Used Zagro Pit Frame Jack for sale (13,616)

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control Lasdpfx Ahjk S Htxjaoh - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Ljdslqxg Hspfx Ahasah Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Condition: used, Hydraulic punching machine, punching frame for use with JOKA HP-S punching units Hydraulic hole punching machine, hydraulic press for punching tools Year of manufacture approx. 1995 Pressure capacity: 5 tons Stroke: 155 mm Stroke length: approx. 20 mm Laodsltrmuspfx Ahaoh Punching unit width: max. 54 mm Punching unit height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Mains connection: 230 volts, 50 Hz - for universal use with JOKA SW 20 or SWD 20 punching units - The outreach of the punching units can be larger and can be pushed back - Stroke activation via electric two-hand operation - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/400-1 - mounted on a frame base, mobile Space requirement L x W x H: 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, machine/vehicle number: 151, empty load weight: 6,615 kg, maximum load weight: 27,385 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 10/2004, loading space volume: 53 m³, suspension: air, tire size: 385/65 r 22,5, color: white, Equipment: ABS, * Disc brake * EBS (Electronic Braking System) * Wheelbase 1,330 mm Ledslpal Dopfx Ahaeah * Aluminum frame * Lifting and lowering mechanism * Hydraulic rear support * BPW axles * Alcoa aluminum rims Next internal inspection: 09/2025 Errors and omissions excepted.

Condition: used, Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley Laodpfx Asdpyzkjhaoh -with: cable -Load capacity: kg -Projection: 2,000 mm -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. Lajdpfjyuxkox Ahaeh > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) working space as frame press (w / h in mm): 2700 x 1800 working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto

Condition: used, Pressure: 300t Lsdpfxo Dvatj Ahajah Length of stroke: 500mm Up table size: 1760x1200mm Down table size: 1760x1200mm Back pressure: 100t Weight: 33000kgr New hydraulic and electric systems EXCELLENT CONDITION

Condition: used, machine/vehicle number: 478, pression: 36 t Ljdobb Tguspfx Ahaeah max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg

Condition: new, Year of construction: 2024, total height: 2,100 mm, lifting height: 2,200 mm, empty load weight: 3,000 kg, load capacity: 4,500 kg, Lifting frame for timber packages 1200 x 1200 3000 - 6000 mm 5 lifting arms Ljdpfor Ddbgox Ahasah Max. load 4 to Dimensions width: 2500 mm length: 5000 mm height 2100 mm Stroke: from 550 - 2200 mm Gear motor 400 V 3 KW

Condition: excellent (used), 2 support legs for Esterer gate type EHD 30. Used for only 6 years. Support legs and spare parts are also available for other Esterer gate types. Lajdpfoip Uf Ujx Ahaeh

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine Ljdpfxeh Uhqyo Ahaoah - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Lsdpjuqc Hfofx Ahaeah Standard configuration Extended machine accessories Press body can be tilt

Condition: used, Year of construction: 2023, Movable lifting frame, manual trolley, rolling trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Lifting capacity: approx. 5,000 kg -Condition: unused, without control -Year of construction: approx. 2023 -Track gauge chassis: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -vertical travel: approx. 1330 mm -Lifting drive: by gear/rack -Drive chassis: 2x SEW gear motor KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW -Hollow shaft diameter: Ø 40 mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Wheels for rail system: made of steel, 90 mm wide, with adjustable guide -Drive hoist: 1x SEW gear motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm Ledpfsucaimex Ahajah -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Overall dimensions: 4725 / 2000 / H2420 mm -Total weight: 2000 kg

Condition: excellent (used), C-Frame Press, Electric Press, Servo Press, Electric Press Tox Ecoline CMB008.407.A.001, Tox Ecoline CMB008.407.A.001, Used Machine Manufacturer: Tox Model: CMB008.407.A.001 (Ecoline) Year: 2011 Weight: 900 kg Overall Dimensions: 1250 x 1400 x 2610 mm Pressure: 5500 kg Laodpfx Aeuccicshash Stroke: 300 mm Max Speed: 200 mm/s We are offering a high-quality servo press that is the ideal solution for all precision and high-performance industrial tasks. This press provides exceptional advantages in both productivity and quality, making it the perfect choice if you are looking for a reliable, energy-efficient, and cost-effective solution. High Precision: The servo press ensures precise control, allowing for repeatable and accurate operation, with tolerances down to micrometers. Energy Efficiency: It consumes significantly less energy compared to traditional hydraulic presses, enabling more cost-effective long-term operation. Quiet Operation: Operates with low noise levels, creating a more pleasant working environment. Flexible Application: Versatile use across various industries, from automotive to fine mechanics. Programmable motion profiles allow for quick and easy reconfiguration for different tasks. Maintenance-Friendly: Minimal maintenance requirements, a reliable, long-lasting machine that leads to less downtime.

Condition: good (used), 21-26- Hydraulic press KALLESOE (used) Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Lajdpfxjuctlnj Ahaoh Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), Year of construction: 2007, Window fitting press Lodpfx Ahet T Srpjasah

Condition: used, Schließrahmen - Frame KS Letter Press Heidelberg KS-8 Frame KS Cylinder Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Lodpjrffmtsfx Ahajah

Condition: used, Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4-4 Frame SBG Cylinder Online-Video-Inspection by Skype-Video Lsdperffm Tofx Ahajah We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, In good condition Lsdpfx Aeq Tn Nuohaeah Workbench area 2450x1000 mm Number of pressed parts: 3 The area of the pressed part is 800x1000 mm Maximum working height 500 mm Transport dimensions 2700x1000x1800 mm Weight 1055 kg Price 1100 Eur (EXW Jonava, Lithuania)

Condition: used, functionality: fully functional, machine/vehicle number: 2496288, Year of construction: 2020, load capacity: 227 kg, lifting height: 3,650 mm, fuel type: electric, overall weight: 864 kg, color: red, tire size: 12x4x8, platform length: 850 mm, platform width: 690 mm, transport length: 1,370 mm, transport width: 770 mm, transport height: 1,790 mm, Equipment: UVV, Technical data Year of manufacture: 2020 Working height: 5.65 m Platform height: 3.65 m Platform dimensions (L x W): 0.85 m x 0.69 m Overall dimensions (L x W x H): 1.37 m x 0.77 m x 1.79 m Load capacity: 227 kg Total weight: 864 kg Drive: DC power supply 24V Gradeability: 30% Turning radius (outside): 1.40 m Travel speed: 0.80 - 4.0 km/h Tyres: Solid rubber Lajdpfx Aheyx S Ecjaoh UVV, fully functional, normal signs of use

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m Lsdpfezpzblsx Ahajah weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 140 h, machine/vehicle number: 60005678, load capacity: 408 kg, empty load weight: 1,967 kg, transport length: 2,320 mm, transport width: 840 mm, construction height: 2,290 mm, fuel type: electric, Equipment: UVV, Skyjack SJIII 3220 – electric scissor lift Laodoyzdlgjpfx Ahajh Year of manufacture 2015, 140 operating hours, serial number 60005678. Working height approx. 8 m, load capacity 408 kg, weight 1967 kg. Dimensions L x W x H: 2.32 x 0.84 x 2.29 m. Electric wheel drive (2WD). Batteries, service, and SUVA check have been renewed according to the offer. Please confirm the inspection date, scope of inspection, and agreed services for the specific machine. Purchase price EUR 8550 net, plus applicable VAT. Transport costs are separate and will be quoted. Availability and condition will be confirmed in person. Inspection and collection in Ringgenberg by appointment.

Condition: defective spare-parts repository (used), Electric pallet truck with tiller, Jungheinrich, Ameise EJE 222 – used, defective battery - : Price on request! Manufacturer: JUNGHEINRICH Model: Ameise EJE 222 (defective battery) Serial number: 90106944 Year of manufacture: 2004 Rated capacity: 2,200 kg Unladen weight without battery: 380 kg 24V, 1.5kW Battery weight: 171 / 263 kg Operating hours: 7,255 h Lift height: 130 mm Fork length: 1,150 mm Vehicle weight: 643 kg Lsdpfeyzfncox Ahaoah Condition: good Available: immediately Location: 97828 Marktheidenfeld

Condition: used, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 2430288, load capacity: 408 kg, mast type: telescopic, lifting height: 5,950 mm, platform length: 2,100 mm, platform width: 700 mm, overall weight: 1,967 kg, transport length: 2,320 mm, transport width: 840 mm, transport height: 1,750 mm, fuel type: electric, tire size: 16 x 5 x 12, color: red, Technical data Year of manufacture: 2022 Engine: Electric Working height: 7.95 m Platform height: 5.95 m Platform extension: 0.91 m Platform dimensions (L x W): 2.10 m x 0.70 m Overall dimensions (L x W x H): 2.32 m x 0.84 m x 2.10 m Weight: 1,967 kg Max. payload: 406 kg Load capacity with weight distribution: 272 kg Lajdjzmf E Nspfx Ahash Driving speed: 0.9 km/h – 3.4 km/h Max. gradeability: 25% Fully functional General used condition Delivery optional Rental optional

Condition: used, empty load weight: 7,080 kg, maximum load weight: 26,920 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 11/2014, next inspection (TÜV): 12/2026, total length: 25,500 mm, total width: 40,000 mm, total height: 132,600 mm, suspension: air, tire size: 385/65 R 22.5, Year of construction: 2014, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, brakes: other, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW, color: grey, suspension: air / air, brake: disc brake, fixed side impact protection, 2 storage compartments, electric hydraulic unit, conduit holders on the left and right, load gauge, hydraulic rear support, 2 reversing lights, work lights, pneumatically folding walkway, 5 wheel hub covers. Lasdpsz D I Raefx Ahaoh