Used Zopf Kb 100 for sale (24,537)

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: BB 60, Tube Bender BB 60 without mandrel with one set of tooling 60 mm radius ca. 175 mm with counter rollers - model BB 60 - capacity up to 60 x 3,6 mm (mild steel) round tube mild steel - digital readout Lrsdpfx Ajd Eywyskyen - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 3 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 400 kg - 400 volt 50 Hz 3 ph.

Condition: new, Year of construction: 2024, Ring Rolling Machine Zopf - Model ZB 60/3 MD - year of construction 2024 - motorized Lrsdsgh T Hkepfx Akyjn - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 900 mm with - year of construction 2023 - demo model - length of stroke 185 mm Ledpfjgrydbex Akysrn - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge demo model

Condition: new, Year of construction: 2024, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Lsdpedktnkefx Akyorn

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable Lrsdpsdk H A Isfx Akyon - maximum bending high 300 mm - motorcapacity 5,5 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf Lrsdjdy Igzspfx Akyjn - model T 200 - year of construction 2024 - demo model - length of stroke 185 mm - weight 450 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: new, Year of construction: 2023, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder Ledpfx Aodkxkxokyorn - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 °

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm Lreded A Nb Hopfx Akyjn -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: ready for operation (used), 100,000 liter stainless steel tank, insulated It has a heating coil running along the entire height of the tank Wed. 3.15m Lrodpfx Aen E N N Eskyon Height 16.50m

Condition: used, 🧰 Product Features • Condition: Used item, see photos • Colour: grey Ledpfjvb T Ewsx Akyern • Material: metal • External dimensions: 124 x 83.5 x 97 cm • Load capacity: 1000 kg • Stack load: 5000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal floor with wooden insert 💰 Price €99 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: by appointment at any time Over 5000 linear metres of pallet racking from numerous manufacturers constantly in stock (Subject to changes and errors in technical data, specifications and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: used, Tank capacity (litres) 100 Motorized pumps Up to 2 external each tank Lodpfovpfhyex Akyorn Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand Ljdpfx Akshkhumeyern The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Ljdpfezb Iihsx Akysrn Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, machine/vehicle number: 008108, Max width workable: 1050 mm Max length workable: 2400 mm Max height workable: 250 mm Lsdpfew Iddujx Akysrn

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Lodpfx Aswcfgbokyorn Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service. Lsdpfxjgay Uds Akyorn

Year of construction: 2023, condition: new, SEMIX Mobile 100S4 is equipped with 3000/2000 liters capacity Concrete mixers which can be a single shaft, twin shaft, or planetary type mixers. In SEMIX Concrete Mixers NiHard4 or Hardox 450 wearings are used according to the Concrete recipe’s sillicium ratio. All SEMIX Aggregate Storage hoppers are bent trapezoidal shape for having an extra strength. Aggregate storage hoppers can be fed by wheeled loaders with a single ramp. Aggregates are weighed in the weighing conveyor which transfers aggregates to the transfer conveyor. Having two separate conveyors providing accuracy in weighing and performance for reaching higher Concrete outputs. Lrsdpfsgay Uhjx Akysn All SEMIX Concrete Batching Plants are being controlled by a SCADA system with a Schneider PLC integrated. Users can follow all used materials and integrate it their CRM system. SEMIX's engineering team can intervene in the Automation system online to provide service.

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm Lodpfx Aksv Ehbbjyorn and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Ledszfh U Depfx Akyjrn Type Of Ribbon: Single

Condition: excellent (used), Limitech Multi function mixer. In excellent condition, perfect for baby food, ready meals, mayonnaise, mashed potato, processed cheese etc. Full spec to follow. Lodjuyvfzopfx Akyern

Condition: used, Year of construction: 1988, Manufacturer : Comber Lodpfx Akezg Nc Sjyjrn Model: Pharmadry PH 100 Year : 1988 Type : vacuum dryer   Maximum temperature: 99°C Material: 304 and 316 stainless steel (in contact with product). Classification: Atex EEx IIB T4   Main tank diameter : ø 500 mm Main tank depth: 700 mm Power: 4 HP Filter Pressurised receiver tank Tubular heat exchanger   Gaskets: new Paint: new Mechanical seal: As is, good condition

Condition: used, Polished stainless steel tank Capacity 100 litres Variable speed agitation: double propeller Ledpfxszg Nads Akyorn Dimension d.480 x pf 580 Full opening Lid with counterweight Stainless steel valve 1 bar Double jacket with cooling unit. Mobile frame on wheels Dimensions 1300 x 800 x 2100

Condition: good (used), Year of construction: 2006, load capacity: 1,000 kg, lifting height: 1,580 mm, fuel type: electric, construction height: 2,000 mm, expected Lredpfxozg I Iaj Akyjn Electric stacker Brand: BT Year of manufacture: 2006 Capacity: 1,000 kg Lifting height: 1,580 mm Mast height: 2,000 mm Battery: 2 x 12 volt with charger Video to follow.

Condition: used, mileage: 403,430 km, power: 110 kW (149.56 HP), first registration: 06/2002, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,100 mm, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 6,200 mm, total width: 2,300 mm, total height: 3,000 mm, Year of construction: 2002, Equipment: ABS, electric window regulation, = Further options and accessories = - Spare wheel - Headlights Ledpjzgrmgsfx Akyern - Toolbox = Further information = Tyre size: 215/75R17.5 Brakes: Disc brakes Front axle: Steered; Tyre tread left: 5%; Tyre tread right: 5%; Suspension: Leaf spring Rear axle: Twin tyres; Tyre tread left inner: 15%; Tyre tread left outer: 15%; Tyre tread right inner: 15%; Tyre tread right outer: 15%; Suspension: Air suspension Unladen weight: 4,360 kg Payload: 4,140 kg Gross vehicle weight: 8,500 kg Damages: none

Condition: used, mileage: 72,072 km, power: 75 kW (101.97 HP), first registration: 10/2022, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2022, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional options and equipment = - Spare key - Speed limiter - Reversing camera - Stability control - Alternating current = Notes = Car-Pass URL: Car-Pass ID: ccdee4be-31bb-48ae-a820-8a7dab568c2e = Further information = Tyre size: 205/60R16 Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tyre tread left: 8 mm; Tyre tread right: 8 mm Rear axle: Tyre tread left: 6 mm; Tyre tread right: 7 mm Lrjdpfxezgm Rts Akysn Unladen weight: 1,479 kg Payload: 911 kg Gross vehicle weight: 2,390 kg Damage: none