Used Urschel Dicing Machine for sale (66,708)

Condition: used, Mobile aqueduct    • Maximum clearance height: 4300 mm    • Maximum clearance width: 7500 mm    • Discharge pipe: 6''    • Equipped with support legs    • Own registration number Condition: Used Hedpfxsz S Durs Akrenu

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: SN 10342, GROB G552 – G550 AB Generation 2 (SN 10342) HORIZONTAL 5 AXIS MACHINE - NEW IN OUR SHOWROOM (177 HOURS SPINDLE - ONLY DEMOS WITHOUT ANY MACHINING OR CHIPS MAKING) X-axis travel: 800 mm Hnodjz Sdugjpfx Akrju Y-axis travel: 1020 mm Z-axis travel: 970 mm A-axis travel: -185º/+45º (torque motor) B-axis travel: n x 360º (torque motor) Table diameter ( T-slots): 770 mm Max workpiece diameter: 900 mm Max workpiece weight.: 800 Kg RAPID traverses X/Y/Z: 65/50/80 m/min AXIS acceleration X/Y/Z: 6/4,5/7,5 m/s2 Total positioning repeatibility < 0,0025 mm MOTORIZED spindle GROB, HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW,oil-air lubrication GROB spindle diagnostics GSD Flushing unit Z-axis Machine cooling system through an air cooled chiller unit (13 Kw) Horizontal disc-type tool magazine HSK-A 63 with 70 tool pockets Max. tool length (automatic change): 465 mm Max. tool length (manual change): 700 mm Work platform at tool magazine Tool cleaning device by compressed air Machine control Heidenhain TNC 640 with GROB4Pilot control panel Electronic handwheel HR 520 (Heidenhain) Grob Kinematic measuring inspection equipment Collision monitoring DCM Collision (HEIDENHAIN) Swivel axis calibration GSC advanced Laser measurement system BLUM LaserControl LC-50 DIGILOG for milling tools Radio touch probe RMP400 with remote RMI-Q Scraper type chips conveyor Cutting fluid filtration system Cutting fluid tank 1.250 L Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose CTS High-pressure cutting fluid unit (10-80 bar, ICS) Flushing unit for the base of the work area Flush and air guns at the work area Oil skimmer for cutting fluid care Machine status lamp (4) in the machine enclosure Total weight 25,7 ton CE Mark

Condition: good (used), Year of construction: 1985, bore capacity in steel (diameter) 35.0 / 40.0 mm Hnedpfx Ajz S N Drekreu throat 315 mm bore stroke 180 mm turning speeds 130 - 3500 U/min table-size 615 x 470 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 mm/U spindle taper MT 4 MK engine output 2.0 / 2.4 kW weight 450 kg range L-W-H 800 x 650 x 2100 mm Features: - Heavy-duty column drill press - With extended column (200 mm) - Drive: "VARIO" V-belt * Continuously variable speed control - automatic spindle feed (0.1/0.2/0.3 mm/rev) * with electromagnetic engagement - pole-changing motor - clockwise rotation of the drill spindle - adjustable fixed drill depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Machined base plate - Coolant system in the machine base - Machine light - Emergency stop button on the front - Operating instructions (PDF)

Year of construction: 1996, condition: used, Rated current: 117A, connected load: 68kW, an on-site inspection is possible. Hnjdpfx Asz S Ivgskreu

Year of construction: 1989, condition: used, Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible. Hedpfx Akoz S Iwkeronu

Year of construction: 2015, condition: used, There are two Arburg ALLROUNDER 270S 350-70 available, an on-site inspection is possible. Hnjdpoz S It Sofx Akreu

Year of construction: 2016, condition: used, Rated current: 44A, connected load: 25,5kW, an on-site inspection is possible. Hsdoz S Iucjpfx Akrenu

Condition: good (used), Year of construction: 2001, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 55.0 mm throat 335 mm bore stroke 200 mm bore spindles - Morse Taper MK 4 turning speeds 60 - 1.530 U/min table: 740 x 620 mm feed 0.15/0.2/0.3/0.36 mm/U total power requirement 2.6 / 3.1 kW weight of the machine ca. 850 kg Hnjdpfx Akez S N Dxjrju range L-W-H 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition (!!) Features: - Heavy-duty/robust bench-mounted drill press - Drive: "VARIO" V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots * Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâ??s manual

Condition: good (used), Year of construction: 2013, The Automac 55 più is, without a doubt, the most used industrial machine for packaging fresh products in stretch film. This packaging machine is extremely suitable for the fresh packaging of vegetables, fruit, meat, fish, poultry and cheese. The Automac 55 più is also characterized by a very high operational certainty and reliability. The machine has a standard speed of up to 55 and can be expanded to 62 packages per minute. The machine is very suitable for packaging under difficult conditions and can be expanded with various input channels, output tracks and other options. The Automac 55 più is an easy-to-operate flexible packaging machine. All operations are clearly displayed on a touchscreen, making erroneous actions almost impossible. - with 4 meter supply conveyor - Application: Packaging fresh products in trays - Technique: Stretch film - Operation: Fully automatic - Capacity: Up to 55 packages per minute - Electrical connection :400 V, 3 phase Hz - 4.7 kW - Pack size:- Minimum: 120 x 120 x 10 mm (l x w x h) - Maximum: 230 x 320 x 160 mm (l x w x h) - Foil: Plain and printed stretch film - Foil width: From 330 to 550 mm - Foil thickness: 14 to 35 microns The machine will be completely checked and serviced by a specialized technician! Hnsdpfx Akez S Sqbsreu More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, mileage: 519,780 km, power: 353 kW (479.95 HP), first registration: 09/2020, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,720 mm, total width: 2,550 mm, loading space length: 8,000 mm, loading space width: 2,550 mm, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Accessories = Hnjdpfjzku E Tsx Akreu - Adaptive cruise control - Remote central locking - Refrigerator - Lift axle - Air suspension - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Stationary air conditioning - Toolbox = Notes = New loading platform. Galvanized. Hardwood floor. Hydraulic ramps. Hydraulically adjustable for close contact. Recessed tie-down eyes in the floor. Stainless steel boxes. Loading platform length: 800 cm. Loading platform height: 109 cm. = Further Information = Technical information Number of cylinders: 6 Axle configuration Tire size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steerable; Tire tread left: 75%; Tire tread right: 75% Rear axle 1: Dual tires; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60% Rear axle 2: Tire tread left: 45%; Tire tread right: 45% Weights Unladen weight: 12,040 kg Payload: 14,960 kg GVW: 27,000 kg Identification Model number: XF 480 6x2 / OPRIJ - MACHINE TRA = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: excellent (used), Year of construction: 2018, Soco T55 Random Carton Case / Carton Sealer / Box Taper With top and bottom tape heads Hnjdpehlp E Hefx Akreu With outfeed gravity roller conveyor 400 V, 3 Ph, 10 A Plastic rollers, roller width: 600 mm Height adjustable legs Dimensions: 980 mm x 800 mm Conveyor dimensions 500mm long

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, REF: MM5770 1 x Cime Careddu automatic inline rinsing and filling machine for 1L bottles. Suitable for filling glass and PET bottles. Hjdsulpmzjpfx Akrenu Manufacturer - Cime Careddu Srl Model - SILVER 16/16 (16 x heads). Date of manufacture - 2012. Can handle and fill bottles up to 2 litres in capacity but this unit is supplied with change parts for 1 litre bottles. Overall dimensions - 2.8m L x 1.7m W x 2.25m H. In operation until January 2025, can be viewed working until this point. This unit is a very reliable system and has been very well maintained, used for 30-40 hours (approx) per week. 

Condition: good (used), GEA Aquarius CX360 bagging machine direct from salad packing line. Nice condition. Hnedpfswztmtsx Akrju

Condition: good (used), Direct from factory we have a Koenig bread system. This factory mainly manufactured pies so only had bread machinery as a sideline. Low running hours. inspection is welcomed near Cambridge, UK. Please note the photos show the machine before it has been cleaned, we have many other Koenig sections available too. Hedjw E D Ivepfx Akrenu

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. Hnodpox Dbkcsfx Akrou ✅ Pneumatic supply - 3-6 bar.

Condition: used, Nordson Problue Hot Melt Pump Model - Problue 10 Hnsdpfowq Suuex Akrju Facility to connect up to 6 hoses 10kg Tank Capacity

Condition: excellent (used), functionality: fully functional, total length: 1,205 mm, total width: 1,000 mm, total height: 1,890 mm, REF: MM6147 30 x Stainless-steel hanging racks for curing meat, previously used for hanging chorizo. Hsdpfjx Tg Axex Akrsnu These racks can be stacked one on top of each other. Overall dimensions - 1205mm long x 1000mm wide x 1890mm high. 

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Hnedpfx Asfig Rwokrou Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Axis distance: 920 mm X-axis: 3000 mm Material thickness: Z 12 mm - 30 mm Feed rate: 20 m/min. A-axis: 360 degrees Hedpfx Aocnz H Hokrsnu Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade moves in the X-direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Stable steel cast iron construction With rigid milling spindle 3 spindle speeds from 3500 to 10000 min⁻¹ Milling spindle with clockwise/counterclockwise rotation Large-sized milling head made of cast iron, mounted directly on the table With extraction hood under the work table for improved extraction Solid and precise cast iron table Fast and easy speed changes High-performance motor with 5.0 kW Standard arc milling guard Quality Made in Italy Equipment details Cast iron milling head Mounted directly on the milling table Milling spindle mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10000 min⁻¹ Hnsdpfx Akehp Rcrerou High-performance motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and protective plate for maximum safety. Milling fence Precise milling fence with quick adjustment and fine adjustment with a scale on the fence cheek The integrated extraction port ensures a clear view Milling table opening A large milling table opening also allows the use of larger planing cutters and tenoning and slotting tools above and below the table Arc milling guard Included as standard Reversible fence cheeks Versatile fence that can be integrated to bridge the tool gap Enables safe working even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx. 240 kg Extraction connection Extraction nozzle diameter 2 x 120 mm Work table Work table length 1945 mm Table height 900 mm Work table width 695 mm Installation information Space required Length 1945 mm Machine body Width/Depth 575 mm Space required Width/Depth 920 mm Working area Length 1600 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Working area Width/Depth 1600 mm Machine body Length 1000 mm Explanation of working area: Please add the specified dimensions to the space required to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400 V Motor power 5.0 kW Mains frequency 50 Hz Milling spindle Usable spindle length 100 mm Spindle speed(s) 3500/7000/10000 min⁻¹ Spindle overhang max. above table 130 mm Spindle arbor diameter 30 mm Maximum milling tool diameter Maximum tool diameter that can be lowered 180 mm SCOPE OF DELIVERY Arc milling guard Aluminum fence cheeks Table extension left and right Extendable workpiece support

Condition: new, Year of construction: 2025, Table saw/router combination minimax twf 55 es M 3 UP Professional machine for skilled tradesmen, featuring motorized height and tilt adjustment of the router spindle, four speeds, and electronic control. Article number 5502266 Brand Holzkraft / SCM FEATURES Features Aluminum sliding table ✔ Handle on the sliding table ✔ Router fence FLEX ONE: heavy-duty professional version, automatic adjustment of the entire router fence depending on the tool diameter, manual adjustment of the chip removal, swing-away mechanism, aluminum fence jaws with connecting strips Spindle height adjustment motorized Telescopic miter fence with two folding stops Spindle tilt adjustment motorized Extension table ✔ Control Ready 3: Programmed movement of the routing unit in two axes, automatic adjustment of the entire router fence depending on the tool diameter, stepless adjustment via switch or automatic positioning system Arc routing guard ✔ Position of the controls Control panel at eye level, swiveling Eccentric clamp Hnsdehp Rc Iopfx Akrou TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg Width/Depth (product) approx. 2000mm Connection for dust extraction Dust extraction port diameter 2 x 120mm Work table Work table length 1200mm Sliding table length 1200mm Work table width 530mm Sliding table width 360mm Table height 900mm Sliding table height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width/depth 2910mm Working area length 1600mm Explanation of space requirement The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 2300mm Machine body length 1200mm Explanation of working area Please add the specified dimensions to the space requirement to obtain the recommended clear installation area for the machine. Electrical data Connection voltage 400V Power of drive motor 5.0kW Mains frequency 50Hz Router spindle Spindle tilt 0 to -45° Router spindle speed display Display on the control panel Usable spindle length 125mm Spindle arbor diameter 30mm Spindle speed(s) 3500/6000/8000/10000 min¯¹ Router tool diameter max. Tool diameter max. 240mm Tool diameter max. for profile routing 240mm Tool diameter max. for plunge routing 230mm

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. Hnodpjhqb Rcjfx Akrju A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Hsdpfei Am Uksx Akrjnu Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling) Hnedpfx Akelht Hzersu

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg Hjdpfx Aod R Ev Dokrenu - free for collection - Can be shipped for an additional fee.