Used Wide Planing Machines Fisher Hmb-85 for sale (70,969)

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine Tagliabue TA G T12-KS-SIN 1350, year 1997. Configuration: 1pc. rubber cylinder 1pc. electronic segmented pad 1pc. cross band Bedpsyzrqqjfx Af Djwr Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Available immediately.

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine Tagliabue TA G-13-KS-DX 1350, year 1997. Configuration: 1pc. rubber cylinder 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 2 motors total power 40kW Condition very good ! Bsdpfxoyzrpmo Af Dowr Available immediately.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Unisign Uniport 6000 Year of manufacture: 2010 / Commissioned: 2011 Control: Siemens 840 D Travel ranges: X = 10,000 mm, Y = 1,500 mm Enlarged spindle ram stroke: Z = 1,000 mm Enlarged clearance height: 1,000 mm Clearance width: 1,500 mm Main drive: 36 kW, n = 6,000 rpm, 720 Nm 2-speed gearbox, 1:4 Taper: SK 50 Bodpfxsymb Eae Af Dewr Machining capacity in C45: - Solid drilling D=120mm - Tapping M55 - Milling 100 cm³/min Gantry design with traversing portal bridge and stationary clamping table. Clamping table equipped with transverse clamping beams at 750 mm intervals; standard plate sections eliminated. Hydraulic clamping device with clamping bridges for axle machining, including hydraulic unit Angle drilling and milling head, n = 4,000 rpm, SK 50 High accuracy and stability thanks to Hirth coupling Automatic tool change into the angle head Measuring probe RWP20.50-M Pendulum operation Safety fence with light curtains, Sick brand Clamping table with transverse clamping beams at 750 mm spacing Tool chain magazine on portal column with 30 stations Machine cooling unit Water-air heat exchanger integrated in the control cabinet Unisign remote diagnostics for Siemens Sinumerik 840 D Makrolon curtains on both sides of the portal bridge, motorized height adjustment Partition wall with viewing window Chip conveyor with hinged belt design Mounting and alignment elements included

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,000 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 18,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 38 Nm, overall weight: 65,000 kg, Initial commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ± 100° Bwjdpfoyrdc Ejx Af Dsr C-axis: ± 360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with 18H12 T-slots / 250 mm spacing 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power consumption: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided access doors - 10-position tool changer Optional at extra cost: - Wireless probe - Heidenhain remote diagnostics Machine condition Fully functional, very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Condition: excellent (used), Year of construction: 2014, operating hours: 68,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,200 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 30 m/min, torque: 167 Nm, overall weight: 35,000 kg, Initial commissioning: December 2014 Control system: Fidia X-axis: approx. 2,200 mm Y-axis: approx. 3,500 mm Z-axis: approx. 1,200 mm A-axis: ± 100° C-axis: ± 275° Machine operating hours: approx. 68,000 h Total spindle hours: approx. 26,500 h Clamping table: 2,000 x 3,500 mm with T-slots 2-axis fork milling head Spindle power: 70 kW Spindle speed: max. 15,000 rpm Torque: max. 167 Nm Tool holder: HSK 100A Tool clamping: hydraulic Linear axis drives Bsdpfxoyrc Aks Af Dewr Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Connection data Voltage: 400 V Frequency: 50 Hz Dimensions, weights Required space for machine without peripherals: approx. 8,000 x 6,000 x 5,000 mm Total weight: approx. 35,000 kg Additional equipment - Coolant system - 26-place tool changer - Work area enclosure - Chip conveyor Available at extra charge: - Wireless touch probe - BLUM laser Condition of the machine Fully operational, very good condition. Can be inspected under power.

Condition: excellent (used), Year of construction: 2012, I sell the widebelt sanding machine SCM Sandya 16 S 110, year 2012. Configuration: 18,5 KW hard rubber cylinder 15 KW hard rubber cylinder 11 KW combi unit soft rubber cylinder + pneumatic jumping pad. Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2750kg 3 motors 18,5 + 15 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately. Bwodpfx Aeihfawof Djr

Condition: excellent (used), Year of construction: 2006, I sell the widebelt sanding machine SCM Sandya 7 S 110 Bsdpfjxtxhkex Af Dowr Year 2006. Configuration: 11 KW steel cylinder 11 KW hard rubber cylinder soft rubber cylinder Working width 1100mm Pressure rollers for short elements. Air-blow on all units. Total weight 2400kg 2 motors 11 + 11 kW Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 2000, I sell the widebelt sanding machine Costa A CT 1150, year 2000. Configuration hard rubber cylinder - electronic segmented pad. Working width 1150mm Bwjdpfog Trubsx Af Djr Bands 1180x2620mm Pressure rollers for short elements. Air-blow on both units. Total weight 2300kg 2 motors 15 + 11 kW Additionally built brushing unit with bottom cleaning brush. Including full documentation. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Condition: excellent (used), Year of construction: 1996, I sell the widebelt sanding machine OTT MEGA TR11, year 1996. Bwedpfxeywrzbs Af Dsr Configuration: Hard rubber calibrationcylinder Combi unit rubber cylinder + pneumatic jumping pad with segment control. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 11kW 2 Feeding speeds. Sensitive adjustment of pad position. Pneumatic adjustment of pad and cylinders pressure position. Condition LIKE NEW ! The machine was working only a few. Available immediately.

Year of construction: 1988, condition: like new (used), Location Kłodawa 66-415 Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Four-sided planer, banding machine, Gabbiani spichetting machine Max planing width: 160 mm Max planing height: 100 mm Min. Element length: 180 mm Spindle diameter: 30 mm Number of spindles: 6 Spindle order: down rights, left, Mountain, Mountain bottom Bsdpfxedx Elmo Af Dewr Crawler feed: top, bottom Smooth infeed adjustment: 4 - 34 m / min It is possible to work feed at an angle of: 0 ° - 30 ° Feed on cardanach Manual spindle height adjustment Adjustable heads in all directions Automatic lubrication of the track All bearings replaced with Teflon Machine after a full review The machine is adapted to the production of parquet and slats Dust Extractors: 6 x 120 mm Power supply: 400 V Total power: 26.2 kW Dimension of the machine Length: 4060 mm Width: 1500 mm Height: 1200 mm important: planed tables in the whole machine and leveling, setting angles and

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 Maximum passage thickness of thickness planer: 250 mm Height adjustment of thicknessing table: electric Planer thickness display: digital display Feed speed: 6/12 m/min Infeed roller: Steel Pull-out roller: steel Table rollers: no Motor power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Machine width: 882 mm weight: 615 kg Bedpfxel D Rwte Af Djwr

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 2,000 mm, total height: 1,800 mm, total length: 5,500 mm, overall weight: 6,500 kg, type of input current: three-phase, power: 150 kW (203.94 HP), Stetson Ross 6-12-C1 Planer/Moulder Reliable Stetson Ross 6-12-C1 woodworking machine for sale. Robust industrial design, built for intensive operation. Ideal for planing, profiling, and processing boards, logs, and surfaces in large quantities. The machine runs smoothly, has been regularly maintained, and is ready for immediate use. Bwodpjxvn Tbjfx Af Dsr Equipment overview: Model: Stetson Ross 6-12-C1 Application: wood planing / profiling Solid industrial construction Smooth operation and high processing quality

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA K CCC 1350, year 2004. Configuration: 55 KW steel calibration cylinder 45 KW hard rubber cylinder 37 KW soft rubber cylinder. Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Bsdpfst Rn E Tex Af Djwr Pressure shoes for short elements. Air-blow on all units. 3 motors 55 + 45 + 37kW Including full documentation. Condition very good ! Available immediately.

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Bsdpewzzfkofx Af Dewr Subject to price changes, errors, and misprints.

Condition: new, Extra strong thicknessing planer and moulder for commercial use. The special assembling of the cutterblock, allows the machine to be equipped with special moulderheads. electronic display and measuring of the table height electronic table adjustment with an accuracy of 0,1 mm extra long thicknessing table 4-cutter block automatic star/delta starting continuously adjustable feeder speed with digital display first feed roller grooved, second and third are made of steel two height adjustable cylinders on the thicknessing table 4-way table suspension planer knife gauge Bodpsvrvfhefx Af Dswr Technical data: planing width 820 mm feeding speed 4 - 19 m/min planer shaft diameter 150 mm max. chip removal 7 mm length of thicknessing table 1200 mm motor power 100 % duty cicle 11 kW/15 HP (19 HP S6) feeding motor 1,5 kW/1 HP speed 4600 rpm dust collector plug 150 mm weight 1380 kg Additional Equipment 20 HP motor rubberized feed rollers tersa cutter shaft milling unit with cutting plates

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Bodpeyf A H Njfx Af Dswr Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Year of construction: 2004, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 2917, Thermo Scientific ARL 3460 Spectrometer Thermo Scientific ARL 3460 optical emission spectrometer (OES) for sale. This unit was previously used in a foundry and was operational until it was replaced. The equipment is designed for rapid chemical analysis of metallic materials and was used in foundries and the metallurgical industry for quality control and composition verification. Features: Bedpfxezdzgqo Af Dowr • Brand: Thermo Scientific • Model: ARL 3460 • Equipment type: Optical emission spectrometer (Spark OES) • Year of commissioning: 2004 • Condition: operational until replacement • Origin: foundry / metallic material analysis • Maintenance: Annual maintenance inspections • Applications: quality control and chemical analysis of metals • Analytical capability: simultaneous analysis of multiple elements, depending on the line/installed configuration, including C, Mn, Si, P, S, Ni, Cr, Mo, N, Cu, W, Nb, V, Co, Al, Ti, and Fe • Common materials: iron, carbon steels, stainless steels, super duplex steels, nickel-based alloys, and other metallic alloys • Includes: PC, monitor, spare parts, and commonly used consumables available with the equipment • Reason for sale: equipment upgrade Additional information, photographs, and sales terms can be provided to interested parties.

Year of construction: 2014, condition: used, This listing is for 1 of 2 Thermo Scientific ORBITOR RS Microplate Handler The unit is in full working condition and ready for immediate use This robotic microplate handler is a versatile arm designed to provide accurate and consistent automated movements for laboratory workflows. Manufactured by Thermo Scientific, this reliable collaborative robot is an excellent addition to any modern high-throughput screening facility. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Bjdpfx Aozqf I Eef Dswr 2015 Cedrex Fluid X xsd-48 Pro Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for a Thermo Scientific Multidrop Combi Type 836 Microplate Dispenser. The unit is in full working condition and ready for immediate use. This bulk reagent dispenser delivers precise, high-speed fluid handling across various microplate formats. Ideal for high-throughput screening, it features an easy-to-use interface and ensures low dead volume to save valuable reagents. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Bsdpfxszgdf Ij Af Dowr Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for the Thermo Scientific ClearVue Coverslipper The units are in full working condition and are ready for immediate use The Thermo Scientific ClearVue Coverslipper is an automated, high-throughput system designed to streamline slide preparation in pathology and histology laboratories. It is engineered to deliver high-quality, consistent results with minimal manual intervention Bwjdsyt Ilajpfx Af Djr Key Features and Performance - High Throughput: The system can process up to 250 slides per hour. It can handle up to 11 slide baskets simultaneously through a load-on-demand system. - Specimen Recognition: The system automatically identifies the type of slide preparation (histology vs. cytology) and adjusts the mountant volume. - Stainer Compatibility: It is compatible with various slide stainers, including:Thermo Scientific Varistain Gemini ES and 24-4. - Sakura Tissue-Tek DRS 2000 series. - Leica Auto-Stainer - Pre-loaded Hoppers: The system uses pre-filled coverslip hoppers (holding 500–575 slips) to reduce glass handling and prevent contamination or fingerprints. - Optical Recognition: Sensors ensure proper slide positioning. The system uses vacuum and pressure to mount the cover glass accurately without bubbles

Condition: used, This listing is for Thermo Scientific CIR19 Circulating Bath The unit is in full working condition and ready for immediate use. This laboratory immersion circulator delivers exceptional temperature stability for sensitive samples. It features an intuitive digital controller, robust pumping capacity, and a durable stainless steel bath reservoir, making it perfect for routine clinical, industrial, or academic research application workflows. Transparency Report and Technical Audit: - Source Pedigree: Biotech / Research Facility - Condition: Direct-from-Bench (Decontaminated/Original) - Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. - Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: Bwedpezgfxvefx Af Dor We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is, Where-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Condition: used, This listing is for the Thermo Scientific CW2 Sorvall Cell Washing Centrifuge. The unit is in full working condition and ready for immediate use. This premium cell washer streamlines blood bank procedures and simplifies cleaning protocols. It offers reliable, automated performance with an easy-to-use digital interface, making it perfect for demanding clinical and research environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: Bodpfx Ajza Dtaof Djwr This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original)

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Vision Wide Vision gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,530 mm, and Z-axis travel of 750 mm. The spacious work table size of 2,000 × 1,530 mm makes it ideal for large, flat workpieces. If you are looking to get high-quality milling capabilities, consider the Vision Wide Vision gantry milling machine we have for sale. Contact us for further details. • Highlights: • Modern machine (2016) designed for low maintenance and easy integration into production lines • Large work envelope suitable for large, flat workpieces (mold making, aerospace, mechanical construction) Technical Specification Bsdpfx Aszqc A Tof Dowr Taper Size BT 50

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Bedpfx Afoy Tpb Ro Dswr Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 2006, functionality: fully functional, CUTMASTER Fisher + Rückle AFD-35/2600 is an industrial, heavy-duty double-blade longitudinal veneer guillotine. Bsdpfx Aey Tm Tkef Dowr Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Double-blade Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW