Used Ulmatec Extraction for sale (4,513)

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Nledpfx Aeu R Szyegrog - new exhibition machine -

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Nljdpfxju R S A Ro Agreg Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm Nlsdpet Rbhzjfx Agrjg -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: good (used), Nedermann extraction unit Nodpfx Agjq H Auierolg Power: 230V Power: 900 W

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h Nsdpfen Srvyex Agrolg -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Nlodpfent Uc Rjx Agrjg Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: good (used), Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, radial fan, medium-pressure fan -Manufacturer: Karl Klein, medium-pressure fan type DMV 350 -Motor: away 1.1 kW/ 2765 rpm Nedpfxjp A A Sas Agrjlg Voltage: 380 volts -Volume flow: 1260 m³/h -Pressure: 2380 Pa -Connection input: Ø 150 mm -Connection output: 60 x 100 mm -Quantity: 1x piece available -Transport dimensions: 500/485H340 mm -Weight: 30 kg/piece

Year of construction: 2000, condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 Nljdpolzmylofx Agrsg -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Year of construction: 2001, condition: like new (used), Filter area: 22 m²# Nominal volume flow: 4700 m³/h Minimum flow rate: 3530 m³/h External pressure suction port at V min.: 2450 Pa Sound pressure level max.: 69 dB Suction nozzle Ø: 250 mm Suction engine speed: 3000 rpm Motor: 400V 5.5KW Required space: 2520 x 900 x 1963 mm Nlodjk Tahzjpfx Agreg Weight: 730 kg

Year of construction: 2020, condition: like new (used), !!! We have three units is stock. Price is for one unit only !!! Taiwan Advanced Nanotech TANBead Nucleic Acid Extractor Maelstrom 9600 Excellent working used condition. Includes all pictured components only. Maelstrom 9600 is an automated nucleic acid platform designed for high-throughput applications. Specialized spin tips enable efficient mixing of magnetic beads with a larger processing volume. With an intuitive user interface and flexible programming, Maelstrom 9600 can boost laboratory productivity by transforming routine operations into a walk-away solution. - High-throughput: 96 samples/run - Efficient whirl stir mixing approach - Speed and precision: 4 independent temperature control modules - Flexibility in samples/run: 6, 12, 18, 24, 32 up to 48 (with single tube) Model: Maelstrom 9600 Volume: 87 x 70 x 57.5 cm Power supply: 220-240 Vac Processing volume: 50ul - 1600ul Spin speed: up to 3000 rpm Magnetic rod: 3000 gauss Display: Touchscreen Nljdekzlqfspfx Agrsg Good working condition. Please check out our other listings as well.

Condition: used, Mobile Dust Extraction Fritz Moeller Nljdpfsddxl Eex Agrsg

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters Nledpfxjbpg Nco Agreg • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW Nlsdjb A E Uhepfx Agreg -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: HSL 1500-8-12/8 GB, type of input current: AC, volume flow: 2,500 m³/h, filter area: 33 m², Dust filter herding with modular fan Nljdpfx Asvz Az Ijgreg Technical data: Power consumption 1x15 kW option 2nd 15kw Filter is supplied with 1 side channel fan 2nd side channel fan is optional. Filter surface 33 m² Dust container capacity 40 litres Weight 660 kg Suction connection 2x 160mm Operating volume flow: 2500 m³/h Operating mode: Continuous operation Cleaning: compressed air Compressed air connection must be available side channel fan: brand: Effepizeta Type: SCL K10-TS Power: 15kw Speed: 2908 rpm

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile 2x chip bins á 190l Volume flow 2500 m³/h Nedpfx Agjvz Uhysrslg HxWxD: 2160 x 830 x 1900 mm

Condition: new, Year of construction: 2026, Manufacturing of various types of dust collectors and dust removal systems, 2.2-22 kW. Nedpfxezl N Ewj Agrjlg

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition Nedpezxtz Nefx Agrelg - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: used, 4-bag dust extractor SIA 8/26 Nlodpfx Aszkh Etjgreg

Condition: good (used), LINCOLN high-pressure, self-cleaning extraction unit for laser cutting, welding, dust, and particulate matter removal. Cartridge-type filter element cleaned during operation by pulses of compressed air, ensuring high device efficiency. High-pressure turbine motor with a power of 5.5 kW and a vacuum of up to 17,650 PA!! Nledpfx Aeg Th S Aegrsg Flow rate: 500 m³/h.

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Nlsdpfxey T Iyre Agreg Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: new, Year of construction: 2026, CORMAK OS1400 Mobile Welding Fume Extractor The CORMAK OS1400 is a mobile welding fume extractor designed to effectively remove welding fumes and exhaust gases directly at the source. It combines high suction pressure with a high airflow rate, while its sound-insulated fan chamber ensures quiet and comfortable operation. Additional advantages include an integrated pneumatic filter cleaning system, adjustable airflow at the suction inlet, and a robust industrial-grade construction. A Healthier and Safer Working Environment Welding fumes are more than just unpleasant odors and reduced visibility. They consist of extremely fine particles and hazardous compounds that can quickly deteriorate working conditions in enclosed workshops and production halls. The OS1400 is designed to capture welding fumes and exhaust gases at their source before they spread throughout the workstation and the entire facility. This provides operators with a cleaner working environment while helping companies maintain workplace safety standards and keep production areas clean and organized. High Performance for Demanding Applications One of the key advantages of the OS1400 is the combination of high suction pressure and high airflow (1,500 m³/h). In practice, this ensures reliable and efficient extraction even during intensive welding operations with heavy fume generation, such as: continuous welding, welding thick materials, long weld passes. Its high extraction capacity helps prevent fumes from escaping into the surrounding work area, improves visibility, and enhances both welding quality and operator comfort. Nsdpfx Agoznt Ihorjlg Quiet Operation for Greater Workplace Comfort Daily usability is further enhanced by the unit's low-noise operation. The OS1400 features a sound-insulated fan chamber that significantly reduces operating noise, allowing the extractor to be positioned close to the welding station. This is especially beneficial in workshops and manufacturing facilities where several welding stations operate simultaneously. Reduced noise levels improve communication between operators, enhance concentration, and contribute to a more comfortable working environment throughout the shift. Automatic Pneumatic Filter Cleaning The CORMAK OS1400 is designed for ease of use and consistently high performance. It is equipped with an automatic pneumatic filter cleaning system that periodically removes accumulated dust from the filter without frequent manual intervention. This provides two major benefits: consistent extraction performance over extended operating periods, reduced maintenance downtime and lower operating costs. In production environments, minimizing unexpected interruptions and maintaining constant extraction efficiency helps improve productivity while ensuring clean working conditions. Adjustable Extraction Performance The unit features adjustable airflow control at the suction inlet, allowing extraction power to be matched to the specific application. Robust Construction and Mobility The OS1400 is designed for everyday industrial use. Its heavy-duty construction withstands demanding workshop and manufacturing environments where equipment is frequently moved, operates for extended periods, and is exposed to intensive daily use. Technical Specifications Model CORMAK OS1400 Airflow 1,500 m³/h Maximum Pressure 2,000 Pa Filter Efficiency 99.9% Motor Power 1.5 kW Power Supply 400 V Weight 80 kg

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Nsdpfswiuaqex Agrslg Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 875 kg, volume flow: 2,750 m³/h, Donaldson dry extraction unit for sale Capacity: Q 2.750 m³/h 5,5 KW further technical data see pictures Condition very good. Can be viewed at any time Nsdpfx Asulgl Ijgrslg

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! Nlsdpeuud Irofx Agrjg The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Nsdpfxsunh Uvo Agrolg Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m