Used Valve Bag Packer for sale (8,290)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. Lajdpjy Urtfsfx Acfjf The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of 20 Foil Waste Bags for Dust Extractors Lodpfxey T E Umj Acfjaf Bag dimensions: 800 × 1200 mm Designed for CORMAK dust extraction systems: FM300, FM300S, FM300SA, FM500,

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of Cloth Bags for Dust Extractors Lsdpfx Acsy T Hbhefsaf Dimensions: Ø500 × 850 mm Designed for the following dust extractor models: CORMAK FM300 CORMAK FM300S The set includes two cloth bags: one upper bag with a mounting handle for installation on the top of the dust extractor, and one lower waste collection bag.

Condition: excellent (used), functionality: fully functional, warranty duration: 12 months, total width: 1,050 mm, total length: 1,690 mm, total height: 2,170 mm, It is a refurbished machine, ready for operation. It functions properly. Laodpfozpw Arex Acfsf

Condition: used, Year of construction: 2016, Overview This CEEM TSS-1845 is a fully automatic side-seal shrink-wrapping machine with an integrated shrink tunnel, built in 2016. Products are fed on the conveyor, wrapped in transparent shrink film with a continuous side seal, and passed through the heat-shrink tunnel to form a tight, retail-ready transparent pack. The machine handles single items as well as grouped products. The side-seal unit is manufactured by Alpha Pack Europe (Italy) as model APSS-5022 and supplied under the Spanish CEEM brand (Grupo CEEM Packaging S.A., Elche). A constant-temperature thermal system provides uninterrupted sealing; product changeovers are made simply by turning the hand-wheels, without changing product guides, and product-length sensors allow automatic length control via the touch-panel control. The machine is still installed and under power and can be inspected on site. Technical data Laodpezk H Nkefx Acfjf - Manufacturer: CEEM - Grupo CEEM Packaging S.A. (Elche, Alicante, Spain) - Model: TSS-1845 (side-seal unit OEM: Alpha Pack Europe APSS-5022) - Year of manufacture: 2016 - Machine type: fully automatic side-seal shrink-wrapping machine with shrink tunnel - Applicable film: POF / PE / PVC, thickness 0.05 - 0.08 mm - Max. sealing width: 500 mm - Max. product height: 220 mm - Packing speed: 30 - 45 packs/min - Conveyor speed: up to 30 m/min - Film reel: outer Ø up to 400 mm, core Ø 75 mm - Power: approx. 3 kW, 380 V - Compressed air: 5 - 6 bar - Weight: approx. 850 kg (side-seal unit; shrink tunnel additional) - Side-seal unit dimensions: approx. 2,100 x 1,960 x H 1,900 mm (excl. tunnel) Equipment - Automatic side-seal sealer with motorized film unwind and continuous side sealing - Heat-shrink tunnel with adjustable temperature control - Touch-panel control, hand-wheel format changeover, product-length sensors - Infeed conveyor Condition Used - in very good, clean condition; still installed and under power at the current site and available for inspection on request. Availability Immediately. Location: Spain. Dismantling, handling and truck loading can be quoted on request (EXW). The machine can be visited on request.

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Laedpfx Aohkzu Ascfsf Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, filter area: 512 m², volume flow: 50 m³/h, total width: 2,450 mm, total length: 8,500 mm, total height: 9,000 mm, warranty duration: 12 months, Equipment: documentation/manual, BAG FILTER - GALVANIZED STEEL STRUCTURE AIRFLOW RATE m³/h 50,000 FILTER FABRIC CLEANING VIA AIR JET WITH CONTROL UNIT FILTER FABRIC AREA m² 512 No. 04 ATEX-CERTIFIED ANTI-EXPLOSION PANELS Lodpezfiy Iofx Acfoaf FILTERED MATERIAL DISCHARGE - SCREW CONVEYOR - ROTARY VALVE UPPER GUARDRAIL - SAFETY LADDER CONTROL PANEL No. 01 ELECTRIC FAN - kW to be defined with the user

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area: 31.2 m² RH 3500 mm Fan: 5.5 kW Diameter: 250 mm, reduced to 300 x 240 mm Laedpfx Aceiamtpofjf Mounting brackets Feet Lid and filter hoses Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. Lasdpfx Aolhqndocfjf - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: new, VARIOUS GATE VALVES Ledpjurk T Nefx Acfeaf A LOT OF VARIETY BRAND NEW

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12349, Sack tip station / Bag dump station with dust collector powered by an integral fan with reverse jet filter cleaning of filtration cartridges. Laedpszf Nhfefx Acfof

Year of construction: 2025, condition: new, functionality: fully functional, A total of 450 unused Big Bags are available for sale. Each pallet contains 150 units. Delivery on pallet is possible for an additional freight charge. Laedjxr Dm Aopfx Acfjf Quality and specifications: Big Bags, form-stable, uncoated, SWL (safe working load) 1250 kg, SF 6:1, 200 g/m², top open, bottom closed, 4 lifting loops, each 25 cm in length, overhang, UV-stabilized on EWP approx. (100x120x100 LxWxH) Dimensions: approx. 101x101x200 cm (external dimensions) No individual bag sales—only by full pallet! The above price refers to one pallet (150 units).

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 010/Q, For sale is a paper bag making machine manufactured by the company GAPS from Italy. Web width: 670–1670 mm Roll diameter: 1200 mm Core diameter: 76 mm Paper weight: 90–140 g/m² Bag width: 240–540 mm Cut-off length with handles: 380–670 mm Gusset: 90–270 mm Handle height: 100 mm Handle width: 16 mm Patch length: 160 mm Patch height: 52 mm Patch roll diameter: 1200 mm Patch roll width: 100 mm Patch roll basis weight: 80–100 g/m² Laedpfsww T Nasx Acfjf Maximum production speed: 120 cycles Connected load: 30 kW Weight: 24,500 kg Machine dimensions: 16,500 × 3,500 × 2,800 mm

Condition: used, Year of construction: 2009, machine/vehicle number: 266, Beutel-Einschweißmaschine / Bag sealing machine Vision Pack Visionbag MF060111 Baujahr / Year 2009 - Serial-No. 000266 Produktion pro Minute 20 Stück / Production uop to 20 pcs/minute Produktabmessungen / Product dimensions: Breite / Width min. 160mm - max. 250mm Länge / Length min. 100mm - max. 360mm Stärke/Dicke / Thickness 15mm Verwendbare Folien: Polyethylen, transparent oder bedruckt (Version mit doppelter Lichtschranke). Stärke max. 30 micron. Films that can be used: polyethylene, transparent or printed (version with double light barrier). Thickness max. 30 microns. Online-Video-Inspection by Skype-Video Laedjut Tipopfx Acfjf We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2008, condition: excellent (used), Traypacker Power Food Capacity: 14,400 cups/hour, 125g/cup, used – in very good condition Technical data: Production capacity: 40 cartons/minute 6 cups/tray = 240 cups/minute = 14,400 cups at 125 g/cup Year of manufacture: 2008 Dimensions: Lsdpfxjd Rwwbs Acfsaf Blanks – L x W x H: 698.5 x 168.0 x 1.5 mm Lids – L x W x H: 95.5 x 95.5 x 9.0 mm Cups – Diameter x H: 92.5 x 42.0 mm Machine dimensions: L x W x H: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg New price: €950,000

Condition: good (used), 1 x Weighing and Bagging System Comprising of: - VFFS Bagger, 10 head multihead weigher, bucket elevator, outfeed conveyor, ICE printer, gantry rails on 3 sides. Ledpfx Acozgc H Djfsaf Cyclone 200B spec; Max speed 80 bags per min Bag width 60-200mm Beg length 50-280mm Power supply 3 phase .375kw Comes with Ice printer *Please note that this machine does not come with steps - only the gantry rails on 3 sides* *UKFM can quote for dismantle of the system and delivery to mainland UK*

Condition: used, Year of construction: 2002, Description to follow! Laodpfx Acewugmmjfsf

Condition: excellent (used), Year of construction: 2008, Description to follow! Ljdjyrhmbepfx Acfjaf

Condition: used, Year of construction: 2000, O F F E R We can offer you, without obligation and subject to prior sale and errors, the following ex stock: H U G O – B E C K Flow Wrapping Machine Type FLEXO 400 Year of manufacture: approx. 2000 Serial no. 12131 _____ Working height: 850 mm Product dimensions: 55-400 mm width Laodpfswugmtsx Acfjf 2-150 mm height 80-unlimited mm length Max. output: 20 m/min 60 cycles/min Machine length: 2000 mm Machine width: 1450 mm Connected load: 3 kW Packaging films: PP, PE, Polyolefin Weight: 650 kg Machine dimensions: 2,140 x 1,450 mm Accessories / Special equipment: • Cross-sealing unit with permanently heated profile sealing element for long service life and secure seals • Side sealing unit, mechanically controlled, permanently heated sealing element for stable seals • Extremely short changeover times without tools • User-friendly control elements • Compact footprint We would also like to point out that, if interested, we have similar packaging machines in stock on site! Condition : Very good Please click here shortly for a video of the machine: Delivery : Ex stock - as inspected Payment : Net - after receipt of invoice

Year of construction: 2015, condition: excellent (used), Rotary valve: JKF type:B-500S (dosing/mixing unit - 3 Pcs.) Device for dosing/mixing EPS polystyrene granulate and regranulate or other similar products. Rotary valves type B-S are fitted with an 8-bladed rotor with hard-wearing rubber blades bolted to the rotor shaft plate profiles. The rotor is separated from the rotor housing by felt ring. The shaft is suspended on bearings and connected directly to the gear motor. The rotor is made of 2 mm plate. Lsdpfoumkm Sex Acfeaf Year of production: 2008, 2008, 2015

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,854 h, load capacity: 5,000 kg, lifting height: 3,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 930 Ah, remaining battery capacity: 84 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-50 electric forklift with the following specifications: * Lifting capacity: 5,000 kg * Lifting height: 3,450 mm * Overall height: 2,550 mm * Year of manufacture: 2018 * Operating hours: 7,854 Still 5.0-ton electric forklift, very good battery, good tires (rear tires new), telescopic mast for clear visibility, side shifter, fork positioner, lighting compliant with StVZO regulations, fork length 1,200 mm, charger. Price ex works, including 1,000 hours of service according to STILL manufacturer’s specifications and a valid FEM (UVV) inspection upon sale. Lsdezivfxspfx Acfeaf Inspection, demonstration, and test drive are available by appointment only. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-loader (transport costs upon request). Further information and offers can be found on our newly designed website!

Condition: used, AZO big bag discharge station Includes vibrating table and vibrating base with metering screw. Lsdpfxszh Ndlj Acfeaf Previously installed on a mezzanine floor. Capacity: approximately 2-3 big bags. Entirely made of stainless steel 316. See our other listings.

Condition: excellent (used), Dinnissen sack discharge system, sack discharge station Laodpswygfyjfx Acfef Semi-automatic machine All stainless steel Equipped with empty sack press Equipped with left-right distribution screw Equipped with DCE Donaldson dust extractor Neat, complete machine

Condition: used, TBMA Galahad bag emptying installation, stainless steel bag emptying machine Type: 750 special All product-contact parts are made of stainless steel. Other parts are coated. Machine is in used condition and sold as is. Equipped with various feed conveyors Optional: empty bag screw compactor Optional: pallet tipper with lifting table Capacity: 400 bags/hour See our other advertisements Lajdpfxswvli Aj Acfef VMA Wekerom

Condition: good (used), Saxon SB1000 Bag Sealer Model SB1000 Stainless Steel Voltage 240v Digital control display Cool down facility Lajdpfx Acjpyhq Asfef Price € 4,950