Used 16523 Ce for sale (9,667)

Condition: good (used), machine/vehicle number: 3145, Year of construction: 2009, load capacity: 12,000 kg, lifting height: 4,250 mm, mast type: duplex, fork carriage width: 180 mm, fork length: 2,400 mm, total length: 4,730 mm, total width: 2,650 mm, operation weight: 17,660 kg, additional equipment features: Dual tread, Front mud guards, Centralized greasing system, Manual sliding cabin, Equipment: lighting, Kalmar DCE120-6 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Iodpfx Aoyuh N Ijchsba Wheel size – Drive wheel: 12.00-20 Wheel size – Steering wheel: 12.00-20

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 5067, total width: 450 mm, total length: 500 mm, input voltage: 220 V, total height: 400 mm, cutting width (max.): 108 mm, number of blades: 2, table height: 600 mm, Equipment: CE marking, Hot & Cold Automatic Strip Cutting Machine Ibjdpfezut Axox Achea It can cut elastic, webbing (up to ¼" thick), ribbons, belt loops, hook and loop fasteners, nylon cords, leather, safety belts, rubber, and vinyl. FEEDING SPEED – adjustable up to 13 inches per second. • CUTTING LENGTH – approximately 400 ft. • CUTTING WIDTH – 4 inches. • TOLERANCE – 0.05% of the total cut length. • QUANTITY – up to 99,999 pieces. • COUNTER – pre-set up to 99,999. • SAFETY – knife cover sensor – automatic stop when the roll ends. • AUTO – feed/reverse.

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Ibedpfx Acjy R I Uqjhea Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Contact for more details or to arrange an inspection.

Condition: good (used), mileage: 96,134 km, power: 132 kW (179.47 HP), first registration: 12/2023, fuel type: diesel, tire size: 225/75R16, axle configuration: 4x2, wheelbase: 4,030 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 5, total length: 6,650 mm, total width: 2,080 mm, total height: 2,450 mm, loading space length: 3,340 mm, loading space width: 2,030 mm, loading space height: 390 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Manual - Radio/cassette player - Fabric = Notes = Configuration: 4x2, Unladen weight: 2330 kg, Gross vehicle weight: 3500 kg, Tow hitch, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette player, Carplay, Color: White, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 132 kW (177 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Roof rack: None, Side doors: 2, Rear closure: Tailgate, Central locking, Number of seats: 5, Seat configuration: 3+4, Seat upholstery: Fabric, Seat adjustment: Manual, XXL ac EURO6, Tire type: Winter tires = Additional Information = General information Number of doors: 2 License plate: KLEYN1 Iodoyyuwkopfx Achoba Axle configuration Tire size: 225/75R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 2 mm; Suspension: Coil suspension Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Weights Unladen weight: 2,330 kg Payload: 1,170 kg GVWR: 3,500 kg Functional Loading area height: 97 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial information Leasing price: 352 € per month (delivery van, 72 months); Ask for more information and conditions.

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 3,869 h, fuel type: electric, mast type: triplex, Manufacturer & Model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 Ibodpjzuufhsfx Achsa ID: 25114.5389 Category: Used Mast Type: Triplex (3F) Lowered Height: 3830 mm Lifting Height: 9800 mm Capacity: 1200 kg Platform Height: 9000 mm Order Picking Height: 10600 mm Initial Lift: Yes Cabin Width: 1300 mm Year: 2020 Operating Hours: 3869 Battery Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable Forks! - Induction / Wire Guidance

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,883 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5388 Category: Used Mast: 3F Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1,200 kg Platform height: 9,000 mm Picking height: 10,600 mm Initial lift: Yes Cabin width: 1,300 mm Year: 2020 Operating hours: 4,883 hrs Ibedpfx Aszuufbechsa Battery: 48 V / 620 Ah Options: FULL options !! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION !! – PSA – Blue spot – Adjustable forks – Induction / wire guidance

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,672 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5387 Category: Used Mast: Triplex (3F) Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Init.: Yes Cabin width: 1300 mm Year: 2020 Operating hours: 4672 hours Capacity: 48 V / 620 Ah Ibedozuud Ropfx Achoa Options: - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable forks - Induction / Wire Guidance

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,844 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5995 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1844 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture 2026 Options: Ibodpjzut U Iefx Achsa - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance In complete LIKE NEW condition.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,201 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5993 Category: Demo Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1201 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture 2026 Options: - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance Ibedpfx Aozut Uzschja In complete LIKE NEW condition

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 23123.5000 Ibedpfx Ajzut Uhjchea Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1629 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture: 2026 Options: - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance – complete, LIKE NEW!!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Condition: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Ibodpfx Ajzut T Rschea Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 hours Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING FUNCTION!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initialized: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Capacity: 48 V / 620 Ah - Year of manufacture: 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance Ibodpfx Acszut T Dshja - End-of-travel sensors on the mast

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 3483 hours Capacity: 48 V / 620 Ah - Year of manufacture 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! Ibjdpfx Acezut Twehoa - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Mast: 3F7700 ID: 23033.2653 Category: Used Ibjdszut Syepfx Achea Mast type: 3F Lowered height: 3050 mm Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Year: 2015 Hours: 2089 hours Capacity: 24 V / 775 Ah - Hoppecke Options: FULL options - Mast = Triplex FFL - Equipped with side guidance & sensors (INCLUDING side roll / wheels & sensors!!)

Condition: new, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 5,950 mm, construction height: 3,410 mm, operating hours: 3 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V (5213) Mast: 2W5950 ID: 23079.5136 Mast: 2W Lowered height: 3410 mm Ibodpfxezut Stj Achsa Lifting height: 5950 mm Capacity: 1200 kg Platform height: 5350 mm Picking height: 6950 mm Cabin width: 1200 mm Year: 2019 Hours: 3 hours Capacity: complete NEW * 48 V / 465 Ah * Year of manufacture 2026 Options: FULL options!! - SAFETY doors with TILTING FUNCTION!!! - Equipped with side guidance (INCLUDING side roll/wheels!!) Complete NEW / Unused!!!

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 850 mm, construction height: 1,380 mm, operating hours: 2,298 h, fuel type: electric, mast type: simplex, Manufacturer + model: JUNGHEINRICH ECE 310 * EX * Atex - 3G / Zone 2 Mast: 1F850 ID: 23052.5935 Category: Used Mast: 1F850 Forks: 1150 mm Lowered height: 1380 mm Lifting height: 850 mm Capacity: 1000 kg Hours: 2298 hours Year: 2017 Capacity: Complete NEW * 24v / 465ah * Year of manufacture 2026 Options: * EX * Atex - Jungheinrich !!!! System REF = E211103 / 2017 Gas = IIB Type = Cat 3G (approved for Zone 2) Ibedpfx Aezuty Rschja Temperature class = T3 (+5C-Ta-+40C) Also includes accompanying control panel. New battery.

Condition: like new (used), Year of construction: 2017, load capacity: 1,000 kg, lifting height: 850 mm, construction height: 1,380 mm, operating hours: 712 h, fuel type: electric, Manufacturer + model: JUNGHEINRICH ECE 310 * EX * Atex Jungheinrich - 3G / Zone 2 Mast: 1F850 ID: 22081.5936 Category: Demo Mast: 1F850 Fork length: 1150 mm Isdpfx Acszuty Djhoba Lowered height: 1380 mm Lifting height: 850 mm Capacity: 1000 kg Year: 2017 Hours: 712 hours Battery: Complete NEW * 24v / 465ah * Year: 2026 Options: * EX * ATEX - Jungheinrich !!!! System REF = E211104 / 2017 Gas: IIB Type: Cat 3G (For use in Zone 2) Temperature class: T3 (+5C-Ta-+40C) Also features side-mounted controls.

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   Ijdjwmm S Tepfx Achoba MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Iedonxi Uuspfx Acheba Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 5V0168, MACHINE SPECIFICATION Height of centres 280mm Swing over bed 554mm Swing over cross slide 370mm Swing in gap 830mm Width in front of faceplate 216mm Bed length between centres 2000mm Spindle speeds: number 3 Spindle speeds: ranges 18-200,55-605, 160-1800rpm Spindle nose mounting Camlock D1-11 Spindle bore 104mm Taper in nose bush No. 5MT Width over bedways 400mm Ibodpfx Ajzna Twschoa Travel of cross slide 300mm Travel of top slide 175mm Travel of tailstock barrel 178mm Tailstock in tailstock barrel No. 6MT Approx. Weight 3650Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chuck Quick change toolpost and 4-off toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Ibsdjnxi R Uspfx Achoa Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Iedpfx Acst Dmmvshoba Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Iodpfx Ajnq Dgujchoba Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Machine Dimensions Width 1550mm Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Ibjdpenzh Uijfx Achsa Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Standard Equipment Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   MACHINE EQUIPPED WITH:- Ibodpfx Aet Dmlfjchea Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding