Used Lichte Weite: 1.200 Mm for sale (71,286)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Lajdomhhf Sjpfx Am Noa - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard Laedpfxsmhhl He Am Noa

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Lsdpfxsmhh Dte Am Nsaa - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Technical data for the picking rack: Rack system: Dexion Type: HI280 Technical data for the installation: Number of rack rows: 01 pcs. Rack length: approx. 1,340 mm Number of bays per rack row: 01 pcs. at 1,290 mm Number of levels plus ground level: 06 pcs. Note: The advantage of a packing table or a picking rack is that all required tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x uprights, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. horizontal and diagonal braces Weight per piece: approx. 5.50 kg The uprights are pre-assembled Height: 1,200 mm Depth: 610 mm 06x shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x shelf beams, used Overall length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight per piece: approx. 0.84 kg Material finish: Sendzimir galvanized 48x storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight per piece: approx. 0.785 kg 01x load sign With information on bay and shelf loads, manufacturer and order number Lodpfon Smvhox Am Njaa Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damage, corrosion or similar may be present. General product information: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional charges, which can be quoted separately based on delivery location and scope.

Condition: new, 🧰 Product Features • Condition: New • Colour: grey • Material: Metal • External dimensions: 124 x 83.5 x 97 cm • Internal dimensions: 120 x 80 x 80 cm • Load capacity: 1500 kg • Stack load: 6000 kg • Weight: 78 kg • Front side: foldable • Base: sheet metal base with wooden insert 💰 Price €149 net excl. VAT from 50 pcs. €129 net excl. VAT • Quantity discount: on request • Shipping: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Over 5000 linear metres of pallet racks from various manufacturers always in stock Laodpfsdiyhxex Am Nja (Subject to change and errors in technical data, information and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: used, functionality: fully functional, total length: 1,200 mm, total width: 800 mm, total height: 1,900 mm, We are offering used mesh roll containers for sale. TECHNICAL DATA Height: 1,900 mm Width: 1,200 mm Depth: 800 mm 2 push handles 2 swivel castors and 2 fixed castors with parking brake with handle with drawbar equipped with side step assembled Condition: used PRICE €140.00 net per unit Laodsy Epu Sjpfx Am Nja €166.60 gross per unit incl. VAT Available quantity: 107 units Graduated prices per unit: 1 – 5 units: €140.00 net 6 – 10 units: €133.00 net 11 – 25 units: €126.70 net 26 – 50 units: €121.00 net from 51 units: €115.80 net YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged for an additional charge. The extra costs depend on the place of delivery and shipment volume and can be individually requested from us. PROJECT PLANNING Our sales team will be pleased to prepare a tailored, non-binding offer according to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The price is quoted per unit/net or as specified in the product description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as in machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Connect Four – The four building blocks for success by DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, For inquiries about the attachment, Mr. Herden is happy to assist you (on Tel. ...). DMS RL70120 Rotator Bucket / incl. Rotator / MS03 Mount / NEW item / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross Laodpeyxadasfx Am Noa - Weight: 217 kg - Cutting width: 1,200 mm - Volume: 220 l - Max. output speed: 9 – 10 rpm - Max. torque: 6,960 Nm - Recommended oil flow (rotation): 35 – 45 l/min - Max. operating pressure (rotation): 210 bar - Excavator class: 4 – 7 tons Optional: - MS03 Mount: €560.00 net - MS08 Mount: €890.00 net We have a very large selection of various DMS products in stock and immediately available! Mr. Herden (Tel. ...) is at your service. Upon request, we are happy to provide you with a financing offer. We are an official distributor and service partner for DMS. We are an official distributor and service partner for Westtech. We are an official distributor and service partner for Gierking GMT. We are an official distributor and service partner for OilQuick. We are an official distributor and service partner for Weber MT. We are an official distributor and service partner for Holp. We are an official distributor and service partner for Seppi M. We are an official distributor and service partner for Magni telehandlers. We are an official distributor and service partner for JCB construction machinery. We are an official distributor and service partner for Mercedes-Benz. We are an official distributor and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer you the complete DMS product range! Subject to errors and prior sale. = Further information = New: Yes Intended use: Construction Empty weight: 217 kg Contact Marius Herden for more information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Holp Verge Bucket / BL.100.120 / MS08 / 1,200 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €4,150.00 net / €4,938.50 gross - Suitable for excavators up to: 10 t - Approximate own weight: 240 kg - SAE capacity incl. cover: 245 liters - Cutting width: 1,200 mm - Total height / Verge height: 480 mm / 300 mm - The bucket is made entirely from HARDOX. Advantages of the Holp Verge Bucket: - The Verge Bucket reduces maintenance costs since it covers more meters in a shorter period. - As a specialist in well-maintained road edges, the Verge Bucket supports anyone who needs to maintain many meters of verges efficiently and economically. - The removable cover allows material to be cut not only in front of and behind guard rails but also directly underneath them, ensuring evenly maintained surfaces. - The Verge Bucket offers long service life thanks to the use of Hardox and its robust, single-sided open construction. We have many more Holp products available immediately in our warehouse! Please feel free to contact us. On request, we are happy to provide you with a financing proposal as well. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. Lsdjynfk Aepfx Am Nsaa We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Moreover, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! = Further Information = New: Yes Application: Construction Please contact Marius Herden for further information.

Year of construction: 2022, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (via phone ). Lehnhoff Grading Bucket / CP 10 45° / Variolock-VL80 / incl. MS08 Coupler / 1,200 mm cutting width / Year: 2022 / unused Price: €2,090.00 net / €2,487.10 gross - Excavator class: 8 - 10 t - Own weight approx.: 260 kg - SAE capacity: 290 litres - Cutting width: 1,200 mm Featuring a forward drawn blade, double-conical sidewalls, and optimized trapezoidal design, this Lehnhoff grading bucket is ideal for levelling and subgrade works. - Bevelled corners - Long, flat bottom and LH double-conical construction Laodpjyii Raofx Am Noa - Optimal penetration and fuel savings - Good emptying properties We have a very large selection of various buckets in stock and immediately available! Just contact us at / . We are happy to provide you with a financing offer upon request. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official OilQuick telehandler sales and service partner. We are an official Weber MT telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply you with the complete Holp range! Errors and prior sale reserved! Internal no.: 302439 = More information = New: Yes Application: Construction Empty weight: 260 kg Please contact Marius Herden for further information.

Condition: used, For inquiries about the attachment, Mr. Herden is available to assist you by phone. HS Schoch brush rake / root rake / MS01 / 1,200 mm / HARDOX / available immediately / NEW Price: €1,690.00 net / €2,011.10 gross - Working width (mm): 1,200 - Net weight (kg): 100 kg - Carrier vehicle operating weight (t): 1 - 3 MS01 coupler included. Lsdpfxeyhym Ae Am Nsaa The brush rake is manufactured entirely from HARDOX. We have a very large selection of various brush and root rakes in stock and available for immediate delivery! Mr. Herden (Tel.) will be happy to assist you. Upon request, we are pleased to offer you financing options. We are an official sales and service partner for Westtech. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of HS Schoch products! Errors and prior sale excepted. = Additional information = New: Yes Application: Construction Unladen weight: 100 kg Contact Marius Herden for more information.

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black Lajdohq Txhjpfx Am Noa 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 02x swivel castors, new 02x brake/steering rollers, new 01x angle set, new for mounting the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 04x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm Lajdjhq Twyspfx Am Nja clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 03x steel shelves, new dimension: 300 x 700 mm Type: H29/D 01x Angle set, new for fixing the worktop 08x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 723 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 02x swivel castors, new 02x brake / swivel castors, new 01x angle set, new Ljdpjhq Txwefx Am Njaa for mounting the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, We offer here for sale a new workbench from the manufacturer Metal Sistem. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1.200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in delivery: 02x workbench stand, new Laedpfx Aohq Tqdom Nsa Material color: compl. galvanized type of stand: TS4 incl. cross and diagonal braces, foot plates The stands are pre-assembled (bolted truss) 888 mm high 700 mm deep 02x workbench trusses, new Crosshead type: TS profile dim.: 70 x 42 x 3 mm clear width: 920 mm Material color: compl. galvanized 01x worktop, new Wood type: MDF thickness: 28 mm dimension: 900 x 1.200 mm Material color: black 01x angle set, new for fixing the worktop 04x safety hook, new Material color: compl. galvanized

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, lifting height: 4,350 mm, fuel type: electric, mast type: triplex, construction height: 1,995 mm, fork length: 1,200 mm, empty load weight: 2,000 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 and current safety standards — ensuring maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics — each vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany — with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personalized support — even after purchase Test on-site now and receive expert advice – we will find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Type: Counterbalance Forklift CPD12 Drive type: Electric Load capacity: 1,200 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,350 mm Mast type: Triplex Free lift: Yes Overall height: 1,995 mm Fork length: 1,200 mm Unladen weight: 2,000 kg Tyres: Solid rubber Model type: CPD12 Battery type: Lithium-ion Battery weight: 85 kg Charger: Integrated charger Lighting: 2x front work lights Lighting: 4x front work lights Lighting: 1x rear work light Lasdpfx Amexrgq Rj Noa Lighting: Rotating warning beacon Attachment: Sideshift

Condition: good (used), - 1pc. Jaw crusher Metso / Lokomo MK 120 . 1.200 x 900mm. Lsdjlf Iqcjpfx Am Nsaa With feed hopper . With motor . With spare parts : swing arm, flywheels, jaws, side wedges, bearings, springs etc. See PDF-file below for more detailed information.

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: cream white total width: approx. 2.200 mm total height: approx. 1.000 mm mesh size: approx. 60 x 50 mm Frame profile dim. (width): approx. 20 x 20 mm Frame profile dim. (height): approx. 15 x 15 mm wire thickness: approx. 3,00 mm weight/pc.: approx. 7,17 kg Internal designation: RW-3 Lajdpfem E I Nnjx Am Noa

Condition: good (used), The scope of delivery includes: 01x back wall grille, used Ljdem E I I Ujpfx Am Neaa material color: cream white total width: approx. 1.100 mm total height: approx. 1.000 mm mesh size: approx. 60 x 50 mm Frame profile dim. (width): approx. 20 x 20 mm Frame profile dim. (height): approx. 15 x 15 mm wire thickness: approx. 3,00 mm weight/pc.: approx. 3,90 kg Internal designation: RW-1

Condition: used, Vise jaw width 200 mm Jaw height 80 mm Lsdpfx Amedd Tpij Noaa Plate: Width below 250 mm Less than 500 mm length Opening width 250 mm Weight 72 kg

Condition: new, Technical data of the grating: Manufacturer: Gi-Ro Vreden Condition of the goods: new (unassembled) Reason for return: wrong order end customer The scope of delivery includes: 01x pressed grate, new (unassembled) Material color: hot-dip galvanized Total depth: 1,000 mm (bearing bar direction) Total width: 980 mm (cross bar direction) bearing bar dim.: 35/1,7 mm S355JR Ljdpfek Ebq Tsx Am Njaa TS anti-slip: no QS anti-slip: no edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9,35 kg | pcs. Internal designation: R

Condition: good (used), The scope of delivery includes: 106x wire gratings, new Material color: sendzimir galvanized load: 500 kg; with evenly distributed load Lodsi Hkpdjpfx Am Noaa execution: laid on Depth: approx. 1.100 mm ( bearing bar direction ) width: approx. 1.150 mm Mesh size: approx. 100 x 60 mm number of bars: 3 pcs. Weight: 5,00 kg | pcs.

Condition: as good as new (ex-display), Remark: Ljdjn Tprnjpfx Am Noaa This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Application: suitable for laid gratings for mesh size approx. 33 x 33 mm Included in delivery: 01x clamp fastening, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 100 x 32 x 15 mm (LxHxW) 01x bracket, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 50 x 25 mm 01x threaded rod M8, II. choice (virgin material) total length: approx. 100 mm 01x square nut M8, II. choice (new goods) Material color: hot-dip galvanized Total weight: 0,120 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x back wall grille, used material color: similar beige total width: approx. 1.200 mm total height: approx. 1.100 mm Ledpolucaqefx Am Njaa Mesh size (outside): approx. 93 x 53 mm Mesh width (inside): approx. 88 x 48 mm Frame profile dim.: L-profile 30 x 30 mm The back wall grids are rusty, partly the frame profile is damaged, see pictures.

Condition: good (used), blacksmith's vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise -Jaw width: 135 mm Laodpfx Ajdl E Irem Nea -Wingspan: 150 mm -Number: 9 vises available Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: good (used), bench vise, locksmith's vise, parallel vise -Jaw width: 150 mm Wingspan: 315 mm Ljdpfjyq Hkpex Am Noaa -Number: 1x vises available Price: per piece -Dimensions: 570/220/H400 mm -Weight: 52.7 kg