Used Tsugami B0206E-Ii for sale (2,028)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection)- The machine is equipped with an IKZ and a 30-round magazine Hedpfoy T Hbzox Aitsnn Technical Specification Through-spindle Coolant Yes

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA Hnedpfxsx R Enbs Aiton weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: used, mileage: 76,695 km, power: 115 kW (156.36 HP), fuel type: diesel, overall weight: 3,180 kg, maximum load weight: 1,080 kg, first registration: 04/2010, emission class: euro4, number of seats: 3, ORIGINAL PANELED VAN RIGHT HAND DRIVE HIGH ROOF MEDIUM WHEELBASE LOADING COMPARTMENT MEASURES: LENGTH =3.5m WIDTH=1.85m HEIGHT=1.94m SINGLE WHEEL CAPACITY 1080KG GVW: 3180KG EMISSION: EURO 4 Hsdpfxov S I Als Aitjnn For information

Condition: used, mileage: 109,121 km, power: 107 kW (145.48 HP), fuel type: diesel, overall weight: 3,040 kg, maximum load weight: 1,205 kg, first registration: 12/2016, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, power assisted steering, For information Hsdpfxov T D Dzj Aitenn

Condition: used, mileage: 271,934 km, power: 240 kW (326.31 HP), first registration: 11/2012, fuel type: diesel, empty load weight: 14,550 kg, maximum load weight: 11,450 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,950 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 4, total length: 9,450 mm, Equipment: ABS, air conditioning, cruise control, differential lock, immobilizer system, soot filter, traction control, Faun Type VarioPress II 524, tipper body by Zöller, serial number 2301/70061, manufactured in 2010. Features a trailing steered axle. This is a non-binding offer; subject to changes and prior sale. Sale is made excluding any warranty. All information is provided without guarantee! Hjdjvidivepfx Aitonn

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle speed (max.): 3,200 rpm, overall weight: 6,500 kg, controller model: U-10L, TECHNICAL DETAILS Maximum turning diameter: 210 mm Maximum turning length: 500 mm Hodpoy S Sytsfx Aitonn X-axis travel: 155 mm Z-axis travel: 520 mm Spindle speed: 3,200 rpm MACHINE DETAILS Control system: U-10L Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,900 x 1,700 mm Total weight: 6,500 kg EQUIPMENT Documentation/Manual Adjustable spindle speed Parts catcher Touch probe V12 turret VDI 30 (all powered) Manual tailstock Chip conveyor Coolant pump Bar loader Samsys MUS-3000, year 2007 SMW chuck KNCS-N210-52

Condition: good (used), functionality: fully functional, Parker Parkrimp II 83 CE crimping machine for high-pressure hoses (hydraulic hoses) Crimping force: 125t (at max. 5,000 PSI) Suitable for the following fitting series: 43, 71, 77, 25, 26, 81, HY series (611HT, 801, 836) The following crimping dies are included: 5/16" Purple 80C B05 & A05 3/8" Yellow 80C A06 5/8" Orange 80C B10 & A10 Hsdpfx Aiev Rnnlotonn 1/4" Red 80C B04 & A04 3/4" Green 80C A12 & B12 & C12 & 12 (78) 1/2" Blue 80C A08 & B08 1" Black 80C A16 & B16 & C16 & 16 (78) 1 1/4" White 80C A20 (2 pcs) & C20 2" Red C24 Weight: 450 kg #8247

Condition: used, KISTLER Control Monitor CoMo II-S 5859A1 Condition: Used functional Hsdpoy S Dtxjfx Aitjnn

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Table size: 1800 mm Minimum diameter: 200 mm Hnodpfxeylprfs Aitsn Maximum number of teeth: 45 Max. module: 20 Weight: 40 tons

Condition: excellent (used), functionality: fully functional, Despite its age, the machine is in like-new condition!!! For sale is a powerful wire erosion machine, model 600 ERCOCOM II, from Dieter Hansen, equipped with a Heidenhain control system. The machine is equipped with high-quality components and is particularly suitable for precise applications in tool and mold making. Features & Highlights: • Adaptimat with gap process monitoring – specifically for graphite machining to avoid arcing (New price alone approx. €13,000) • 16-position electrode changer for automated series machining Hsdpfxeykq U Es Aitonn • Erowa clamping system for precise and fast setup • 3D probe with carbide ball for accurate measurement • Cooling system (7 kW) • Integrated extraction system for fumes Some barrels with dielectric fluid are included! An inspection and functional test are possible by appointment. If you are interested, we look forward to hearing from you. The price includes packaging on the original heavy-duty pallet and loading onto your truck using a forklift.

Condition: good (used), Year of construction: 1985, functionality: fully functional, grinding length: 600 mm, grinding diameter: 250 mm, External cylindrical grinding machine WAGNER/YAM GU2760 Year of manufacture: 1985 Control: mechanical/hydraulic The machine is fully functional and can be inspected while powered on. Further details will follow. Hjdpfxsy Tcnko Aitsnn

Condition: used, machine/vehicle number: 008269, Position 1: Panel Feeding and Loading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 2: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 3: Double Sided Squaring/Edgebanding Machines IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 4: Panel Turning Device IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Position 5: Panel Stacking and Offloading IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Hnsdpox A Hggsfx Aiten

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 25,500 h, Machine in very good condtion. Fully functional. Ready for use Hnedpfxezam D Ij Aitsn

Condition: good (used), Year of construction: 2001, Lifting capacity: 220 kg Width: 560 mm Height: 1400 mm Depth: 450 mm Net weight: 45 kg Hjdpfx Ajy Tiwlsitjnn Condition: good, second-hand

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes Hsdpfx Aox Db D Aeitenn - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.

Condition: used, Year of construction: 1990, x-travel 2800 mm y-travel 1000 mm z-travel 1200 mm table surface area 2000 x 800 mm rotary table dia. 800 mm spindle taper SK 50 spindle turning speed - stepless 50 - 2000 U/min Hedpfx Aoyt Rwloitenn max. torque on the spindle 3000 Nm spindle drive 30 kW feeds longditudinal/cross/vertical 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical 7 m/min control SIEMENS control SINUMERIK 850 M no. of tools in magazin 56 workpiece diameter at full load 114 mm wotkpiece diameter with 2 vacant positions 200 mm workpiece length 400 mm weight of tools max. 16 kg tool changing time ca. 8 - 9 sec internal coolant system feed ja / yes weight of the machine ca. 25,4 t = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration device, electron. handwheel, fixators

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Technical Information for Mazak Corporation Mazak VTC-300C II: Model: Mazak VTC-300C II Machine type: Vertical CNC Machining Center Year of manufacture: 2003 Serial number: 162107 Hnedpey St E Rofx Aitsn Accessories: Chip conveyor included Connected load: 28 kW Typical technical data for the Mazak VTC-300C II: Control: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Travel distances: X-axis: approx. 1,740 mm, Y-axis: approx. 760 mm, Z-axis: approx. 660 mm Table size: approx. 2,000 × 760 mm Table load capacity: up to approx. 1,400–1,500 kg Spindle taper: CAT 40 / BT40 Spindle speed: typically 10,000 rpm Main spindle power: approx. 18.5–22 kW Tool changer: 30 positions Rapid traverse: approx. 36 m/min Coolant system: included Machine weight: approx. 11,000–13,000 kg The machine is part of Mazak’s large VTC series and is particularly suited for: Large aluminum parts Steel machining Automotive production Fixture and series manufacturing

Year of construction: 2004, condition: excellent (used), machine/vehicle number: BN320Ausschub, DEMAG KBK - Single girder extending crane - Crane runway with dimensions approx. 8m + 1.5m (8m monorail + 1 central 5.5m rail) with approx. 1.5m extension. Payload / lifting capacity 320KG Technical data of the system: Crane runway made of Demag KBK2 rails The installation is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/supports, extension frame type B2/2 etc. incl. 320KG Demag DK chain hoist - lifting height approx. 3m Power supply on the long side by means of internal conductor rails (KBKII-R) Crane is disassembled and immediately available Hnsdou I U Anjpfx Aitjn Running rails can be extended to length x Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, machine/vehicle number: 005637, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Hodpfxsvw Ev He Aitonn Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1300 mm Max feed speed: 50 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 12 nr

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-6 Hnsdpfeuhafxex Aiten - Spindle power : 18,5 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 250 [mm] - Max. chuck diameter : 215 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 59 - 4500 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 165 [mm] - C axis indexing precision : 0,001 [°] - Travel : 575 [mm] - Spindle / counter-spindle distance : 250 - 870 [mm] TURRET 1 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] TURRET 2 - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 195/600 [mm] - Live tools speed : 80 - 3600 [rpm] - Live tools power : 5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 63 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3475 x 1933 [mm] - Machine height : 2225 [mm] - Machine weight : 7800 [kg] MACHINE HOURS - Number of hours under power : 58774 [h] - Number of spindle hours : 19265 [h] EQUIPMENT - CNC : 18i-TB - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] - Chips conveyor - Parts catcher - Parts conveying strip - Number of turning tool holders : 11 - Number of fixed tool holders : 11 - Collet chuck

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Hjdpfx Aijy Tav Eetenn

Condition: used, mileage: 372,769 km, power: 88 kW (119.65 HP), first registration: 01/2010, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro3, total length: 5,399 mm, total width: 1,990 mm, total height: 2,450 mm, Year of construction: 2009, Equipment: ABS, central locking, Special equipment: Rear wing doors with glazing, mud flaps front and rear Additional equipment: Driver's side airbag, tachometer, body/superstructure: standard high box van, fuel tank: 100 L, load compartment partition, engine 2.5 L – 88 kW dCi Diesel KAT, wheelbase 3578 mm, sliding door right to load/passenger compartment, double passenger seat in cab Clutch new!! Hnodpfjy Tq Nvsx Aitsn

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Hnjdpfx Aisqzhfxjtjn Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: reconditioned (used), Year of construction: 2012, functionality: fully functional, MAZAK QUICK TURN NEXUS 250-II MY Max. turning diameter: 380 mm Max. machining length: 504 mm Max. milling speed: 4,500 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - CNC control Mazatrol Matrix Nexus 2 - KITAGAWA three-jaw chuck B-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher - NC tailstock - reinforced coolant pump - MAYFRAN chip conveyor Hnsdpfx Aeyy Ad Eoiten - 8 fixed tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2008, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, CNC control Mazatrol Matrix 2-fold pallet changing device NC-swivel rotary table 80-fold tool changer high pressure coolant through the spindle 20bar chip conveyor Hjdpfxetp Hgzj Aitjnn Technische Daten / technical details: Verfahrweg X / X-Travel 630 mm Verfahrweg Y / Y-Travel 765 mm Verfahrweg Z / Z-Travel 510 mm Schwenkbereich A-Achse / swivel range A-axis -120 - +30 ° Drehbereich C-Achse / rotary range C-axis 360 ° Tischgröße / table size 500x500 mm Werkzeugschaft / spindle taper SK40 Drehzahl / spindle speed 35-12000 UpM /rpm Eilgang / rapid feed 50 m/min Anzahl der Werkzeugplätze / tool places in ATC 80 fach / fold Antriebsleistung Hauptantrieb / drive capacity main drive 26 kW Gewicht der Maschine ca. / weight 17000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.