Used Väderstad Rapid 3000 for sale (8,237)

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Ibodpfxoiink Sj Anmsa Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm Ijdpfec S N Nqox Anmeba variable three-roller bending machine

Condition: new, GMN TSE 240 cg - SP: 3000-3600-4000-5000 RPM / 37 grinding spindle, shaft diameter: 130mm, front overhang at the thread: 102mm, including test report and installation instructions, new condition: €25,000, unused, 100% functional, scope of supply as shown in the photos. Ibedpfsi D U Trsx Anmea ATTENTION: Please request the costs for packaging and shipping separately!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan Ijdpfx Ansy Samujmoba - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, Year of construction: 1990, table length 3000 mm Ibjdpeftfcwsfx Anmsa table width 2500 mm table height 300 mm total power requirement 0 kW weight of the machine ca. 5,2 t dimensions of the machine ca. 3 x 2,5 x 0,3 m

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 172 kW (233.85 HP), Conveyor belt furnace, electrically heated, type DLE 600/200/3000 G for soldering or annealing under an Exogas atmosphere. -Heating capacity: 172 kW -Soldering/annealing under an Exogas atmosphere Ibsdpfxjy Ddtij Anmja -Conveyor belt width: 800 mm -Clearance height above the belt: 200 mm -Heated length: 3000 mm -Net throughput capacity: 254 kg/h -Maximum temperature: 1120 °C

Year of construction: 2014, operating hours: 12,583 h, condition: used, functionality: fully functional, machine/vehicle number: VKARC1310E0000007, The Stonefex 3000 stone separator reliably and efficiently removes stones and inert objects from biomass. The input product is typically a biomass fraction, such as that obtained from a screen, for example, the woody part of green waste, an intermediate fraction after compost screening, or wood chips. Iodpfx Anezt I Ruomoba

Condition: used, Bar max: 8 m3/h: 211 KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Ijdpfx Anjc Sc E Romoba Kg: 465

Year of construction: 2001, condition: used, Bundle/Stream feeders Built in 2001 Ibedpfx Ansdqpt Iemja

Condition: ready for operation (used), A complete bending line for the production of flange rings is available. Workpiece dimensions X/Y: 440mm/350mm, max. cross-section (S355 NL): 65000mm², max. flat steel length: 22000mm, max. outer ring diameter: 7000mm, max. inner ring diameter: 2320mm, max. ring weight: 11t. 1) Faccin conveyor belt, length: 22000mm. 2) Ring bending machine Faccin Giotto 3000. 3) Flash butt welding machine Asdorfer HY 1500, power: 1500kVA. 4) Faccin handling system, max. ring diameter: 6500mm. Documentation available. On-site inspection is possible. Iedpfx Ansvr Edasmoba

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Iedpfx Anoztz Hcjmsba

Condition: excellent (used), functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 260 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 3,000 mm, rotational speed (max.): 800 rpm, distance table center to spindle nose: 3,000 mm, Equipment: rotational speed infinitely variable, Gurutzpe A1000 x 3000mm lathe with Fagor 8037 CNC, equipped with a 3-jaw hydraulic chuck, 260mm spindle bore, 1000mm swing over the bed, 600mm swing over the cross slide, 260mm tailstock bore, 2 speed ranges of 0-800 rpm, rapid traverse on the X-axis at 8 m/min, rapid traverse on the Z-axis at 8 m/min, rapid traverse at 8 mpm, 140mm tailstock diameter, Morse 6 taper, 650mm bed width, 27 kW power, 12-ton weight. The lathe is in very good condition. Iedpfx Asztz A Rsnmsba

Condition: new, empty load weight: 690 kg, maximum load weight: 2,310 kg, overall weight: 3,000 kg, axle configuration: 3 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, total length: 5,374 mm, total width: 2,034 mm, total height: 830 mm, Year of construction: 2026, Humbaur Universal 3000 with wooden floor including ramps Our price - €4,500 including 19% VAT, 6.4% delivery fee, and vehicle documents. Description: A continuous floor panel on its hot-dip galvanized chassis and frame provides nearly universal transport options. You load the Universal trailer using two ramp boards, which are also protected against corrosion. Adjust the position of the boards to precisely match the track width of the vehicle. Then, simply slide the boards under the loading area. Secure the load using seven lashing rings for a stable hold. You can easily upgrade to an aluminum floor instead of a wooden floor, or aluminum sideboards, or even add a cover with a frame at any time. Technical specifications: Trailer type - Two-axle Weight - 690 kg Total weight - 3,000 kg Payload - 2,310 kg Loading area length - 4,000 mm Overall length - 5,374 mm Loading area width - 2,030 mm Overall width - 2,034 mm Overall height - 830 mm Loading height - 600 mm Tires - 10 inches Standard equipment: V-shaped drawbar, hot-dip galvanized 13-pin connector and reversing light 18 mm thick floor panel 2 hot-dip galvanized ramp boards made of grid flooring, stored under the loading area 2 support legs as standard on the 3500 kg models 7 lashing rings per side in the outer frame profile Perforations in the outer frame profile Ibjdpfjzdcphsx Anmoa Rope winch with rope and 3-way adjustable mounting bracket Automatic support wheel

Condition: used, Barloader BREUNING IRCO SIMAG 42.1 R-3000 Ibodpfewdamfex Anmea

Condition: used, Year of construction: 1990, plate thickness 5 mm cutting length 3000 mm rear stop 750 mm total power requirement 7,5-10 kW Ibedoztf Azjpfx Anmoa weight of the machine ca. 4 t

Condition: ready for operation (used), thread length: 3,000 mm, Maximum spindle bore is Ø 80 mm. The possible diameter from the traverse path is max. Ø 250 mm and min. Ø 20 mm. Machining length: 3000 mm. Comes with accessories: change gears, steady rest. For further technical data, please refer to the PDF file. Iodpfx Anev Huihsmoba

Year of construction: 2019, condition: excellent (used), 2019 Thermo Scientific Dionex Ultimate 3000 RSLCnano Modular UHPLC System Ibodpfszn N Nbjx Anmoa Comprising: NCS-3500RS Nano ProFlow Thermo Scientific Binary Rapid Separation Pump (2019). Dionec Ultimate 3000 WSP-3000TPL-RS Auto Sampler (2019). Ultimate 3000 SRD-3400 Solvent Tray with Degasser (2018). Power Supply 240 Volt.

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm weight of the machine ca.: 11,5 t dimension machine approx.LxWxH: 7,5 x 1,5 x 1,7 m Isdpfxsu Ix Are Anmeba incl. 2x steady rests and various tips *

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 2,015 h, load capacity: 3,000 kg, lifting height: 5,600 mm, fuel type: electric, mast type: triplex, construction height: 2,440 mm, fork length: 1,150 mm, drive type: Elektro, Four-way reach truck Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery year of manufacture: 2024 Ibjdpszt Dyxjfx Anmea Side shifter, fork positioner, 3rd valve, 4th valve.

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Control Techniques, Servo Drive -Type: MAXAX 100/3000 -Input: 1.5 kVA -Output: 1 kW -Number: 2x Servo Drive available -Price: per piece -Dimensions: 275/110/H235 mm -Weight: 2.8 kg/pc. Ibjdezrlixjpfx Anmja

Condition: used, Year of construction: 2015, Swift Cut 3000 W/T Plasma Cutting Machine, 3000mm x 1500mm Cuttting Bed, Hypertherm Powermax 125 Power Source. S/No. 4500318 (2015). Country of Origin: United Kingdom Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Iedpszn Uuiefx Anmoba Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available -Price: per piece Ibedpfx Asw Dzk Eenmea -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 16 stations + manual feeder High-stack feeder, 70 cm SFT 350 S (stitching/folding/cutting) S3 collating station with shaking function A4 landscape orientation Spare knife set Electronic double-sheet, misfeed and stitch wire detection 3 Hohner stitching heads, Universal 43/6 S Compressors Isdpfxozrxfgj Anmsba Approx. 11.9 million stitches

Condition: new, Year of construction: 2026, functionality: fully functional, The StoNail 3000 is an automated portal nailing machine for the efficient production of pallets and boxes. With up to twelve nailing units, two work areas, and four clamping stations, it offers high throughput with reduced setup time. The nailing units, which are controlled in groups, are manually adjusted to the pallets to be produced and automatically moved via the central portal. A 7-inch touch display, extensive safety features, and options such as central height adjustment, robotic stacking, or remote maintenance make the StoNail 3000 a reliable solution for companies that want to efficiently produce pallets with regular nailing patterns. Applications: Standard stringer and block pallets Special pallets & customized solutions Double-deck pallets & mixed pallets Transport frames & packaging elements Box walls & wooden packaging Nailing table with nail bridge: Robust frame construction with a 70° inclination angle for ergonomic operation Machine length: approx. 8500 mm Work area (L x H): 1 pallet: max. 6000 x 1700 mm or 2 pallets: max. 2500 x 1700 mm Option: Extension or shortening of the machine frame by 2000 mm or according to customer requirements Modular pallet stop system for inserting the loose wood and blocks: Parallel adjustable double C-rails Manually adjustable stops for bottom rails, crossbars, and top boards Rivet plates can be used at all positions Stringer prefabrication Option: Equipment with laminated wood panels for custom templates Frequency-controlled nail bridge for positioning the nailing units Equipped with 8 nailing units incl. feed cylinder, nailing unit holder, release, and nailing shoes for limiting the insertion depth Manual quick adjustment of the nailing units depending on the pallet format Collision monitoring: The movement of the feed cylinder is constantly monitored Start button located directly on the nail bridge Nailing units: Uniform nailing unit holder for large and small nail guns Maximum nail length: 90 mm (longer nails available upon request) Option: Equipment of the nail guns with Maxi-Coil magazines for up to 1000 nails Programming: Simple, intuitive programming. The machine takes over part of the programming and performs a learning cycle before the first program start to automatically detect the nail positions. Siemens PLC control with control panel: Touch panel for operating the machine Pallet programming directly on the control panel Storage of the created pallet programs Ibodporalk Refx Anmsa Pallet counter Nail counter: The machine stops as soon as the nails are used up Internet connection for remote maintenance Operating language available in German, English, Czech, and Taiwanese Safety equipment: Emergency stop button on the machine and on the control panel Start emergency stop on the nail bridge Spring-return emergency stop on the nail bridge Option: Safety foot mats for person detection Key features and options can be found on our website.

Condition: used, Year of construction: 2010, We offer you: Ibsdszrl E Hjpfx Anmoa 2 units of CNC cylindrical grinding machines Manufacturer: Junker Type: Jumat 3000/50S Year of manufacture: 2010 Control system: Siemens You can find the technical specifications in the images. Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!