Used Wmw Abw Thread Cutting Chuck for sale (19,237)

Condition: used, Year of construction: 1984, functionality: unexamined, Single-column press 250 t has not been used. Sold on behalf of customer. Inspection possible by appointment. Djdpoy Hgk Aofx Ad Neut

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 130 mm x-travel: 2750 mm y-travel: 1500 mm z-travel: 1250 mm B-axis (table): 360 W-axis (spindle longitudinal): 900 mm control for program: TNC 155 Bahnsteuerung / contouring control tool taper: SK50 table load: 6,3 t table-size: 1600 x 1400 mm table rotating: 360 ° range drill spindle revolution per minute: 3 - 1000 U/min total power requirement: 100 kW dimensions electric cabinet: L: 650 x B: 2800 x H: 2100 mm Dsdpfx Adju Idrfe Neut machine dimensions LxWxH: siehe Liste m weight of the machine ca.: ca. 15,0 t Contouring control Facing slide feed 210mm (U-axis) hydraulic unit Boom with control panel Measuring system Heidenhain *

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Dujdpfsmi Rpijx Ad Nst 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen Duodpfx Aswypp Ied Nst - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: good (used), Reamer, twist drill, drill -Twist drills: different sizes on request Dedev H D N Rjpfx Ad Nout -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: new, Brand New - One Year Warranty Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Weight 4500 kg Dusdevv R Hzjpfx Ad Njt Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: new, Year of construction: 2025, ML750 Inner chase size Djdpfxjvv R H Uj Ad Njut 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Duedpfx Asp H Swdsd Net Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: used, Guideway and surface grinding machine WMW FRITZ HECKERT Aschersleben type SZ 1000 x 1250 x 3000 / 344 make no. 13.2236.2 year of construction 1989 nominal grinding area 3000 x 1250 mm table clamping area 3240 x 1000 mm grinding length max. 3300 mm Machining width 1250 mm Machining height 1250 mm grinding wheel diameter (surface grinding support) max. 600 mm grinding wheel width (flat grinding support) max. 100 mm grinding wheel diameter (swivel support) max. 450 mm Mains connection 400 Volt, 50 Hz - grinding support swiveling, drive power 16,5 kW, infinitely variable speed - grinding support for surface grinding, drive power 15 kW, infinitely variable speed - new electrical control, based on SIEMENS S7 from year 2001 - new electric control cabinet beside, year of construction 2001 - infinitely variable grinding wheel speed at both grinding supports - swiveling wheelhead for guideway and profile grinding - swivel-mounted and height-adjustable control panel - coolant system adjacent - Hydraulic system adjacent - oil circulation lubrication adjacent - Various grinding wheels and holders space requirement complete L x W x H 11900 x 7700 x 4600 mm Duodpfx Ajhv A A Dsd Njt weight 45 ton. very good condition

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Model: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Dusdpfx Adjykqwts Not Equipment: 1 cutting head KMT OEM SL-VI 50 HP 4,000 bar with high-pressure pump 1 plasma cutting head with Hypertherm XPR300 power source High voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive measurement system Collision protection system Water treatment unit TCI HIDROSYSTEM 2.0 Sludge removal system Software: Lantek Expert 2D with automatic nesting function

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Model: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm Dodpfxoyhd Rbs Ad Njut 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Donaldson DFPRO 6 Cyclopeel filtration system Cutting software: Omniwin Standard Availability: immediately Ref.: ä16426

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 60,000 kg, wheel width: 4,300 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, position of the milling head: 0,02, table diameter: 3,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 6,000 mm, wheel diameter: 4,300 mm, total height: 7,000 mm, total width: 5,000 mm, workpiece diameter (max.): 4,300 mm, milling spindle length: 2,500 mm, type of input current: three-phase, milling length: 2,500 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 1 rpm, Vertical Turning and Milling Lathe VL 40 CNC Turning Center’s Specifications Nominal Turning Envelope Faceplate Diameter 3.500 mm Machining Diameter: -maximum -minimum 4.000 mm 0 mm Swing diameter 4.000 mm Machining Heights 2.000 mm Work Piece Weight 60,000 kg Nominal Turning Travels X - Axis Ram Carriage From -100 mm To 2.250 mm + ATC travel Z - Axis Ram 1.500 mm Work Table WorkTable Diameter 3.500 mm Normal face plate with T-slots Work Table Speed: -for machining 1 - 110 rpm Power Continuous S1/ S6 57/75 kW Torque Continuous S1 / S6 70,000 / 90.000 Nm Turning main drive mechanism Gear box reducer and belt transmission, C axis drive Work Table Milling Speed 0.02 to 2 rpm Milling Torque Continuous S1 43,000 Nm Locking Table Torque (hydraulic double side devices) 60,000 Nm Z - Axis Ram Dujdjy Dfraopfx Ad Not Turning & Milling Ram Ram Size 300 x 300 mm Tool shank size: Shank 32*32 / 40*40 mm automated tool clamping Ram Speed 0 to 2.500 rpm Power Continuous S1 22 kW Torque Continuous S1 1.400 Nm Driving mechanism ZF gearbox, two stages, belt transmission ZF gearbox and main spindle bearing sets are supplied with coolant systems, individually for each. Tool taper BT 50 DIN 69871 / automated tool clamping Tool Storage Number Of Tool Magazines two ATC -one for left side, 20 turning/milling/drilling stations -one for right side 20 milling/drilling and part probe Tool Storage 20 + 20 ATC turning capabilities: Maximum Singular Tool Weight – turning toolholder Maximum Singular Tool Weight – milling/drilling toolholder Total Tool Weight Maximum tool size – turning Maximum tool size – milling Maximum tool size - drilling Maximum length 50 kg 25 kg 600 kg 250 x 150 mm Dia. 300 mm Dia. 120 mm 600 mm Axes Drives X and U - Axes Ram Carriage Power Continuous S1 5.5 kW Thrust Continuous S1 40,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 40,000 N Power Continuous S1 11 kW Axes Rates X And Z - Axes Feed Rates 0.02 to 6,000 mm/min X And Z -Axes Rapid Rates 10,000 mm/min Coolant System Coolant Tank Capacity 2.000 L Coolant Pressure / Flow Rate: -internal coolant (turning) -internal coolant (milling) / pressure adjustments steps Filtration unit: -type 6 bar at 100 LPM 30 bar at 60 LPM Cartridge type Chips conveyor Conveyor type Hinged , frontal placed

Condition: good (used), functionality: fully functional, Honing machine SZS 200X500D Dedpfx Adjy D A Nie Nsut

Condition: excellent (used), functionality: fully functional, BFT 90/5-2 CNC SINUMERIK 840D/840DE Technical Specifications Drilling Spindle Diameter: 102 mm Tool Holder: ISO 50 Operating Manual (see photo) Machine Type: Floor Type Boring Mill Manufacturer: UNION KARL MARX STADT Model: BFT 90/5-2 Year of Manufacture: 1989 Control System: CNC Country of Origin: Germany Freight Terms: Ex-works Rostock, loaded free of charge, unpacked Location: Rostock Availability: Immediately Price: On request Dsdpfx Aey Aiarsd Njut Technical Details Spindle Diameter: 102 mm X-axis Travel: 1600 mm Y-axis Travel: 1210 mm Z-axis Travel: 980 mm B-axis (Table): 360° Drilling Depth: 710 mm (W-axis) W-axis (Longitudinal Spindle Travel): 710 mm Table Load Capacity: 2.5 / 3.0 t CNC Program Control: Numerik CNC Table Size: 1000 x 1120 mm Feed Rate (x/y/z/w): 1 - 3180 mm/min Tool Clamping: ISO 50 Rapid Traverse (x/y/z): 4000 mm/min Rapid Traverse (w): 3150 mm/min Maximum Spindle Speed: 4–1600 rpm Total Connected Load: 27 kW Machine Weight approx.: 9700 kg Electrical Cabinet Dimensions: L: 2500 x W: 650 x H: 2200 mm Machine Dimensions (LxWxH): 5.2 x 3.3 x 2.8 m Additional Information Further Features: - Thread tapping via Z-axis possible - Coolant system with pump - Hydraulic unit

Condition: used, functionality: fully functional, Column drilling machine Tool holder MK 4 Djdpfxsy A Sz So Ad Nsut With gear transmission, quill feed.

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 530 mm, spindle bore: 90 mm, turning diameter: 920 mm, Lathe type WMW DLZ 800 III for sale. Dusdpfey Ar Nisx Ad Njt Equipped with Heidenhain digital readout. The machine functions flawlessly and has seen very little use (mainly for maintenance). Includes faceplate, 2x steady rests, several tool holders, and operating manual. - Heidenhain digital readout - Turning length: 3150 mm - Weight: approx. 7300 kg - Power: 13/20 kW - 380 V - Swing over bed: 800 mm - Swing over gap: 920 mm - Swing over cross slide: 530 mm - Spindle bore: 90 mm - Tailstock MK-6 Loading by forklift. Shipping possible by arrangement. Please feel free to contact me with any questions.

Condition: excellent (used), workpiece diameter 60 mm grinding depth 30 mm clamping length 1000 mm weight of the machine ca. 0,6 t Duodjunt Egspfx Ad Nst dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm - Documentation available: No - CE certificate present: No - Serial number: 31577 - Drive system: Conventional - Grinding diameter [mm]: 315 - X-axis travel [mm]: 800 - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information Dsdowya A Sjpfx Ad Njut VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1991, Table clamping surface: 710 x 400 mm Tool holder: ISO 40 Travel paths: X-axis: 400 mm Y-axis: 350 mm Additionally displaceable in Y-axis: 420 mm Z-axis: 380 mm Quill stroke: 80 mm Speed range: 45 – 2240 rpm Feed range, stepless: 6.3 – 1250 mm/min Rapid traverse: 1250 mm/min Drive power: 2.2 / 2.8 kW Dimensions (L x W x H): 1400 x 1600 x 1850 mm Weight: 1900 kg Accessories / Special Features: • 3-axis digital readout by HEIDENHAIN • Vertical and horizontal milling spindle • Vertical milling head with quill, tiltable right and left Dsdsupiypspfx Ad Njut • Stepless feed • Rapid traverse on all 3 axes • Fixed angle table • Coolant system • Chip tray • Spindle clamping by push button, e.g., for tool change • Machine feet • Central lubrication • Control panel • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/8081, Offer Number: D08L/8081 Machinetype: straightening and cutting machine Make: WMW Type: UDARA10 Constr. year: 1980 diameter range: 3-10 mm Dodpowi Svcefx Ad Nsut cutting length: 2000 mm speed - meters/min: 22-71 Location: In our warehouse

Condition: used, faceplate diameter 800 mm total power requirement . kW weight of the machine ca. . kg dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Dusdsyx Ipwopfx Ad Not About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Dodpfexxvqajx Ad Nsut

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. Duedpfx Adeig Hzko Net The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening.

Condition: good (used), Year of construction: 2013, grinding diameter 140-355 mm grinding length 3000 mm Dedpfxjynmpys Ad Nout centre height 260 mm weight of the machine ca. 8,3 t dimensions of the machine ca. 8500 x 3500 mm SA 6Ux3000 external cylindrical grinding machine Year of manufacture: 1981 Retrofit: 1 x 2013 SERWEMA Maximum grinding diameter with tailstock: 140 mm Maximum grinding diameter without tailstock: 355 mm Maximum grinding length: 3,000 mm Center height 260 mm Workpiece weight max. 500 kg Machine footprint 8500 x 3500 mm Machine weight 8500 kg

Condition: used, Technical details: weight: 1900 kg 2 x steady rests for WMW DP2 No.1 & No.2 price per piece * Duodpfjyyb Ntjx Ad Njt