Used Vice for sale (1,166)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 5, This 5-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) • Travel Z: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V Podpfeyrqvlex Ah Hjra • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h • Control: Rexroth IndraMotion MTX Additional equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lightingPlease note: the vice and zero-point clamping system shown are not included in the scope of delivery. Technical Specification Taper Size SK 40

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Prsdpfx Aow Agxrsh Hea Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: refurbished (used), Year of construction: 2017, operating hours: 9 h, load capacity: 2,000 kg, lifting height: 2,500 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are overhauled in accordance with FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including the drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test and receive expert advice on-site – we’ll find the right solution for you. Industrial Truck Data Manufacturer: Jungheinrich Model: Li 119-250 DT – Electric Pedestrian Stackers with High-Lift Drive type: Electric Load capacity: 2,000 kg Lift height: 2,500 mm Load center: 600 mm Pjdpfx Ahsy Rm Age Hora Year of manufacture: 2017 Operating hours: 4,534 h Mast type: Triplex Fork length: 1,200 mm Overall height: 1,300 mm Unladen weight: 950 kg Battery voltage: 48 V C5 capacity test: 24V 375Ah (test report included upon delivery) Charger voltage: 48 V (available on request) Attachments: Special equipment: Tyres front: Polyurethane Tyres rear: Polyurethane

Condition: refurbished (used), Year of construction: 2018, operating hours: 5,580 h, load capacity: 2,500 kg, lifting height: 122 mm, fuel type: electric, mast type: simplex, construction height: 1,300 mm, fork length: 1,150 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. Over 350 vehicles in stock Custom modifications of any type possible to meet customer requirements. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise Full functionality according to FEM-4.004 Serviced & tested (C5-test) battery for electric units (minimum 70% capacity) Pjdey Rm E Ujpfx Ah Hsra

Condition: refurbished (used), Year of construction: 2015, operating hours: 16,036 h, load capacity: 1,600 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,200 mm, fork length: 1,200 mm, – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. Over 350 vehicles in stock Custom modifications of all types available on request. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise Full functionality in accordance with FEM-4.004 Pjdpfxey Rm Hxe Ah Hjra Serviced & tested (C5 test) batteries in electric units (min. 70% capacity)

Condition: refurbished (used), Year of construction: 2013, operating hours: 13,101 h, load capacity: 2,000 kg, lifting height: 6,500 mm, fuel type: gas, mast type: triplex, construction height: 2,772 mm, fork length: 1,150 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers, fully maintained, tested, and reconditioned by us according to FEM-4.004 (UVV) standards. Predpfjy Rm Icox Ah Hsa • Over 350 units in stock • Custom modifications of any kind possible upon customer request • International transport with suitable vehicles and customs processing upon request • See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise • Full functionality as per FEM-4.004 • Inspected & tested (C5 test) batteries in electric equipment (minimum 70% capacity)

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,334 h, load capacity: 2,000 kg, lifting height: 750 mm, fuel type: electric, construction height: 1,300 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION Pedpjy Rm N Tsfx Ah Hjra WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. Over 350 vehicles in stock Custom modifications of any type possible to meet customer requirements. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise Full functionality according to FEM-4.004 Serviced & tested (C5-test) battery for electric units (minimum 70% capacity)

Condition: refurbished (used), Year of construction: 2017, operating hours: 4,305 h, load capacity: 2,000 kg, lifting height: 122 mm, fuel type: electric, mast type: simplex, construction height: 1,350 mm, Friedmann Forklifts – Remade for Action Used industrial trucks from selected premium manufacturers, fully serviced, tested, and professionally refurbished by us in accordance with FEM-4.004 (UVV) standards. Custom modifications of any kind available upon customer request. International transport with appropriate vehicles and customs clearance is available on request. Psdpfx Aey Rm Szeh Hera See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Commitment - Fully functional according to FEM-4.004 - Inspected & tested (C5 test) battery for electric units (min. 70% capacity) - Usable tyres according to FEM-4.004 (min. 70% tread depth) - Mast, carriage, attachments, and hydraulic system inspected - Steering axle safety checked - Forks and lift chains with max. 30% permissible wear - Driver’s seat and seat belt in as-new condition - New paintwork in original colours with original decals Equipment Data - Manufacturer: Jungheinrich - Model: EJE 220 – Low-level pallet truck with 122mm initial lift - Drive type: Electric - Load capacity: 2,000kg - Lift height: 122 mm - Load centre: 600 mm - Year of manufacture: 2017 - Operating hours: 4,306 - Mast type: simplex - Fork length: 1,150 mm - Charger voltage: 24 V (available on request) - Front tyres: 0 x / polyurethane / - Rear tyres: 0 x / polyurethane /

Condition: refurbished (used), Year of construction: 2012, operating hours: 13,828 h, load capacity: 2,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: duplex, construction height: 2,805 mm, – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. Over 350 vehicles in stock Custom modifications of all types available on request. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise Full functionality in accordance with FEM-4.004 Serviced & tested (C5 test) batteries in electric units (min. 70% capacity) Prsdpfx Aoy Rna Tjh Hsa

Condition: refurbished (used), Year of construction: 2016, operating hours: 15,722 h, load capacity: 1,400 kg, lifting height: 8,300 mm, fuel type: electric, mast type: triplex, construction height: 3,300 mm, fork length: 1,300 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. Over 350 vehicles in stock Custom modifications of any type possible to meet customer requirements. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise Psdpfxjy Rnbko Ah Hora Full functionality according to FEM-4.004 Serviced & tested (C5-test) battery for electric units (minimum 70% capacity)

Condition: refurbished (used), Year of construction: 2008, operating hours: 7,964 h, load capacity: 5,000 kg, fuel type: electric, Industrial Truck Data Psdpfx Ahjy Rngye Hora Manufacturer: Jungheinrich Model: EZS 350 LJ - Tow Tractor Drive type: Electric Load capacity: 5000 kg Year of manufacture: 2008 Operating hours: 7964 Serial no.: 91543721 Condition Workshop-inspected Professionally refurbished visually New UVV inspection on request at extra cost Dimensions Length: 1440 mm Overall width: 800 mm Overall height: 1420 mm Dead weight: 745 kg + 402 kg battery Battery & Charger Battery voltage: 24 V 465Ah Battery year: 33/2019 Battery capacity: 465 Ah Charger voltage: 24 V

Condition: refurbished (used), Year of construction: 2014, operating hours: 2,269 h, load capacity: 2,000 kg, fuel type: electric, mast type: simplex, construction height: 1,300 mm, Manufacturer: BT Model: BT LWE 200 – low-lift pallet truck Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2014 Operating hours: 2,269 Serial no.: 6071472 Pedoy Rnhdopfx Ah Hjra Mast data/forks Mast type: - Lift height: 54 mm

Condition: refurbished (used), Year of construction: 2013, operating hours: 4,386 h, load capacity: 2,000 kg, lifting height: 54 mm, fuel type: electric, mast type: simplex, Friedmann Forklifts – Remade for Action Used industrial trucks from selected premium manufacturers, fully serviced, tested, and thoroughly refurbished by us in accordance with FEM-4.004 (UVV) safety guidelines. Custom modifications of any kind available to suit your individual requirements. International transport with suitable vehicles and customs clearance available on request. See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Commitment • Full operational readiness as per FEM-4.004 • Serviced & tested battery (C5 test) for electric units (minimum 70% capacity) • Serviceable tyres compliant with FEM-4.004 (minimum 70% tread depth) • Mast, fork carriage, attachments, and hydraulic system fully inspected • Steering axle checked for safety • Fork tines and lift chains with max. 40% wear limit • As-new driver’s seat and safety belt • New paint finish in original colours with original decals Industrial Truck Data NEW BATTERY NEW LOAD ROLLERS / SUPPORT WHEELS / DRIVE WHEEL • Manufacturer: Jungheinrich • Model: EJE 220 – Low-lift Pallet Truck • Drive type: Electric • Capacity: 2,000 kg • Lift height: 540 mm • Load centre: 600 mm • Year of manufacture: 2013 • Operating hours: 4,386 • Serial number: 98071540 Mast / Fork Data • Mast type: single-stage • Lift height: 540 mm • Fork length: 1,200 mm Dimensions • Own weight: 490 kg Battery & Charger Pjdpfx Ahoy Rnhqj Hsra • Battery voltage: 2x 12V AGM long-life battery • Battery year: NEW • Charger voltage: 24 V (on request) Attachments & Special Equipment • Attachments: • Special equipment: Load protection guard • Front tyres: 0 x / polyurethane / • Rear tyres: 0 x / polyurethane /

Condition: used, Year of construction: 2006, x-travel 630 mm y-travel 560 mm z-travel 560 mm table surface area 1000 x 600 mm spindle taper HSK 63 A spindle turning speed - stepless 18.000 U/min feeds x/y/z -stepless 0 - 30.000 mm/min Prjdpfxey Tyzus Ah Hja rapid traverse 30 m/min no. of tools in magazin 2 x 12 workpiece diameter at full load 130 mm tool length - max. 315 mm weight of tools max. 8 kg internal coolant system feed 40 bar control HEIDENHAIN control MillPlus iT table load capacity max. 500 kg total power requirement 52 kVA weight of the machine ca. 6,5 t dimensions of machine L x W x H 3,40 x 1,86 x 2,42 m Accessories: probe HEIDENHAIN, TS 640; electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilter

Condition: used, mileage: 152,089 km, power: 390 kW (530.25 HP), first registration: 10/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 02/2027, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,990 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Podpoy U Tgysfx Ah Hjra Internal Number: #637 Mercedes Arocs 3753 8x4 BB Wiedemann Super 1000 11.0/2.2/0.8/1000K Superstructure ? Wiedemann enviro tec ? Super 1000 11.0/2.2/0.8/1000K water recycling ? 14,000 liter tank capacity ? 800 liters of fresh water ? 2,200 liters of rinsing water ? 11,000 liters of sludge volume ? Emptied by tilting the tank 45° Vacuum System ? KW3000 ? approx. 3,000 m³/h ? Water ring pump ? Suction hose reel on the tank ? approx. 25m DN125 ? Hydraulic reel on the left side of the tank ? DN125 Perrot-V remote controlled ? Aerokill system High-Pressure System ? URACA P3-45-65 with approx. 407 l/min at 175 bar ? Hydraulic reel on the boom, suitable for approx. 180m DN32 ? approx. 160m DN32 Parker plastic hose ? Speck NP 25/50-150 with approx. 50 l/min at 100 bar ? Hydraulic reel on the boom, suitable for 80m DN13 ? approx. 80m DN13 ? Spring-loaded reel with approx. 10m DN10 Special Features ? Sludge tank made of stainless steel, electropolished ? Boom arm mounted in the center at the rear ? Telescopic boom ? Working range 180° / 2x90° ? Suction hose and rinsing hose guide ? Soundproofing cladding ? Vice ? Waste container / scrap box ? Hand washing facility ? Advertising panels L+R integrated ? Nozzle display for 8 nozzles ? Ladder ? 2x spring-loaded rollers ? Central lubrication system ? Suction pipe ? IFM CAN control with display ? Reversing camera ? Radio remote control ? Battery charger for remote control ? Halogen light at the rear ? Rotating beacon cab 2x / superstructure 2x Technical Data ? Mercedes-Benz Arocs 3753 ? 8x4 ? EURO VI ? 530 hp / 390 kW ? 2,600 Nm ? Automatic transmission ? Twin-plate clutch ? Outer planetary drive axle AP ? Air horns ? M-cab ClassicSpace 2,300 mm ? Driver and passenger suspension seats ? Navigation ? Hands-free system ? Leaf spring suspension front and rear ? Tires front 385/65 R22.5 ? Tires rear 315/80 R22.5 ? Unladen weight 22,397 kg ? Gross vehicle weight 37,000 kg ? Length 10,730 mm ? Height 3,990 mm ? Width 2,550 mm For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Changes, prior sale and errors excepted. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any warranty.

Condition: used, functionality: fully functional, machine/vehicle number: 11.031.802, Plasma Cutting & Grooving with Hand Torch, from 3 to 45 mm Simple and cost-effective technology for any cutting application The PA-S45 W plasma cutting system is suitable for manual and mechanized cutting in the material thickness range of 3 to 45 mm. By using different plasma gases and gas mixtures, electrically conductive materials can be cut and grooved cleanly. As a mobile system, it can be used in workshops, training centers, and on construction sites. Advantages: Optional use of hand or machine torch Suitable for 2D & 3D guidance systems Robust and simple design Mobile systems for flexible use Reliability even under difficult production conditions Cutting current can be pre-selected in three stages Effective cooling of the plasma torch and its wear parts Quick changeover from cutting to plasma grooving and vice versa Angled torch heads and special shank designs for optimized cutting of 3D parts Wide range of applications thanks to optional equipment Psdpfjy U Uqtjx Ah Hora Liquid-cooled plasma torches The proven design of the torch components, cathode, and nozzle, is a prerequisite for the quality of the cut surfaces. The liquid cooling of the plasma fine-jet torches guarantees their long service life. Plasma cutting with the systems in the PA-S series is therefore efficient and increases the user's productivity. When cutting construction steel with the PA-S45 W, a swirl gas torch often allows for more frequent piercing. Plasma Grooving Both machine and hand torches can be quickly converted for plasma grooving. This requires changing the nozzles and attaching the ceramic cap (if necessary, with a protector). By using different plasma gases and gas mixtures, all electrically conductive materials such as construction steel, stainless steel, aluminum, and brass can be processed. Plasma grooving is ideally suited for removing welding defects, cracks, porosity, and inclusions, as well as for preparing for counter-welding. Advantages: No carbonization of the material No post-grinding required Low heat input Good observation of the process Reduction of noise levels and smoke generation

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: AC, total height: 1,620 mm, total length: 830 mm, total width: 900 mm, overall weight: 110 kg, saw blade diameter: 275 mm, cutting range round steel at 90°: 80 mm, saw drive: 1,500 W, Exhibition machine, like new Year of manufacture: 2022 Podpfjxrz Ikox Ah Hora - Suitable for steel - Two cutting speeds - Reduction gear, low-noise operation in oil bath - Automatic membrane coolant pump with standard coolant filter - Movable safety guard ensures optimum safety during cutting - Control handle with safety switch - Electrical system in low voltage (24 volts), equipped with emergency stop button, main switch, speed selection switch, and overload protection - Machine head rotatable 45° to both sides - Quick-release vice tiltable 45° to both sides - Quick-release vice with double clamping device ensures precise, burr-free cuts - Quality Made in Europe

Condition: used, No. 720: Seldom used pneumatic rotary indexing table, 270 mm, 8 positions No. 721: Machine vice, jaw width 125 mm, clamping width 250 mm, rotatable, 360-degree scale No. 722: Bending roll, 350 mm diameter, throat 50 x 60 mm, bending groove 20 mm diameter No. 723: Mounting plate, 500 mm diameter x 30 mm, flange 230 x 30 mm, second side 120 x 25 mm, mounting holes 6 positions No. 724: Flange 350 x 55 mm, collar 230 x 5 mm, 4 x M16 PCD 275 mm, bore 40 mm, bottom side recess 200 x 15 mm No. 725: Press brake tool, 90 degrees, bending length 250 mm, tool length 550 mm No. 726: Flange 250 x 30 mm, 4 bolts PCD 130 mm, 3 holes PCD 210 mm, bore 102 mm, lower side collar 200 x 5 mm Prsdpfxsyvqc Is Ah Hea No. 727: Festo feed unit BV 100200 with control block, max. belt width 60 mm, max. feed 200 mm No. 109: Electromechanical rotary indexing table, 8 stations, table 850 x 850 x 830 mm, 2 control cabinets Prices on request All dimensions are non-binding; if you require exact measurements, please inquire.

Condition: used, Year of construction: 2000, gebraucht 2000 6253 prompt, Zwischenverkauf v 1900 € 1 Schwenkrahmen 2480 x 0,9 x 27 mm 45 / 90 m/min 225 mm 180 x 245 mm Psdpoynmy Eefx Ah Hera rund 100 mm, 100 x 100 mm rund 160 mm, 160 x 160 mm 935 mm 1.1 kW 1500 mm 700 mm 1400 mm 225 kg Downfeed with damper cylinder and manual valve Coolant equipment Vice with fast clamping lever Roller table 2000 mm with manual gauge 3 pcs. spare bands Operating manual with EC conformity declaration OPTIONS: Further roller tables and band saw blades on request BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Table size 630 x 200 mm X/Y/Z - 250/200/300 mm Spindle speeds 2000 rpm Spindle taper MT 4 Automatic feeding & rapid feeding in all directions Equipped with Prjdpfx Asyaai Roh Hoa Universal inclining table 500 x 200 mm Drilling head w/60 mm movement Rotary table 250 mm Rotary dividing table 250 mm Dividing head Vice 140 mm Collet chuck w/various collets Coolant

Condition: reconditioned (used), Year of construction: 2010, operating hours: 31,600 h, functionality: fully functional, machine/vehicle number: 3078, Travel range Z = 400 mm Y = 200 mm X = 410 mm Power / thrust force Z-Y 2.5 kW / 550 daN (linear motor option = 7.2 kW / 350 daN) X 4.8 kW / > 550 daN X-Y-Z Travel speed 40 m/min (linear motor option = 50 m/min) X-Y-Z-W Acceleration 8 m/s2 / 0.8 g (linear motor option = 10.4 m/s2 / 1.1 g) X-Y-Z-W Resolution 0.0001 mm MAIN SPINDLE + C1 Power 7.5 kW Torque / peak 22 / 28 Nm Measuring system direct Resolution 0.0001° Accuracy 0.001° Bar passage Ø 32 mm Turning spindle speed 72,000°/min Turning clamping force 4,900 N at 6 bar AXIS B (TILT AXIS OF TOOL HOLDER SPINDLE) Power 4.3 kW Torque / peak 119 / 226 Nm Angular travel -25° / +115° Measuring system direct Resolution 0.0001° Accuracy 0.001° Rotational speed 36,000°/min Supporting torque 200 Nm TOOL HOLDER SPINDLE Power 5 kW Torque 6 to 800 min-1 Prsdpfsyf Angox Ah Hea Max. speed 30,000 min-1 Clamping force of the tool holder 2,000 N Blocking torque mechanical blocking via straight-tooth gearing Tool shank taper HSK 40 (A or E) Tool clamping power 1000 daN TOOL CHANGER Number of stations 30 (for HSK 40) CNC control Fanuc 30i/31i type Y-axis (transverse axis) Travel 200 mm Power 4.8 kW Feed power 240 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Z-axis (longitudinal axis) Travel 400 mm Power 7.2 kW Feed power 360 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Includes coolant unit 8 kW and integration of an emergency stop system. Inventory no. 2220114, machine comprising: CONTROL Fanuc 30i/31i, with 14’’ screen LINEAR MOTOR FEED OPTION for Y and Z axes TURNING-MILLING FUNCTION with integration of an indexing system (8 positions) on the tool holder spindle, transformation of the tool magazine for HSK40-A tool holders, increase of the spindle speed to 5500 min-1 4-POSITION PART RECOVERY UNIT “PRM” FOR MACHINING THE 6TH FACE: In idle state, the unit is located protected under the main C1 spindle. The recovery unit moves on the W-axis, which is parallel to the C-axis. Max. speed W-axis: 40 m/min. Travel on W-axis: 310 mm. With 2 vices – power at 5 bar: 3500 N 1 tailstock INCREASED SPINDLE PASSAGE increase from 1 to 50 mm (main spindle) TOOL MEASUREMENT DEVICE “RENISHAW” T27 Measurement of the length of the turning tool. Routine detection by M-code. Automatic tool breakage monitoring. TOOL MAGAZINE EXTENSION Increase in the number of tools from 30 to 60 stations COOLANT THROUGH THE SPINDLE 100 bar, 25 L/min, 400 L tank ADAPTATION AND PREPARATION OF HP THROUGH THE MILLING SPINDLE Mechanical and electrical integration of the turning clutch. PART UNLOADING CONVEYOR Output to the left of the machine PAPER BAND FILTER SYSTEM CLAMPING SYSTEM FOR F-48 CLAMPS ADAPTATION FOR W-20 CLAMPS PREPARATION FOR INTEGRATION OF A BAR FEEDER Subject to errors and omissions, the technical specifications are provided without commitment.

Condition: excellent (used), Year of construction: 2021, total length: 1,200 mm, total width: 800 mm, total height: 250 mm, SCHUNK - KONTEC KSG 100 MACH-ID 9632 Make: SCHUNK Type: KONTEC KSG 100 Year: 2021 Clamping force 4 - 30 kN Weight 19.5 Kg Single stroke vice Clamp width: 100mm Max. opening: 100mm Manuel or hydraulic: Manuel Number of matching vices:4 Length: 1200mm Width: 800mm Height: 250mm Predpfx Ahoy Uvk Ie Hja Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,145 mm, travel distance Y-axis: 615 mm, travel distance Z-axis: 615 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Pinnacle LV116 vertical machining center was manufactured in 2008. It offers robust and precise machining capabilities, ideal for a variety of applications. If you are looking to get high-quality milling capabilities, consider the Pinnacle LV116 machine we have for sale. Contact us for more information. OPTIONAL: Vices and toolsAdditional equipment • Equipment: Automatic tool changer, coolant system with internal cooling Psdpfx Ahex D Rpuj Hera

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780 — As new condition! Technical specifications: >> Machine No. 55249/08, year 2010 >> Fixed angle table >> Spindle speed: 40–2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & features: Psdpjxu Hbhjfx Ah Hera >> 3-axis digital readout Heidenhain ND 780 >> Hydraulic vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the machine: For sale is a Universal Milling Machine Deckel FP1, repowered by FPS, in like-new condition. Included in the scope of delivery are the hydraulic vice with rotary base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Condition: used, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, For sale is a package of four identical Hermle UWF 801 milling machines. Two of the machines have minor defects that require repair, while the other two are fully functional. This package is offered, but individual machines are also available for sale at the regular price. Technical specifications: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle mount ISO: SK40 Spindle head swivels left and right: right/left = 90° Quill stroke vertical: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed: X+Y: 4 - 1600 step mm/min Feed: Z: 4 - 1000 step mm/min Rapid traverse: X+Y: 1.6 m/min and Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Approx. weight: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Tool holders, tools, and vice are not included in the package. However, they can be offered individually. Psdpfxov Tc Apo Ah Hsra Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.