Used 32 Channel Pressure Scanner 2.5 Psi for sale (22,700)

Condition: new, Year of construction: 2026, 560 mm Podpfx Afjy H N Siegept 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min SK 40

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min Podpfx Aoyrtyasfgjpt SK 40

Condition: new, Phytron ZMX + 32 V2 . 10011572 stepper motor driver SN 00271716, unused, 100% functional, scope of delivery as shown in the photos. Pjdpsy R Iwfsfx Afgjpt

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, pressure: 1 bar, 1 used low-pressure steam boiler ----- Manufacturer: VIESSMANN Model: Vitoplex 100-LS Output: 580 kW Steam output approx.: 800 kg/h Water content approx.: 1,316 l Permissible operating overpressure: 1 bar Year of manufacture: 2001 Pedpfxow I T E Ie Afgjpt CE marking: 0035 Equipped with Weishaupt gas burner, separate control cabinet, feed water pump, and the existing coarse and fine fittings.

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle pitch circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross-slide travel (total / working): Upper: 50 / 33 mm Center: 50 / 30 mm Lower: 60 / 37.5 mm Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Workpiece speeds per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Podpfsyxcr Hox Afgspt Short: 0.63 – 71 seconds Long: 1.8 – 200 seconds Secondary times: 0.7 – 1.25 seconds Main drive: 18.5 kW Dimensions (incl. bar feeder): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz Scope of supply: SCHÜTTE SF 32 machine Bar loader

Condition: used, Year of construction: 1988, SCHÜTTE SF 32 Maximum bar diameter round / square: 32 / 22 mm Spindle circle diameter: 300 mm Bar feed: 125 mm Longitudinal travel (total / working): 100 / 80 mm Cross slide travel (total / working): Top: 50 / 33 mm Middle: 50 / 30 mm Bottom: 60 / 37.5 mm Podpfx Afjyxcuusgept Spindle speeds (49 steps): Range I: 450 – 3,150 rpm Range II: 200 – 1,400 rpm Workpiece feed per cycle: Normal: 60 – 425 Short: 33.5 – 236 Long: 95 – 670 Main times (35) per spindle revolution: Min. / Max.: 0.63 – 200 s Normal: 1.12 – 125 s Short: 0.63 – 71 s Long: 1.8 – 200 s Secondary times: 0.7 – 1.25 s Main drive: 18.5 kW Dimensions (incl. bar guide): approx. L x W 6.5 x 1.5 m Weight: approx. 8.3 t Voltage: 400 V / 50 Hz

Condition: used, This listing is for 1 of 6 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. Pedpjxxx Tqsfx Afgopt The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations

Condition: excellent (used), 1 used, very well-preserved universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal coolant supply through the spindle, and hydraulic tool clamping Manufacturer: CME, Origin Spain Model: FS Pjdpfsyf Uqtjx Afgept Spindle mounting: DIN 69871 AD, ISO 50 Maximum speed range: up to 4,000 rpm Maximum drive power: 22/30 kW Weight: approx. 300 kg This high-quality milling head was used as a loaner milling head and was only put into operation for repair purposes while the other milling head was being repaired and overhauled. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 159 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 8/18-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 8/18-4M Ppsdpfxoy Tw Hbe Afgjt Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 400 - 800 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 5.5 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 159 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 24,400 l, total height: 5,115 mm, inner diameter: 2,900 mm, outer diameter: 3,100 mm, overall weight: 4,500 kg, wall material: stainless steel, wall thickness: 4 mm, wall structure: double-walled, number of chambers: 1, operating temperature: 40 °C, operating pressure: 3 bar, Equipment: CE marking, Stainless Steel Pressure Vessel (Beer Tank), Insulated, Temperature-Controlled Technical Data / Dimensions Available units: 1 Volume: approx. 24,400 liters Type of vessel: Pressure vessel Condition: factory new Food-grade: yes Construction: vertical, standing Notes: Beer tank / Beer pressure tank Internal diameter: approx. 2,900 mm External diameter: approx. 3,100 mm Cylindrical height: approx. 2,900 mm Total height: approx. 5,115 mm Shell thickness: approx. 4 mm Weight: approx. 4,500 kg Specific gravity of medium: 1 t/m³ Operating pressure: overpressure Maximum operating overpressure: 3.00 bar Test pressure: 4.30 bar Bottom wall thickness: approx. 8.0 mm Top wall thickness: approx. 8.0 mm Shell/cylinder wall thickness: approx. 4 mm Floor clearance: approx. 430 mm Material / Properties Inner shell material: stainless steel Material grade: V2A-1.4301 (AISI 304) Double jacket material: stainless steel Legs material: stainless steel Outer surface: mill finish, IIB Inner surface: 2B mill finish Pedpfey Sb Hvox Afgopt Internal weld seams ground Notes: Tank ends (heads) internally ground, Ra < 0.8 µm Heating / Cooling System Heating / cooling system included Number of cooling zones: 4 Cylinder: Pillow Plates / Thermoplate (outside) Bottom head: Pillow Plates / Thermoplate (outside) Cooling medium: glycol Operating pressure: 4 bar Operating temperature: -10 / +40°C Double jacket volume: approx. 61 liters Heat / cooling surface area: Bottom head: approx. 3 m², Cylinder: 3.2 + 12.1 + 5.6 m² Heating / cooling system material: V2A-1.4301 (AISI 304) Insulation Insulation included Insulation thickness: approx. 100 mm Insulation material: perlite Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Equipment Supporting form: legs Number: 4 Fixing: fixed Height-adjustable legs Top end: torispherical (Klöpper) head Bottom end: torispherical (Klöpper) head Top head: 2 x crane lugs 1 x threaded nozzle DN 100 (for vacuum valve) 1 x threaded nozzle DN 80 (for cleaning, venting, and valve combination (RLV)) 1 x welded socket DN 65 (pressure measurement) 1 x thermowell TM251 (temperature measurement) 1 x ladder bracket Shell: 1 x sanitary manway (350 x 450 mm) with swing arm 1 x cable conduit DN 10 to manway 1 x CIP line DN 50 1 x threaded nozzle DN 10 (sampling) Bottom head: 1 x outlet DN 50, extended to the front in threaded nozzle DN 50, terminating 1 x welded socket DN 65 (pressure measurement) Notes: Tank is unused and in original packaging. Documentation Drawing Test certificate CE declaration of conformity Parts list Material certificates

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, The device is complete and operational – it was previously used in conjunction with a Pitney Bowes XPV inserter. The issue that needs repair concerns only the reading function. Ppjdpfjyq Rm Usx Afget

Condition: excellent (used), Year of construction: 1991, Universal CNC milling machine Specifications: CNC: HEIDENHAIN TNC415 Table longitudinal travel X-axis: 3,200 mm Transversal travel Y-axis: 1,200 mm Vertical travel Z-axis: 1,250 mm Ppodpfx Ajwvhk Nefgot Table dimensions: 5,000 x 1,000 mm Table load capacity: 15,000 kg Rapid traverse X/Y/Z: 12,000 mm/min Spindle taper: ISO 50 Spindle power: 22 kW Spindle speed: 2 to 2,000 rpm Total connected load: 46 kVA Machine weight: 25T Machine dimensions: 7,600 x 3,900 x 3,200 mm Equipped with: Manual universal head

Condition: used, Faro Focus 3D 120 Laser Scanner, In Flight Case with 3 x Batteries and Charger, SD Card and USB Stick, Safety Glasses, Power Leads, 2 x Flight Cases with 10 Reference, Spheres and 8 Mounted Base Plates, Quick Start Guide Manual. S/No. LLS061101008 Psdpey Idlgofx Afgept Please Note: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, warranty duration: 1 months, type of input current: AC, input voltage: 230 V, price is EX VAT, EXW terms. Official shining 3d Reseller in norway selling their Demo unit Trak pro 2 is a high speed Blue laser 3D scanning system with a tracker to remove the need for market placement on parts. Its very fast and very precise. 0,023mm precision ISO sertified Shining 3D FreeScan Trak Pro 2 3D Scanning System, independently developed by SHINING 3D, uses special technology to obtain complete and accurate 3D data for medium and large objects by capturing the spatial position of the scanner head in real time with an optical tracker. It is suitable for various static and dynamic applications, including large-scale 3D inspection in aerospace, automotive, shipping and energy industries, etc. Ppsdpfx Ajyrxxhsfgot

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Podpfxsfz Dvcs Afgspt • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Ppedpof Aaalefx Afgjt Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: good (used), Year of construction: 1989, sheet width 2520 mm plate thickness 2.5 mm bending angle max. 135 ° stroke of upper beam 250 mm adjustment UW 80.0 mm Pedjy Raiyjpfx Afgspt back stop - adjustable ca. 925 mm work height max. ca. 935 mm total power requirement 6.0 kW weight of the machine ca. 2500 kg. dimensions of the machine ca. 3600 x 1650 x 1425 mm good condition (!!) with 1x split set of goat foot tools Equipment: - dynamic, powerful motorized folding machine - SCHRÃ?DER NC control unit "POS 800" with LCD display * Fast programming of individual parts - Control panel, front right - NC electro-motorized back gauge * with rear sheet support surface - Manual lower beam adjustment - 1x free-moving double foot switch - 1x extra bending machine .. B = 10.0 mm * built-in bending rail with .. B = 25.0 mm - 1x split set of goat foot tools ... H = 130 mm * a pointed rail is installed - Operating instructions

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² Ppjdjvwku Uopfx Afgot 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Belt length ± 425 m Pjdpfxey Nkdfj Afgept Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: used, mileage: 210,654 km, power: 120 kW (163.15 HP), first registration: 06/2011, fuel type: diesel, number of seats: 20, gearing type: mechanical, next inspection (TÜV): 05/2027, emission class: euro4, color: green, Year of construction: 2011, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * €20,900 net * Volkswagen Crafter 50 2.5 TDI 120 kW Maxi Coach, Double Roof Air Conditioning, 20 seats, Euro 4 * 1+19 seats * 6-speed gearbox * Armrest * Radio CD * Driver airbag * Tinted windows * Cruise control * Dual-zone automatic climate control * Roof-mounted air conditioning * Electric windows * Electric mirrors * Central locking * ABS * ESP * Roof hatch/Emergency exit * Fog lights * Reversing camera * Wheelbase: 433 cm * Unladen weight: 3,175 kg * Payload: 1,825 kg * Gross vehicle weight: 5,000 kg * Bus registration Pedjy N Ixmopfx Afgjpt * Vehicle No. 35 OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment only...) CONTACT DETAILS Phone: WhatsApp: Email: Export and transit license plates (export number) available from us. Subject to errors and prior sale. Technical data and equipment details are to be checked separately. The contractual condition is only that which is inspected and confirmed in writing at the time of purchase on site. Please arrange an appointment...

Condition: ready for operation (used), SM 32/200 sliding module, 200 mm stroke, pneumatic linear actuator, used, minor signs of wear, 100% functional, delivery as per photos. Pedpfx Afoy Rcmhsgopt

Condition: reconditioned (used), functionality: fully functional, operating pressure: 200 bar, empty load weight: 48 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HD 9/20-4MX PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and a 25° power nozzle. A built-in hose reel makes it easy to roll up and store the hose. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. Ppedpfey S U H Asx Afgot A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 200 bar and 900 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Flow rate (l/h): 900 Working pressure (bar): 200 Maximum pressure (bar): 250 Connected power (kW): 7 Weight (kg): 48 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 15 Detergent tank capacity (l): 6 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 15m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Very clear and intuitive Easy-to-use control panel The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 69 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 13/18-4SX PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A built-in hose reel allows for easy rewinding and storage. A durable brass head with new ceramic pistons and seals guarantees long, trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 1300 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Flow rate (l/h): 1300 Working pressure (bar): 180 Maximum pressure (bar): 250 Pjdpfx Aey S T E Rofgjpt Connected power (kW): 9.2 Weight (kg): 69 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 20 Cleaning agent tank capacity (l): 6 EQUIPMENT: BUILT-IN HOSE REEL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limit Highly visible and Intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 49 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 7/18-4M PRESSURE WASHER This device features new accessories, including a gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 180 bar and 700 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: HD 7/18-4M Power supply voltage [V]: 400 Discharge capacity [l/h]: 700 Operating pressure [bar]: 180 Connection power [kW]: 5 Weight [kg]: 49 Dimensions [mm]: 467 x 407 x 1010 Hose [m]: 10 EQUIPMENT: NEW durable pressure gun Pjdpfx Afjy S Tlqsgjpt NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: reconditioned (used), functionality: fully functional, operating pressure: 210 bar, empty load weight: 62 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KARCHER HD 10/21-4S PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 210 bar and 1000 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1000 Operating pressure (bar): 210 Pressure Maximum pressure (bar): 250 Connected power (kW): 8 Weight (kg): 62 Dimensions (L x W x H) (mm): 560 x 500 x 1090 Hose length (m): 10 Cleaning agent tank capacity (l): 6 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE Pedpfx Afoy S Tcvogjpt KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service