Used Welding Turntable, Lifting Rotating Device for sale (39,785)

Condition: excellent (used), Rotary table for polishing or similar Infinitely variable speed very robust, no vibration Godpfxerxb Upj Aqgsuh with chuck diameter 300mm Total height 1.0 m Height to jaw chuck center 0.85 m, length 1.3 m, width 0.6 m Accessories 4 wheels (machine mobile)

Condition: good (used), Inert gas welding device, arc welding system, MIG/MAG welding system Gusdpfx Aqelpi S Negjh -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Condition: used, Year of construction: 2003, Welding Rotator SAF POSISAF 1E Shelf diameter: Ø 295 mm Year of construction: 2003 Maxi Capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Voltage: 220 V mono Total dimensions on support: 400 x 400 mm x H 1100 mm Godpfx Aez I Dgroqgsuh

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, Equipment: foot remote control, rotational speed infinitely variable, 3000 kg load capacity welding positioner, complete set Horizontal load capacity: 3000 kg, tilted load capacity: 3000 kg 2 gears for tilt adjustment Motor protected by two steel swing doors Very robust design Speed steplessly adjustable from 0.05 to 0.7 rpm (optionally up to 1.5 rpm) Gsdpfx Aqjw T S Husgjuh Turntable diameter: 1400 mm Tilt up to 120° Height horizontal: 1300 mm, tilted to center: 1050 mm Dimensions: Length 2.0 m x Width 1.4 m Handheld remote control with digital display and dual foot pedal

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Gusdpfxeyqr Sxe Aqgeh

Condition: new, – Horizontal capacity: 1200 kg – Vertical load capacity: 600 kg – Table size: 550 mm – Table size: 1000 mm – Electrically tiltable – Cable remote control – Digital display – Documentation Gjdpfx Aoligqcoqgjuh – 400V

Condition: used, Electric chain hoist, electric lifting gear, crane DEMAG type DKUN 2-160 K V3 F6 Guodpfjxpqz Isx Aqgjh Serial no.: 61620975 Year of manufacture: 1995 Load capacity: 310 kg Hook path: 1.45 meters Distance from suspension to load hook: 450 mm Lifting speed: 12.5 m/min (double fall) Pendant control cable length: approx. 1.9 meters Mains connection: 400 Volt, 50 Hz - 2 lifting strands = 300 kg - only one lifting speed Weight: 33.5 kg

Condition: like new (used), load capacity: 1,500 kg, The Siegmund M-Positioner is perfectly suited for welding, assembly, and maintenance work. Positioning is achieved via a manually operated handwheel. Positioner with load capacities up to 1,500 kg. Torque: 900 Nm Handwheel with handle, Ø 315 mm U-angle compatibility: System 28 Maximum U-angle length: 3,000 mm A – Working height: 850 mm B – Column height: 955 mm C – Total height: 1,140 mm D – Base plate width: 600 mm E – Base plate length: 600 mm Price does not include 3-D accessories. Prices for 3-D accessories, heavy cast parts with 28 mm wall thickness, all newly machined special prices: Gedpfx Aqsx Th H Ejgjuh Original angle bracket 28, U-shape, 500 mm x 200 mm x 200 mm (surcharge €500) or 2,000 mm x 200 mm x 200 mm (surcharge approx. €1,000) or 2,400 mm x 200 mm x 200 mm (surcharge €1,300) or with tabletop, 28 mm grid holes, 2,000 mm x 1,000 mm x 200 mm (surcharge €2,000) Multiple positioners available.

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Gsdpfx Asy Ihbxoqgsuh Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system -Container rotating device: 4 pieces -Rollers: Ø 75 x 28 mm plastic -Roller spacing: 95 mm -Frame: Cast aluminum -Sale/Price: complete Guodpfxjwyt Sms Aqgsh -Dimensions each: 230/185/H90 mm -Weight: 14.4 kg

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Gsdoxf Uqfspfx Aqgjuh Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Good condition

Condition: used, Welding Rotator SAF POSISAF 1E Gsdez I Dgxepfx Aqgsuh Shelf diameter: Ø 295 mm Max capacity: 100 kg Manual Swivel Rotation by speed varitator right/left Equipped with one 3-jaws concentric chuck Ø 200 mm Voltage: 220 V mono Dimensions on support: L 800 x W 450 x H 1200 mm

Condition: used, Electric chain hoist, electric lifting unit, DEMAG crane, type DKES 2-200 K V2 DI with Dematik BUS control via crane control system Factory No. 61456646, Year of manufacture 2003 Load capacity: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min Fine lifting speed: 0.20 m/min Chain size: 4.2 x 12.2 mm 1 load strand = 200 kg - with DKES2/5 500V control logic - without crane operating control - Dematik BUS control via crane control system - without trolley Mains connection: 400 volts, 50 Hz Rated power: 750 W Gujdpfxjgd Ipno Aqgjh Rated current: 2.4 A in good condition

Condition: used, YALE Electric Chain Hoist Crane Type CPV 10-8/20-4 Gjdpfx Asx Urb Njqgouh Serial No.: VC 000876 S Year of manufacture: 2010 Load capacity: 2,000 kg Hook travel: 4.1 meters Lifting speed: 4 m/min Distance suspension to load hook: 550 mm Pendant cable length: approx. 2 meters 2 fall chain = 2,000 kg Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Emergency stop - Suspension eye on crane top - Without trolley Weight: 65 kg Good condition

Condition: new, Year of construction: 2025, table diameter: 1,000 mm, – Horizontal capacity: 1200 kg – Vertical load capacity: 600 kg – Table size: 1000 mm – Electrically tiltable – Remote control with cable – Digital display – Documentation Gedpfx Aqsliftnegjuh – 400V

Condition: ready for operation (used), functionality: fully functional, total length: 7,370 mm, total width: 6,000 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection by 23.12.2025! The offer consists of a rail system with vacuum lifting devices and lifting beams! MACHINE DETAILS Length: 7,370 mm Width: 6,000 mm EQUIPMENT Adjustable load capacity 3x Strödter Zybomat ZP 60 adjustable vacuum lifters 2x lifting beams Manual displacement possible Gsdpfx Aqjx Dipyjgeuh Note: The image of the assembled rail system is for illustration purposes only and shows a system with different dimensions. The system offered here has already been disassembled (see photos).

Condition: used, Technical details: power consumption: 2,3 kVA open-circuit voltage: 56 - 198 V protection class: IP 44 weight of the machine approx.: ca. 35 kg dimensions of the machine approx. HxWxD: 0,4x0,3x0,27 m equipment: - incl. earth cable and 3 pcs bolt taper for dia 2x 5mm and 1 x 6mm tested functional * Godpou Nwxzsfx Aqgouh

Condition: good (used), functionality: fully functional, load capacity: 3,000 kg, Equipment: foot remote control, Sideros Rotolift with 3000 kg load capacity Gedpjy Hl A Rofx Aqgsuh Technically sound, operates flawlessly Dimensions: Horizontal height min. 0.72 m, horizontal height max. 1.59 m Vertical height min. 0.74 m, vertical height max. 1.54 m Length 2.5 m, width 1.0 m Diameter 1.25 m

Condition: used, Electric chain hoist, electric lifting mechanism, crane STEEL type Si T 201-10/2.5 No.: 1202373, Year of manufacture: 1989 Load capacity: 250 kg Hook travel = lifting height: 3.5 meters Lifting speed: 10 m/min. Fine lifting speed: 2.5 m/min. 2 load chains = 250 kg Cable length for control pendant: approx. 1.4 meters Power connection: 400 volts, 50 Hz. Guodpfx Aqog Rhx Rsgoh - Suspension eye on the top of the crane Weight: 22 kg Good condition

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment - includes hand-held remote control Gsdpfx Aqjyupd Hogouh - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: like new (used), functionality: not functional, load capacity: 6,500 kg, Load capacity 6500 kg Please note: Arm diameter adjustable from 1880 mm to 4550 mm (swivel-out) Space-saving and continuously adjustable, the extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power 3 kW Torque 15000 Nm Height 800 mm Maximum current transmission 2000 A Weight 4700 kg Godpox Thucjfx Aqgsuh with hand and double-foot remote control CE certificate, declaration of conformity, documentation, circuit diagram with original 2016 quotation invoice Current new price approx. €28,000

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type DKUN 1-100 K V1 F4 Manufacturer's serial number: 61801899, Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Control pendant cable length: approx. 1.7 meters Guedpfx Aohtr Eyoqgoh Power connection: 400 Volts, 50 Hz 1 load strand = 100 kg Weight: 16.5 kg Good condition

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Guedpfx Ajrl S Ufjqgeh Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Gedpsu Swb Uefx Aqgeuh Pendant control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Net weight: 16.5 kg Good condition

Condition: good (used), Welding rotary device, rotary tilting table, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary and tilting table, welding rotary device -Three-jaw chuck: Ø 200 mm -Speed: 1/8 to 2 1/4 rpm -Direction of rotation: Right/left rotation -Peak height: 535 mm -Axles: 1 piece -tiltable: No Gjdjf Nb Dwepfx Aqgouh -Height adjustment: No -Dimensions: 925/1100/H700 mm -Weight 188 kg