Used Van Hool Semi Low-Loader for sale (26,428)

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lifting + lowering, ABS (anti-lock braking system), lashing rings. Bjdpfx Asyf E E Ujhmswu Body: Low-bed trailer with 3 hydraulically steered axles and jeep dolly. Including a jeep dolly with a 10t SAF axle and 295/80R22.5 tires! At the rear: 3 x 12t SAF axles! Extendable to 3.2m width, 8m low bed platform! With radio and cable remote control, automatic self-alignment. A detailed technical description is available and can be sent by request! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) Bodpfx Aezzhfuohmowu EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: new, overall weight: 47,000 kg, axle configuration: 2 axles, Year of construction: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Total weight: 47,000 kg Saddle load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3750 mm Saddle height loaded: 1200 mm Rear overhang: 2300 mm Loading area length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Frame length: 2,600 mm Loading height, rear frame at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle track: 1360 mm Overall width: 2,540 mm Total weight depends on the saddle load. Low-bed: Low-bed with external, extendable beams. "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor, approx. 40 mm thick, and mechanical locking mechanism. The supply lines are protected in the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of lashing rings, foldable outwards (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear frame: Rear frame with closed outer frame, diamond-plate flooring and continuous prism-shaped excavator well, approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of lashing rings, foldable outwards (LC 10,000 daN). 1 pair of lashing rings lying in the well (LC 8,000 daN + 5,300 daN). 2 pairs of stake pockets for stake pockets 100 x 50 mm in the outer frame. Gooseneck: Gooseneck in SNT design for optimizing the loading area length, length approx. 3,785 mm. Gooseneck hydraulically adjustable up/down and extendable. Technical saddle load: 23,000 kg For semi-trailer tractor: 4x2, 6x2 and 6x4 PENDULUM AXLE: "PENDULUM AXLE", all axles hydro-mechanically forced steered. Hose burst valve on the axle compensation cylinder with Bwodpfoizu Nwox Ahmju automatic RESET function. Hydraulic cylinders with shut-off valves and quick-release coupling for securing in the raised position. Final coating of the axles with 2 layers of 2-component paint, solid color in "FAY-Gray-34-0260". Technical axle load: 12,000 kg Hydraulic axle equalization. Axle tool. Braking system: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the semi-trailer tractor. Electrical system: Electrical system according to EU regulations, lighting 24 volts ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection bar with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (Yield strength 355MPa) S690QL/S700MC (Yield strength 690MPa) Painting: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) top coat, solid color in RAL colors of your choice. Rear section metallized and painted in RAL 9010 (Pure White). Metallic paint not possible. Tires: Tires 245/70 R 17.5 3PMSF At the manufacturer's option. Load index (146/146F) Preparation for mounting screwable container positioning for 1 x 20' or 1 x 40' container on the outer beams. Without container locking mechanisms. i i2" Kingpin iA galvanized steel front wall, approx. 400 mm high. iA spare wheel with holder in front of the front wall. i2 pieces of wheel chocks with holder on the front wall. iYellow-red air couplings on the galvanized front connection bar. Steering from the front and rear by means of a cable remote control via push buttons, with single-axle control. (without installation in the semi-trailer tractor) i Hydrauli

Condition: used, maximum load weight: 29,380 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2024, next inspection (TÜV): 03/2027, total length: 13,680 mm, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, Kässbohrer tele low-loader with hydraulic gooseneck TECHNICAL DATA: * Saddle height: 1,250 mm * Rear swing door: 2,300 mm * Overall length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Platform extension: 4,500 mm * Locking position: 500 mm * Platform height: 875 mm * Wheelbase: 8,100 mm * Axle spacing: 1,360 mm * 3 x BPW axles with drum brakes * Axle load: 30,000 kg * Load capacity per axle: 10,000 kg * Kingpin load capacity: 18,000 kg * Tare weight: approx. 12,627 kg (±3%) Bsdpfxozrq Dbo Ahmowu * Overall width: 2,550 mm + 600 mm side extensions * Sliding platform not included * Permissible total weight: 52,800 kg (60 km/h) * Permissible total weight: 48,000 kg (80 km/h) CHASSIS: * 2 rigid axles at the front * 1 trailing axle at the rear * WABCO braking system * Tires: 245/70 R17.5 * Spare wheel holder on the front panel * Air suspension * Load indicator for axle load * NATO socket FRAME: * S700 MC steel * Gooseneck with 90° vertical corners * JOST support legs at the front * Foldable supports at the rear RAMPS: * Hydraulic gooseneck * 2 hydraulic ramps * Galvanized steel surface * Ramp length: 4,200 mm * Ramp width: 850 mm * Ramp angle: 9° * Load capacity: 40,000 kg * Height in closed position: 3,510 mm CARGO SECUREMENT: * 14 x 2 lashing points at 5 t * 7 x 2 lashing points at 10 t * 6 x 2 lashing points at 8 t * 8 x 2 stake pockets (52 × 102 mm) * Container locks for 20- and 30-foot containers * Side walls on the gooseneck ACCESSORIES: * Rotating beacon * Work lights * 2 sets of over-width signs with LED lighting * Rotating beacon connector * Storage box under the platform PAINTING: * Chassis in RAL 3020 traffic red We are happy to provide you with further information.

Condition: new, maximum load weight: 35,240 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, total length: 13,200 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLH S HS 3 / 3H – 18 / 30 Low-bed trailer / 3-axle / hydraulically steered Bwodpfoz Ec Trsx Ahmou Immediately available, also available with a grating floor. Manufacturer: Kässbohrer * Type: K.SLH S HS 3 / 3H – 18 / 30 * 3-axle low-bed trailer * BPW axles * Air suspension * Drum brakes * 1st, 2nd, and 3rd axles hydraulically steered * Axle liftable * Manual lift axle control * WABCO EBS 2S/2M with ABS and RSS * Tires: 245/70 R17.5 * M+S / 3PMSF tires * Tire pressure monitoring system * WABCO SmartBoard * Electric motor pump for steering * Semi-automatic tracking of the hydraulically steered axles Dimensions / Weights: Overall length: 13,250 mm * Overall width: 2,550 mm * Fifth wheel height: 1,250 mm * Gooseneck length: 3,900 mm * Platform length: 9,300 mm * Platform height: 875 mm * Wheelbase: 8,800 mm * Axle distance: 1,360 mm * Tare weight: approx. 12,760 kg * Technical axle load: 30,000 kg * Fifth wheel load: 18,000 kg * Technical total weight at 80 km/h: 48,000 kg * Technical total weight at 40 km/h: 51,000 kg Wiese Transporttechnick - Dealer Chassis / Loading platform: High-strength S700 MC steel * 45 mm hardwood floor * Steel floor with drop structure over the wheels * Lateral widening * Widening up to 300 mm * 2" kingpin * Mechanical rear supports, load capacity 45 t * Partially metallized chassis * Rear end tapered by 500 mm / 10° Wiese Transporttechnick - Dealer Ramps: Hydraulic, folding ramps * Ramp load capacity: 40 t * Ramp length: 2,750 mm * Ramp width: 850 mm * Hydraulically adjustable * Hardwood surface * Hydraulic gooseneck ramps * Ramp securing via chain tensioners Wiese Transporttechnick - Dealer Load securing / Equipment: Tie-down points: 10 × 10 t / 12 × 8 t / 22 × 5 t * 16 lashing pockets 80 × 80 mm * 4 container locking pockets for 1 × 20 ft * Tool box on the gooseneck, approx. 2,540 × 600 × 460 mm * Central lubrication system * LED rotating beacon * 2 work lights at the rear * Extendable warning boards with LED position lights * Storage box for widening planks * Chassis color: RAL 3020 Traffic Red Other: LED lighting * Aspöck EUROPOINT 3 LED * Spare wheel holder * 12 rims/tires * Widening panels * Extensive heavy-duty / construction machinery equipment Errors, changes and prior sale are subject to change.

Condition: new, maximum load weight: 48,300 kg, overall weight: 71,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available for immediate and short-term delivery, on our website. Extract from the equipment features. Full specification available on request. GOOSENECK: * Gooseneck with integrated 1-axle running gear (pendulum axle) in detachable design * Gooseneck hydraulically liftable and lowerable, including hydraulic coupling connected with the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with a front taper of approx. 60° * Saddle load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Front bulkhead made of steel, detachable, approx. 400 mm high, with chamfered design * 1 pair of mechanical supports at the front of the gooseneck Bsdoyhkqnspfx Ahmjwu * ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets * 1 spare wheel holder inside on the front bulkhead of the gooseneck with lifting arm * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings in the outer frame of the front chassis, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings at the transition between chassis and loading platform (LC 10,600 daN) * On the gooseneck, 1 pair of plug-in side aluminium drop sides, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in aluminium tailboard, approx. 400 mm high, anodized finish * 3.5-inch king pin * TPMS tire pressure monitoring system compliant with ECE R 141 * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 1 INOX toolbox with 1 lid, mounted on top of the gooseneck on the right in the direction of travel near the aluminium drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING AREA: * Lowbed with external main beams, designed as a telescopic loading platform in low-profile layout with front extension including a fixed approx. 50 mm hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical pin-lug coupling from the lowbed to the chassis to exchange the platform or install extension beams * 1 locking position every approx. 500 mm in the extension section * 4 pairs of recessed lashing rings arranged lengthwise on the loading area, distributed along the outer frame/main beam (LC 10,000 daN) * 1 lashing ring per side on the outside of the rear crossmember (LC 10,000 daN) * Foldable widening sections, approx. 230 mm per side (WITHOUT timber planks) * Detachable widening planks, steel-edged * Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the main beams. Container locks not included * 6 pairs of threaded blocks between the lashing rings under the upper flange on the main beam for mounting screw-type M24 rings (LC 8,000 daN) * 2 pairs of M24 screw rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed external frame, checker plate decking and continuous prism-shaped excavator recess, approx. 1,450 x 900 x 505 mm, open at rear * Pendulum axle, all axles hydro-mechanically forced steered * Hose burst valve on the axle compensation cylinders with automatic reset function * Hydraulic cylinders with shut-off cocks and pre-insertion facility for securing in raised position * Final paint on axles in 2 coats of 2-pack paint, solid colour DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF. Brand at our discretion * Remote steering from front and rear via cable-control, with axle alig

Condition: used, empty load weight: 8,921 kg, maximum load weight: 27,079 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2020, next inspection (TÜV): 04/2027, total length: 2,600 mm, total width: 4,000 mm, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, | Krone TK SLXi 400 refrigerated semi-trailer | SAF axles with drum brakes | 2 spare wheel holders, 1 with spare wheel | Thermo King SLXi 400 refrigeration unit | 5 cm wall thickness | Tires: 385/65 R22.5 | Double-deck without beams | Subject to errors, typos, and prior sale. Bwodpfx Ahszmxpusmsu

Condition: used, empty load weight: 8,370 kg, maximum load weight: 34,630 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 12/2021, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 1,020 mm, suspension: air, tire size: 445/45R19.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, first axle liftable, last axle with trailing steering, ABS (anti-lock braking system), lashing eyes, raise and lower function, detachable loading ramps, rear support, landing legs, toolbox. Bwsdpfx Ahsyhrakemsu Body: Göbel low loader, 43,000 kg. Detachable ramps (reinforced version) available at an additional net cost of €1,800 Loading area: Gooseneck 4,500 mm, bed length 9,100 mm, 1st axle lift with starting assistance, 28 mm sealed hardwood floor, 25 pairs of flush-mounted heavy-duty lashing rings, each rated at 8,000 kg, side rail for lashing straps with claw hooks approx. every 500 mm, rated at 5,000 kg each, insert sleeves, 80 mm stake pockets, chassis hot-dip galvanized. For an additional charge, available with matching tractor unit 2648 LK (17697) and ballast platform (17699)! Approx. 54,160 km mileage! Loading height approx. 1,020 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough Bodpfsw Tgp Djx Ahmewu * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed Trailer with Hydraulic Steering Highlight: Optionally available for rental as a complete combination together with the truck shown in the photo. Manufacturer: Kässbohrer Type / Vehicle Code: K.SLL 2 / 2H ? 18 / 20 Vehicle Type: Lowbed Semi-Trailer Country of Registration: Germany Brand: Kässbohrer Chassis Color: RAL 3020 Traffic Red Dimensions & Weights External Length: 13,210 mm * Overall Width: 2,540 mm * Fifth Wheel Height (H5): 1,250 mm * Platform Height (unladen): 910 mm * Platform Height (laden): 300 mm * Platform Length: 6,810 mm * Extension: 5,550 mm * Gooseneck Length: 3,600 mm * Rear Swing Door: 2,100 mm * Platform Thickness: 200 mm * Wheelbase: 10,530 mm * Axle Spacing: 1,360 mm * Unladen Weight: approx. 12,873 kg (±3%) * Gross Vehicle Weight (40 / 60 / 80 km/h): 42,000 kg * Total Axle Load: 24,000 kg * Perm. King Pin Load: 18,000 kg (40 / 60 / 80 km/h) ----Chassis & Axles 2 Axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional lifting of the driving level by 40 mm possible * Load gauge for axle load display * Semi-automatic tracking of steered axles with warning light sensor ----Brake System WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system in accordance with UN ECE R13 ----Electrics & Lighting 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED rear and fog lights * Electrical system compliant with UN ECE R48 & ADR * LED work lights at rear (2 units, automatic reverse activation) * LED beacon (1 unit) ----Tires & Rims Tire size: 245/70 R17.5 * Tires: M+S * 3PMSF (winter suitable) * Tire pressure monitoring system in accordance with R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on gooseneck ----Steering & Operation Bwedpfx Ajynprwjhmju Hydraulic steering for both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load indicator * Suspension control * Tire & brake wear monitoring * Breakdown & system monitoring ----Chassis & Frame High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallizing (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single ----Platform & Body 3 removable platforms with hardwood floor * Dimensions per platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * Per platform 2 × lashing rings with 8,000 kg tensile force * Platform extension: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized ----Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform * Stake pockets: * 6 × 2 units in pool (50 × 100 mm) * 3 × 2 units at rear (50 × 100 mm) ----Attachments & Accessories Aluminum front panel for gooseneck: 360 × 1,550 mm * Aluminum side panels: 360 × 1,900 mm * Aluminum rear panel: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 15,257 mm, loading space width: 2,530 mm, Equipment: ABS, Broshuis E2190/27 Low-loader, telescopic trailer, steering axle For inquiries: 0926861 * Permissible total weight: 48,000 kg * Tare weight: 9,840 kg * Telescopic * ABS * EBS * 3-axle air suspension * Follow-up steering axle Dimensions (loading area/platform) Length of low-bed: 8,934 mm + 6,323 mm (telescopic) * Platform/gooseneck: 3,630 mm * Width: 2,530 mm Tires: 1st axle: 235 / 75 R 17.5, 30% air suspension 2nd axle: 235 / 75 R 17.5, 30% air suspension 3rd axle: 235 / 75 R 17.5, 30% air suspension, steering axle ----Price: 19,900 EUR + 19% VAT For further questions, you can reach us at the following phone numbers: Bwedpjz Hrxtefx Ahmeu We speak: German, English, French, Polish, and…? Typographical errors, errors and prior sale are subject to change.

Condition: used, first registration: 01/2016, loading space length: 13,382 mm, loading space width: 2,410 mm, loading space height: 3,157 mm, * SAF axles * Hydraulic loading ramp * Hydraulic supports * Winch * Remote control Bedpfx Aewz Dm Djhmjwu * Edscha cover -----Internal vehicle number: 11079----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Bedpjv Sw E Ajfx Ahmswu Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, empty load weight: 7,020 kg, maximum load weight: 35,980 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 02/2023, loading space length: 13,510 mm, suspension: air, tire size: 445/45 R19,5, color: other, gearing type: other, front tire size: 445/45 R19,5, rear tire size: 445/45 R19,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Container closures, extendable, for 2 x 20 ft containers or 1 x 40 ft container, 4 x warning signs with lighting, omega floor with hardwood planks, aluminum rims, Alcoa Dura-Bright finish, front wall approx. 1,800 mm, pallet box for 24 Euro pallets, bracket for securing bars, 16 x bar pockets, 12 x securing bars, approx. 2 m long, new price was €49,000, -- subject to printing errors, mistakes and changes, sample images --, more information available at: !, More Details: ! Bwsdpfxsz H T Rkj Ahmju

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) Bsdpfxsrgzv Ne Ahmewu * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame Bedeyhkqujpfx Ahmewu - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: used, empty load weight: 16,400 kg, maximum load weight: 28,600 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2016, loading space length: 12,400 mm, loading space width: 2,450 mm, suspension: air, color: green, gearing type: other, driver cabin: other, Equipment: ABS, hydraulics, * German complete vehicle from a single owner * Doll heavy-duty low-loader with detachable gooseneck + electric ramps * including MB 2663 heavy-duty semi-trailer tractor 6x4 from the year 2016 Bwsdpfx Ahezk Rchjmju * MB 2663 with large hydraulics, retarder, sleeper cab * Trailer with detachable gooseneck * Payload 35,570 kg * electric, hydraulic loading ramps * complete vehicle from a municipal previous owner * Panther chassis technology * 3 BPW axles, steered * all axles with hydraulic axle equalization * municipal previous owner * laterally positioned driving surfaces * total length 16.61 meters * low-bed length 8.4 meters + 4 meters of extension at the rear * loading height 300 mm * width 2.55 meters * DOLL tronic® - an intelligent operating and control system based on CAN bus. With its sophisticated sensors, it provides easy and safe operation of all central trailer functions. Colored LEDs clearly show you the position of your vehicle. - High-quality keypads at the rear and gooseneck - Control of all functions: gooseneck, steering, driving level - Permanent monitoring of positions - Integrated into the system: operation of the ramps and monitoring of the central lubrication system * Comfortable operation of steering and driving level via keypads and DOLL connect® remote control * Loading ramps, length 2.5 meters - hydraulically adjustable and movable with remote control * Excellent off-road capability with a maximum steering angle of 55° * Single-wheel suspension, hydraulic forced steering and with electro-hydraulic auxiliary steering * Always a horizontal platform thanks to the hydraulic axle equalization * Easy maneuvering in confined spaces and on difficult terrain * Perfect road handling even at low ride height and high load center of gravity * Lashing eyes * Axle load 3 x 12,000 kg * Axle spacing to 1/2/3 axle 1.36 meters * Rotating beacon * Drum brakes * Axles BPW Eco * Storage box * Semi-trailer load 21,000 kg If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our homepage at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that no false impressions arise in the buyer about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, interim sales and errors excepted.

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 12/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 68575 Nooteboom, Euro specification * Year of manufacture: 1999 * ABS (Anti-lock Braking System) * Air suspension * Suspension type: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload capacity: 33,900 kg * Permissible gross weight: 48,000 kg * Axle manufacturer: SAF% * Tyre condition 1st axle: 50% -- 50% | Tyre size: 235/75 R17.5 * Tyre condition 2nd axle: 40% -- 40% | Tyre size: 235/75 R17.5 * Tyre condition 3rd axle: 50% -- 50% | Tyre size: 235/75 R17.5 * Tyre sizes: 235/75 R17.5 * Manufacturer: ES-GE * 3rd axle: hydraulically forced-steered * Telescopic extendable up to 9,950 mm * Telescopic extension defective * Loading platform length: 10,990 mm Disclaimer: Specifications are subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and hassle-free financing options * Application for all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / load securing Bodpfeyibz Rex Ahmewu * TüV approvals, registration service * Transfer of commercial vehicles Feel free to contact our trained specialist staff for professional advice.

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall width of the vehicle: 2990 mm Platform length: 15000 mm Telescopic: Yes / Length of extension 1: 8000 mm Saddle height: 1415 mm Saddle load: 30,000 kg Axle load: 96,000 kg Tare weight: 36,200 kg Bodpfxez Ed D Eo Ahmswu Maximum permissible load: 126,000 kg Payload: 89,800 kg

Condition: new, maximum load weight: 27,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, crane, Step-frame semi-trailer in roll-off tipper design 3 axles with disc brakes SAF axles Lift axle Tires 385/55 R 22.5 Gear-driven winch LED lighting Work lights 25-ton capacity in sliding/articulated design for container lengths up to 7,500 mm Roller height approx. 1,300 mm Hydraulic internal locking Soft stop Quick release Fifth wheel as loading platform with side boards Bjdpjzirgxsfx Ahmjwu 1 unit available in stock. Different equipment/design available on request. Further information available on request.

Condition: used, mileage: 458,597 km, power: 390 kW (530.25 HP), first registration: 03/2019, fuel type: diesel, number of seats: 83, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, trailer coupling, = Other Options and Accessories = - DVD - Air conditioning - Front refrigerator Bwsdpfx Ahoz Iqwdomeu - Sleeper cab - Toilet - USB connections - Webasto heater = Further Information = Height: 400 cm Damages: none = Company Information = We are an international company based in Belgium, located near Brussels (approximately 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and in every price range in stock. We can help you find the right tourist, school, or city bus tailored to your needs or budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Bus inspection visiting hours: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, overall weight: 58,000 kg, Year of construction: 2026, Semi-trailer, drop-deck MAX100 4 A 8.60 U Technical data Speed: 80 km/h Total weight: 60,800 kg Fifth wheel load: 18,000 kg Axle load: 42,800 kg Unladen weight: Payload: Gooseneck length: 3,850 mm Fifth wheel height (loaded): 1,250 mm Loading area length: 8,600 mm Bedpsg Sk T Defx Ahmswu Extendable by: 5,400 mm Axle distance: 1,360 mm Rear deflection radius: 2,300 mm Loading height (max. load): 860 mm Overall width: 2,540 mm Suspension travel: -55/+145 mm Technical description Gooseneck With beveled front corners at 45° and rear bevel of approx. 760 mm x 10° 3 pairs of lashing rings (LC 5,000 daN) Hardwood flooring, 30 mm thick Loading area in extendable design with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) 1 pair of lashing rings, horizontally mounted at the front in the loading area (LC 10,000) Hardwood flooring, approx. 48 mm thick, with diamond plate steel over the axles Ramps Two-part steel ramps One pair of galvanized two-part steel ramps, approx. 2750 + 1400 mm x 800 mm, with approx. 48 mm thick hardwood flooring Ramp with hydraulic up and folding ramp sections, hydraulic lifting mechanism and hydraulically adjustable. Maximum load per pair: 40,000 kg Tires 235/75 R 17.5 Braking system according to EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Paintwork First-class, durable corrosion protection of the standard bead-blasted welded frame guaranteed by a 2-component zinc dust primer High-quality 2-component (2K) topcoat, solid color in RAL color shades of your choice Rear section metallized and painted in RAL 9010 (pure white). Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gear for 24 t Lifting capacity (50 t test load) Steel construction made of high-strength fine-grain steels. Steel grades: Steel construction made of high-strength fine-grain steel S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pole. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Accessories included: One galvanized steel front wall, approx. 400 mm high. 2" Kingpin 4 wheel chocks with holder on the front wall. One bracket for a rotating beacon on the rear of the trailer. SAF axles, two fixed axles, one steered axle, air-suspended, with drum brake, with lifting/lowering function. The trailing steered axle with electro-magnetic reverse lock, which can be activated via reverse gear or manually. Axle tool. Mounting in the rear area of the gooseneck for ALU support ramps. Galvanized folding supports under the bevel of the loading area. Mechanical locking of the locking of the loading area. One spare wheel with holder in front of the front wall. Yellow reflector tape according to EU regulations on the sides, on the extension and at the rear of the trailer. Yellow-red air couplings on the galvanized connection bar at the front. On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs including socket. One mudflap on the rear of the trailer. Manual and description On the gooseneck, plug-in ALU side and rear panels, approx. 2,440 x 400 mm (L x H). The rear galvanized plug-in posts are removable. Length of the superstructure approx. 2,560 mm, +/- 46 kg 3 pairs of WADER container po

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader, Telescopic with Wheel Recesses (NEW) ----Equipment & Highlights Technology & Construction: - Extendable low loader with wheel recesses - Overall length: 13,190 mm, platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Gross vehicle weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles: - 4 BPW axles, front 2 fixed, rear 2 self-steering - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tyres 245/70 R17.5 (M+S + 3PMSF) - Tyre pressure monitoring according to R141 Ramps & Loading Area: - Foldable 40-ton ramps - Ramp length: 2,750 mm, width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel recesses + covering bridges included Bedpfxox Efznj Ahmswu - Digger arm recess at rear Load Securing: - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform - 8,000–10,000 daN on outer frame/wheel recess area - 5×2 stake pockets, removable stanchions 50×100 mm - Container locks for 1×20 ft or 1×30 ft containers Equipment & Comfort: - 1× tool box (700×400×360 mm) - Stanchion box - Beacon light - LED side lighting, LED work lights - Wheel chocks - Width marker boards with LED - Standard 2" kingpin - Metallized chassis (Zn/Al 85/15) – high corrosion protection - Colour: RAL 9005 Black ----Special features: - New & immediately available - High payload, extremely flexible application - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust construction, high-quality BPW components For further information, we are at your disposal.

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) * Air suspension * Extendable * Tare weight: 11,020 kg Bwodpfewta Alex Ahmsu -----Internal vehicle number: 11010----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: new, maximum load weight: 96,500 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, loading space length: 26,900 mm, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Bwedpfx Ahszahp Someu * Hydraulically extendable/retractable and lowerable gooseneck. Length approx. 3,650 mm * For semi-trailer with multiple axles (SZMs): 6 x 4 or 8 x 4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for suspending the supply lines, the SZM tank must have a minimum capacity of 80 l * With MAX Trailer coupling parts, otherwise coupling parts must be supplied by the customer * Gantry with winch for spare wheel on the front of the gooseneck * 3.5-inch kingpin * Steel front panel approx. 400 mm high * Plug-in aluminum side and rear panels on the gooseneck, approx. 400 mm high, in anodized finish * Control levers on the gooseneck protected by a folding cover * Lighting for the controls on the gooseneck with on/off switch * A 7-pin socket on the left and right at the rear of the gooseneck for the warning sign * BEKA-MAX central lubrication system for a gooseneck with standard grease NLGI-2 * Hydraulic connections from the gooseneck to the low-bed with screw couplings * Access to the gooseneck * Four warning signs that can be extended by approx. 1,000 mm, approx. 423 x 423 mm, with an LED position light and a mounting bracket for a rotating beacon * Mounting adapter for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Power: 9.5 kW (12.9 hp) at 3000 rpm * Hydraulic connection lines between the power pack and the connector plate on the gooseneck * 1 LED work light on the left and right at the rear of the gooseneck with separate on/off switch * Radio remote control: - Operation of the power pack, start/stop of the diesel engine. - Operation of the trailing axle steering, in addition to the cable remote control, with 2 LED indicator lights on the receiver as a single-axle control. - Operation of raising/lowering the gooseneck - Operation of raising/lowering the suspension of the chassis 2-axle front bogie: * Bolt-on coupling at the front and rear. Length: approx. 2,970 mm. Chassis width: approx. 2,750 mm * BEKA-MAX central lubrication system for a 2-axle chassis with standard grease NLGI-2. (not connected to the track rods) * A 7-pin socket on the left and right at the rear of the front bogie for the warning signs * Surface of the chassis with a sand-blasted coating for slip resistance * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * A 7-pin socket for the warning signs, on the left and right on the front chassis, in the area of the axles * Extendable widening elements by approx. 230 mm on each side for a 2-axle chassis * 1 pair of M42 threaded blocks between the axles of the front bogie * 1 pair of brackets for the warning signs for insertion into the pocket recesses in the outer frame of the loading platform Loading platform: * 6-axle double-extendable loading platform with bolt-on coupling at the front and a slope of approx. 500 mm x 8° at the rear * Loading platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Basic width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the loading platform with standard grease NLGI-2 * Surface of the loading platform with a sand-blasted coati