn Technical specifications Parameter Value Table dimensions 500 × 250 mm Longitudinal / transverse travel 560 × 260 mm Maximum grinding area 540 × 240 mm Maximum distance from table to spindle centerline 490 mm Table guideways Double guideway Transverse movement per vernier scale division 0.02 mm Transverse movement per handwheel revolution 2.5 mm Vertical movement per vernier scale division 0.01 mm Manual vertical movement per handwheel revolution 1.25 mm Grinding wheel dimensions 200 × 20 × 32 mm Grinding wheel speed 2850 rpm Main motor power 1.5 kW Hydraulic oil tank capacity 80 L Hydraulic pump motor power 1.5 kW Coolant pump motor power 40 W Machine dimensions 1800 × 1400 × 1800 mm Weight 1000 kg Standard equipment Magnetic table Grinding wheel Grinding wheel holder Cooling system Chip separator with magnetic filter Halogen lighting system Technical documentation (DTR) CE declaration

Condition: excellent (used), drilling depth: 1,000 mm, overall weight: 20,000 kg, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 380 mm, drill diameter: 40 mm, rotational speed (max.): 4,200 rpm, table length: 1,000 mm, table width: 800 mm, table load: 9,000 kg, feed length W-axis: 500 mm, Equipment: rotational speed infinitely variable, IMSA DEEP HOLE DRILLING MACHINE, MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS 1250 TRANSVERSE AXIS (MILLING SPINDLE) 380 mm TRANSVERSE HEAD TRAVEL 500 mm VERTICAL TRAVEL 1000 mm MAXIMUM DRILLING DEPTH 1000 mm MAXIMUM DRILLING SPINDLE SPEED 4200 RPM MAXIMUM DRILLING DIAMETER 40 mm MAXIMUM MILLING SPINDLE SPEED 4000 RPM MAXIMUM THREADING SIZE M 40 Dcsdpfx Asytff Dsdron MAXIMUM MILLING DIAMETER 65 mm SPINDLE TRAVEL 380 mm ROTARY TABLE DIMENSIONS 1000x800 MAXIMUM WEIGHT WITH STATIONARY TABLE 9000 KG MAXIMUM WEIGHT WITH ROTATING TABLE 4000 KG TOTAL MACHINE WEIGHT 20,000 KG

Condition: used, functionality: fully functional, Year of construction: 2020, overall weight: 630 kg, load capacity: 5,000 kg, Transverse 4-strand chain for 5.0 tons Load capacity: Total 5000 kg + maximum load capacity per transverse beam 2000 kg Dcedpfjziz Tzjx Adrsn 1 longitudinal beam frame: 4000 mm long x 1000 mm wide - with 4-strand chain and oval ring for attaching to the crane hook. 3 pcs. movable transverse beams, 6 pcs. attachment plates.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 215 mm, spindle bore: 41 mm, turning diameter over bed slide: 380 mm, turning length: 1,000 mm, total length: 2,900 mm, total width: 1,050 mm, total height: 1,410 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 30 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, The lathe underwent a general overhaul in 2011 by M-MOOS spol. s.r.o. During the overhaul, it was fitted with an Omron Varispeed 7 frequency converter for convenient speed regulation during operation and to reduce current surges. The lathe's accessories include: a fixed and a movable steady rest, a faceplate, 2 chucks, a clamping angle, a rotating center for the tailstock (Morse 4), a micrometric stop for longitudinal and transverse feed, 1 coolant system with a pump, and an operating manual. Technical parameters: swing over bed 380 mm, swing over carriage 215 mm, distance between centers 1000 mm, bed width 340 mm, spindle bore 41 mm, spindle taper metric 50, tailstock center taper MORSE 4, spindle speed range 30 - 2800 rpm, main DC motor power 10 kW, maximum machine dimensions: length: 2900 mm, width 1050 mm, height 1410 mm, machine weight 2000 kg. The overhauled lathe was used for maintenance purposes by a large manufacturing company. The machine can be tested in our warehouse in Přerov by appointment. Dsdpfxszy Shwo Adrscn

Condition: new, mileage: 50 km, power: 100 kW (135.96 HP), color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, power assisted steering, - Rear air suspension - Front air suspension - Mr. Rudolph will be happy to assist you by phone at: Djdpfxeyrw Rve Adrjcn Engine: 2.3 l D EVIe 100kW (136hp), HI-MATIC 8-speed automatic transmission, rear axle suspension: air suspension, rear axle: single wheels, vehicle version: standard chassis with cab, wheelbase: 3450 mm, standard configuration, seats non-heated, passenger seatbelt pretensioner, seats upholstered in fabric, AIR PRO control elements in cab, Connectivity Box 4G incl. TCO service contract, front headlights halogen, EU control device, delete option, light and rain sensor, manual high beam control, bodybuilder interface, tinted windows, rear parking sensors, fuel filler neck in B-pillar, standard vehicle plaque, tire pressure monitoring system (TPMS), emergency brake assistant AEBS with City Brake, MY 2024, standard rear lights, electrically adjustable and heated exterior mirrors, cab width 2000 mm, driver drowsiness detection (Driver Drowsiness Attention Warning), central locking with remote control, speed limiter 160 km/h, COC certificate of conformity, rear wall insulation, traffic sign recognition with intelligent speed assistant (ISA), electric windows for front doors, front airbags for driver and passenger with seatbelt pretensioners, first aid kit, spare wheel mounted at rear frame, 20-liter AdBlue tank under cab, trailer load 3.5 t, spare wheel, dimension matches chassis tires, rear underrun guard, ESP system, steel wheels, 86-liter fuel tank between frame rails, standard single-leaf front transverse spring (plastic), C-profile steel ladder frame, standard suspension, front axle, rear air suspension adaptive, rear axle ratio i 3.59, comfort sound insulation, additional speed limiter, switch for body lighting, 12V 13-pin trailer socket, rear blind spot radar, lane change assistant with door opening warning on both sides + turn assist passenger side, rear-view camera included loose, mirrors for body width 2200 mm, cab rear wall with window, proximity monitoring (MOIS), additional vehicle key with remote control, storage box next to driver's seat with USB port, overhead storage above windshield, adaptive cruise control (ACC) with Stop & Go, grab handle on A-pillar, tires 235/65 R16, ball-type trailer hitch, Eco-Smart function, delete option, White IC 194, generic tire, printed operation and maintenance manual, USB sockets driver and passenger side, My Iveco Infotainment 10-inch with navigation, Alexa voice assistant integrated, passenger bench with multifunction tray and storage compartment, fog lights, air conditioning with climate control, comfort headrests, comfort driver's seat with armrest and lumbar support, height, tilt, and longitudinal adjustment, hydraulically cushioned, leather steering wheel, intelligent traffic jam assistant (TJA), lane centering plus (LC), electric parking brake, and much more. We are happy to provide you with an offer for your vehicle trade-in. If you wish to lease or finance your vehicle, we are pleased to prepare an individual offer for you. Subject to errors and prior sale! Mr. Rudolph will be happy to assist you by phone at: For further information, please visit our homepage: ... ESP, navigation system, particulate filter Engine displacement: 2,287...

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Dodpfx Ajzuyxgodrjcn Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 Dedpfxezuzg Es Adrocn - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.