Used Yanigav Auger for sale (384)

Condition: used, Year of construction: 2001, Wood chip heating system Binder RRK 640 - 850, output 850kW, year of manufacture 2001, underfeed combustion system, including feeding auger with backfire protection, including fuel transport auger, including cyclone separator for fly ash, including return line booster (boiler pump and mixing valve), including control system, system fully functional, dismantling must be carried out by the buyer, system is located on the ground floor, can be rolled out as a single unit, forklift available. Nsdpfx Abovgcqyjzjcw

Condition: used, Year of construction: 2012, Overview  This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data  - Capacity: 20 hL gross / 18–19 hL net - Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool - Max. mash load: 600 kg - Average efficiency: 83% - Average lautering time: 2 hours - Heating system: Double steam jacket (lateral + bottom, independent) - Max. pressure: 3 bar - Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperature control, programmable mash recipes - Monitoring: PT100 temperature probes in Mash/Boil and heat exchanger outlet - CIP: Spray balls in Mash and Lauter vessels - Safety: Pressure relief valve in Whirlpool - Other features: Auger feed connection, operation manuals included Scope of Delivery  - Brewhouse | Schwarzenbeker | 20 hL Brewhouse | 2012 | 2-vessel system, steam-heated, PLC automation - Steam Generator | Teivy | Biomass Steam Generator | 2012 | Pellet-fired, fully functional - Malt Mill | Robix | Roppi-1100 | 2012 | Incl. metal detector magnet - Plate Filter | Cespedes | – | 2013 | 50–98 plates, adaptors included, no pump Njdpfxeyb S Ege Abzjcw  

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquette Press! Top condition! Like new! Available immediately! Ncedpfx Abjy Af T Iozow Private sale (no VAT can be declared)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation and offers high energy efficiency as well as a compact design for easy integration into existing plants. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput rate: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil capacity: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm Briquette length is adjustable and can be regulated via the feed auger's speed. Depending on the feed material rate into the pressing chamber, the briquette length will vary. The control is managed by a time relay in the control cabinet, which determines the running time of the feed auger's motor. The machine has seen little use and is in very well-maintained condition. Sale due to underutilization. Trial run on-site possible. Loading on-site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if needed. The integrated hydraulic system is equipped with automatic oil preheating and oil-cooling function. This ensures an optimal temperature range of the hydraulic oil, even at low ambient temperatures or during continuous operation. This allows reliable 24/7 continuous operation of the machine. The price is set fairly considering the condition and very low operating hours. Inspections can be arranged at short notice by appointment. If interested, I look forward to your message.

Condition: used, empty load weight: 9,210 kg, maximum load weight: 2,790 kg, overall weight: 12,000 kg, first registration: 12/2014, wheelbase: 1,250 mm, Year of construction: 2014, power: 90 kW (122.37 HP), gearing type: other, driver cabin: other, Equipment: cabin, compressed air brake, crane, front power take-off, German vehicle, first owner, complete service history, full documentation for the crane and shredder, previously owned by a municipality, Dücker Mix Shredder DMS 500, Crane Kesal 204 T, very rare model with protected operator cabin, capable of operating in all weather conditions, crane length 6.15 m, 1 hydraulic extension, lifting capacity of 450 - 1,150 kg, 5th and 6th control circuits, 2 hydraulic outriggers, 2 transport augers, rotary servo Finn Rotor, grapple Kesla, Dücker Mix Shredder with 5 m³ container, 1 shredding auger, up to 20 m³/h throughput of finished material, discharge conveyor belt hydraulically adjustable, maximum stacking height 2,000 mm, central lubrication system, rotating beacon, work lights, air brake, 25 km/h and 80 km/h approval, PTO drive 1000 rpm from 90 kW, fixed drawbar, optional 40 mm eye or agricultural K80 trailer coupling, overall length 7,600 mm, overall height 3,850 mm, gross vehicle weight 12,000 kg, tare weight 9,210 kg, payload 2,790 kg. If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV (German Social Accident Insurance) certificate, new SP (safety report), or new UVV (accident prevention regulations) certificate. Ncsdpfszh Nx Aox Abzsw You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer an inspection and evaluation of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and evaluations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to changes, prior sale and errors.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: PV10150642, MACHINE SPECIFICATION Table size 1200 x 480mm X axis traverse 1050mm Y axis traverse 540mm Z axis traverse 560mm Spindle nose to table 80 – 640mm Spindle BT 40 Spindle speeds 20 – 10,000rpm Spindle motor 15kW Rapid feed rate X/Y/Z 32/32/24m/min Toolchanger capacity 24 Tools Approximate weight 6600Kg MACHINE EQUIPPED WITH: - Siemens 828D CNC control Swarf auger Ncjdpfx Ajzguf Sobzew Coolant system Lighting Guarding

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), fuel type: diesel, fuel consumption per hour: 4 l/h, color: orange, operation weight: 1,550 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: adjustable chassis, air conditioning, cabin, parking heater, rubber tracks, The SE18 mini excavator, belonging to the 1.8-ton class, impresses with its compact dimensions, powerful performance, and high-quality equipment for professional use. Equipped with the proven Kubota D902 diesel engine, modern hydraulics, a comfortable fully enclosed cab with air conditioning, a heating function with remote control, and a comprehensive set of buckets, this machine is ready for immediate use. Whether in civil engineering, gardening and landscaping, municipal applications, or on confined construction sites – the SE18 offers maximum flexibility, high reliability, and excellent value for money. ✅ Key Features at a Glance ✅ Kubota D902 3-cylinder diesel engine – reliable, fuel-efficient, and durable ✅ 1,550 kg operating weight – compact, stable, and powerful ✅ Fully enclosed cab with ROPS/TOPS – CE-certified and safe ✅ Air conditioning with heating function and remote control – comfortable operation in all seasons ✅ 2 auxiliary hydraulic circuits – suitable for hammers, grapples, earth augers, and more ✅ Adjustable undercarriage 1,000 – 1,250 mm – perfect for confined construction sites ✅ Side-swinging boom left/right – precise operation near walls, edges, and obstacles ✅ Mechanical quick coupler included ✅ 3 buckets included in the set ✅ Immediately available – delivery possible 🔧 Technical Data Model: SE18 Class: 1.8 t mini excavator Operating weight: 1,550 kg Engine: Kubota D902, 3-cylinder diesel Power: 11.2 kW Undercarriage: Rubber tracks, 230 mm Adjustable undercarriage: 1,000 – 1,250 mm Blade: 1,100 mm Boom: Side-swinging left/right Pin diameter: 25 mm Auxiliary hydraulics: 2 auxiliary circuits Fully enclosed cab, CE-certified, ROPS/TOPS Air conditioning with heating function, opening front window, sliding side window Included in the scope of delivery: ✔ Digger bucket 30 cm with teeth ✔ Digger bucket 50 cm ✔ Digger bucket 80 cm ✔ Mechanical quick coupler ✔ Hydraulic thumb / grapple thumb ✔ Air filter ✔ Fuel filter ✔ Oil filter ✔ Tool box ➡️ Get in, start, and work – the machine is ready for immediate use. 🛡️ Safety & Certification Nodex H Tirjpfx Abzjcw The machine is CE-certified and complies with the relevant European directives: ✅ 2006/42/EC – Machinery Directive ✅ 2014/30/EU – EMC Directive ✅ 2011/65/EU – RoHS Directive The cab is equipped with a ROPS/TOPS safety structure and offers the operator protection, a clear view, and comfort. 🧰 Service & Warranty ✅ 12-month warranty throughout Europe ✅ Spare parts available directly from stock ✅ Service and advice from Rheda-Wiedenbrück ✅ Inspection and testing on site possible 🔥 Summer promotion price only €11,890 net – complete set included! 📍 Location: Rheda-Wiedenbrück, Germany 🚚 Delivery possible ✅ Immediately available ✅ Machine is ready for use Our machines can be inspected and tested on site. Contact us for more information, a customized offer, or a short-notice inspection.

Condition: used, Year of construction: 2023, machine/vehicle number: ET195, Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates, motors, boards, and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type. complete overhaul of the glue group for the l-shaped seal for the PE labelers review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of: auger entry/exit star counter star 11. one seal format per glue group for adhesive rotary labeling up to 6000 complete with: 1 warehouse 3 blades 1 hook drum Nsdpfx Asvlnv Eobzjcw Delivery time equipment of the Used adhesive labeling machine overhauled: This PE labeler can be serviced and delivered in approximately 90 working days from the order and payment of the first deposit. It is important to approve all technical drawings and label measurements for the PE labelers. This allows orders for replacement materials for the PE labelers to be prepared in an efficient time. In this particular historical period, we encounter very long delivery dates for electrical materials. Is for this reason that it is very important to plan the entire project in the correct direction to avoid wasting time for the PE labelers overloaded. For the installation of the PE labelers we only use our own direct workers, to give safety to our customers. We follow the entire process from start to finish and to the commissioning of the new or used machinery.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams Ncsdpfx Aewymlyobzjw - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. Ncodozd Dfispfx Abzow For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, VEMAG HP30E | Vacuum filler with chopper and loading system Manufacturer: VEMAG Maschinenbau GmbH Model / Type: HP30E Power supply: 400 V / 50-60 Hz / 3 phases Hopper capacity: 350 liters Ncedpfx Aoziqr Tebzjw Filling capacity: Up to 8700 kg/h Portioning range: From 1 to 99,999 g Portioning speed: Over 600 portions/min The VEMAG HP30E is one of the most powerful and reliable vacuum fillers in the industrial class, designed for continuous, high-performance operation in large meat processing plants, slaughterhouses, delicatessen facilities, and large-scale catering operations. Thanks to the use of a unique dual auger technology (VEMAG Duo-Drive), the raw material is handled extremely gently, which eliminates stress on the meat structure and guarantees a perfect, clear cross-sectional appearance of the finished product. A key advantage of this unit is its integration with a filling chopper. This system allows for simultaneous final comminution of the product to the desired granulation and removal of hard particles (tendons, cartilage) just before the portioning process. The machine performs excellently not only in the production of raw, scalded, or baked sausages, but also in the precise dispensing of meat mixtures, pet food, and other thick food products directly into packaging lines or clipping machines.

Condition: excellent (used), CATALOG NUMBER 6114 TECHNICAL DATA - Loading hopper inlet: 800x1000mm - Rotor working width: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Knife dimensions: 30x30mm - Screen: 0.8x10mm Nedpfx Aozh H T Debzecw - Pusher drawer - Electric auto-reverse - Discharge augers 2×1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg – German-made – Auto-reverse – Pusher drawer – Unpainted – Very good condition – Used shredder Net price: 59,900 PLN Net price: 14,260 EUR (depending on the exchange rate, 4.2 EUR) (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 2006, Doosan Puma 240B CNC Lathe (2006) With Dusan Fanuc i-Series Controller Ncjdpezpaxcefx Abzow Bar feeder and chip auger Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale.

Condition: used, Year of construction: 2007, Haas VM-2 CNC Vertical Machining Center (2007) Nedpfxozpattj Abzocw With 24-Tool ATC and chip auger Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale.

Condition: good (used), Stainless steel pipe threaded screw conveyor screw auger Diameter 270mm Length 2400mm Motor power 2.2kW Entirely stainless steel Nsdowyf N Dopfx Abzscw See our other advertisements.

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ. 1) Bale shredder MHB: Special price from €24,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency inverter (FU) - this regulates the speed of the scraper bed. The bales are placed on the scraper bed and the feed of the shredder is activated. The shredder's tines tear the straw from the bale and fling it into the hopper. Ideally, the combination of a bale shredder and a straw shredder offers the best solution. Technical data, bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the sieve size used in the straw mill, kW number of the straw mill). Without a straw mill, the bale shredder can process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (L x W x H) Shredder motor: 5.5 kW, 380 Volts Scraper bed feed: 0.75 kW, 380 Volts Dimensions: 3750x1730x2460 mm (L x W x H) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; immediately available Special price from €6,995 net Additional cost for the even larger straw shredder (18.5 kW): €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm hole size With star-delta switch, overload protection and 8 m power cord, ready for connection Discharge spout: 160 mm Throwing distance approx. 12 m Dimensions approx. 1600 x 1020 x 1360 mm (L x W x H) Weight approx. 240 kg --- Options at extra cost: Feed auger: + €970 net Cyclone separator (mounting by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstration unit) + from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: from €1,620 net Special shredder extension, 3 m *other sizes can be calculated + €9,750 net Briquetting press MPP 180 S; little used demonstration unit 70 mm briquette - up to a maximum of 100 kg/h from €39,700 net * larger machines on request Njdpfx Abjb Nulhjzjcw --- Description: The muetek bale shredder has been developed for shredding round and rectangular bales of hay and straw. The shredder attached to the bale shredder shreds straw from all types of cereals, hay, corn and miscanthus. The muetek machines of the MHZ / MHB series are characterized by a robust construction and solid design. The muetek bale shredders of the MHB series are equipped with a chain conveyor, on which the straw bale is placed with a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredder rotor, and the feed speed is adjustable. The shredder rotor is equipped with several teeth, which tear open the straw bale. The straw separated from the bale is ejected. --- In principle, the machines work for dry source materials: - Straw - Hay --- Shredding hemp only works with a special shredder Additional cost approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the source material: Moisture content max. 12%

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 661 mm, travel distance Y-axis: 407 mm, travel distance Z-axis: 508 mm, table load: 1,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, tool weight: 7,000 g, number of axes: 3, This 3-axis Hurco VM10i was manufactured in 2016. It features an X-axis travel of 661 mm, Y-axis travel of 407 mm, and Z-axis travel of 508 mm. The machine includes a robust table size of 762 x 406 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VM10i vertical machining centre we have for sale. Contact us for further details. • CNC Control: HURCO MAX 5 (WinMax software version V10.01.131.12) • Table Dimensions: 762 x 406 mm • T-Slots: 3 x 18 mm • T-Slot Center Distance: 10 mm • Spindle Nose to Table Distance: 102 - 610 mm • Spindle Torque: 72 Nm • Rapid Traverse (X/Y/Z): 28,000 mm/min • Tool Magazine Capacity: 24 positions • Maximum Tool Diameter (Adjacent Occupied): 80 mm • Maximum Tool Diameter (Adjacent Empty): 120 mm Ncsdpfezgf Htjx Abzsw • Maximum Tool Length: 250 mm • Machine Working Hours: 15,420 h 10 min • Spindle Hours: 2,727 h 59 min • Monitor: 19" Touch Screen • Hardware: 128 GB SSD, 4 GB RAM, Dual-Core 2.7 GHz Processor • Connectivity: 2x USB 2.0 (console), 2x USB (electrical cabinet), 1x Ethernet LAN Additional equipment • Remote electronic handwheel • Auger-type chip conveyor • Wash gun (water/air) • Status tower lamp • Retention knobs • Leveling pads Technical Specification Taper Size ISO 40

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 8.9 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 533 x 406 483 [mm] - Rapid traverses rates (X/Y/Z) : 24 [m/min] - Distance table / spindle nose (min./max.) : 36-519 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 198 [mm] - Maximum weight upon table : 150 [kg] * Distance table / spindle nose (min./max.) : 36-519 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2994 x 2666 mm [mm] - Machine height : 2669 [mm] - Machine weight : 3360 [kg] MACHINE HOURS - Number of working hours : 22000 [h] EQUIPMENT - CNC : HURCO WINMAX V09.01.393.24 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : HURCO * travel 4th axis : -30 / +110 [°] * indexing precision 4th axis : 0,001 [°] * travel 5th axis : 360 [°] * indexing precision 5th axis : 0,001 [°] - Coolant tank * with high-pressure pump : 20 [bars] Nsdpouhbubofx Abzscw - Coolant through spindle - Chip auger - Tool probe : Renishaw NCRTX/RX

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request Ncsdpfxozcf Dls Abzjw 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: ready for operation (used), Year of construction: 2023, Sale only to commercial customers. The purchasing company must disclose its ultimate beneficial owners, and the individuals signing the agreement must undergo postal identification or have their ID photographed on site. The price applies to one (1) earth auger and one (1) compressor!!! Ncodpfxozgb Elo Abzew A total of two sets are available for sale, each consisting of one Grundomat earth auger and one compressor. In addition, each set includes one 4 mm pull rope (15 m), one PVC pipe clamp, one compressed air hose (15 m), one fog lubricator (3.3 L), and one Grundoscope including a 2 m guide rod. The items can be inspected on site by appointment, and the compressors can be tested.

Condition: used, Year of construction: 2023, functionality: unexamined, Mespack H-140S powder sachet machine (2023) Nodpfxszbc Ews Abzscw 5g-100g, up to 100 sachets per minute With hopper, auger and ICE Zodiac printer

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Ncodpfx Abszdrufezew

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder Ncedpfxjzf E Hqj Abzew LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, Year of construction: 2009, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 6290309, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, Model X 3100 - HEIDENHAIN iTNC 530 path control - Max. spindle speed 4,000 rpm - Table length 3,600 mm - Table width 1,050 mm - Max. table load 8,000/13,000 kg - Y-axis 1,250 mm, extended travel - Z-axis 1,600 mm, increased column height, vertical travel 1,600 mm - Table extension to 1,050 mm - Universal automatic milling head A 4, universal bi-rotating automatic milling head - Vertical tool changer, 24 positions, incl. spindle orientation - CTS (coolant through spindle), 2 pumps - Preparation for 4th axis Ncsdjxp I Swopfx Abzjw - Full-width chip augers front and rear - High-performance hinged belt chip conveyor - Full machine enclosure

Condition: new, functionality: fully functional, power: 8.2 kW (11.15 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 0.8 l/h, fuel tank capacity: 10 l, color: blue, operation weight: 978 kg, lifting power: 250 kg/m, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, shovel volume: 0.014 m³, digging bucket width: 300 mm, brakes: engine braking, Year of construction: 2025, operating hours: 1 h, Equipment: CE marking, additional headlights, adjustable boom, adjustable chassis, gripper hydraulics, hydraulics, rubber tracks, standard shovel, tilting carriage, The RIPPA R10 1T mini excavator is an excellent solution for yard work, leveling ground, small excavation projects, preparing foundations, and property maintenance. _ Technical specifications: Weight: 978 kg Bucket capacity: 0.014 m³ Dimensions: 2430 x 912 x 2201 mm Digging depth: 1833 mm Hydraulic flow: 18 l/min Engine: KOOP diesel, 1 cylinder, 8.2 kW Optional engine: Kubota Z482 diesel, 2 cylinders, 8.2 kW - €1500 + VAT Hidden hydraulic motors Extendable tracks Joystick control Swivel boom Hydraulic bucket thumb Quick coupler 10 available attachments (buckets, augers, forks, etc.). _ Price and conditions: Nodpfx Absxr Aivszecw €5000 + VAT Warranty: 12 months or 1,500 engine hours Delivery: FREE throughout Lithuania within 7-10 business days Delivery is also available throughout Europe.

Condition: excellent (used), Year of construction: 2011, YEAR OF PRODUCTION: 2011 Technical specifications. - Basic machine Longitudinal stroke X = 700 mm Vertical stroke Y = 650 mm Transverse travel Z = 700 mm - Tool magazine with 295 tool places HSK A63 - Continuous rotary table at 360,000 divisions 65 rpm - 7-position multi-pallet from mm.500 x 500. Rotation footprint dia. 800 mm. - Allowable load on each pallet table kg 550 - No.01 Operator's station for loading/unloading workpieces - Spindle speed = 12,000 rpm - Refrigeration unit for conditioning the spindle cartridge - Spindle with provision for coolant supply through tool flange - Air-conditioned electrical control unit with air conditioner - Ecological protection working area and machine - Lamp for work area lighting - Scraping chip conveyor with rear exit - Chip evacuation augers - 750-l coolant collection tank with self-cleaning filter system; - Sealed top guard prepared for connection with centralized fume extraction system - CNC FANUC 16 I Options included - C301 Piece Washing - C303 Tool Cone Washing Ncodpfx Ajuz Urpsbzow - C410 Tool Monitor MCM - C305 Oil Remover - C333 Automatic coolant filler - C308 High pressure 65 Bar - C403 Tool Presence Control By Laser - C412 Balluff read/write system with JTERM-01 - C408 Marposs radio-frequency touch probe MIDA T36 - jFMX MCM supervisory system including Network Part Program