Used Vkm Peeling Machine for sale (64,836)

Condition: used, Year of construction: 2017, Overview This Gruber KombiKEG is a semi-automatic combined keg cleaning and filling machine for kegs and one-way kegs, rated at approximately 30 kegs per hour. Cleaning, sterilisation and filling run as one automatic cycle: interval cleaning of keg wall and down tube with caustic and acid, steam sterilisation, and counter-pressure filling with differential pressure control. The machine was installed in 2017 by BRAUKON and is fed by stainless steel roller conveyors on the infeed and outfeed side. The machine is built entirely in stainless steel and carries one cleaning head, one sterilisation station and one filling head. Filling runs with CO2 or nitrogen. Control is a Siemens SIMATIC PLC with a colour touch panel for settings, temperature and differential pressure control, error messages and counters. It is still installed, connected and in production, and can be visited in operation on request. Technical data - Manufacturer: Gruber (Alfred Gruber GmbH, Austria) - Model: KombiKEG - Year of manufacture: 2017 - Machine type: semi-automatic combined keg washer and filler, one cleaning head / one sterilisation station / one filling head - Capacity: approx. 30 kegs/hour - Kegs: stainless steel kegs with "A" type head and one-way kegs, all common fitting systems - Functions: interval cleaning (caustic and acid), steam sterilisation, automatic filling - Filling gas: CO2 or nitrogen - Control: Siemens SIMATIC PLC, colour touch panel HMI - Detergent tank: 175 l, insulated, integrated, with steam heating coil, control valve and steam trap - Pump: 1.1 kW with electronic dry-run protection - Construction: stainless steel 1.4301, stainless steel switch cabinet, no electrical components in the wet area - Pneumatics: Festo multipole valve block, pneumatic piston valves - Dimensions: approx. 140 x 126 x H 230 cm (machine without conveyors) - Installed footprint: approx. 449 x 98 cm including the infeed and outfeed roller conveyors - Power supply: 7.5 kW max. - Air supply: 2-3 bar, approx. 0.35 m³ per keg - Steam supply: 3-4 bar Tsdszxt Atopfx Anteb Equipment - Stainless steel roller conveyors, infeed and outfeed - Steam generator - Two vent valves for fast and complete filling - Pressure switch flow line monitoring and electronic return line probe - Keg valve open control, work tables with keg stop logs - Front panel to switch between filling and CIP cleaning - Technical documentation, conformity certificate and machine layout drawing - Spare parts Condition Used, in production and still installed under power. Approximately 3,000 operating hours, around 90,000 kegs filled and 75,000 kegs cleaned. Last production April 2026, last maintenance January 2026. The machine is clean, maintained and ready to produce. It is being replaced by a higher capacity machine. Availability Immediately available. Location: France. Dismantling, handling and truck loading are included by the seller (EXW loaded).

Year of construction: 1982, condition: used, Throughput: 2000-4000bottles/h, number of rows: 12, the machine is steam-heated and fully functional, an on-site inspection is possible. Tsdpfozxr Nxsx Antjb

Year of construction: 2005, condition: used, X-axis: 500mm, Y-axis: 450mm, Z-axis: 400mm, swivel rotary table dimensions: 630x500mm, max. table load: 200kg, swivel range: -5 to 110°, continuously variable speed: 20-10,000/min, drive power (100%/40% duty cycle): 9kW/13kW, torque (40% duty cycle): 82Nm, input resolution: 0.01mm, positioning tolerance: 0.010mm, rapid traverse: 24m/min, feed speed: 20m/min, number of SK40 tool positions (DIN 69871): 30, tool diameter (speed-dependent): D80-D130, max. tool length: 290mm, max. tool weight: 6kg, connected load: 17kW, control: Siemens 840D Powerline ShopMill, length: 4860mm, width: 4350mm, height: 2424mm, transport dimensions: 2210x2120x2150mm, weight: 4.05t, operating hours power-on time: 35,880h, spindle hours: 9609h. Equipment: digital drive and hydraulic clamping (positioning operation only), electronic angle display and plane transformation, chain magazine with double gripper, additional cabin door on the right, 80l coolant system, coolant/compressed-air switching, flushing gun, oil pan drawing, MDE interface (machine on, machine running, piece counter), documentation in German, 3D machine model for kinematic simulation in the CAM programming system (IGES, STEP format), numerous SK40 tool holders (DIN 69871), Heidenhain TS641 infrared touch probe, electronic handwheel, additional V24 RS232 interface on the control cabinet. An on-site inspection is possible. Tedpfxjzxr Rcj Antob

Condition: not inspected (used), Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Tjdpfx Asv N N Spsntjb Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information.

Condition: used, *VILAR LASSEUR VL 315 GRINDER - 1992 - Carbide Tool Sharpening* French VILAR Chatellerault grinder, Type *VL 315* - No. *315.256* - Date: *06/29/92* *Complete equipment:* - Cross table with carriage + swivel table for workpieces - Universal, inclinable tool holder - Long arm for lathe tool holder / carriage tool - Diamond grinding wheel, housing, coolant system - Remote control box, emergency stop button - Articulated lighting lamp - Original green Vilar sheet metal base Tsdpezxt Hfefx Antjb 400V - In working condition, from a precision engineering workshop On a pallet - Approx. 350 kg - Easy to transport Video available upon request.

Condition: used, Year of construction: 1989, Format: 350 x 500 mm Tsdpeyzrucjfx Antjb

Condition: used, Format: 0x0 Equipment: 2 spindles Tsdpfx Anoy Dudxotsb

Condition: used, Year of construction: 2004, sheet width 1550 mm Tjdpfxszxt Txj Antjb plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri

Condition: used, Year of construction: 2007, x-travel 1.000 mm y-travel 510 mm z-travel 500 mm Control FANUC Series 18 i-MB spindle tunring speed 60 - 10.000 U/min power capacity 11 kW tool taper SK 30 number of tool places 21 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery Tjdpszxt S Uefx Antob only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2011, Automatic labeling machine for glass bottles Manufacturer/Model: Makro MAK-1 4P Ua2 L2 Version with 2 self-adhesive labeling units MAK-A50 Suitable for front label and back label Output: up to approx. 3,000–3,500 bottles/hour Container diameter: 40–130 mm, container height: 140–380 mm Label length: 10–195 mm, label height: 10–180 mm Stainless steel version AISI 304, safety enclosure in accordance with CE PLC control with touch-screen display Automatic speed regulation and electric head height adjustment Optical orientation via sensors, plate rotation via stepper motors Installed power: approx. 4 kW Tsdpezxu A Uofx Antob Technical data: working direction: left-right, clockwise capacity bph max.: 4500 labels: self adhesive labels number of labelling stations: 2 number of bottle plates: 4 orientation: bottle plate with stepper motor, optical orientation using a photocell bottle diamater max (mm): 130 bottle diamater min (mm): 40 bottle height max (mm): 380 bottle height min (mm): 140 motor height adjustment: yes speed adjusment: frequence converter

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5300 mmVertical traverse Y: 1050 mmTransversal traverse Z: 1500 mmVertical capacity (VC): 80 - 1130 Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approximate: 43000 kgMachine dimensions approximate: 11560 x 6150 x 3538 mm Accessories Guarding: 2 front sliding doorsAutomatic tool changer: ATC40Chip conveyor: 2 longitudinals hinge typeElectronic handwheel: HR-410Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Tjdpfsugbrqjx Antob

Condition: used, Year of construction: 1994, The Mathias Baeuerle CAS 524 SE, manufactured in 1994, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 520 x 720 mm and is currently located in Germany, available in storage. Format: 520 x 720 mm Todpev Di Srsfx Antsb Equipment: 4 buckle plates vertical pile feeder 1 Knife

Condition: used, Year of construction: 2001, The Mathias Baeuerle CAS 52-B is a sophisticated and efficient folding machine designed for precise and automated folding tasks. Manufactured in 2001, this machine is currently in stock and located in Germany. It features four plates in the first unit and automatic fold plate setting, ensuring accurate and consistent folding. The CAS 52-B is equipped with automatic paper thickness measurement, a control panel with seven pre-programmed standard folds, and electrical double-sheet control to prevent errors. It includes a flat pile feeder for smooth material handling and a MB CAS 52 Multimaster computer-controlled folder, which allows for precise and repeatable folding operations. With a memory capacity for 60 repetitive jobs, the machine can efficiently handle high-volume tasks. The CAS 52-B also features semi-automatic fold roller setting and mobile delivery, enhancing its versatility and ease of use. It can accommodate materials with a size of 520 x 850 mm. Format: 520 x 850 mm Todpfewdww Ujx Antsb Equipment: 4 Plates 1st Unit Automatic Fold Plate Setting Automatic Paper Thickness Measurement Control Panel 7 Pre-programmed Standard Folds Electrical double-sheet- control Flat pile feeder MB CAS 52 Multimaster Computer Controlled Folder Memory for 60 Repetitive Jobs Mobile delivery Semi Automatic Fold Roller Setting

Condition: used, Year of construction: 2006, The Heidelberg Stahlfolder Ti 40/4-SAK is a compact and efficient folding machine designed for small to medium-sized print shops. It has 4 pockets and an SAK stream delivery system Format: 400 x 650 mm Equipment: Feeder Feeder Mode: Flat pile feeder Type: FI-40 Control Unit: DCT 500 Folding Units Todpfowcqxvsx Antob 1st unit Type: Ti-40 Year: 2004 Pockets: 4 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Noise Protection Hood Serial number: FH.FANF-00226 Delivery Delivery mode: Shingle delivery Technical Details Sheet size max: 400 x 650 mm Sheet size min: 80 x 100 mm Max. mechanical speed: 180 m/min.

Condition: like new (used), Year of construction: 2000, functionality: fully functional, Dowel and slot drilling machine GANNER GANNOMAT JUNIOR 323 in very good condition, the machine is in absolute new condition; it comes from a very small carpentry shop and only has some paint damage, as it has not been used for about 18 years. With this machine, you can mill slots and drill dowel holes on 2 levels without re-clamping. 380V, 1500W 2800 rpm Year of manufacture 2000 With this machine, you can mill slots for, for example, lock boxes and similar items, or produce all types of frame dowel connections at right angles, flush, and mitered. Ideal for the production of dowel connections in timber frame construction, furniture, door, window, and stair construction, and for similar applications. Drilling on 2 levels, the grid and stops, and the design of the machine allow dowel connections to be produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. With 2 angle stops (one center stop and one side stop that can be used on both sides). At the front of the machine table, there is a 2000 mm long stop rail with 2 folding stops; the stop rail can be shortened or extended if required. The workpiece is clamped using 2 pneumatic clamping cylinders. The height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures a quick adjustment of grids and the drilling levels. The heights of the individual drilling levels can be read on 2 mechanical dials; adjustment screws are located above the dials, which can be used to adjust the drilling heights. With a precision 12 mm grid rail, which has a center grid and 12 grids on the left and right. Can be quickly converted for slot milling; the machine can then be used without a grid with 2 adjustable stops on the left and right and then has a working width of max. 420 mm. The max. drilling hole height is 100 mm. The max. drilling hole depth is 150 mm with stop and scale. The max. workpiece height is 160 mm. Everything is in perfect working order. We will personally deliver and demonstrate the machine throughout Germany for 220.00 euros, which means you have no risk when purchasing; delivery to Austria and the EU is also possible upon request. The machine table is 870 mm wide, 140 mm deep on the sides, and 350 mm deep in the center. Professional equipment, not cheap hardware store junk. You can start working with the machine immediately. Tsdpfxjzxuiuo Antsb With 2 chucks up to 20 mm. Very stable and durable design. The precision guides with the play-free ball bearing bushes are OK and move smoothly.

Condition: used, Format: 320 x 450 mm Equipment: Friction collator 10 Stations DFC Series collators use three prependicular rubber feed wheels to feed sheets into the machine. This ensures collators can grip the entire leading edge of the sheet to guarantee feeding of all sheet from A5 to A3 feed systems - 3 friction feed wheels Capacity per station - 28 mm (260 mm sheets at 80 g/qm2) Min sheet size - 140 x 140 mm Max sheet size - 320 x 450 mm Paper weight - 50-130 g/qm2 Todpfxsx Hzx Io Antob Speed ??(games/hour) - 3900 games/hour 220 volts-mono

Condition: used, Format: 360 cm Todpfxsyf Ih Ss Antjb Equipment: Automatic cutting, slotting, and creasing

Condition: used, Format: 310 x 432mm Equipment: Tsdpfxex N I Uhe Anteb roller adjustment: fully automatic model: flat pile feeder with air-suction type of fold: single fold, parallel fold, short fold, letter fold, according fold, gate fold sheet size: max. 310x432mm; min. 125x130mm paper weight: 50-190g/sqm pile height: 50mm speed: max. 240 sheets/min. power: 230V/50Hz - 0,6kW dimensions: 1.060x553x670mm weight: 45kg

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length 670 mm Max. grinding width 280 mm Max. grinding height 400 mm Table speed, longitudinal 2 – 35 m/min Table speed, transverse 0.3 – 40 mm/stroke Tsdpsf Um Rasfx Anteb Rapid traverse yes Grinding wheel dimensions 300 / 76 x 40 mm Drive power 4 kW Machine dimensions L x W x H 2000 x 1850 x 2000 mm Machine weight 2300 kg Hydraulic and electrical system dimensions L x W x H 1200 x 800 x 2000 mm Hydraulic and electrical system weight 650 kg Accessories / Special features: • Permanent magnet clamping plate 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine alignment elements Note: o Hydraulic cylinder for table stroke newly sealed o New filters in the hydraulic unit o Handwheel adjustment for transverse stroke newly mounted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 700 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 8,000 kg, table length: 1,150 mm, table width: 550 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 32,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, spindle nose: SK 40 BIG PLUS, spindle speed (max.): 12,000 rpm, table load: 700 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 1050 Machining Center – immediately available The LAGUN L 1050 machining center stands for high precision, robust design, and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease-purchase possible ✔ Compact design with high stability Tjdoh Ekq Dopfx Antob ✔ 24 months warranty Technical features: Control system: ✔ HEIDENHAIN TNC 7 Basic ✔ HEIDENHAIN TFT screen 16" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal hinged belt chip conveyor ✔ Preparation for the integration of a rotary table ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will gladly advise you and prepare an individual offer for you.

Year of construction: 2011, condition: excellent (used), Expro BSJJ-600T Tempura machine Serial: L041101C Todpsick S Tjfx Antob 2011, stainless, designed for coating products with liquid batter, ideal for products such as chicken nuggets, hamburger, schnitzel and more, variable speed, with blower for blowing surplus batter, overall length 4100mm, stainless mesh belt width 600mm, mobile, 3Ph

Year of construction: 2001, condition: ready for operation (used), Horizontal Machining Centre with boring spindle Giddings & Lewis type HMC 410 Pallet size: 1.250 x 1.600 mm Pallet load: 7.000 kg max. Pallet change time: 55 sec. Number of pallets 2 pcs Table indexing: B-Axis 0.001° Table cross travel (X) 3.000 mm Spindle vertical travel (Y) 2.100 mm Column longitudinal travel: Z 1.800 mm Feed: X/Y/Z 1 – 40.000 mm/min. Rapid: X/Y/Z 40 m/min Rotary table 6 rpm Max rotary diameter: Ø2.500 mm Spindle taper: ISO 50 Spindle drive motor: 30 KW Spindle speed: 20 – 5.000 rpm ATC 120 pots CNC controller: Siemens Sinumerik 840D Max workpiece height: 2.000 mm Accessories Hexagon radio measuring probe Loading stations 2 PCS Build year 2001 Tsdpfx Ajguk Icontsb (Siehe auch weitere Angebote des Inserenten.)

Condition: new, Year of construction: 2025, BODOR laser cutting machines – top quality at top prices. -Easy programming – with service and training, installation, and commissioning. Tsdefbg Hbopfx Antjb -Machines with power outputs from 3 kW to 30 kW. Easy to operate and suitable for both beginners and established companies.

Condition: new, Year of construction: 2024, functionality: fully functional, Stationary universal stable machine platform, made of folded steel profiles for industrial use. Todpfx Ansupy Hysteb industrial use. It has an oil drip tray and can be moved with a standard pallet truck. The platform therefore offers a wide range of possible uses. Anti-slip steps have been installed to ensure that the platform can be walked on and off safely. To achieve a comfortable working height, our platforms are available with different standing heights. The height can also be finely adjusted using the adjustable feet. Available standing heights without banisters: - Standing height 480mm - Standing height 570mm The platform has a dimension of 101x93cm As standard, the platform comes in the color RAL 7015 with a coarse structure. However, various RAL colors are available on request. For any special requests, please contact us by e-mail with your request. Depending on the application, the work platform can be adapted to your needs using our various storage modules. The storage modules are available from us separately so that you can put together your own platform. Note: Some of the pictures contain special accessories that are available separately from us (e.g. the shelves)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, feed rate Z-axis: 7 m/min, total length: 11,000 mm, table length: 4,500 mm, table width: 1,250 mm, total width: 4,170 mm, spindle speed (max.): 3,000 rpm, total height: 4,645 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 12 m/min, distance between stands: 2,040 mm, type of input current: three-phase, table load: 1,000 kg, position of the milling head: Universal automático, indexable cada 2,5°, workpiece weight (max.): 10,000 kg, rotational speed (max.): 5,000 rpm, overall weight: 30,500 kg, spindle motor power: 3,000 W, Equipment: rotational speed infinitely variable, Gantry milling machine, Nicolás Correa FP-40/40S, built in 2000 and retrofitted in 2016. Fitted with a Heidenhain TNC-426 CNC control and a Heidenhain HR-410 portable handwheel. Working table measuring 4,500 × 1,250 mm with eight 22 mm T-slots. Maximum permissible table load of 10,000 kg. Axis travels of 4,000 mm in X, 2,500 mm in Y and 1,000 mm in Z. Distance between columns of 2,040 mm. Automatic UAG universal milling head with 2.5° indexing steps and hydraulic tool clamping, ISO 50 spindle taper to DIN 69871. Spindle rated at 30 kW, reaching 5,000 rpm. Cutting feed from 2 to 7,500 mm/min; rapid traverse of 15,000 mm/min on the X and Y axes and 12,000 mm/min on the Z axis. Automatic tool changer with 30 stations. Renishaw tool measuring probe installed, plus provision for a Renishaw workpiece touch probe. Two chip conveyors. External coolant system together with internal coolant supply through the milling head. Enclosed splash guarding, CE marked. Machine weight 30,500 kg. Overall dimensions 10,975 × 4,170 × 4,645 mm. Tsdpfx Anoul S Syotob