Used Weingarten Np 80 (Uvv) for sale (19,312)

Condition: used, Year of construction: 2024, left + right, tarpaulin can be rolled from left to right, aluminum tube, service platform 2 / pcs. belt ratchets left, center frame, total height 325 560/60R22.5 side / dropside only possible in pendulum mode 40 km/h COC EU with 1 lifting cyl. with / 2-wire DL brake with A Iedpot R R S Aefx Anwjth

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Dropside height: 800mm Extension dropside height: 800mm / Itsdpst Ty Irefx Anwsh

Condition: used, Year of construction: 1962, nominal force 400 t stroke 140 - 400 mm no. of strokes 24 - 36 /min Itjdpfsvuud Usx Anwsh distance between columns 800 / 700 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 700 x 700 mm ram surface 630 x 630 mm spindle diameter 220 mm power capacity 26,0 kW weight 18,5 t Dimensions (WxDxH) 1,85 x 2,5 x 4,3 m only permitted for warm forming work with gear drive, single impact / double impact device, impact regulation

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analogue control panel and temperature control via a digital thermostat Optional functions can be added to the PRO series. We have volumes from 60 to 7,500 L to meet all requirements. Tank capacity: 110L Außenmasse:1970x670x970mm Useful dimensions grate:550x350x250mm Iodef Hqavjpfx Anwoth Ultrasonic frequency: 40kHz Ultrasonic power:1000W

Condition: defective spare-parts repository (used), Year of construction: 1974, machine/vehicle number: 121645, functionality: not functional, pressing force: 63 t, table width: 650 mm, table height: 910 mm, overall weight: 4,000 kg, space requirement height: 2,800 mm, space requirement length: 1,200 mm, space requirement width: 1,900 mm, stroke adjustment: 63 mm, The eccentric press has a clutch defect and is currently non-operational. Without the column stand mounted in the pictures. Itodex D Tngepfx Anwoh

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. Itedpfjt Hwz Nox Anweh * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m Itsdpfx Anecubatjweh - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Year of construction: 1971, condition: used, pressure 160 t throat 440 mm stroke 20 - 120 mm table surface area 1050 x 750 mm Isdpjcyc Adofx Anwoth no. of strokes 42 u. 62 Hub/min ram surface 800 x 500 mm tool shank hole (depth x diameter) 85 x 50 mm hole in the table 355 mm daylight (stroke down, ram adjustment above) 455 mm ram adjustment 100 mm weight of the machine ca. 11,2 t

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, pressing force: 80 t, stroke length: 290 mm, operating speed: 90 mm/s, table height: 950 mm, throat depth: 1,000 mm, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, overall weight: 6,800 kg, controller manufacturer: Safan, controller model: TS1, working width: 2,550 mm, bending force (max.): 80 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, warranty duration: 3 months, control type: CNC control, actuation type: electric, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Itedpfxout S E No Anweh Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: new, NEW CAR Power Control Numerical Control with NX Cut System Software and NX Pareto optimizer Barcode labeler with software Cutting length mm 3800 Cutting width mm 3800 Blade protrusion mm 90 Front panel loading and unloading Automatic lateral aligner positioned in the blade carriage N° 1 fixed front table in bakelite with air curtain system for unloading the panels N° 2 mobile front tables in bakelite with air curtain system for unloading the panels Main blade, max diameter 380 mm, 15 kW motor Itedpfx Aorufznenweh Scoring blade, max diameter 200 mm Blade carriage speed forward 1 - 90 m/min. - backward 120 m/min. Pusher speed 85 m/min. Pusher carriage with 9 pincers

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey • Material: metal • External dimensions: 124 x 83.5 x 97 cm • Load capacity: 1000 kg • Stack load: 5000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal floor with wooden insert 💰 Price €99 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: by appointment at any time Itedovb T Ewopfx Anwoh Over 5000 linear metres of pallet racking from numerous manufacturers constantly in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. Ijdpot Ucpbefx Anwoth The machines are for sale as a single unit and individually. Inquire by phone or email!

Condition: used, machine/vehicle number: 315/80 R 22.5, first registration: 11/2000, color: other, Year of construction: 2000, USED TRUCK TIRES. ON 10 HOLES RIM. Itodpfxexwlazs Anwoh

Condition: used, machine/vehicle number: 275/80 R 22.5, first registration: 11/2005, color: other, Year of construction: 2005, USED TRAILER TIRES 275/80 R 22.5 FOR SINGLE MOUNTING. Itjdpfx Asxwlabonwoh

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Still EFG 1.5/5004 -Hydraulic pump: Type Motor: Type GP -14/5.5 80 V 2.0 kW -Dimensions: 345/140/140 mm -Weight: 15.7 kg Itedpfx Anjzfhxvoweh

Condition: used, Year of construction: 2013, fuel type: diesel, Mast: articulated arm Lifting capacity: 227 kg Iedpfx Aezflnzenweth Please contact Gebrauchtgeräte Center for more information

Condition: good (used), Year of construction: 2016, lifting height: 14,150 mm, fuel type: diesel, General information Mileage: 41.638 km Weights Empty weight: 3.290 kg Functional Lifting capacity: 300 kg Working height: 1.615 cm Dimensions of cargo space: 606 x 220 x 290 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Itodpfx Anezfhwxewjh TÜV Marked: yes Delivery terms: EXW Max swing of platform in degrees: 400 Additional information Please contact Christian Theißen for more information Manufacturer: Multitel Model: MT162 Year of build: 2016 Condition: Used Data: Max. working height: 16,17 m Max. platform height: 14,17 m Max. reach: 11,18 m Platform dimension WxD: 1,40 x 0,71 m Max. basket load: 300 kg Swivel range: 400° Support width vertical: 3,53 m Support width one side: 2,88 m Support width both sides: 3,53 m Transport dimensions LxWxH: 6,06 x 2,20 x 2,90 m Driving license category: 3/B Empty weight: 3.290 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket, socket in the basket, supports, HV support. Information: Tüv und UVV new, with roof protection. Location: 41468 Neuss immediately available

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80, water-cooled Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Ijdpozd Ultefx Anweth 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Defensor steam humidifier. Defensor Mk5 resistance steam humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifiers are manufactured according to the current state of the art and the recognized safety regulations. Nevertheless, improper use of the Defensor Mk5 steam humidifier can pose risks to the user and/or third parties and/or cause damage to property. To ensure safe, proper, and economical operation of the Defensor Mk5 steam humidifier, observe and follow all instructions and safety precautions in this installation and operating manual. Defensor Mk5 Visual series For indirect or direct room air humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 Max. steam output in kg/h 80.0 Iodozd Uk Nepfx Anweth 400V/3~/50...60Hz Mk5 ... 80 Unit A: 40 kg/h Unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a Vötsch shock test chamber. Temperature shock test cabinet, water-cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Heating 11 K/min Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation in the center of the usable space ± 1 K Spatial temperature deviation ± 2 K Temperature change rate Itsdpfxezd Rzkj Anwsh Heating 2 K/min Cooling 3 K/min Test chamber volume 125 liters Temperature range, warm chamber +50°C to +220°C Temperature range, cold chamber -80°C to +70°C Test chamber dimensions: width 470mm, depth 650mm, height 410mm External dimensions: width 930mm, depth 2115mm, height 1970+mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a test run, which will be monitored with calibrated devices. Type: VT 7012 S2 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), profile bending machine Ijdpowtph Djfx Anwsth

Condition: good (used), Year of construction: 2007, operating hours: 14,000 h, functionality: fully functional, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain 530, controller model: Heidenhain ITNC 530, rotational speed (min.): 8,000 rpm, spindle speed (min.): 8,000 rpm, coolant supply: 20 bar, number of spindles: 1, input voltage: 29 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C80, used, fully operational. The machine has always been maintained by Hedelius over the years to keep it up to standard. (New spindle, new guides, etc. – invoices and documentation available) Itodpey Rmv Hjfx Anwoh Spindle hours: 14,000 h 3-axis machining Coolant filtration system Pendulum operation, mountable partition available Heidenhain 530 ICS 20 bar (internal cooling) Handwheel Measuring probe SK 40 Tool changer Total weight: 15 t, Transport dimensions approx. 6500x3000x3000 mm

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Itodpfx Anozd N Sujweh

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Ijdpjzdnxgsfx Anwoth Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, Clamping unit: Clamping force 800 kN Mould opening force, max. 55,3 kN Travel force movable platen opening 31,1 kN Travel force movable platen closing 22 kN Size of mould platens (h x v) 720 x 670 mm Distance between tie bars (h x v) 470 x 420 mm Mould opening stroke 500 mm Mould height min 250 mm Max. daylight 750 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 40 mm Ls/D ratio 20 Injection pressure 1860 bar Itsdpfx Aezd Amxjnwsh Stroke volume 201 ccm Shot weight (PS) 182,9 gr. Injection rate 126 ccm/s Screw speed 295 1/min Plasticising rate max. 26 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Installed heating capacity 11 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 2,00 x 2,20 m Total machine weight 3900 kg Max. mould weight 995 kg Accessories: - Anti vibration pads - Anti vibration pads - 8-fold water distributer - BluePower - Krauss Maffei Robot SPX10 Additional Options: - 1 x Air valve - 1 x hydr. core pull - Robot interface according to Euromap 67 - 8 x hot runner controller