Used Woodland Machinery Mm2617 for sale (74,796)

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Fpodortrykopfx Afusn Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Fpjdpfxsrtrzao Afusn Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Fpodpfsrtrzdex Afujn Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Fsdpfsrtr D Ijx Afujpn Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: good (used), Year of construction: 2002, LANDIS 3SE 14"x 60"ANGLEHEAD CNC GRINDER REBUILT BY LANDIS & TOOLED 2002 Equipped with: NEW FANUC CONTROL 2007 2-Axis Template Truform Servo Step Profile 30 Degree 30" Wheel Dead Headstock Table Traverse Marposs E39 Marposs Table Gauge Lateral Locator 3-Gauge TIR Gauge Steady Rests Wheel Balance Servo Motor-Traverse Stepping Motor Mist Collector Specifications: Swing: 14" Center Distance: 60" Motor: 1200 rpm Motor Pulley Diameter: 7.031" Spindle Pulley Diameter: 6.5" New Wheel Diameter: 30" Worn Wheel Diameter: 22" Max. Wheel: 8500 sfpm Max. Workhead: 333rpm X-Axis Ball Screw Pitch: 5mm per rev. X-Axis Total Stroke: 14.74" X-Axis Motor Pully Wheel Feed Diameter: 3" X-Axis Ball Screw Pulley Diameter: 3" Z-Axis Ball Screw Pitch: 10mm per rev. Z-Axis Total Stroke: 72.88" Z-Axis Motor Pulley Diameter: 3" Z-Axis Ball Screw Pulley Diameter: 6" Fpedpfxsrtr Eae Afujn Total Stroke: +/-2mm Total Marposs Voltage Output: =/-10vdc Dresser One Revolution of the Stepping Motor: .045" Diamond One Revolution of the Stepping Motor: .005" Weight: 25,000 lbs.

Condition: good (used), Year of construction: 1993, Equipped with: 9" Cutter Head Power Stocks Crowning Auto Loader Heidenhein Scales Variable Feed/Speed Cutter Head RS232 Serial Port Fodpfx Asruahwsfuspn Trabon Lube Coolant W/Magnetic Chip Separator AC Servo Motors Full Splash Guards Stack Light Manuals Specifications: Work Gear Pitch Diameter 9" & 12" Cutter Head: 1-12", 1-8" Work Gear Max. O.D. 9" & 12" Cutter Head: 12 1/2", 8 1/2" Diameter Pitch Range: 4-20 Distance Between Centers: 23" Cutter RPM 9" & 12" Cutter Head" 50-500, 50-400 Max. Table Travel Conventional, Tangential, Diagonal: 5", 2" 5"-2" Diagonal Traverse Angle Straight Shaving: 0 Deg. - 90 Deg. Traverse Angle Crown Shaving: 45 Deg. Max. Approx. Max. Table Angle Crowning: 5 Deg. Max. Table Angle Taper: 1 Deg 30' Max. Cutter Head Crossed Axes Angle Left & Right: 25 Deg. Table Cross Feed Inches Per Minute: .5-35 Table Up-Down Feed Inches Per Minute: .004-12.5 Table Up-Down Travel: 8 1/8" Approx. Weight: 9600 lbs

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156# Fpodpfx Aoruakgefusn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Fsdsxdn Nrepfx Afuspn Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: used, machine/vehicle number: 008705, Overall length: 2099 mm Overall width: 1138 mm No of Filter sleeves: 16 Fodpfszq Utdox Afujpn

Condition: used, machine/vehicle number: 008704, Overall length: 3435 mm Overall width: 1100 mm Suction capacity: 5750 m3/h No of Filter sleeves: 60 Fpsdezq Uryepfx Afuon

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Fpedpfxez En Axj Afujn Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 Fodpsz Ekbkofx Afuspn EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: used, Year of construction: 2010, number of aggregates 2 St. working width 2000-3500 mm work height max. 2450-3200 mm Wintech M9Cb Sealing Machine Automatic sealing system for wooden windows and doors with 2 processing units. For a detailed description, see the PDF document. ----- Manufacturer’s technical description: Fpsdpfx Aezmy Ifefujn M9Cb robotic sealing system The machine comprises a robust structure made from aluminium profiles, fitted with motorised conveyor belts on which the window units are transported. The silicone is distributed evenly into the joint by means of two automatically controlled nozzles. The electronic control system, which is in constant communication with the sensor, determines the movement of the guns and the operating parameters. Technical data: Standard Optional Max. window width 2000 mm 3500 mm Max. window height 2450 mm 3200 mm Max. window thickness 160 mm 190 or 250 mm* Max. window weight 150 kg 200 or 400 kg* Loading station 2000 mm 3500 mm Unloading station 2000 mm 3500 mm Choice of silicone: Standard 1 colour 2 or 3 colours Master head 1 2 Sealing of timber panels no yes Formulation adapted to the type of elements no yes Synchronised conveyor belt no yes for heavy loads and/or conveying in both directions Double movable crossbar for flush-mounted hinged window sashes no yes *Please contact us for greater thicknesses or weights Optimisation of the sealing process: The M9Cb robotic sealing system revolutionises the sealing process by injecting exactly the right amount of silicone, thereby preventing unwanted streaks. It enables the glazing beads to be ‘nailed’ invisibly and saves the time required to cover the nail heads. The precision ensures high-quality, uniform sealing, which guarantees optimal watertightness whilst maximising the clarity of the units. With a feed speed of approx. 2 metres per minute, it offers fast and efficient processing on both sides simultaneously (on average 4 minutes per unit). More space available: No more lack of space in the workshop! The M9Cb operates vertically and therefore takes up very little floor space. Leaning against a wall or partition, it frees up the space previously occupied by horizontal sealing tables. In addition, a strategically positioned conveyor belt can also serve as a vertical glazing table, thereby optimising the layout of the work area Automation of sealing: To ensure a seamless seal, it is no longer necessary to juggle the window unit or struggle with fitting seals. The M9Cb automates this laborious process on both sides Time savings: Thanks to the M9Cb, the workflow is no longer one-dimensional. Whilst the machine takes care of sealing the windows and doors, the operator can work on other tasks, e.g. glazing, blocking, packaging... This versatility enables the operator to diversify their activities and thus offers them a more rewarding experience. ----- ----- Price of the above machine on request! -----...

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 0-200-95-6633, functionality: fully functional, input voltage: 400 V, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, overall weight: 3,500 kg, TECHNICAL DETAILS Number of units: 6 1. Unit: Pre-milling unit Manufacturer: Nordson Tools available 2. Unit: Gluing unit 3. Unit: Pressure rollers Tools available 4. Unit: Rough milling unit 5. Unit: Cutting unit 6. Unit: Fine milling unit MACHINE DETAILS Voltage: 400 V Current consumption: 41 A Fuse rating: 50 A Transport packages: 5 Fjdpfxoz Eazyo Afujpn Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Unladen weight: 3,500 kg EQUIPMENT Nordson unit, year of manufacture 2017 CE marking

Condition: ready for operation (used), functionality: fully functional, center height: 700 mm, center width: 800 mm, spindle speed (max.): 240 rpm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning height: 700 mm Turning diameter over bed: 1,400 mm Turning diameter over slide: 640 mm Distance between centers: 800 mm Bed width: 700 mm Spindle bore: 80 mm Fpjdpfxjz Ebc Se Afusn Spindle speed: 110 - 240 rpm MACHINE DETAILS Control system: Conventional Power: 11.5 kW Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,500 x 2,500 mm Net weight: 10,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation

Condition: used, overall weight: 45,000 kg, Maus MTV4LSL500 Turning Machine/Drill. Weight 45,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured. Fedpfxez Hc Npe Afuepn

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: M500.06133, overall weight: 15,000 kg, Emag VSC500 Vertical Turning Machine. Condition Good. Weight 15,000 kg. Fsdsz Hc Nvopfx Afujpn Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 4912, functionality: fully functional, cutting height (max.): 500 mm, cutting width (max.): 770 mm, overall weight: 1,200 kg, saw band length: 5,540 mm, saw band width: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting length up to feed roller: max. 225 mm Cutting length up to stop: max. 210 mm Cutting width up to column: max. 770 mm Cutting height: max. 500 mm Saw blade width: max. 80 mm Saw blade length: min. 5,380 mm Saw blade length: max. 5,540 mm Wheel diameter: 800 mm Table width: 1,200 mm Table length: 800 mm Table: Adjustable MACHINE DETAILS Dust extraction port diameter: 120 mm Voltage: 400 V Power consumption: 31 A Fuse: 63 A Main motor power: 15 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 1,800 x 2,100 x 2,380 mm Fpedpfx Ajz Ea Iajfuon Weight: 1,200 kg EQUIPMENT Adjustable table CE marking Feed rollers, automatic, electric

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,068 h, 2023 | Bobcat T770 | Used Compact Track Loader | 1,068 hours Fodozxh Ahopfx Afuepn Location: Illinois, United States Delivery available to your destination. About this machine: 2023 Bobcat T770 compact track loader with cab, heat/AC, selectable joysticks, and automatic ride control. Equipped with 2-speed drive, high-flow hydraulics, hydraulic quick tach, and 18" staggered C-block tracks with roller suspension. Comes with a rear camera cab cam system and Bobcat extended warranty through 2028. Equipment includes: ✔ Cab with heat/AC ✔ Selectable joysticks ✔ Automatic ride control ✔ 2-speed drive, high-flow hydraulics ✔ Hydraulic quick tach ✔ 18" staggered C-block tracks with roller suspension ✔ 79" smooth edge bucket ✔ Severe duty door (standard duty door also included) ✔ Rear camera / cab cam system ✔ Bobcat extended warranty through 2028 Key specs: Engine: Bobcat M3-Series, 4-cylinder, net power 92 hp (68.6 kW), Tier 4 Operating weight: 4,770 kg Bucket capacity (heaped): 1.9 m³ Hydraulic pump flow: 138.5 L/min Travel speed: 10.6 km/h Fuel tank: 165.8 L Net peak torque: 429 ft-lb (581.6 Nm) What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Pre-sale inspection ✔ Instant shipping rates and worldwide delivery ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, functionality: fully functional, Year of construction: 1991, operating hours: 4,950 h, power: 139.74 kW (189.99 HP), color: green, total height: 4,089 mm, total length: 9,728 mm, total width: 4,572 mm, 1991 | John Deere 9500 | Used Combine Harvester | 4,950 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: John Deere combine harvester with a 190 hp diesel engine, 7,164 L grain tank, 17 ft unloading auger, straw chopper, and chaff spreader. Equipped with PRWD, 30.5-32 and 18.4-26 tires, and factory grain bin extension. ✔ PRWD ✔ 30.5-32 tires ✔ 18.4-26 tires ✔ 17 ft unloading auger ✔ Factory grain bin extension ✔ Straw chopper ✔ Chaff spreader ✔ 2 WD live front axle ✔ Conventional walker configuration ✔ Rasp bar cylinder Key specs: Engine power: 190 hp Engine hours: 4,950 hr Operating weight: 9,190 kg (20,260.5 lb) Grain tank capacity: 7,164 L (203.3 bu) Unloading rate: 2.6 bu/sec (90.4 L/sec) Unloading auger length: 17 ft (5.2 m) Fuel tank: 530 L Engine displacement: 7.6 L Combine type: Corn/Bean, Walker (conventional) Fodpfx Afez Ebxyoujpn Dimensions (L × W × H): 9,728 × 4,572 × 4,089 mm What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 4,260 h, power: 248.6 kW (338.00 HP), color: green, total height: 4,500 mm, total length: 8,500 mm, total width: 3,700 mm, 2011 | John Deere 9670 STS | Used Combine Harvester | 4,260 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Rotary combine harvester with a 338 hp diesel engine, 10,572 L grain tank, 22.5 ft unloading auger, extended wear round bar concaves, extended separator package, and Sidehill Performance Package. Equipped with duals and a high-torque variable-speed feederhouse drive. ✔ 2WD ✔ 520/85R38 duals ✔ 18.4 x 30 tires ✔ High-torque variable-speed feederhouse drive ✔ Extended wear round bar concaves ✔ Extended separator package ✔ Deep tooth adjustment ✔ 22.5 ft unloading auger ✔ Sidehill Performance Package ✔ Chopper ✔ Duals Key specs: Engine power: 338 hp Engine hours: 4,260 hr Operating weight: 14,815 kg (32,661.5 lb) Grain tank capacity: 10,572 L (300 bu) Unloading rate: 116 L/sec (3.3 bu/sec) Unloading auger length: 6.9 m (22.5 ft) Fuel tank: 946 L Engine displacement: 9.0 L Emission standard: Tier 3 Combine type: Corn/Bean Separator type: Rotary Chaffer area: 1.9 m² Sieve area: 1.6 m² Fedpfx Afoz Ekpzeuspn What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support ✔ Secure transaction on every purchase

Condition: new, Year of construction: 2025, functionality: fully functional, Hydraulic log ladder, for log diameters from 7 cm to 66 cm. Fodpfsv N Eiqsx Afuspn

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Fedpfoz Izqujx Afuepn Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 6,000 rpm, bar passage: 65 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Tool turret Number of turrets: 3 Tool holder: VDI 25 W-gear Main and counter spindle Main and counter spindle speed: up to 6,000 rpm Bar diameter: 65 mm MACHINE DETAILS Fpodez Ibf Eepfx Afuen Coolant tank: 600 l Coolant pressure: 8 / 18 bar EQUIPMENT Gantry removal device Hainbuch HS Axzug / GS Axfix Chip conveyor Coolant tank with strainer basket Coolant pump Coolant cooling unit FMB Turbo 10-65, 3-meter bar feeder

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 2,100 mm, travel distance Y-axis: 720 mm, travel distance Z-axis: 600 mm, controller manufacturer: Siemens, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 2,100 mm Travel range, Y-axis: 720 mm Travel range, Z-axis: 600 mm Fjdpfoz Irphsx Afuepn Table size: 2,800 × 650 mm Rapid traverse rate, X-axis: 30 m/min Rapid traverse rate, Y-axis: 30 m/min Rapid traverse rate, Z-axis: 30 m/min Spindle speed: 8,000 rpm Tool holder: ISO 40 Tool capacity: 30 MACHINE DETAILS Control system: Siemens Coolant pressure: 25 bar EQUIPMENT High-pressure coolant system through the spindle and at the flange side Additional coolant tank Chip conveyor with scraper belt