Used Vem Antriebstechnik Vde 0530Ti/7.91 for sale (577)

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Predpfx Ajzg Dx Usmxjb Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: like new (used), Screw Jack GROB RTP 502-000-8 Screw Jack RTP 502-000-8 GROB 40:23 240/01 00000 Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Design: screw jack / lifting gear Item number: 213554 Drawing number: 90010016737 Podpfx Amoyrydloxsrb Packaging: original wooden crate Condition: unused, original packaging from warehouse clearance

Condition: used, Year of construction: 2011, functionality: fully functional, Werth Metrology: Scope - Check 650 MB Z 3D CNC 650x750x500 Standard accuracy Measuring range: X = 650 mm Y = 750 mm Z = up to 500 mm The measuring range available for measuring workpieces is determined by the sensor and accessory configuration. Machine dimensions: W = 1230 mm D = 1560 mm H = 2550 mm Max. permissible workpiece weight: 500 kg Machine weight: approx. 1410 kg Podpfey Uly Sex Amxorb Coordinate measuring machine in bridge construction for 3D CNC operation with standard accuracy. The multi-sensor concept supports combined measurement with multiple sensors. Technical features: - Base unit on a solid base in a "moving bridge" design - Air-bearing bridge in the Y-axis with integrated air-bearing carriage in the X-axis and air-bearing Z-axis on a solid base - Maximum permissible length measurement deviation MPE in accordance with ISO 10360 or VEDI VDE 2617 (with motorized zoom optics, maximum magnification, or sensor with the same or better probing deviation) The device functions perfectly. The measuring machine can be tested on-site if desired. Important information: A computer with the operating system Windows XP is also included – it runs smoothly. Software version of Werth measuring software: - see photo. If someone wants to have a current operating system, the update must be performed independently.

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 2,400 mm, total height: 1,400 mm, total width: 1,300 mm, Kallfass Shrink Tunnel STANDARD 650 NT Universally applicable high-performance shrink tunnel with side-adjustable air flaps and externally adjustable bottom air outlets for precise control of the hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculation system, a tunnel hood with an additional double-chamber system, and significantly enhanced all-round insulation provide energy-efficient operation. Equipped with infinitely variable rod chain conveyor. This tunnel is suitable for use with all shrink films, especially polyethylene (LDPE) or polyolefin films, in medium to high performance ranges. Comprehensive standard features: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Infinitely variable speed adjustment for the rod chain conveyor • Wear-free, contactless temperature control • Energy-saving, highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Air outlet flaps adjustable from outside during operation • Fixed clearance height 200 mm • Adjustable working height • Safety equipment in accordance with EC Directive EN 60204: over-temperature monitoring • Machine design complies with EC Machinery Directive 98/37/EC (CE mark), built to EN/VDE standards and relevant accident prevention regulations for the food and beverage industry (GS test mark) Technical Data of Base Machine: Tunnel passage width: 650 mm Tunnel passage height: 200 mm (fixed) Length of heated tunnel hood: 1400 mm Extended tunnel outfeed: approx. 500 mm Working height, adjustable: 800 - 900 mm Product transport: rod chain conveyor, silicone-coated rods, rod spacing 25 mm, rod diameter 12 mm Transport speed, variable: 6 - 22 m/min Podpfx Amey Ic Hisxerb Drive: three-phase geared motor 0.37 kW, frequency-controlled Heater blower output: constant Airflow adjustment: sliding dampers underneath and side air flaps, externally adjustable Temperature control: electronic thermostat, switching accuracy ± 0.2°C Control voltage: 24 V DC Power supply: 400 V three-phase current, 50 Hz with protective earth Installed heating capacity: 18 kW (average continuous consumption approx. 40%) Power rating: 20.5 + 11.1 kVA Nominal current at 400 V: 29.6 A in standalone mode Max. total connected load: 45.6 A incl. additional three-phase connection Control cabinet position and operator side: on the left in working direction Paint finish: Kallfass anthracite

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives Pedpfsy Iub Sox Amxorb - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. Prodpfx Aszil T Eemxjb In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: new, Screw gear RTP 502-000-8 GROB 40:23 240/01 00000 Screw gear GROB RTP 502-000-8 Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Prsdpfx Amszd Ny Ssxjb Design: Screw gear Drawing number: 90010016737 Packaging: Wooden crate Condition: unused, packaged

Condition: excellent (used), Primus Engineering Type: DST 350 This testing equipment was designed for performing IP protection class tests for "dust" according to, for example, DIN 40050 Part 9 and DIN EN 60529. The testing equipment is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Predefined test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 kW Connection voltage: 400V/50Hz 3-N/PE (16A CEE socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Pedpozgbtiefx Amxerb Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 6,000 mm, loading space height: 2,600 mm, Equipment: lighting, Ready for immediate delivery, turnkey and in stock Dimensions: Length: 6.0 m Prjdpoy Hkbxjfx Amxob Width: 3.0 m Height: 2.6 m External area: 18.0 m² Insulation thickness: 5.0 cm Colours: Panel: RAL 7016 (anthracite) Base frame: RAL 7016 (anthracite) Block Line cladding 3.0: RAL 7016 Weight: 1,300 kg Door: 1x PVC glass door, double-glazed Windows: 2x floor-to-ceiling, vertical PVC windows (100 x 200 cm), double-glazed, tilt-and-turn function Electrical installation: According to VDE standard 3-phase, 32A CEE plug (red) 3x double power sockets Lighting: 2x lamps 1x light switch Air conditioning: Split unit for heating and cooling, included in the price ----- Optional additional equipment (at extra charge): Double-leaf doors: For wider access and improved transport options. Additional doors: Flexible access options. Additional windows: Enhanced ventilation and daylight. Additional double windows: Improved thermal and sound insulation. Additional floor-to-ceiling windows: Modern design and generous lighting. Roller shutters: Privacy and sun protection for light and visibility control. Glass façade: Bright ambience thanks to fully glazed front. Woodstyle façade: Wooden finish for a warm, aesthetic appearance. Separate rooms: Flexible use of space through additional room partitions. WC: Integrated sanitary unit for greater comfort. Shower: Addition to the sanitary unit, ideal for longer stays. Air conditioning: Additional heating and cooling functions. Insulation: Choice of 50 mm, 60 mm, 80 mm, 100 mm, or 120 mm. Forklift pockets: Easier handling with forklifts. ----- Delivery: Nationwide delivery possible with crane vehicles. To calculate the delivery price, please provide your postal code. Delivery time: 1–4 weeks, depending on distance and availability (standard container or custom-built).

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, total length: 3,200 mm, total height: 1,500 mm, total width: 1,020 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 320 mm, product width (min.): 150 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 360 mm, passage height: 100 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Packaging Machine Series Wrapper S 1732 with Conveyor Belt - Used equipment, year of manufacture: 2009 The machine is equipped with a photoelectric control system that adjusts the working cycle according to the length of the product to be packed. This allows products of varying lengths to be packed in any sequence. The machine's height and side adjustments can be made in seconds via a handwheel. Operating Principle: The machine operates in cycles, fully automatic, with photoelectric control. Products to be packed are fed into the machine via a special infeed conveyor and are sealed on all four sides. Oil-hydraulics ensure precise operation of the sealing unit. The sealing process uses an impulse-separation welding method and can be fitted with additional specialized sealing elements. An accurately adjustable, stepless temperature control of the sealing tools prevents unwanted odors. Operating Speed: The actual production speed and effective net output depend on the format, type, and composition of the products and can reach up to 1,500 packages per hour. Standard Features: - Special rewinding unit for film waste - Film waste monitoring - Hydraulically operated sealing plungers - Photoelectric control of product length - Continuous longitudinal sealing (endless) - Impulse sealing with adjustable pre-heating for separation seams - Cycle-controlled cross sealing - Special configurations for precise film and product conveyance - Stepless height and side adjustment - Broadly designed and adjustable electrical controls for sealing temperature, sealing impulse, sealing time, and film control - Standard safety equipment The machine complies with VDE and all safety regulations. Working width: 170 - 320 mm, stepless side adjustment Product height: max. 80 mm, depending on product, format, film quality, and thickness Power supply: 380 V three-phase, 50 Hz Connected load: 3 kW Colour: cream-white Additional Equipment: - 1 special infeed conveyor integrated into the machine • Height and side adjustable Psdpfx Ajy H Dqtjmxsrb • Belt length: 1,500 mm • Belt width: 150 mm • With stop motor and laterally adjustable guide rails - 1 plug-in axle film supply rack • Expanding mandrel with mechanical clamping device for upper and lower film • For smooth film feed, suitable for film thicknesses from 12 µm • Max. roll diameter: 300 mm • Min. core inner diameter: 76 mm

Condition: repair required (used), functionality: limited functionality, Packaging Machine Serial Packer S 1732 - Used machine, year of construction approx. 1986 - Inspected, tested, and ready for operation The machine is equipped with a photoelectric control system that adjusts the operating cycle according to the length of the product being packed. This allows for the packaging of items of varying lengths in any sequence. Height and lateral adjustments can be made in seconds using a handwheel. Operating Method The machine operates in cycles, fully automatic with photoelectric control. Products to be packaged are fed into the machine via a special infeed conveyor and are four-side sealed. Oil hydraulics ensure precise operation of the sealing unit. Sealing is performed using the impulse-cut sealing process and can be equipped with additional special sealing elements. By precisely and infinitely adjusting the temperature of the sealing tools, odors are avoided. Predpoy H D Edofx Amxob Operating Speed The actual production speed and effective net throughput depend on the shape, type, and arrangement of the products, and can be up to 1,000 packs per hour. Standard Features - Special film waste rewinding unit - Film waste monitor - Hydraulically operated sealing stamp - Photoelectric package length control - Continuous endless longitudinal sealing - Impulse sealing with adjustable pre-heating for separating seam - Cycle-controlled transverse sealing - Special designs for precise film and product transport - Infinitely adjustable height and side settings - Wide-range adjustable electrics for sealing temperature, sealing impulse, sealing duration, and film control - Standard safety devices The machine complies with the VDE and safety regulations of its time. Working width: 170 - 320 mm, infinitely laterally adjustable Product height: max. 80 mm, depending on article, format, film quality and thickness Power supply: 380 V three-phase, 50 Hz Connected load: 3 kW Color: Hammer finish paint, light grey Additional Equipment 1 piece Special Infeed Conveyor integrated into the machine Height- and side-adjustable Conveyor length: 1,500 mm Conveyor width: 150 mm With stop motor and laterally adjustable guide rails

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 1,700 mm, type of input current: AC, total width: 750 mm, total length: 900 mm, overall weight: 300 kg, input voltage: 230 V, table load: 15 kg, year of last overhaul: 2025, ambient temperature (max.): 30 °C, ambient temperature (min.): 12 °C, maximum load weight: 20 kg, Equipment: documentation/manual, lighting, type plate available, Fully factory-refurbished and modernized multisensor coordinate measuring machine Mahr MS222 with a modern 64-bit CNC controller and Windows 11, including 12 months warranty and full support from the specialized service company. The measuring device has been completely factory overhauled and reconditioned, equipped with a modern new controller and the latest version of our measurement software. The measuring system will be delivered and set up at the customer’s site for the above-mentioned price. Additional optional services: On-site commissioning / calibration Training Custom measurement programming for immediate start of part inspections Complete package includes: Measuring machine 64-bit CNC controller Industrial PC with Windows 11 Perpetual software license OptiCheck3D 2025 (full license of the measurement software with no subscription or maintenance contract) Multisensor head with high-resolution industrial camera Renishaw TP20 touch probe system (alternatively TP200 system available) including one standard force module Calibration artifact Prsdpfswcxb Sjx Amxeb Acceptance certificate / calibration certificate (pre-shipment condition) Free delivery within Germany (EU and international shipping available on request) Specifications: Measuring range: 200 x 200 x 200 mm Load capacity: 10 kg on glass plate Scale resolution: 0.1 µm Max. travel speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Accuracy according to VDI/VDE 2617 Sheet 6, ISO 10360-2: U1 = 1.9 + L/200, U2 = 2.2 + L/150, U3 = 2.9 + L/100

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Belt conveyor on solid base frame with feed hopper -Speed: 3.4/6.6 m/min -Belt width: 190 mm -Conveyor length: 745 mm -Drive: VEM 0.14/0.25 kW, see photo nameplate -Transport dimensions: 460/1255/H1185 mm Pedpovazpujfx Amxorb -Weight: 149 kg

Condition: ready for operation (used), Philips 4022 226 3622 LM / LM DRIVE MOD board, E-version: 4 / B, used, in good condition, 100% fully functional, delivery scope as per photos. Prsdpox Et Tbjfx Amxjb

Condition: ready for operation (used), SEW Eurodrive MCF40A0040-5A3-4-00 inverter SN: 102121 + MDX60A0040-5A3-4-00 power unit SN: 0173076, professionally fully overhauled and tested with 12 months warranty, 100% functional. Delivery as per the photos. Agreed sales discounts do not apply to this item. Please inquire about the price separately! Pedpfsx Euhgox Amxorb

Condition: new, SEW MOVIDRIVE SEW MDX61B0005-5A3-4-0T inverter SN: 01.1795110801.0001.12, unused in opened original packaging, 100% functional, delivery as per photos. Prodjx Euiqopfx Amxob

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm Prodpfx Amexm Rziexsb -Travel: 350 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. Prsdsxhquxepfx Amxsb It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 0400-01-0010000, type of input current: AC, overall weight: 2,750 kg, input voltage: 10,000 V, input frequency: 50 Hz, total height: 1,953 mm, total width: 1,000 mm, total length: 1,600 mm, warranty duration: 72 months, nominal power (apparent): 1,000 kVA, nominal power: 1,000 kW (1,359.62 HP), secondary voltage: 400 V, protection type (IP code): IP00, temperature: 40 °C, empty load weight: 2,750 kg, space requirement width: 1,600 mm, space requirement length: 1,000 mm, space requirement height: 1,920 mm, ambient temperature (max.): 40 °C, roll spacing: 820 mm, Equipment: documentation/manual, type plate available, Three-phase cast-resin transformer Designed according to DIN EN 60076-11, VDE 0532, with separate winding Reduced no-load losses in accordance with Ecodesign Regulation EU No. 548/2014, Eco Directive 2009/125/EC Design features: - Flame-retardant and self-extinguishing - High-voltage winding vacuum-encapsulated, low-voltage winding vacuum-impregnated - Partial discharge-free (< 5 pC) - Taps can be changed in the de-energized state using switch lugs - Mobile design, 4 interchangeable transport rollers - Winding material: aluminum/aluminum - 4 lifting eyes, 4 draw eyes, 2 grounding screws - Documentation: Dimensional drawing, nameplate, data sheet, circuit diagram, operating instructions in German/English - Use of double-sided insulated, grain-oriented, low-loss electrical steel sheets - Reduced power losses A0 Level 2/Ak (Eco Directive 2009/125/EC) - Suitable for converter operation, THDu < 5% - 3x PT100 connected to terminals in the terminal box (IP 54) RATED POWER: 1000 kVA CIRCUIT: Dyn5 OVERVOLTAGE: 10 kV, with a value of ± 2x 2.5% FREQUENCY: 50 Hz Podpfx Amov U Ncrexorb UNDERVOLTAGE: 400 V + N SHORT-CIRCUIT VOLTAGE: 6% (tolerance ±10%) NO-LOAD CURRENT: 0.6% (tolerance +30%) INSULATION LEVEL HV (AC/LI): 12/28/75 kV – L2 INSULATION LEVEL LV (AC/LI):

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Podpfxjx T Ah Dj Amxjrb Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: used, Year of construction: 2025, New demonstration machine! List price: €4,938 net. The upper part is made of heavy-duty cast iron and features a built-in three-phase motor, 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; motor circuit breaker and main switch according to VDE; dimensions of the sanding belt backing: 850 x 150 mm; steel table with height adjustment via spring pressure; belt dimensions: 150 x 2280 mm; the sanding belt backing is coated with a graphite sliding layer; the machine is supplied with a set of sanding belts; additionally included in the scope of delivery is an angle and miter fence. The machine is dust-tested (GS) according to Holz-BG-Stuttgart when connected to a central dust extraction system with an air velocity of at least 20 m/s. Standard equipment: - swiveling 90-180° - motorized belt oscillation - small support table on the idler pulley - pneumatic belt tension. Technical data: Motor power: 2.2 kW, sanding belt dimensions: 150 x 2280 mm, sanding belt speed: 22 m/s, table size: 750 x 350 mm, space requirement: 1000 x 800 mm, weight: from 180 kg, dust extraction port diameter: 100. Pedpfx Amox Hwpvoxorb Storage location: Rieth.

Condition: used, Year of construction: 2009, Manufacturer: Romaco - Frymakoruma Model: Dinex Lab Year: 2009 Type: Vacuum mixer for R&D or small-scale production Application: liquid and/or viscous (semi-liquid) products = dispersion, homogenization, emulsion, grinding, and pumping of the product Tank: Pressure: -1 / 0 bar Volume: 18 L Temperature: 130°C Jacket: Pressure: 6 bar Volume: 2 L Temperature: 180°C Homogenizer: high-speed agitation 2 modes = Pumping with discharge / Dispersion with high shear force Psdsx R D Elspfx Amxorb Tool size: 100 mm Rotor: 20 x 4 mm Stator: 30 x 4 mm VEM motor 7.5 kW / 2890 RPM Scraper mixer: slow agitation SEW 0.37 KW motor Sterling SIHI LEMA 25 liquid ring vacuum pump Power 1.1 KW - Max. 16 m³/h. CIP (clean in place) 2 x feed hoppers, 1 of which is connected to the jacket with its piping Air pressure: 6 bar Water pressure: 6 bar Temperature control regulator Single-acting seal: reconditioned by Burgmann Paper documentation Weight: 750 kg

Condition: used, machine/vehicle number: 18331, test stand for performance up to 2.2 KW speed control speed change hand remote control with cable for switch of speed and rotational direction data concerning converter please refer to type plate connection cable CEE 32A output CEE 16A space requirements width - 600 x depth - 650 x height - 1,750 mm rollable weight approx. 85 kg Pedpjghwwxsfx Amxsrb  

Year of construction: 2011, condition: ready for operation (used), The ultrafiltration system is used to purify various liquids. The membrane elements feature a 37/3.8 channel design, a pore size of 0.1 µm, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods, with a total capacity of 2,000 L/h per module. 1 structural frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air membrane pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, Prsdpof Dc D Hefx Amxeb 1 control unit compliant with VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the system at the supplier's factory.

Condition: good (used), Mn 14.0 Nm S1 3000 rpm Mi 150 V Predpfx Aod A Rwismxjb IEC 71 IM B5 VDE 0530 PTC thermistor Z H40 K31 K8