Used Tschritter Dosing Unit, Gravimetric for sale (38,547)

Condition: used, The Lumag VH500RS is a powerful mini dumper with hydraulic drive and a tilting dump bed – ideal for transporting bulk and piece goods up to 500 kg. Thanks to its robust steel construction, rubber tracks, and compact design, it also navigates narrow passages and challenging terrain safely. The intuitive controls, dual hydraulic pump, and operator platform make it a reliable helper for construction, gardening, or landscaping work. Technical specifications: Engine: 1-cylinder, 4-stroke OHV LONCIN engine Displacement: 252 cm³ Power: 5.2 kW Max. speed: 3,600 rpm Starting system: Recoil starter Drive: Hydraulic Steering: Full hydraulic / control valve Iodpfx Ags Aampms Aotn Tilting container (L x W x H): 855 x 680 x 550 mm Payload max: 500 kg Volume of dump bed: approx. 0.25 m³ Tilting mechanism: Hydraulic, tilting forward Hydraulic pumps: 2 x 10 L/min (at 3,000 rpm) Working pressure max: 180 bar Hydraulic motors: 720 Nm each at 180 bar Working speed (stepless/hydrostatic): Forward / Reverse max. 4.5 / max. 3.2 km/h Ground clearance: 65 mm Max. climbing ability: 15° Track dimensions (H/W): 255/180 mm Overall dimensions (L x W x H): 1495 x 735 x 1224 mm Packaging dimensions (L x W x H): 1690 x 800 x 1160 mm

Condition: used, Description The VP13 Vogesenblitz log splitter offers an impressive splitting force of 13 tons and is powered by a PTO shaft. It complies with the new safety standard EN 609-1 and is equipped with a simple two-hand operation. With two splitting speeds and a maximum splitting length of 115 cm, as well as a cylinder stroke of 105 cm, the height can be lowered without tools. The patented mechanical log lifter with automatic locking is part of the standard equipment. The log splitter features a robust, all-steel base plate, a fast piston retraction, and an ergonomically shaped splitting wedge with a splitting blade length of 265 mm. In addition, it includes a replaceable splitting blade, a 9-position adjustable log clamp, and a brass guide with grease fittings. The VP13 is suitable for category I and II three-point hitches, has a log holder with an adjustable clamp, as well as a holder for an axe and hatchet, and is powder-coated. - 13 tons of splitting force Itodpfx Aj Aamrzsg Aen - PTO shaft drive - Complies with the new safety standard EN 609-1 - Simple and easy-to-use two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter as standard equipment, with automatic locking - All-steel base plate with beveled edges - Fast piston retraction - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Replaceable splitting blade - Left-hand control lever with 9-position adjustable log clamp and gas spring (for wood lengths from 77 cm and diameter from 8 cm) - Brass guide with grease fittings - Three-point hitch, category I and II - Holder for axe & hatchet - Powder-coated

Condition: used, Features       - Forward-moving soil compactor, ideal for rental companies       - Reinforced centrifugal clutch       - Maintenance-free vibration bearings       - Handle can be folded in, perfect for transport and storage Technical Data Gasoline engine Honda GX120 Power 4.0 HP / 3.0 kW Itodpfx Ae Aamruog Ajn Plate size (L x W) 606 x 400 mm Standard pressure: 520 kg/m² / 542 kg/m²* Centrifugal force 13.0 kN at 101 Hz Travel speed 20 m/min Vibration level 3.2 m/s² Max. operating time 293 min Sound power level LWA 105.0 dB(A) Weight approx. 83.5 kg / 87 kg*

Condition: used, Professional generator, standard model. With this generator, Pramac offers high-performance components at an entry-level price. Powerful and robust generator, easy to operate, and always ready for quick deployment. Key Features Frequency Hz 50 Voltage V 230 Power factor cos 0.9 Phases 1 Engine Specifications Engine Manufacturer Honda Model GX200 Engine Cooling System Air Displacement cm³ 196 Intake Normal Rated Speed RPM 3000 Speed Governor Mechanical Fuel Gasoline Oil Capacity l 0.6 Starting System Manual start Dimensions Length (L) mm 640 Itodpfxo Aan Rxe Ag Aen Width (W) mm 458 Height (H) mm 400 Dry Weight Kg 38 Fuel Tank Capacity l 3.1

Condition: used, Working width 46 cm, fixed. Itodpfxs Aapauo Ag Ajn

Condition: used, for ESE 10, 15 Ijdpfe Aapanox Ag Aotn

Condition: used, Features - Portable assembly compressor in an oil-free design - Maintenance-free 2-cylinder unit - Including a pressure regulator for precise adjustment of the output pressure Itodpfx Ago Aan Tgo Ajn - Very quiet, making it ideally suited for indoor use - With rubber feet for vibration-free operation - 2 x adjustable quick-release couplings, size 7.2 - Tank pressure and output pressure display - Extendable handle for easy transport

Condition: used, Description The PERZL forestry trailer, model PRW 14-4, is a high-performance trailer with a load capacity of 14 tons. It features a pivoting drawbar and a pendulum brake. The frame can be extended from 4.00 m to 4.90 m and offers four pairs of stakes with a height of approximately 1.40 m. In addition, the trailer is equipped with a 4-wheel air brake system, tires with a traction profile (500-50-17), a standing platform, a ladder, and a loading crane, model VK 5077. The 4-cylinder swivel mechanism and two cross levers, each with an electric 3rd function, enable precise handling. The HVZ 130 loading grab with a width of 30 cm, the double-acting hydraulic connection, and the flange rotor with 3 tons complete the equipment. The forestry trailer is supplied with a certificate for operating approval and has a loading area of approximately 2.4 m² at 12 tons and 14 tons. - Forestry trailer, 14 tons, with pivoting drawbar - Frame, 4.00 m, extendable to 4.90 m - 4 pairs of stakes, stake height: approx. 1.40 m - 4-wheel air brake system - Tires 500-50-17; traction profile - Standing platform and ladder - Loading crane, model VK 5077 - 4-cylinder swivel mechanism - 2 cross levers with electric 3rd function each - Loading grab, model HVZ 130 / 30 cm wide - With double-acting hydraulic connection - With flange rotor, 3 tons - Pendulum brake - Incl. certificate for operating approval Itsdpfs Aapc Aex Ag Ajn - Loading area at 12 tons + 14 tons = approx. 2.4 m² Technical data, trailer PRW 14: Total weight: 14 tons Unladen weight: 3.4 tons Frame length: 4 m Overall length: extendable to 4.90 m Width of loading area: 0.92 m Overall width: 2.38 m (with standard tires) Height of loading area: approx. 0.8 m Overall height of forestry trailer PRW 14 with crane VK 5077: 3.10 m Standing platform with ladder: standard Tires: 500 x 50 x 17, traction profile Brakes: 4-wheel air brake system Height of trailer coupling: approx. 850 mm Height of PTO pump (for oil supply): approx. 600 mm Approval according to StVZO for total weight: 14 tons Type of paint finish: 2K paint Lighting: yes Support leg: yes Height adjustment of support leg with bolts: 4 x Technical data, loading crane VK 5077: Loading crane: VK 5077 Swivel mechanism: 4-cylinder Torque of swivel mechanism: 19 kNm Max. working height: 9000 mm Max. working depth: 3000 mm Extension 1 with: 1750 mm Total weight with mounting bracket: 1180 kg Operating pressure: 185 – 200 bar Base plate for drawbar mounting: 350 x 800 mm With folding legs; distance when folded up: 2.05 – 3.20 m Type of paint finish: 2K paint; red RAL 3020; anthracite gray RAL 7016 Standard equipment - forestry crane VK 5077: Net load moment: 50 kNm Max. boom length: 7700 mm

Condition: used, Description The VPE22 Vogesenblitz log splitter offers a powerful splitting force of 22 tons and combines a PTO drive with a robust, quiet cast iron pump and a 400 V/6.6 kW electric motor with a double pump. It complies with the safety standard EN 609-1 and is equipped with a user-friendly two-hand control and two splitting speeds. With a maximum splitting length of 115 cm and a tool-free lowerable cylinder stroke of 105 cm, it can be used in a variety of applications. The patented mechanical log lifter with automatic locking, a full steel baseplate, and the piston quick return ensure efficiency and safety. Other features include an ergonomically shaped splitting wedge, an interchangeable splitting blade, a 9-position adjustable log clamp, and holders for an adze and axe. The powder coating ensures durability, and the three-point linkage is suitable for categories I and II. - 22 tons splitting force - Combined PTO drive with cast iron pump and 400 V/6.6 kW electric motor with double pump - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and easy-to-use two-hand control - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, tool-free lowerable - Patented mechanical log lifter as standard, with automatic locking - Full steel baseplate with beveled edges Itodpfxe Aapdao Ag Aon - Piston quick return - Ergonomically shaped splitting wedge - Splitting blade length 265 mm - Interchangeable splitting blade - Left-hand control lever with 9-position adjustable log clamp and gas spring (for wood lengths from 77 cm and diameters from 8 cm) - Brass guide with grease nipples - Three-point linkage Cat. I and II - Holder for adze and axe - Powder coated Hydraulic winch, mechanically controlled: - Pulling force up to approx. 600 kg - Cable speed up to 0.5 m/s - Limit switch at the cable inlet - 20 m cable with cable hook and safety - Cable Ø 6 mm (Overall height in transport position with winch ~213 cm)

Condition: used, The Nero X-85H is designed for use with tractors in categories I and II and requires an engine output of at least 59 kW (80 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guide is flexible: the scope of delivery includes 90 m of cable with a diameter of 13 mm, including end hooks. The winch can accommodate cables up to 120 m / 12 mm or 100 m / 13 mm. The average cable speed of 0.6 m/s ensures efficient work while maintaining safety. The electro-hydraulic cable payout, the standard manual control, and the remote control enable precise operation from a safe distance. In addition, an emergency control is integrated, which allows for safe operation even in the event of a control failure. A cable infeed brake and speed regulation provide additional protection and controlled operation. The standard equipment also includes a tilt stop, lower cable infeed roller, hitch, and chainsaw holder. With a shield width of 184 cm, a depth of 65 cm, and a height of 230 cm including the protective grille, the Nero X-85H is compact enough for use in confined forest areas, but at the same time offers sufficient protection for the operator. Isdpe Aapdyjfx Ag Ajtn - High pulling force: 8.5 t, braking force 106 kN - Flexible cable capacity: 120 m / 12 mm or 100 m / 13 mm - Quick deployment: PTO shaft included in the scope of delivery, connection cat. I & II - Efficient & safe: speed adjustable – average cable speed 0.6 m/s - Practical operation: electro-hydraulic cable payout, manual control as standard, remote control, emergency control - Additional safety: cable infeed brake - Standard equipment: tilt stop, lower cable infeed roller, hitch, chainsaw holder

Condition: used, Description The VMR16 ESS DP Vogesenblitz log splitter offers an impressive 16-ton splitting force and is powered by a reliable 13 HP Honda gasoline engine. Key features include: - Double pump: For more efficient operation. - Transport trolley: Combined with a trailer suitable for speeds of up to 80 km/h and a ball hitch for easy transport. Itsdpfx Ao Aapfqeg Ajn - Hydraulic positioning: The log splitter can be quickly brought into a horizontal position, which facilitates transport. - Standards: Complies with the requirements of EN609-1 and includes a mechanical log lifter. - Certificates: Includes an EU declaration of conformity and an operating permit. - Lighting system: For increased visibility during transport. - Parking brake: Provides additional safety when parked. - Compact splitter: With a retractable cylinder for a transport height of only 1.90 m. - Safety: Practical 2-hand safety switch and two splitting speeds. - Efficiency: Piston quick return for faster operation. - Ergonomic design: Ergonomically shaped splitting wedge and a replaceable splitting blade ensure ease of use. - Durability: Brass guide and a robust, solid steel base plate provide lasting stability. This log splitter is therefore an excellent choice for demanding log splitting tasks.

Condition: used, for single-axle models 340, 360, 370 HY, 380 HY. Iede Aaphrepfx Ag Ajtn

Condition: used, The YARBO 4-in-1 set, including the Core unit, is a comprehensive all-in-one solution for year-round property maintenance. With a snow blower, lawnmower, leaf blower, and trimmer, the system reliably and efficiently covers all essential tasks around the house. Whether it's snow removal in winter, lawn care in summer, or cleaning tasks in autumn – the YARBO Core adapts flexibly to each season and ensures a well-maintained overall appearance around the property. Your benefits: Complete system including the YARBO Core All essential applications combined in one system Itjde Aanx Aspfx Ag Aen Snow removal, mowing, blowing, and trimming Maximum flexibility thanks to quick module changes Comfortable and time-saving operation Technical data: System: YARBO Core + Snow blower module + Lawn mower module + Leaf blower module + Trimmer module. Area of application: year-round property maintenance. Drive: electric (battery). Function: snow removal, mowing, blowing, and trimming.

Condition: used, The Kipp-Stop system from Holzknecht is an active safety device for forestry winches, designed to prevent typical accidents caused by tipping, overturning, or rolling over of forestry towing vehicles with radio-controlled winches. The Kipp-Stop system can be retrofitted to any electro-hydraulic winch. A wiring diagram showing the socket assignment is included in the operating manual, allowing the system to be connected to any radio system. Winches equipped with this Kipp-Stop system stop the cable pull at the following values: Laterally left/right: 15° (tolerance +/- 3°) In the direction of travel uphill: 25° (tolerance +/- 3°) Itjdpfx Ae Aany Hjg Aon In the direction of travel downhill: 35° (tolerance +/- 3°) The specified inclination limits of the winch must not be exceeded. If the pull function is interrupted by the Kipp-Stop system when the above values are exceeded, the winch must be brought to a position at least 3° below the limit values in order to reactivate the pull function. By briefly activating the pull function three times, the system is disabled, meaning that a single pull can be performed even outside the above-mentioned limits. After that, the system is active again. The Kipp-Stop system can be retrofitted to any electro-hydraulic winch. However, this device cannot guarantee complete protection against overturning! In particular, improper positioning of the towing vehicle (extreme slope, loose ground, etc.), interference from electromagnetic fields, and improper installation of the winch or the Kipp-Stop system can impair the function. The shield of the winch must be exactly vertical when the winch is lowered to the ground. When the Kipp-Stop system is installed, no hydraulic top link may be used!

Condition: used, Description The Atika oscillating circular saw BWS 400-2 impresses with its effective and effortless operation, thanks to a powerful motor and a large-sized carbide-tipped saw blade. It meets the latest European safety standards with a protective cover and an integrated oscillating lock, which additionally prevents the twisting of logs by means of retaining teeth. Itedpfj Aanzdjx Ag Aon The height-adjustable operating handle enables ergonomic and energy-saving work (working height adjustable from 810 to 1150 mm in 10 steps). An adjustable length stop ensures that wood pieces are cut to the same length, while a support extension makes sawing long logs easier. The integrated thermal protector automatically switches off the motor in case of overload. In addition, the oscillating circular saw is equipped as standard with a zero-voltage release for increased safety in the event of a power failure. Its compact design allows for space-saving storage. Features - Effective and effortless sawing thanks to the powerful motor and the large-sized carbide-tipped saw blade. - Complies with the latest European standards: increased safety during cutting thanks to the protective cover and the integrated oscillating lock. - The oscillating arm, including the retaining teeth, prevents twisting of the log. - Ergonomic and energy-saving work thanks to the height-adjustable operating handle (working height can be adjusted in 10 steps from 810 to 1150 mm). - Convenient and easy sawing: including an adjustable length stop for wood pieces of the same length and an adjustable support extension for long logs. - The integrated thermal protector automatically switches off the motor in case of overload. - Equipped as standard with a zero-voltage release (restart protection in case of power failure). - Due to its very compact size, the firewood oscillating circular saw can also be stored in a space-saving manner.

Condition: used, Sound-dampened – Honda gasoline engine with reverse starter – 1-phase generator – Power, single-phase: 4 kVA (3.6 kW) TECHNICAL DESCRIPTION     Power, single-phase, standby: 4.9 kVA (4.4 kW)     Power, single-phase, PRP: 4 kVA (3.6 kW)     Frequency: 50 Hz     Sockets: 1x 230V 32A 2P+T CEE – 1x 230V 16A 2P+T CEE – 1x 230V 16A 2P+T Schuko     Engine shutdown in case of insufficient oil level     Circuit breaker     Fuel gauge     Residual Current Device (RCD) or insulation monitoring (optional) Ijdpe Aanvzefx Ag Aetn GENERAL DATA     Fuel tank capacity: 20 l     Running time (75% of PRP): 12.5 h     Measured sound pressure level Lwa (sound pressure LpA): 95 dB(A) (70 dB(A) @7m)     Weight (dry): 76 kg     Dimensions (LxHxW): 770 x 650 x 520 mm

Condition: used, The Nero X-35M is designed for use with tractors in categories I and II and requires an engine output of 25–35 kW (34–48 hp). Thanks to the standard PTO shaft, it can be quickly connected to the tractor and put into operation immediately. The cable guidance is flexible: the scope of delivery includes 70 m of cable with a diameter of 9 mm, including end hooks. The winch can accommodate cables up to 90 m / 9 mm diameter or 75 m / 10 mm diameter. The average cable speed of 0.9 m/s ensures efficient work while maintaining safety. The mechanical cable payout and standard manual control allow for precise operation from a safe distance. With a shield width of 122 cm, a depth of 49 cm, and a height of 210 cm, including a protective grille, the Nero X-35M is compact enough for use in confined forest areas, but still provides adequate protection for the operator. Standard equipment includes a lower cable inlet roller, a hitch, and a chainsaw holder. - High pulling force: 3.5 t, braking force 44 kN - Flexible cable capacity: up to 90 m / 9 mm diameter or 75 m / 10 mm diameter - Quick deployment: PTO shaft included, compatible with categories I & II - Efficient & safe: average cable speed 0.9 m/s - Convenient operation: mechanical cable payout, manual control standard - Robust & compact: shield width 122 cm, depth 49 cm, height 210 cm incl. protective grille - Standard equipment: lower cable inlet roller, hitch, chainsaw holder Itedpfo Aanvnex Ag Aon

Condition: used, Features • GENERAC G-FORCE OHV engine • Fuel: Natural gas or LPG operation • Electronic speed governor • Sound-dampened aluminum housing • True Power™ electronics • Two-line, multilingual Digital Evolution™ LCD controller • System status and maintenance interval LED indicators • LED indicators • Wi-Fi communication • Free Mobile Link™ Wi-Fi remote • 5-year limited warranty • Compatible with LTS switchover Performance Data Emergency Power Output (LPG) kVA 10000 Emergency Power Output (Natural Gas) kVA 10000 Frequency Hz 50 Voltage V 230 Phases 1 Power Factor cos 1 Engine Specifications Engine Manufacturer Generac Model G-FORCE 1000 SERIES Type OHV Engine Cooling System Air Number of Cylinders and Arrangement 2 Cyl. V Displacement cm³ 999 Compression Ratio 9.5:1 Starting System Electric Electrical Circuit V 12 Speed Governor Electronic Rated Speed RPM 3000 Oil Capacity l 1.8 Fuel Natural gas or LPG Natural Gas Gas consumption at 50% load m³/h 3.51 Natural Gas Gas consumption at 100% load m³/h 5.30 LPG Gas consumption at 50% load l/h 4.79 LPG Gas consumption at 100% load l/h 7.62 Iedpfxj Aanwfs Ag Aetn Dimensions Length (L) mm 1232 Width (W) mm 648 Height (H) mm 733

Condition: used, Technical data Min./Max. weight of the excavator 12-20 t Required oil flow rate 80-220 l/min Recommended pressure 200-350 bar Working width of the mulcher 1250 mm Max. diameter of the tree trunks 250 mm Belt drive 1x Poly Chain Rotor diameter 440 mm Weight 1000 kg Dimensions (L x W x H) 1510 x 680 x 1020 mm Itodpj Aanp Ujfx Ag Asn

Condition: used, The DG 270 demolition grapple from ICM is a powerful hydraulic grapple for demolition work, sorting tasks, and efficient material handling. The replaceable, bolted cutting edge made of highly wear-resistant Hardox 450 ensures long service life and reliable cutting performance. The robust slewing ring with integrated hydraulic drive impresses with its compact design, high torque, and low-maintenance operation. Scraper seals on all bolts provide effective protection against dirt, dust, and foreign particles, and increase the service life in daily use on construction sites. - Hydraulic grapple for demolition, sorting, and material handling - Replaceable, bolted cutting edge made of wear-resistant Hardox 450 Itsdpo Aanzwsfx Ag Ajn - Robust slewing ring with integrated hydraulic drive – compact, high torque, and low maintenance - All bolts fitted with scraper seals – effective protection against dirt, dust, and foreign particles

Condition: used, Gasoline-powered generator suitable for demanding occasional use and also for continuous commercial operation. Key features: Frequency Hz 50 Voltage V 230 Power factor cos 0.9 Phases 1 Engine specifications: Engine manufacturer Honda Model GX160 Engine cooling system Air Displacement cm³ 163 Intake Normal Rated speed rpm 3000 Speed governor Mechanical Fuel Gasoline Oil capacity l 0.6 Starting system Manual start Dimensions: Length (L) mm 623 Width (W) mm 409 Height (H) mm 500 Dry weight kg 43 Isdpfx Aj Aanz Dsg Ajtn Fuel tank capacity l 11

Condition: used, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC plastic Itedj Aan Hmepfx Ag Asn - Special design for wood chips, etc.: Lateral, internally positioned skirts prevent the conveyed material from getting under the belt - Crossbars of the belt, H = 60 mm - Belt length 5000 mm - Belt width 600 mm - Chassis with pneumatic tires, Ø360 mm - Electric motor located at the top of the conveyor belt for improved power transmission - Adjustable height via hand winch - Minimum conveying height with a 5 m belt length: 2.0 m - Maximum conveying height with a 5 m belt length: 3.3 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible translations at no extra cost: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min

Condition: used, YARBO 4in1 Set PRO – Snow Blower, Lawn Mower PRO, Leaf Blower & Trimmer The YARBO 4in1 Set PRO is the ideal all-in-one solution for year-round property maintenance – from snow removal and lawn care to cleaning and precise edging. It combines powerful snow removal in winter, efficient lawn care in summer, reliable cleaning of outdoor areas, and precise edging and detailing. With the snow blower, lawn mower PRO module, leaf blower, and trimmer, all key tasks around the property can be conveniently, efficiently, and automatically performed. The PRO version is specifically designed for large areas and demanding applications. Your benefits: Powerful snow removal in winter High-quality and precise lawn care with the PRO module Efficient cleaning of paths, driveways, and outdoor areas Precise edging and detailing with the trimmer Ideal for large properties and professional applications All applications combined in one system Quick and easy module changes Convenient and time-saving operation Flexibly expandable with other YARBO modules System & Functionality The YARBO system is based on the powerful YARBO Core as the central drive unit. The modular concept allows for quick and easy changes of various attachments, so that the garden robot can be flexibly used for different applications. The intelligent control enables automatic route planning and ensures uniform processing of your areas – even for large and demanding properties. Technical Highlights: Modular system with interchangeable attachments Powerful electric chain drive Intelligent navigation with RTK-GPS and sensors Automatic route planning and control via app Optimized for large areas and professional applications Technical Data System: YARBO Core + Snow Blower Module + Lawn Mower Module PRO + Leaf Blower Module + Trimmer Module Drive: Electric chain drive (battery) Navigation: RTK-GPS, stereo cameras, IMU sensors Obstacle detection: Camera, radar, and ultrasonic sensors Control: App, automatic route planning and time control Operating time: up to approx. 4 hours per charge Charging time: approx. 3 hours Area performance: up to 125,000 m² (depending on the module) Climbing ability: up to 35° Iodpfxj Aan Ahs Ag Aotn Protection class: IPX5 (weatherproof) Note: Detailed technical data for the individual modules can be found on the respective product pages.

Condition: used, Description The AMR wood packaging machine in the double-drum version offers a powerful solution for the efficient packaging of wood products. It features a manual adjustment of the lifting arm, which allows for easy retrofitting to hydraulic adjustment. The two-sided control and adjustable feet ensure optimal stability during operation. Special features such as the quick, tool-free fastening of the drum and the roll change make handling particularly convenient. With a three-point attachment and an adjustable lifting speed of the column, the machine can be flexibly adapted to various requirements. Please note that the delivery does not include drums. Matching drums are available: the 12-sided drum Ø120 cm for industrial pallets (PAL1100000) and the rectangular drum 120x80 cm for Euro pallets (PAL110001). - Double-drum version - Manual adjustment of the lifting arm (easy retrofitting to hydraulic adjustment possible) - Two-sided control - Adjustable feet for stabilizing the machine - Quick and tool-free fastening of the drum - Quick and tool-free roll change - Three-point attachment - Adjustable lifting speed of the column - Delivery without drums! - Matching drums: PAL1100000 / 12-sided drum Ø120 cm for industrial pallets or PAL110001 / Rectangular drum 120x80 cm for Euro pallets Itodpfs Aan Dfex Ag Aon

Condition: used, Diameter: 12 mm Core diameter: 10 mm Weight per meter: 96 g/m Isdpfx Ae Aaninsg Aetn MBK (Minimum Breaking Force): 120 kN Material: UHMPE / Dyneema® Construction: Core-sheath rope Ends / Delivery: includes end termination fitting Length: 100 m