Used Unicraft Sandblasters for sale (344)

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Hedpfx Aboyizxrj Nsnl Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1999, suction capacity: 5,600 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning filter, pneumatic, vacuum dust extractor, plasma, laser, sandblasting and all types of dry dust. Filter cleaned pneumatically with compressed air pulses during operation, which results in high efficiency of the device. Sinbran filter cartridges. SINBRAN filter cartridges are environmentally friendly and therefore suitable for use in the pharmaceutical and food industries. They are suitable for separating aerosols of organic materials, such as those created during laser cutting operations. SINBRAN filter cartridges combine the advantages of membrane filters with the advantages of rigid body filters: Large filter surface requiring minimal space. High mechanical load capacity, Hodpjvxtkzjfx Ab Nsnl very long life cycle, low pressure drop and high filtration efficiency is a new approach to dust removal that achieves impressive filtration results, even in particularly difficult applications. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters it causes minimal pressure loss. Short compressed air pulses during the filtration process ensure effective filter cleaning. 7.5 Kw fan Efficiency 5600 m3/h Sinbran filter inserts 12 pcs. Negative pressure 3000 Pa

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Hnedpfoy Sk T Eex Ab Nel Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: like new (used), Year of construction: 2017, operating hours: 1 h, functionality: fully functional, We offer refurbished turbines from a hanger-type shot blasting machine - Cogeim PG 10x15/2TR, year 2011. Shot blasting machine, sandblaster, blasting turbine, sand blasting, shot blasting. Hnsdpfey Nwq Ssx Ab Nsl

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: Hnodpfxey Hm E He Ab Njl • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. Hedpfxjy Hm Eto Ab Nenl • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. Hnodpfx Ajy Hm Eyjb Njl • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: used, functionality: fully functional, Year of construction: 1997, load capacity: 13,500 kg, Industrial trailer Condition: Ready for operation and fully functional Technical condition: Good Description: 2-axle 3-way tipper SCHWARZMÜLLER with aluminium side walls --- Payload 13.5 tons --- Unladen weight 4.5 tons --- Year of manufacture: 1997 --- Drop and foldable walls --- Rear wall opens automatically --- 1st wall aluminium 80 cm, original Schwarzmüller --- Extension walls aluminium 60 cm --- Chassis and underside of platform have been newly sandblasted, primed, and painted --- Dual-circuit air brake system --- Lighting system --- Platform internal dimensions: width 2.42 m, length 5 m --- Tyres approx. 80% --- Austrian documents for registration included Hodpfx Asy Nu U Ieb Njnl

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 Hedpfey E A Sajx Ab Nenl • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. Hedjy Ei R Aopfx Ab Nenl • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Type: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel coupling with sliding mechanism and self-lubricating (Jost JSK type), mounted on support frame • Reversing camera fully installed Bodywork: • Execution of all chassis modifications required for crane installation, including removal and installation of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork modifications are carried out in strict compliance with the bodybuilder guidelines of the respective chassis manufacturer and executed in premium quality. • Complete assembly of a proprietary designed and in-house manufactured special subframe made of fine-grained steel for crane and superstructure. The fully welded and bolted subframe to the chassis frame guarantees exceptional torsional rigidity and outstanding stability for the crane vehicle. A unique feature is the subframe construction, executed to the highest quality and coated in chassis color. • Installation/bolting of the crane and main outrigger support on the subframe. Installation of all hydraulic and electrical connections. Installation position: Front • Removable drop-side platform in steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Platform body painted in RAL (chassis colour) • Removable aluminium side boards by Suer, height 600 mm, anodised finish with step treads, removable Kinngripp stakes • Standard platform floor with welded 4 mm steel checker plate painted in RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, set in perforated rails for flexible arrangement • 4 chain lashing points 6500 daN (2 front, 2 rear on body) • Robust front wall made from welded frame, welded 4 mm sheet steel and 5 accessory hooks, wall height approx. 1300 mm, painted steel version, with 2 folding lashing eyes welded on for securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted); please specify RAL color • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted); specify RAL color; size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stake pockets, 2 rows (as agreed), approx. 80 cm from front and rear walls • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizing support mounted under chassis • Installation of underride protection at rear and additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections at front for semi-trailers and also at rear for trailers Hnodpoy Ei R Nsfx Ab Njl New crane, FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 beacons on the FH roof • 2 strobe lights in engine hood • 2 LED lights under bodywork at rear, left and right, position per agreement • 4 LED working lights, 2 each left and right

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: Hedpfx Abjy Ei Rvo Nsnl • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Hedpfsydggqjx Ab Nonl Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Hnedpfx Absnyhvqe Nel Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Year of construction: 1995, condition: used, Dust extractor,welding fume extractor by Herding. Hnedpepwhl Usfx Ab Nol Self-cleaning,pneumatic filter for plasma,laser,sandblasting,sodding,grinding plaster,cement,plastic and all kinds of dry dust. The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the material of the body (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1680 m3/h

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. Hodpfeu A Thlsx Ab Nonl The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. Hodpfxewtb Rqs Ab Njnl • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 957 h, type of input current: three-phase, overall weight: 600 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 30 W, feed length X-axis: 200 mm, feed length Y-axis: 250 mm, feed length Z-axis: 330 mm, travel speed (max.): 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. Peripheral Equipment & Accessories For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine Details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: complete, all original EOS components _____ Technical Specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, depending on material) • Materials: PA12, PA11, TPU, and other SLS-compatible plastics • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / material management system • Machine weight: approx. 600 kg Hedpfx Aboy El Ane Nenl _____ Scope of delivery (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for cost-efficient operation) • Leering sandblasting cabin type DI-12 (for professional post-processing of components) • Ruwac industrial vacuum cleaner, type WS 200H, Zone 22 ATEX-certified (for safe handling of plastic powders) • 4x material containers • 2x build containers _____ Special Highlights: • Very low operating hours (only 957 h) → like new condition • Complete, immediately ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications • All accessories are original EOS parts → perfectly matched system _____ Application Areas: • Prototyping • Small batch production • Spare parts & customized components If you have any questions or require further information, please feel free to send us a message or give us a call. A viewing is also possible by appointment.

Condition: excellent (used), Year of construction: 2019, operating hours: 9,058 h, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, filter area: 106 m², suction capacity: 7,000 m³/h, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 6 Year of manufacture: 2019 The unit has 9,000 operating hours. Filtration area: 106 m² Fan power: 7.5 kW Capacity: 7,000 m³/h Inlet diameter: 315 mm Dimensions: Hnjdsydcygepfx Ab Nel Height: 3.38 m Width: 2.10 m x 1.15 m Stock number: 1105

Condition: good (used), Manufacturer: Haver & Boecker Type: Niagara MD 1000 x 2500 G Deck size: 1.000 x 2.500 mm Number of decks: 2 Included: – Frame – Springs Hodsy A S T Iepfx Ab Nenl – 4KW Electrical Motor Vibrating screen can be sandblasted and painted.

Year of construction: 2012, condition: good (used), Manufacturer: Hein Lehmann Liwell Type: LF 1.5 – 5.67 / 18 ED Deck size: 1.500 x 5.670 mm Number of decks: 1 Hsdpey A N Tfsfx Ab Nenl Included: – Frame – Top Cover – Electrical Motor – New V-belt pulley’s – New Rubber springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: good (used), Manufacturer: Hein Lehmann Liwell Hnodpfsy A N Atox Ab Nel Type: LF 2,0 – 5,04 / 24 ED Deck size: 2.000 x 5.040 mm Number of decks: 1 Included: – Frame – Electrical Motor Vibrating screen can be sandblasted and painted.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 70000121, number of ink cartridges: 6, color channels: 6, number of print heads: 8, resolution (max.): 360 dpi, paper width (min.): 400 mm, paper width (max.): 2,800 mm, paper height (min.): 400 mm, paper height (max.): 3,700 mm, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, raster image processor, DIP-TECH GlassJet PRO 16PH – Industrial Digital Glass Printer A professional solution for digital ceramic ink printing, designed for medium to large-scale glass processing facilities. Digital Ceramic In-Glass Printing: Technology that makes the print as permanent and durable as the glass itself. Design Flexibility: Capable of printing photorealistic images, vectors, textures, and imitations (e.g., sandblasted glass effect). Robust Construction: The roller conveyor system (flatbed gantry) ensures maximum precision even with heavy glass loads. General Specifications: Manufacturer: Dip-Tech Model/Type: GlassJet PRO 16PH Serial Number: 70000121 Hnsdpsy Ia E Ajfx Ab Nel Year of Manufacture: 2009 Number of Print Heads: 8 installed (expandable up to 16) Ink Type: Digital ceramic ink (requires tempering/firing after printing) Control Language: English Maximum Glass Size: 2800 x 3700 mm Minimum Glass Size: 400 x 400 mm Glass Thickness: 2–19 mm Performance & System: Print Resolution: Up to 360 dpi Number of Color Channels: 6 channels (BGWORK: Blue, Green, White, Orange, Red, Black) Control Software: GlassJet Operating System / Durasst RIP Print Head Type: Spectra Nova Transport System: Automatic roller conveyor Condition: The machine is in very good visual and technical condition, regularly maintained through its control system. It is sold with all accompanying documentation and technical drawings. A set of spare parts is also available upon request. For more information, please call: +387 63 335 445

Condition: used, first registration: 03/2012, color: grey-black, Year of construction: 2012, gearing type: other, LICENSE PLATE: AH12361 Hnsdpfswq Ey Rox Ab Nsl TITLE: ATLAS DROP-DECK TRAILER, SANDBLASTED AND REPAINTED, AIR SUSPENSION REF: 25R02 YEAR: 03/2012 AXLES: 2 WHEELBASE: 4800 mm OVERALL LENGTH: 9.16 m DOMESTIC / EXPORT: Italy PAYLOAD: 16,400 kg - TRAILER: 20,000 kg fully loaded BODY TYPE: demountable (hooklift) BODY BRAND: ATLAS ADR: yes BODYWORK ADAPTABILITY: FROM: 5.00 m + 0.20 m TO: 7.00 m + 0.20 m SUSPENSION: air BRAKES: disc TYRES: 265/70 R19.5 ACCESSORIES - 4 new brake discs - new brake pads - caliper locking with tractor’s supply oil lines - 4 inner calipers (2 per side, operate independently) REFURBISHED: yes INSPECTION VALID UNTIL: 27/01/2026 TYRE CONDITION: 30% front, 40% rear PRICE: €17,500.00 + VAT Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales team for up-to-date pricing and conditions. For more information: Loris: 3484773001 URL: #thespecialistsofhooklift AURORA HOOKLIFT SYSTEMS operates in the sale and purchase of industrial and commercial vehicles, mainly specializing in the waste management sector. Experts in trucks, trailers, and hooklift equipment. A ready-to-deliver fleet of over 50 trucks and more than 150 containers, with and without hooklift cranes. E.&O.E. Given the number of adverts and details listed, Aurora invites you to verify the accuracy of the posted data with our sales staff.

Condition: refurbished (used), For sale is a servo-hydraulic mold carrier, completely overhauled by Optitek. Hedsy Ax Ifepfx Ab Nonl Technical data: Current state-of-the-art: after full overhaul in 2026 Closing force: 600 kN Stripping force: 300 kN Hydraulic operating pressure: max. 250 bar Clamping area: 2,000 x 1,000 mm Parallel stroke: 750 mm Opening width: 1,350 mm Upper platen tilt: 45° Lower platen tilt: 30° Total permissible tool weight: max. 100 kN Max. upper tool weight: 50 kN Travel speed: 160 mm/s Machine dimensions (L x W x H): 3,000 x 1,600 x 3,400 mm Machine weight: 8 tons Electrical connected load: 45 kW Operator side: one-sided Tank volume: 800 liters The following services have already been performed as part of the mechanical overhaul: · Disassembly of the mold carrier · Sandblasting of the mold carrier · Inspection of weld seams and restoration to proper condition if necessary · Cleaning, priming, and painting of individual mold carrier components: - Frame: RAL7035 (light grey) - Press ram: RAL3000 (flame red) · Replacement of all bearings and bushings · Refurbishment and resealing of drive cylinders · Assembly of the mold carrier