Used Pye-63S for sale (1,401)

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Flow rate accuracy: < 0.1% Laodszdtlfepfx Ammoc Flow rate precision: < 0.1% Gradient dosing accuracy and precision: ± 0.5% at 2 ml/min (analytical only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus dual pump 6-port valve MXP9900-000 AFC-3000 automated fraction collector RFC-10 regulator Condition: used Scope of supply: (See pictures as shown) (Subject to change and errors in technical data and specifications!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Environment: 15°C - 40°C Type: LPC03 Condition: used Lodpfxezdqkre Ammjac Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100597, pressing force: 1,000 t, overall weight: 33,000 kg, TECHNICAL DETAILS Punching force: 10,000 kN Table area (W x D): 1,100 x 800 mm Stroke: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Die thickness: up to 3 mm Sheet size (width): max. 1,100 mm Punching speeds Upward: 47.8 mm/s Downward: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil: approx. 1,550 kg Automatic punching table Type: 355 Table plate size (W x D x H): 1,000 x 700 x 10 mm Hardness: 62 HRC Grinding pattern: 7 MACHINE DETAILS Electrical system Operating voltage: 400 V Ljdpfezfy Amex Ammjac Frequency: 50 Hz Rated machine current: 50 A Supply line fuse: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power consumption: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Dimensions of the puzzle separator (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of the puzzle separator: approx. 1.8 t Noise level: < 70 dB(A)

Condition: good (used), Year of construction: 2012, 5-Axis CNC Machining Center Manufacturer: AXA Machine Model: VPC-2800U Control System: Siemens Year of Manufacture: 2012 Technical Specifications Working Area - X travel vertical (mm): 3,900 - Y travel (mm): 2,940 - Z travel (mm): 1,100 CNC Rotary Table - Clamping area (mm): ø 2,800 Feed Drive - Max. rapid traverse speed in X/Y/Z (m/min): 30/30/25 Working Spindle - Standard drive No.: 140 Spindle speed range (rpm): 30-7,500 Spindle power max. duty cycle 100% (kW): 63 Lsdpfx Aezfhdxemmsac Spindle torque max. duty cycle 100% (Nm): 191 Tool holder: SK50 Swivel Head - Swivel range B-axis (degrees): 90 - Indexing: freely interpolating Tool Changer - Tool stations: 60 Please note: The machine is NOT equipped with a turning function. Changes and errors in the technical data and information excepted.

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Lsdpfxjzfau Ao Ammsac Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,963 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D sl Operate, overall weight: 11,800 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 5, This 5-axis DMG MORI DMU 65 monoBLOCK was manufactured in 2016. It features an impressive X-axis travel of 735 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful spindle speed of 15,000 rpm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Spindle: power 21 kW (40% ED) / 16 kW (100% ED); torque 111 Nm (40% ED); pull stud DIN 69872 • Table: Rotary table (C-axis) Ø650 mm integrated in rigid table 800 x 650 mm • Swivel/rotary axes: A-axis +120° / -120° from 0°; C-axis 360°; A-axis torque/holding 3,400 Nm (100% ED); A-axis hydraulic clamping holding torque 6,200 Nm; C-axis torque/holding 2,000 Nm (100% ED) • Feed/rapid: Rapid traverse X/Y/Z 40 m/min; max feed X/Y/Z 40,000 mm/min; max feed force X 7 kN, Y 13 kN, Z 10 kN (all 100% ED) • Guideways: Roller linear guides on all linear axes • Measuring system: Direct, absolute, 0.001 mm resolution, magnetic (for Siemens) • Control: CELOS with Siemens 840D sl Operate, 21.5" ERGOline multi-touch • Tool changer/magazine: Automatic with double gripper (vertical); 30-position HSK-A 63 chain magazine • Coolant/swarf standard: Chip tray with integrated 500 L tank; standard swarf management via chip tray • Condition: Excellent; only 1,963 spindle hours (machine was used only for making of prototypes) Additional equipment Lasdpfxszd T Sfj Ammjc • Production package (P-K0398): Chip conveyor with coolant tank, paper band filter, internal coolant through spindle (IKZ) 40 bar / 23 l/min, external coolant 4 bar / 40 l/min, door flushing • Tool interface (P-M0039): Tool taper adaptation for HSK-A63 (DIN 69893) • Swarf wash pistol (P-G0004): 2 bar / 40 l/min • Measuring probe (P-K0263): Heidenhain TS 649 infrared touch probe • Tool measuring system (P-K0405): Blum laser for vertical tool length and diameter measurement • Kinematics option (P-K0224): 3D quickSET toolkit for checking/correcting 4/5-axis configuration • Operation Mode 4 (P-H0038): Manual intervention in work area with open doors under controlled process • Electronic handwheel (P-H0109): Siemens 840D Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes

Condition: used, mileage: 148,685 km, power: 55 kW (74.78 HP), first registration: 11/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,660 mm, fuel: diesel, CO₂ emissions: 142 g/km, fuel tank capacity: 60 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,540 mm, total width: 1,840 mm, total height: 1,860 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, power mirror, sliding door, start-stop system, trailer coupling, General information Number of doors: 5 Model range: May 2018 - Nov 2021 Cab: single Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Measures length/height: L1H1 Weights Empty weight: 1.467 kg Carrying capacity: 708 kg GVW: 2.175 kg Interior Interior: black Consumption Average fuel consumption: 4,5 l/100km (63 MPG) Urban fuel consumption: 4,9 l/100km (58 MPG) Extra urban fuel consumption: 4,2 l/100km (67 MPG) Maintenance, history and condition Number of owners: 2 Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Bluetooth car kit Ledsxxmdwspfx Ammsac - Driver's airbag - Electrically operated front windows - Front fog lights - Heated door mirrors - Heated windscreen - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Radio - Radio with DAB+ - Rear doors - Rear parking sensor - Remote central locking - Reversing camera - Sliding side door right - Telephone enabled with Bluetooth - Third brake light

Year of construction: 2008, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Full enclosure Measuring probe for complete measurement of the tools Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A Loader for up to 6 eroding disk sets (tool changer) Alphanumeric keyboard Standard programs for measuring, eroding Cooling and cleaning device for dielectric Automatic fire extinguishing device Extraction N183 1 exchange element 1 flushing set 1 measuring mandrel 1 mounting flange for rotating electrodes X axis travel: 440 mm B-axis: +/- 15° Lodpfx Amjzdinkemoac Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Lasdpfx Amey Tpz Remsc Location: Supplier.

Condition: used, Technical details: bore capacity in steel (diameter): 25 mm throat: 310 - 315 mm bore stroke: 200 mm spindle taper MT: MK4 spindle speed:: 63 - 1000 U/min Distance spindle/table max.: 670 mm table clamping surface:: 640 x 540 mm table rotating: 360 ° Lajdszfiy Ujpfx Ammec current- max.: 7 A total power requirement: 3 kW weight of the machine ca.: 700 kg dimension machine xH: 0,9 × 0,6 × 2,46 m

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: HERMLE Model: C 800 V Machine Type: CNC Vertical Machining Center Year of Manufacture: 2002 Control System: Siemens SINUMERIK Configuration: 3-Axis Machining Center Location: France Condition: excellent, can be demonstrated while powered on Origin: technical university / training and research environment Technical Data: Travel Ranges: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle: Tool Interface: HSK-A 63 Max. Spindle Speed: 16,000 rpm Max. Spindle Power: 15 kW Max. Torque: 130 Nm Internal Cooling / Coolant Through Spindle: 40 bar Axes / Feed Rates: Max. Axis Speed: 35 m/min Acceleration: 5 m/s² Tool Changer: Tool Magazine: 30 positions Tool System: HSK-A 63 Equipment: Siemens SINUMERIK CNC control system Laedpfx Aszd Sr Rjmmoc HERMLE control panel 3-axis configuration Vertical milling spindle HSK-A63 spindle 16,000 rpm spindle speed Internal cooling / High-pressure cooling through the spindle, 40 bar 30-position tool magazine Enclosed work area Fixed machine table with T-slots Machine light Coolant system / Pump unit available External high-pressure pump visible Renishaw system / Measuring probe system visible Electronic hand-held device / Handwheel Control cabinet integrated Extraction / Exhaust connection visible Machine vise visible in photos, scope of delivery to be agreed Manuals / technical documentation available Description: For sale is a HERMLE C 800 V CNC vertical machining center, manufactured in 2002, with a Siemens SINUMERIK control system. The machine comes from a technical university or training and research environment in France. It is therefore not a conventional production machine from heavy series production, but a machine from a technically well-maintained environment. The HERMLE C 800 V is a very stable and high-quality 3-axis milling machine with a large working area, HSK-A63 spindle, 16,000 rpm, 30-position tool magazine, and internal cooling / high-pressure cooling through the spindle at 40 bar. The following combination is particularly noteworthy: * HERMLE machine construction quality * Siemens SINUMERIK control system * HSK-A63 tool interface * 16,000 rpm spindle * Internal cooling / High-pressure cooling 40 bar * 30-position tool magazine * Renishaw measuring system visible * Origin from a technical university environment The machine is very well suited for toolmaking, mold making, prototype construction, training, research, single-part production, and precise general CNC milling operations. The machine is currently set up and can be inspected or demonstrated while powered on, by arrangement. Note on peripherals: According to the current photographic documentation, a coolant / pump unit and an external high-pressure pump are available. A large separate KNOLL chip conveyor, KNOLL paper band filter, or a large central KSS filter system is not available. The exact scope of delivery of peripherals, accessories, clamping devices, tool holders, measuring probes, and documentation will be finalized before the sale. Sold as a used machine, as is, without warranty. Technical specifications are subject to change without notice. Subject to prior sale.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, X/Y/Z 2000/600/800 Control system: Sinumerik 840D Handwheel Laedszf Ahfspfx Ammoc Tool magazine: 36 positions Coolant pressure: 20 bar Paper filter system: 450 liters Spindle speed: 12,000 rpm Tool holder: HSK 63 Drive power: 30 kW NC rotary table RW/NC 220/320 Measuring probe

Condition: repair required (used), Year of construction: 2005, operating hours: 20,000 h, functionality: not functional, Machine Type: CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type: GMX 200 linear Year of Manufacture: 2005 Control System: Siemens 840 D powerline Location: Ober Ramstadt Technical Details Turning Diameter: max. 560 mm Turning Length: 1,070 mm Control System: Siemens 840 D powerline Distance between Spindles: 1,000 mm Main Spindle: Max. Speed: 5,000 min/-1 Drive Power - Main Spindle: 25 / 37 kW Max. Torque: 390 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Chuck Diameter: 200 - 315 mm Milling Spindle: Speed: max. 12,000 min/-1 Drive Power - Milling Spindle: 13.2 / 22 kW Max. Torque: 100 Nm Tool Interface: capto Holding Torque: Y-Axis: +/- 80 mm B-Axis: +/- 120 ° C-Axis: 1 ° X-Axis Travel: 485 mm Bearing Diameter: 80 / 55 mm Counter Spindle: Max. Speed: 5,000 min/-1 Drive Power - Counter Spindle: 25 / 37 kW Max. Torque: 320 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm Laedpfxszd Dw Ej Ammec C-Axis: 0.001 ° Max. Chuck Diameter: 315 mm Tool Magazine: Number of Tool Positions: 46 pos.HSK 63 A Tool Interface: Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Neighbor Position: 150 mm Max. Tool Length: 300 mm Total Power Requirement: 75 kVA Machine Weight Approx.: 14.0 t Space Requirement Approx.: 8.0 x 4.5 x 3.1 m Accessories Documentation: Chip Conveyor: Coolant System: 8 / 20 bar C-Axis: B-Axis: Y-Axis: Tool Magazine: Counter Spindle: Milling Spindle:

Condition: like new (used), Like-new industrial label printer for print-and-apply applications in logistics, shipping, packaging, and production labeling. Manufacturer: Zebra Technologies Type: Industrial label printer Series: ZE500 Ljdpfszdux Hjx Ammjac Model: ZE500-4 Version: Legi-Air 4050 LH Condition: like new Quantity: 1 Serial number: 67J193100183 Printing process: Thermal direct and thermal transfer Print width: up to 104 mm Resolution: 300 dpi Media width: up to 114 mm Mains voltage: 100–240 V AC Frequency: 47–63 Hz Rated current: 4 A Operation: Front display with keypad Design: OEM print module for print-and-apply systems Ribbon operation: Yes Application area: Shipping labels, pallet labels, product labeling, logistics labeling Manufacturer designation, print module: ZE500-4 Legi-Air system: 4050 LH

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, year of manufacture 2010, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-position tool magazine, full enclosure of work area, direct measuring systems, chip conveyor, bellows with steel lamellae, 3D measuring probe, laser measuring device. Lodpfjzdqk Eex Ammsac

Condition: new, Year of construction: 2025, Machine Specification: Travel distances: - X axis travel: 850 mm - Y axis travel: 500 mm - Z axis travel: 500 mm - Spindle nose to table: 150–650 mm Table: - Table size: 1000 x 500 mm - Max. load: 600 kg - T-slots on table: 3 x 18 x 125 mm Spindle: - Drive type: Built-in - Max. speed: 15,000 rpm - Power: 11/18.5 kW - Torque: 45/60 Nm - Tool holder: BBT 40 - Pull stud: MAS403-P-40T-I (45°) Feed rates: - Rapid traverse (X/Y/Z): 30/30/30 m/min - Cutting feed (X/Y/Z): 10/10/10 m/min - Ball screw diameter (X/Y/Z): 40 mm Tool magazine: - Capacity: 24 tool positions - Type: BBT 40 - Max. tool diameter (with adjacent pockets full/empty): Ø80/Ø150 mm - Max. tool length: 300 mm - Max. tool weight: 8 kg - Tool-to-tool indexing: 2.5 sec Precision: - Positioning accuracy (X/Y/Z): 0.006/0.005/0.005 mm - Repeatability (X/Y/Z): 0.004/0.003/0.003 mm Other features: - Machine weight: 6 t - Dimensions (LxWxH): 2640 x 2870 x 2760 mm Standard configuration: - Mitsubishi M80VB CNC - 15,000 rpm built-in spindle - Spindle cooling - Workpiece air cooling - Machine bed flushing Lsdpew Rcxvsfx Ammoac - External coolant tank - Full enclosure - Air gun - 3-color signal lamp - Standard accessories - Documentation - CE Options: - FANUC PLUS 3A - Mechanical spindle 12,000 rpm (BBT40) - Kessler spindle 20,000 rpm (HSK-63) - Control panel air conditioning - Spindle ring cooling - Through-spindle coolant 20 bar - Oil separator - CNC 4th axis - Oil mist separator - Glass scales - Automatic door - 24/30-tool magazine Machine is equipped with: - Spindle ring spray cooling - Heidenhain linear scales on three axes - Through-spindle coolant 20 bar - Chain-type chip conveyor with chip cart - Workpiece rinse water gun (automatic switching) - FANUC PLUS 3A+ 15-inch monitor (CE configuration) - 30-tool servo magazine - Oil-water separation device - HSK-A63 interface for electric spindle tool holder - ROTOCLEAR - HPC500II lifting tool - Software interfaces for BLUM tool measurement and workpiece probing system (TC60) - MOV850 lifting tool - 2-year full machine warranty - Pre-rinse water system inside the machine - Control cabinet air conditioning

Condition: good (used), functionality: fully functional, fuel type: gasoline, color: original, Used Wacker rammer BS60Y with original Wacker WM 80 AT engine and an additional, almost unused tamper shoe extension. The rammer is fully functional and ready for immediate use. Weight: approx. 63 kg Engine: Wacker 2-stroke Please do not send email inquiries! For questions, we are happy to assist you by phone. Inspection and collection only by prior telephone arrangement! Lasdozdn Emjpfx Ammsc Subject to change, prior sale, and errors.

Condition: excellent (used), x-travel 600 mm y-travel 400 mm z-travel 400 mm Control HEIDENHAIN spindle turning speed - stepless 63 - 3150 U/min Lsdpfozd Hg Aox Ammsac quill stroke 100 mm tool taper SK 40 table surface area 630 x 400 mm total power requirement 8,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel

Condition: excellent (used), Advantages of the GF4: - Larger working range - Clamping jaws made of aluminum - Motor enables cutting of pipes made from very hard materials Ljdpeym Unzefx Ammoac - 30% weight reduction due to new body design - Laser cutting position indicator - New ergonomic handle - Power cable with swivel and quick connector The GF4 machine can be operated with the AVM automatic rotation module. Technical specifications: - Pipe outer diameter [mm]: 12 - 120 - Pipe wall thickness [mm]: 1 - 9 - Minimum pipe inner diameter (63 mm blade) [mm]: 21 - Minimum pipe inner diameter (68 mm blade) [mm]: 16 - Minimum pipe inner diameter (80 mm blade) [mm]: 4 - Built-in electronic speed controller: 65 - 215 rpm - Power: 1.8 kW without AVM / 1.9 kW with AVM, 200-240 V, 50/60 Hz - Protection class: II - Vibration level (EN 2662, part 1): 2.5 m/s² - Noise level: 79 dB (A) The GF series machines are orbital pipe and elbow cutting machines. The pipes to be cut are clamped in a self-centering, prismatic vice, which prevents deformation. Pipe diameter and tool speed can be easily set via intuitive controls, depending on the material type. The cutting device is guided manually around the pipe, while the electrically driven blade cuts or bevels the pipe edge. This is a planetary cutting method introduced by Georg Fischer. Orbital cutting is a time- and cost-saving process: - Perpendicular, flat, and burr-free cuts - Pipe ends prepared for various joining techniques without additional processing - Cold cutting - No overheating, preventing intergranular corrosion that could cause material cracking - Fast cutting - Saves time and money - Pipe edge beveling - Pipe ends can be beveled simultaneously during the cutting process or separately Optional parts: GF and RA machines can be supplied with either an automatic rotation module (AVM) or manual module (MVM). The AVM module continuously monitors cutting speed according to torque and set parameters. The MVM module, utilizing a gear and handle, enables effortless rotation of the machine head at a constant speed.

Condition: used, Line filter for Siemens SINAMICS drive systems. Designed for use with Smart Line modules to reduce grid feedback and electromagnetic interference. Manufacturer: Siemens Type: Line filter Model: 6SL3000-0HE15-0AA0 Series: SINAMICS Ljdjzdnkcopfx Ammjac Design: Line filter for 5 kW Smart Line module Rated voltage: 3 AC 380–480 V Frequency: 47–63 Hz Rated current: 12 A Connection phases: L1, L2, L3 Connection side: LINE / LOAD Mounting type: Control cabinet mounting Housing: Metal housing Condition: used Location: Kusel Quantity: 2 units available

Condition: used, Year of construction: 2011, controller manufacturer: Fanuc, controller model: 30i, _____ Description: Year of manuf. : 2011 Control : Fanuc 30i In General: Laodpfozfu Rfox Ammjc Year of manufacture:2011 Control system:Fanuc 30i Maximum table load:100 kg Travel range X/Y/Z:300/300/370 mm Installation weight:approx. 33,000 kg Machining station I (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station II (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station III (X/Y/Z/B): Technology:1 x vertical spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Machining station IV (X/Y/Z/B): Technology:1 x vertical spindle + 1 x horizontal spindle Speed:8,000 rpm Tool holder:HSK-A 63 Power:31 kW Torque:197 Nm Tool changer:12 stations B-axis:0.001°, pneumatic indexing, clamping force Tool diameter/length:125/250 mm Loading station: Numbers:2 pieces (front and rear) Equipment: Position measurement systems:Direct on all axes Chip removal:Chip conveyor Coolant supply:IKZ system, 30 bar Tool breakage monitoring:Artis, type CTM V5 Zero-point clamping system:Erowa Emulsion mist separator:Reven

Condition: good (used), mileage: 152,578 km, power: 105 kW (142.76 HP), first registration: 10/2020, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 6,050 mm, total width: 2,020 mm, total height: 2,700 mm, loading space length: 3,190 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2020, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - None - LED lamp - Manual - Radio/cassette - Rearview camera - Fabric - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 1201 kg, Tare weight: 2299 kg, Gross vehicle weight: 3500 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Auxiliary heater, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Heated mirrors, Rearview camera, Lighting type: LED lamp, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Engine power: 105 kW (141 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 2, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, L2H2 LED RWD Automatic Mbux Camera Cruise Control Auxiliary Heater Air Conditioning Euro6 143 hp!, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: V-63-PGL Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Ljdpfxoymwmto Ammeac Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 4 mm Weights Unladen weight: 2,299 kg Payload: 1,201 kg GVWR: 3,500 kg Functional Loading area height: 65 cm Maintenance APK (Technical Inspection): valid until 11/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €368 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: new, - NEW - General features and technical data: Lasdpozd Hckofx Ammjc - 4-knife helical cutterhead, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal screws - Chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Dust extraction port 150 mm - Electrical components and safety devices in accordance with CE standards Features and technical data SP 63 A: - Planing width: 630 mm - Motor: 50 Hz, 5.5 kW / 7.5 HP - Infinitely adjustable feed rate from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (input of the planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Includes: - Motor with 7.5 kW / 10 HP, incl. automatic star-delta starter Order No.: 04/03 & 61/10 - Extension for thickness table, 600 mm Order No.: 70/03 - Cutterhead system TERSA, incl. reversible knives Order No.: 28/03 - 1 rubber infeed roller & 2 rubber outfeed rollers 630mm

Condition: like new (used), Year of construction: 2024, operating hours: 7,556 h, functionality: fully functional, 4 x LIEBHERR LC 280 DC Gear Hobbing Machines For sale are 4 identical LIEBHERR LC 280 DC gear hobbing machines, all manufactured in 2024. Manufacturer: Liebherr Verzahntechnik GmbH Model: LC 280 DC Machine Type: CNC gear hobbing machine with integrated ChamferCut unit Quantity Available: 4 units Year of Manufacture: 2024 Example Machine No.: XXX Control: Siemens CNC / HMI user interface Technical Data: Max. Workpiece Diameter: 280 mm Max. Module: 6 mm / 4 mm depending on the version Axial Travel: 400 mm Shift Travel: 200 mm Max. Hob Diameter: 150 mm Hob Speed: 2,250 / 6,000 rpm Table Speed: 250 / 800 rpm Max. Module ChamferCut: 5 mm Max. Tool Speed ChamferCut: 2,000 rpm Max. Tool Diameter ChamferCut: 130 mm Max. Tool Clamping Length Drilling Tool: 236 mm Max. Tool Clamping Length Shank Tool: 360 mm The LC 280 DC is a compact gear hobbing machine for workpieces up to 280 mm in diameter and integrated ChamferCut machining; according to Liebherr, it is designed for gear hobbing and parallel, defined deburring/chamfering. ([Liebherr][1]) Equipment: Integrated ChamferCut unit Automatic workpiece handling / round magazine Siemens CNC control Liebherr HMI / production interface Workpiece spindle Hobbing head Deburring/chamfering unit Full protection cabin Work area lighting Automation interface CE marking Machine suitable for dry and wet machining, depending on equipment and process Electrical data per machine according to the nameplate: 400 V AC 50 Hz Control voltage: 24 V AC Ljdozdv Upspfx Ammoac Installed power: 29 kVA Rated current: 42 A cos φ: 0.81 Fuse: 63 A gL Control cabinet weight: 900 kg All 4 machines are identical, manufactured in 2024, and come from modern industrial series production. Technical data according to nameplate, manufacturer's specifications, and photo documentation. Subject to errors and prior sale.

Condition: used, Diameter 48 mm Bilz threaded adapter Diameter 63 mm Variolock connection Lsdpfjb Tyqpjx Ammeac Length 160 mm Overall length 180 mm 2 pieces available