Used Waco Swedish Made Cutting Line for sale (28,686)

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Dwsdpfx Akez D S Sbjmec Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Technical Data: CNC Control: BYSTRONIC BySoft Laser Type: CO2 Working Area: 3000 x 1500 mm Travel Range X-Axis: 1562 mm Travel Range Y-Axis: 772 mm Travel Range Z-Axis: 100 mm Bylaser Power: 2.2 kW Wavelength: 10.6 µm Rapid Traverse X/Y/Z: 100 m/min Cutting Capacity Steel: 8 mm Cutting Capacity Stainless Steel: 6 mm Cutting Capacity Aluminum: 4 mm Fume Extraction System with Water Cooling: EF WKL 300-F CE Marking Dimensions (Length x Width x Height): approx. 13500 x 2500 x 2500 mm Weight: approx. 13.5 tons Dsdpfxez E Axus Akmewc Condition: Very good condition Only 6,500 operating hours The machine comes from a vocational school, not from a production facility The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, mileage: 20 km, power: 129 kW (175.39 HP), first registration: 05/2026, fuel type: diesel, fuel: diesel, brakes: retarder, color: other, gearing type: automatic, emission class: euro6, number of seats: 24, total length: 7,700 mm, total height: 3,100 mm, Year of construction: 2026, Equipment: ABS, USB port, air conditioning, retarder, = Additional options and accessories = - Air conditioning (driver) - Air conditioning - Webasto heater = Further information = Damage: none = Company information = Dwodpfx Aksy N Ud Ajmjc We are an international company based in Belgium, near Brussels (approx. 20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and offers an extensive parking area serving as a showroom. We always have numerous buses of all brands, capacities, models, and in every price range in stock. We can find the right coach, school bus, or city bus tailored to your needs and budget. All information is provided without guarantee. Errors, prior sale, and typographical errors reserved. Viewing hours for used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: good (used), Compact coating line - batter dip, pre dust, batter enrober, crumber - all 400mm in to 350mm wide fryer. Has come from a small factory which was set up in 2020 and closed this week 25th March 2026. The factory was producing small products like pasta and chillies filled with cream cheese which was then coated and fried. Video to be added shortly. All other machinery also available including Vemag multi head filler and several blast freezers. Dwsdsyxfmyspfx Akmsc

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: A-260606, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 77 mm, overall weight: 300 kg, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 2 A, cutting height (max.): 100 mm, Object A260606 Refurbished Gingerbread/Cake Slicing Machine Fully refurbished gingerbread slicing machine with a cutting thickness of 77 mm. All electrical switching equipment and pneumatic components have been replaced in accordance with the latest state of current technology. By equipping the machine with two-hand operation, it has been made very safe to operate. Machine Information: Overall machine length: 1.6 meters Overall machine width: 1.25 meters Overall machine height: 1.3 meters Machine working height: 0.9 meters Distance between knives: 77 mm Machine Capacity: 240 wide slices of bread per hour Electrical Information Power supply: 400 V, N+PE Power consumption: 1.0 kW Dwedpjz Erybjfx Akmec Plug type: CEE-form, 5-pin, 16 A (round red plug) Compressed air required?: Yes Minimum and Maximum Product Dimensions Product length: 100–500 mm Product width: 80–755 mm Product height: 40–100 mm Machine Description This cookie slicing machine has been completely refurbished. The machine was fully disassembled, thoroughly cleaned by blasting, and coated with a durable two-component finish. It was then completely rebuilt. The machine is equipped with new bearings, a new drive motor, new pneumatic components, and a renewed and improved electrical system based on the latest technology. The machine is mounted on wheels. The speed of the product pusher is adjustable, allowing it to be adapted to the type of product being processed. This machine is in like-new condition! The machine is suitable for slicing breakfast cake (gingerbread-style cake) and/or currant bread. The machine is equipped with two swivel castors with brakes and two fixed castors. Warranty: 3 months (excluding knives)

Condition: used, functionality: limited functionality, machine/vehicle number: A-260605, input voltage: 400 V, overall weight: 500 kg, type of input current: three-phase, total length: 1,750 mm, total width: 1,300 mm, total height: 1,600 mm, control voltage: 24 V, input frequency: 50 Hz, input current: 4 A, Equipment: compressor, Object A260605 Sinmag CT808 Cake Cutting Machine Semi-automatic cake cutting machine with 10 different cutting programs, designed exclusively for round cakes with a maximum diameter of 300–335 mm and a maximum height of 100 mm. Machine Specifications Total machine depth: 1.75 m Total machine width: 1.30 m Total machine height: 1.60 m Djdpjz Eui Sjfx Akmewc Working height: 1.00 m Maximum cake diameter: 300–335 mm Maximum cake height: 100 mm Machine Capacity: Capacity is entirely dependent on the number of portions/slices to be cut. Electrical Information Power supply: 230 V, N + PE Power consumption: 1.0–1.15 kW Plug type: 2 × standard household plugs Compressed air required: Yes Minimum and Maximum Product Dimensions Product diameter: 100 to 335 mm Product height: 20 to 100 mm Operating Description – Sinmag CT808 Cake Cutter The Sinmag CT808 is a semi-automatic cake cutting machine designed for accurately dividing round cakes and pastry products into equal portions. The machine is controlled via a Siemens PLC control system with a touchscreen interface, allowing various cutting programs to be selected and adjusted. All settings are controlled through a Siemens touchscreen display, which also supports multiple language options. The machine is clad with polished chrome-finished stainless steel panels, providing a high-gloss appearance, and is mounted on four swivel castors with brakes for easy movement and secure positioning.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Dwodpsy Nl U Sofx Akmec

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode Dwsdpjzqnxtsfx Akmjc - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: used, functionality: fully functional, Greif-Velox Packaging Solution Bag Filling Line 25kg bags capacity 250-350 bags/h throughput comprising Greif-Velox velomag feeding machine Greif-Velox velofill automatic bag filler/sealer machine serves to store, cingulate, and feed pre-made bags 400mm x 600mm and 500mm to 900mm in length Greif-Velox belt conveyors Control panels and additional infrastructure Djdpjz Hdg Nsfx Akmjwc

Condition: as good as new (ex-display), Year of construction: 2022, 450 Automatic Die Cut and Turret Rewinder 450mm Rotary Die Cutting unit: -Unwinder with auto web guider -Auto Tension Control system -Pressure meters for die cutting unit -Standard slitting unit with 6sets blades -Standard matrix removing system -Magnetic Powder system,mechanical speed 100meters/min -Max unwinding diameter 700mm, web width 330mm -Standard connection component to 330 turret rewinder 450 Auto Turret rewinder: -Automatic paper core bowl feeder -Automatic tail glue unit -Automatic paper core conveyor -Pressing paper swing arm -Automatic cut unit -Automatic finished roll ejection -Automatic brush press paper unit -Automatic core glue unit -Air expanding shaft 4sets each sizes 1’’, 1.5’’ and 3’’ -Labeling System (optional): Included Features: Speed: 60-100 m/min Max. Rewinding Diameter: 350mm Max. Web Width: 450mm Min. Rewinding Width: 40mm Total Power: 8KW Power Supply: 3PH+N+PE Air Source: 0.8MPa (As 40*30 products, 25m a small roll calculation: 3000m raw materials, average 30 minutes a roll of raw material. Every 25m a small roll and rewinding 6 rolls at the same time. 720 rolls can be produced in 10 minutes) Machine in stock in our showroom Dsdpeh Uctvjfx Akmjwc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: MAX Photronic, laser source model: MFSC-6000, laser power: 6,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,300 mm, feed rate Y-axis: 110 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, overall weight: 4,800 kg, total length: 9,250 mm, total width: 2,635 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, Fiber laser tube cutting machine Dwsdjywxl Tepfx Akmec TH6020 – Fully equipped - Working range – tubes: 15x15/230x230mm & D15/D230mm - 6 kW MAX Photonics laser - Water chiller - Fume extraction unit - Automatic O2/N2 pressure regulation - Automatic focusing head - YASKAWA servo motors - Complete operator safety enclosure - CE conformity

Year of construction: 2012, condition: ready for operation (used), MFK DR 426 Edge milling cutter, deburring tool, chamfering tool Compressed air connection: 6 - 10 bar Turning rest diameter: max. 3 mm steel Shearing force: at 8 bar, 450 kp Dimensions: 330 mm x 300 mm x 320 mm (L x W x H) Weight: approx. 20 kg You are welcome to visit us for a demonstration. We can also arrange cost-effective shipping for you! Dwjdpfx Akez E U Tqomsc You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2010, Rademaker industrial powdered sugar duster with stainless steel conveyor, suitable for the automatic and even application of powdered/icing sugar onto bakery products. The machine is manufactured entirely in stainless steel and is equipped with an integrated wire-mesh conveyor and an independently driven spreading/brush system. The conveyor belt and spreading unit can be controlled separately. The machine can be used as a stand-alone unit or integrated into an existing bakery production line. Serial number: 7498-703 Year of build 2010 Stainless steel construction Dwedpfx Akoz Ha N Hjmsc Integrated stainless steel wire-mesh conveyor Driven spreading/brush system Separate controls for conveyor and spreading brush Frequency-controlled drive Electrical control cabinets Mobile stainless steel frame Voltage: 230 V Connection: 1 Phase + N + PE Frequency: 50 Hz Current: 3 A Weight: 175 kg CE marked

Condition: good (used), Year of construction: 2008, functionality: fully functional, KALTENBACH KDE 603 – CNC Drilling Line- Year 2008 3 spindles. Manual tool change. 12.5 Metres infeed. 12.5 Metres outfeed. Dodpfx Ajz Hd Tpjkmjwc Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT Dsdpfxezg Epus Akmewc • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, Year of construction: 2016, functionality: fully functional, Conveyor line / roller conveyor system / material handling system, material handling equipment, approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Conveyor line Condition: Used Year of manufacture: 2016 The system consists of: 1 x Inclined belt conveyor, approx. 3.2 meters long 2 x Pneumatic lifts 3 x 90° bends 2 x Folding elements / passage elements 1 x Control cabinet 25 pcs adjustable feet and the remaining conveyor belt / roller conveyor, approx. 34 meters Total length: approx. 50,000 mm Total width: 750 mm Conveyor width: approx. 680 mm Roller diameter: 50 mm Dodpfox Ala Eex Akmswc Internal article number: 2025120101 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The material handling equipment was in operation until disassembly. Thanks to the excellent workmanship of the material handling equipment, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: Dwedpfx Aksy Urziomsc – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Condition: new, Year of construction: 2026, TRV 1700: High-Performance Optimizing Saw for Finger Joint and Moulders The TRV 1700 is the ultimate solution for woodworking professionals, offering precision, speed, and advanced optimization. Designed in three different configurations with Ø 500, 550, and 600 mm blades, this optimizing saw is available in the following versions: TRV 1700A – Automatic with programmed cutting TRV 1700E – EB – Optimized cutting to maximize yield and reduce waste TRV 1700S – Simple cutting on mark for essential operations Thanks to its high versatility, the TRV 1700 is perfect for quickly removing knots and defects from wooden boards. It is the ideal machine for applications where maximum length is a priority, such as parquet flooring, or when only defect selection is required. Advanced Optimization Software Over 100 cutting plans, customizable by width and quality Smart optimization algorithm for: Commercial value Waste reduction Quantity Length Mixed optimization Pre-cut simulation for maximum efficiency Real-time monitoring of processed quantities Integrated optimization within the saw, simplifying the workflow Machine Structure & Technical Features Reliable conveyor belt traction system without adhesive parts Non-slip rubberized pressure wheels, suitable for all materials Thick pressor for safe clamping of chips and irregularities PLC-controlled silent blowers for continuous workspace cleaning The TRV 1700 integrates seamlessly with moulders and finger jointers via Cursal’s feeding systems, ensuring a smooth and efficient in-line production process. With a wide range of customizable accessories (see the dedicated section), it can be upgraded from a standard version to a fully equipped high-end configuration. Recommended Applications Parquet flooring – Ideal Windows and construction – High compatibility Dwedev Iqbpspfx Akmsc Furniture components – Well-suited Laminated beams, planks, structures – Well-suited Finger joint recovery – Ideal Choose the TRV 1700 for optimized cuts, reduced waste, and maximum production efficiency.

Condition: used, EFCO Glass Tempering System 750 °C Thermal glass tempering system for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering system from the renowned British manufacturer EFCO Furnaces Ltd. The system is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System Components & Structure Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the enclosed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air (“quenched”) to create the necessary surface tension. Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main control cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer (Glass Tempering System) Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Connection voltage: 380 volts Number of phases: 3 phases Mains frequency: 50 Hz Reference number: 427206 Year of manufacture: 2001 Conformity marking: CE certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m Complete set of spare ceramic rollers: A full, unused/new set of high-quality transport rollers (Fused Silica Rollers) with a new value of over €10,000 for the oven area. Item location: 32278 Kirchlengern Dismantling until the end of October Dismantling & transport: Option 1: The dismantling, loading, and transport will be completely organized and carried out by the buyer (collection from the location). Option 2: Dismantling service by us: Alternatively, we offer to have our team professionally dismantle the complete system. Surcharge: €5,000 net "All from one source: We would be happy to offer you suitable bank financing for your project." Dwsdoz Hm Ipopfx Akmsc More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design Dwjdpfoz Hcr Djx Akmoc - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Minimum workpiece length: 250 mm Units: 2 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg Dwodpfxsupy Spj Akmec

Year of construction: 2003, condition: reconditioned (used), longitudinal saw for cutting boards 4 meters main engine 400V, 7.5kW - blade feed motor 400V, 2.2 kW - extending the pneumatic saw - working pressure 6bar - cutting length 4020 mm - cutting height approx. 170mm - machine length 5.5 m - machine width 1.6 m Dsdohbp T Sspfx Akmjwc

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Dwjdecudizopfx Akmoc Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Condition: used, Year of construction: 2008, Crowning CNC controlled Bending length 4250 mm 5-axis backgauge Work area lighting Parking position 900 mm Hydraulic lower tool clamping Hydraulic upper tool clamping CNC lower tool displacement Installation height 615 mm ACB preparation Dedpfeyvr Ewsx Akmewc

Condition: used, Pfaudler glass lined vertical reactor manufactured by Pfaudler, model BE6300. Volume: Total approximate capacity: 8190 L Technical features: Model: BE6300 Vessel working pressure: -1/+6 bar Vessel working temperature: -25/+120 ºC Half-coil/jacket working pressure: -1/+6 bar Dsdeyxd D Rspfx Akmjwc Half-coil/jacket working temperature: -25/+120 ºC Half-coil/jacket volume: 796 L Equipment configuration: -Agitator -Half-coil Specifications: Capacity: 8,190 L Internal Pressure: 6 bar Internal Temperature: 120°C Jacket Pressure: 6 bar Jacket Temperature: 120°C