Used Unbekannt Mit Feineinstellung for sale (10,092)

Condition: used, Technical details: band width: 135 mm conveying height: 1020 control voltage: 380 V weight of the machine approx.: 165 kg dimension machine xH: 3,3 x 0,5 x 1,5 m Scraper belt conveyor made of sheet steel construction Further technical details: -profile height (B1) 160mm -Profile width (F) 300mm -Chip inlet width (F1) 160mm -Chip length (A) 1700mm -Bottom clearance (I) 20mm -Discharge length (D) 200mm -Discharge height above floor (C) 1020mm -Discharge width 200mm -Insertion length/underfeed length (A) approx. 2000mm -Insertion height (B) 180mm Operation via manual switch Rotating scraper brushes at the discharge and on the left/right side of the infeed beam Fodpfju Nuquox Aageph *

Condition: used, 86 sets available (2 pcs. per set)different sizesmore information under "Download" Fpededc A Sajpfx Aageh

Condition: used, Technical details: floor-plate length: 2600 mm plate width: 380 mm plate height: 115 mm Plate thickness: 115 mm weight of the machine ca.: ca. 0,4 / pro Platte t transport dimensions LxWxH: ca. 2,6 x 0,38 x 0,2 / pro Platte m There are 3 panels for sale together. (Price per panel) These can be connected to form a panel field. Material steel, milled surface Longitudinal groove Quantity 2 a=36mm,h=48mm,b=60mm,c=24mm Fjdpfx Aaoval Emsgeph Center distance 160mm Base fastening Quantity 4 Size D=32mm x 45mm Countersink D070x65mm Bore front side Quantity 1/front side M20 Position centered *

Condition: used, Technical details: floor-plate length: 4900 mm plate width: 1460 mm plate height: 300 mm Plate thickness: 300 mm weight of the machine ca.: 5,3 / pro Platte t transport dimensions LxWxH: ca. 4,9 x 1,5 x 0,3 / pro Platte m There are two plate fields for sale. Material cast steel T-slots according to DIN 650: a=58; h=108; b=110; c=50 mm Center stand 295 mm 6x through holes Ø 40 mm 2 groove areas are broken out on the face of one panel. Fodpsval Hqjfx Aagjph *

Condition: used, Technical details: table load: 3 t Fpodpfsxz E Exsx Aagjh table diameter: 1280 mm table rotating: 0-180 Grad table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. *

Condition: used, approx. 74tdifferent strengthsmore information under "download" Fpodpfx Aaedc A R Uegoh

Condition: used, Technical details: weight: Preis wird nach kg berechnet kg Various crane runways Pos. 1: Columns for crane runway 6x double T-beams L: 4.66 metres x W: 22 cm x H: 54.5 cm 1x double T-beam L: 4,71 meter x W: 21,5 cm x H: 55 cm Pos. 2: Crane runway 4x T-beams L: 7.16 metres x W: 22 cm x H: 54.5 cm 2x T-beams L: 6.25 metres x W: 22 cm x H: 54.5 cm 2x T-beam end pieces with stopper L: 6.93 metres x W: 22 cm x H: 54.5 cm Pos. 3: Crane runway 4x T-beams L: 5.90 metres x W: 21.5 cm x H: 55 cm Fpodpfxou Nvkvo Aagjh 2x T-beams L: 4.10 metres x W: 21.5 cm x H: 55 cm 2x end pieces with stopper L: 6.05 metres x W: 21.5 cm x H: 55 cm Pos 5: 10 pieces support beam length 6.400mm with TT profile 180 x 180mm weight 2420 kg Subject to prior sale. If still available. Please ask exactly for which beams you are interested. Subject to prior sale. If still available. Please enquire exactly which girders you are interested in. *

Condition: used, Technical details: floor-plate length: 2990 mm plate width: 1990 mm plate height: 190 mm Plate thickness: 190 mm weight of the machine ca.: ca. 7,0 / pro Platte t transport dimensions LxWxH: ca. 3,0 x 2,0 x 0,2 / pro Platte m Fodpfx Aoval H Rjagoph There are 2 plates for sale. Material cast steel Surface milled/finished T-slots according to DIN 650: 8xT-slots large: a=36; h=70; b=55; c=25.5 mm 7xT-slots small: a=28; h=38; b=47; c=21 mm Center stand 123 mm 9x through holes Ø 80 mm 6x through holes Ø 33 mm *

Condition: used, approx. 15t available Fodedc A Sijpfx Aagsph

Condition: used, Technical details: floor-plate length: 4500 mm plate width: 1250 mm plate height: 250 mm Plate thickness: 250 mm weight of the machine ca.: 3,6 / pro Platte t transport dimensions LxWxH: ca. 4,5 x 1,3 x 0,3 / pro Platte m There are 2 plates for sale. Material: Cast steel T-slots according to DIN 650 Fodpfjval Hdex Aagsph a=21; h=40; b=39.5; c=16mm; center distance T-slot to T-slot = 250mm *

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm plate height: 180 mm transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Fixing hole: Number 4 Size D=30mm Fpodpfx Aownfu Nsagsh *

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Fan: Blower, radial fan -Type: 2-stage -Motor: ASEA 0.4/0.1 kW 1390/690 rpm -Fan wheel: 2x Ø 200 x 80 mm Fpjdpfx Aaey Tt Ihegeh -Inlet connection: Ø 160 mm -Output connection: 190 x 180 mm -Dimensions: 815/590/H400 mm -Weight: 33 kg

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Fsdjyxr T Tjpfx Aagjph Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Coolant pump: Coolant pump -Engine: Cantoni 3.0 kW -Immersion depth: 450 mm -Overall dimensions: 500/340/H880 mm Fedpfx Aaov Iyl Rsgoph -Weight: 74 kg

Condition: excellent (used), Tool holder, milling holder, milling tool, milling mandrel Fpjdpfx Aaey Tlc Regoh -Milling tool holder: SK40 tool holders -Cutter holder: Ø 6 mm -Number: 35 milling tool holders available Price: per piece -Dimensions: Ø 64 / 120 mm -Weight: 0.9 kg

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 630 x 6.4 mm -Inner diameter: 80 mm -Bolt circle: Ø 120 x 22 mm -Number of teeth: see photo -Quantity: 2x saw blades included Price: per piece -Weight: 10.6 kg Fpedpfxow Au Ego Aagsh

Condition: good (used), Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design, with large vise -Clamping surface: 1200 x 1100 mm -Table height: 850 mm -Sheet thickness: 105 mm -Vise: Jaws 150 x 30 mm, clamping range 245 mm -Overall dimensions: 1300/1200/H1060 mm Fsdpjy Tit Hefx Aagjph -Weight: 1100 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Fpodpfx Asy Tin Roageh -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/67/H55 mm -Total weight: 1.9 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard Fedpfx Aaoy Tin Djgjph -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H65 mm -Total weight: 2.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Fpodpfx Aaoy Tinkogjh -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H66 mm -Total weight: 2.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Fsdpfx Aey Thyfjageph -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 26 mm -Dimensions: see photo technical drawing -Overall dimensions: 110/80/H66 mm -Total weight: 2.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Fedpfjy Thwwsx Aagoph -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/65/H55 mm -Total weight: 1.6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm Fpjdpjy Thwqofx Aagsh -Dimensions: see photo technical drawing -Overall dimensions: 70/65/H57 mm -Total weight: 1.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Fodoy Thwkepfx Aagoph -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/65/H57 mm -Total weight: 1.4 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Fpjdpfjy Thn Asx Aagjh -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/65/H55 mm -Total weight: 1.3 kg