Used Wenzel Wenzel Xo 55 for sale (5,953)

Condition: excellent (used), Year of construction: 2009, operating hours: 41,750 h, functionality: fully functional, clamping force: 2,800 kN, screw diameter: 55 mm, displacement volume: 404 cm³, Equipment: documentation/manual, Model: Engel Speed 280/55 Year: 2009 Screw diameter: 50 mm Injection volume: 404 ccm Screw speed: 340 rpm Injection rate: 1901 ccm/s Spec. injection pressure: 1390 bar Spec. injection pressure increased: 2025 bar Nozzle stroke: 465 mm Clamping type: Toggle Working hours: approx. 41,750 h Rjdpfx Asyzhy Uodiou

Year of construction: 2026, condition: new, New notching sawing machine LGF ALFA 55 with Ø 500 mm and Ø 550 mm sawblades. Machine in stock Specification: - Machine totally enclosed - Cylinder stroke 825 mm - Adjustable feeding of the sawing carriage 4-10 mt/min - Both saw blades tilting range +/- 45° by means of hand wheel - Possibility to perform cuts at any intermediate degrees - Adjustable working bench in terms of height and depth by means of hand wheels - Tilting fence on the working bench at 60°/90°/-60° - Maximum profile height 215 mm - Maximum profile width 250 mm - Maximim depth of horizontal cut 190 mm Redpfxod Nh S Ns Adiju - Maximum depth of vertical cut 200 mm - Three phase self-braking motors 2,2 KW (3 HP) - 2800 rpm - Saw blade shaft Ø 30 mm - Working pressure 7 bar Equipment: - Nr. 1 Digital Display on tilting fence - Nr. 2 Digital Display on saw blade tilting - Nr. 1 Digital Display on fence for profile tilting - Nr. 1 Analogical counter on working surface height - Nr. 1 Vertical TCT saw blade Ø 550 mm - Nr. 1 Horizontal TCT saw blade Ø 500 mm - Pneumatic clamps - Automatic lubrication by means of nebulizer - Waste retrieval front tank on wheels - Nr. 2 waste retrieval tanks on the sides - Air filter - Service spanners

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW Rsdoyzr Tfspfx Adieu - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, functionality: fully functional, power: 27 kW (36.71 HP), overall weight: 800 kg, fuel type: diesel, Year of construction: 1994, operating hours: 2,274 h, operating pressure: 8 bar, volume flow: 3.1 m³/h, type of cooling: air, machine/vehicle number: YA3-047017-00231781, motor manufacturer: Deutz, Atlas Copco screw compressor without chassis. Redpfeyilywjx Adiou

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 18,794 h, load capacity: 6,000 kg, lifting height: 5,500 mm, free lift: 2,750 mm, fuel type: electric, mast type: duplex, construction height: 3,650 mm, fork length: 1,400 mm, drive type: Elektro, Electric side loader Load centre: 700 Fork width: 250 mm Fork thickness: 60 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tyre type: Pneumatic Rear tyre type: Pneumatic Battery voltage: 80V Battery capacity: 1250Ah Description: Height-adjustable forks, fork carriage with level compensation !!! - BATTERY BAD !!! 3rd valve, 4th valve, rear working light, front working light, heater, full cabin, Knife blade forks, radio Rsdpfx Asy A Amredieu

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: APF 136194, overall weight: 2,550 kg, total length: 2,900 mm, total width: 1,450 mm, total height: 2,200 mm, space requirement length: 3,000 mm, space requirement width: 1,600 mm, motor manufacturer: ABB, fuel type: electric, Screw Compressor with Inverter ATLAS COPCO ZT 55 VSD 18.5kW 3.35m3/min 13bar The professional level of service and high-quality goods offered by our company – 'market-proven' – guarantee successful cooperation with you. Rjdpfx Aoy Amh Hodieu We provide a warranty on used compressors and dryers! Our advantage is 24/7 compressor service. Screw Compressor with Inverter ATLAS COPCO GA18VSD 18.5kW 3.35m3/min 13bar Technically sound, ready for operation.

Condition: good (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 55 kW (74.78 HP), type of input current: three-phase, type of cooling: air, overall weight: 700 kg, input voltage: 400 V, total width: 860 mm, total length: 1,670 mm, total height: 1,800 mm, warranty duration: 6 months, Aircooled chiller TECHNOTRANS OMEGA K 400L 55 KW Cooling capacity: 55 kW / 15.64 tons (13/18 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZR125KCE-TFD-455 (scroll) Type of refrigerant: R407c Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos MG100LC-F-H3-CML3A, buffer tank. Dimensions: 1.67x0.86x1.8 m. Weight: 700 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS Rjdpfx Adeyt H Akjieu - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: Rjdpfx Adsyxm Rteieu -Quantity: 1x ultrasound transducer available -Dimensions: 515/160/H115 mm -Weight: 18.9 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 7,576 h, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 255 mm, table length: 885 mm, table width: 320 mm, overall weight: 2,500 kg, table load: 250 kg, Fehlmann Picomax 55 CNC 2/3 Milling Machine The machine is fully functional and in very good technical condition. We purchased it a year ago from a company that owned it from new and always serviced it at the official Fehlmann service center. We are selling it solely because we do not have enough SF32 tool holders. Control: Heidenhain 530. The machine is equipped with a measuring probe. Axis travels: X: 500 mm Y: 255 mm Z (manual quill): 160 mm Z (programmable quill): 147 mm W axis: 500 mm Redpfxsyzt Abo Adiou Table surface: 885 x 320 mm Spindle speed range: 50 – 9,000 rpm Tool holder: SF32 Table load: max. 250 kg Spindle power (S6, 40%): 9.9 kW Machine weight: approx. 2,500 kg Dimensions (L x W x H): 1,900 x 1,900 x 2,300 mm The machine is in very good condition and the spindle has less than 10,000 operating hours.

Year of construction: 2012, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator, power generating unit -Manufacturer: SAB, Power generating unit type D-4107 F -Previous use: Ship -Power: 44/55 kW/kVA 50 Hz Rodpeh I Ez Dofx Adiou -Engine: Deutz type BF 4M 2012 60 kW -Generator: Marelli type MJB 200 MA 4 -Note: without control, without cooling -Individual components: see photos -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg

Condition: ready for operation (used), * Brand: Kleemann * Surface: length 5500 mm, width 1800 mm - 3 decks * Incl.: motor and springs Rjdpfoywmvmsx Adisu

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2100 mm - 2 decks Rsdpfsywmpmjx Adisu * Screen opening upperdeck: [] 18 mm. * Screen opening lowerdeck: [] 8 mm. * Driving: 30 kW E-motor * Incl.: springs.

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5500 mm, width 2300 mm - 3 decks Rsdeywmpgopfx Adisu * Driving: 30 kW E-motor * Incl.: springs.

Condition: ready for operation (used), * Brand: Krupp * Surface: 5500 x 2100 mm - 2 decks * Upper deck: sieve opening [] 35mm * Lower deck: sieve opening [] 16 x 3mm * Driving: 22 kW * Incl.: springs and spring consoles Rjdpfxjywmc To Adiju * Stock: 2 pieces

Condition: ready for operation (used), * Brand: IBAG Rsdpjywl R Nsfx Adisu * Surface: 5500 x 1500 mm - 1 Decks

Condition: good (used), Year of construction: 2008, operating hours: 45,000 h, Used, oil-free, variable 55 kW screw compressor ALMIG LENTO 55 WK (water-cooled) The compressor is in good, neat condition. Year of construction: 2008 Operating hours: 45,000 operating hours Technical specifications Type: LENTO 55 WK Possible operating pressures of the system (continuously adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C: at 5 bar min / max: 1.41 / 7.79 m³ / min at 6 bar min / max: 1.40 / 7.74 ​​m³ / min at 7 bar min / max: 1.39 / 7.69 m³ / min at 8 bar min / max: 1.38 / 7.64 m³ / min at 9 bar min / max: 1.37 / 7.59 m³ / min at 10 bar min / max: 1.35 / 7.29 m³ / min Rated power drive motor: 55 kW Degree of protection / insulation class of drive motor: IE 3 Protection / insulation class fan motor: IP 54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Redpegkbfhofx Adisu Cooling water requirement at 100% load (with inlet + 15 ° / delta t = 15 K): 55 l / min Cooling water supply (min / max): 5/35 ° C Cooling water outlet (max): 45 ° C Cooling water pressure (min / max): 4/10 bar Cooling water volume (min / max): 140 l / min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point refrigeration dryer 50% load: 3 ° C 100% load: 3 ° C Sound pressure level (DIN 45635 part 13) soundproofed, at 50% load: 64 dB (A) 100% load: 73 dB (A) Length: 2,300 mm Width: 1,400 mm Height: 1,560 mm Weight: 1,590 kg Compressed air connection: G 1 1/2 inches Visit our shop, we always have a large number of new and used compressors in stock.

Condition: used, DMG HSC 55 linear is a 5-axis machining center designed for precision, high accuracy and reliable performance. Travels X 450 mm, Y 650 mm, Z 460 mm; A-axis -10/+110°; tool magazine 120 places; tool Ø max 80 mm, length 250 mm, weight 6 kg; spindle taper HSK 63. Spindle speeds 2–28,000 min⁻¹; spindle power 38/28 kW; supply 3x400 V 50 Hz; total power 70 kVA; machine weight ≈9500 kg; dims L3210×W2930×H2900 mm. Delivers tight tolerances; typical applications: automotive, aerospace, medical, watchmaking and toolmaking. Rsdpfx Adsyxn Efjieu

Condition: used, Year of construction: 1990, Gebruikte ponsmachine van Kingsland Type: 55 P 625 Capaciteit: 55 ton Keeldiepte: 625 mm Rodsyu Sqiepfx Adieu Bouwjaar: 1990

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Redpfx Adsu Ivkgsiou Technical data of machine: - See attached OC (order confirmation) Technical data automation: - Available, on request.

Condition: new, functionality: fully functional, machine/vehicle number: BSD, Year of construction: 2023, operating hours: 595 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,760 mm, fuel type: diesel, mast type: triplex, construction height: 2,730 mm, power: 55 kW (74.78 HP), fork length: 1,400 mm, empty load weight: 9,400 kg, total length: 4,500 mm, drive type: Diesel, construction width: 2,230 mm, Side loader Chassis number: BSD Load centre: 700 Fork width: 180 mm Fork thickness: 50 mm Mast type: Triplex Transmission: hydrostatic Condition: new machine Technical condition: very good Front tyre type: pneumatic Front tyre size: 27x10-12 Front tyre condition: 80 - 100% Rear tyre type: pneumatic Rear tyre size: 27x10-12 Rear tyre condition: 80 - 100% Rsdsyw Aynjpfx Adiou Hydraulic fork height adjustment – rear, adjustment range: +/- 100 mm, 2x additional work lights, seat – Grammer Maximo L – air-suspended, platform height 850 mm

Condition: used, Fröling Turbomatic TMC – Automatic Wood Chip Boiler (35–110 kW) Multiple Fröling Turbomatic TMC units in stock – immediately available. Output (kW) – Price (net, excl. VAT) 35 kW – €5,000 55 kW – €6,000 70 kW – €7,000 85 kW – €8,000 110 kW – €10,000 The Fröling Turbomatic is a fully automatic biomass boiler, suitable for wood chips, shavings, and pellets. ✔ Fully automatic operation ✔ Heavy-duty industrial design ✔ High operational reliability The price already includes the feed auger (dosing screw), which automatically transports the fuel directly into the combustion chamber. The complete discharge system (fuel extraction from the storage room) is generally not included and is available separately. 👉 For the 110 kW model, the complete discharge system is already included in the price. ⸻ Technical highlights: • Lambda-controlled combustion for optimal efficiency and low emissions • Automatic grate with shaking and tilting function for clean combustion • Multi-pass heat exchanger with automatic cleaning (WOS system) • Automatic ash removal from combustion chamber and heat exchanger • Induced draft fan for maximum operational safety • Large combustion chamber with refractory lining for high temperatures and stable combustion ⸻ Further advantages: • Modular system – easy installation • Individual drives for all components → high reliability • Adaptable to various fuels and moisture levels ⸻ TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology and operate a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available inventory of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approximately 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our range includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Discharge systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: Additionally, we offer a large selection of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic to industrial scale. Redowakktjpfx Adiou 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Latest offers: Much of our current stock can be found on our website: topheatingsystems.com We also have additional equipment that is not yet advertised. 📅 Viewing: Warehouse visits are possible by prior appointment. If you are interested, please contact us – we will be happy to help you find the right solution.

Condition: used, Year of construction: 2004, operating hours: 76,000 h, total height: 2,480 mm, total width: 2,330 mm, total length: 9,830 mm, screw diameter: 70 mm, clamping force: 4,200 kN, displacement volume: 1,047 cm³, 2. Unit 55 with ø 22 Injection pressure: 1674 bar Volume: 30cm³Distance between injection unit 1 and 2: 300 mm (piggy / Multinject) clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar equipment included screen text german Rsdpfsyv E Ewsx Adiju core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 2131, Max. pressure: 55 kN Throat: 175 mm Adjustable punching stroke: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Rsdpenacy Tofx Adiju Notching stroke adjustable: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Floor space required: 1170 x 620 x 1470 mm weight: 930 kg

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: Rsdol Dpc Ejpfx Adisu • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: excellent (used), Year of construction: 2018, EMCO Concept MILL 55 Year of manufacture 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training with various industrial controls. Machine complete with full enclosure, CE-compliant safety features, continuously variable main drive, automatic reference point approach, machine light, electrical and mechanical preparation for automation, PC interface card, PC-machine connection cable, data storage device with machine data, tool set for operation, operating manual with spare parts list. The interchangeable control system The interchangeable control system, with which all Concept machines can be equipped, is unique. The user is trained on all commercially available CNC industrial controls on a single machine. Currently, up to eight different controls can be learned. The result: CNC technicians can be deployed flexibly. And that's a decisive advantage: for the specialists as well as for the company. Working Area • Longitudinal X-axis travel: 190 mm • Transverse Y-axis travel: 140 mm • Vertical Z-axis travel: 260 mm • Min. spindle nose-to-table distance: 77 mm • Max. spindle nose-to-table distance: 337 mm Milling Table • Table dimensions (L x W): 420 x 125 mm • T-slots: Number, width, and spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling Spindle Drive • Speed range: 150 - 3500 rpm • Three-phase asynchronous motor power: 0.75 kW • Spindle torque: 3.7 Nm Axes • Working feed: 0 - 2 m/min • Maximum feed force X/Y: 800 N • Maximum feed force Z: 1000 N • Average Positioning range according to VDI 3441 in X/Y: 0.008 mm • Average positioning range according to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection with directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery Emco Concept Mill 55 with tool changer Cable Easy2Operate WinNC Sinumerik Operate Base Leveling elements I/O expansion Pneumatic expansion Automatic door Pneumatic vise Robotic interface DNC interface W-holder package Redpfxswkpzlo Adiou