Used Adhesive Melter (Defective) for sale (1,713)

Condition: used, functionality: fully functional, machine/vehicle number: 916xxxxx, Year of construction: 2018, operating hours: 1,626 h, load capacity: 2,500 kg, lifting height: 7,400 mm, free lift: 2,370 mm, fuel type: electric, mast type: triplex, construction height: 3,100 mm, fork length: 1,600 mm, empty load weight: 4,778 kg, total length: 2,961 mm, drive type: Elektro, construction width: 1,770 mm, opening width: 1,600 mm, Four-way reach truck Chassis number: 916xxxxx Load center: 600 Mast type: Triplex Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire size: Load rollers, polyurethane Rear tire type: Polyurethane Lhjdpfozmkm Ssx Amtoi Rear tire size: Drive wheel, polyurethane Battery voltage: 48V Battery Ah: 775Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2018 Description: Serviced, technically and visually refurbished, safety inspection passed, no warranty/liability for defects Fork positioner, integrated with side shift (within the vehicle’s dimensions) 3rd valve, 4th valve, semi-cab, impulse control, full free lift, fork positioner with side shift and fixed 1600 mm forks, Solo-Pilot, multi-directional forklift, pre-selection of lifting height, floor spot, panoramic mirror, fabric seat, 360-degree steering, battery (03/2018) with Aquamatik, external charger included

Condition: used, functionality: fully functional, machine/vehicle number: FN 55xxxx, Year of construction: 2017, operating hours: 5,787 h, load capacity: 4,500 kg, lifting height: 3,700 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,640 mm, power: 55 kW (74.78 HP), fork length: 1,150 mm, empty load weight: 6,358 kg, total length: 3,070 mm, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Chassis number: FN 55xxxx Load centre of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Ledpfxsvwhguo Amtohi Gearbox: Hydrostatic manual switch Condition: Reconditioned without guarantee Technical condition: very good Front tyres type: Superelastic Front tyres size: SE 300-15 Rear tyres type: Superelastic Rear tyres size: SE 28x9-15 Description: technically and visually refurbished, UVV approved and serviced, without warranty/liability for material defects Side shift, attached (4100 kg load capacity at 500 mm LSP) 3rd valve, 4th valve, rear work light, front work light, heating, full cabin, Solo pilot, interior mirror, additional air filter, quick couplings for 4th function, Load capacity 4100 kg with side shift, device has been refurbished by the manufacturer

Condition: used, functionality: fully functional, machine/vehicle number: FN 56xxxx, Year of construction: 2018, operating hours: 2,037 h, load capacity: 3,000 kg, lifting height: 3,500 mm, free lift: 1,650 mm, fuel type: gas, mast type: duplex, construction height: 2,390 mm, power: 38 kW (51.67 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,723 mm, drive type: Treibgas, construction width: 1,320 mm, Internal combustion forklift Chassis number: FN 56xxxx Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Transmission: Hydrostatic, manual shifting Condition: Refurbished, without warranty Technical condition: very good Front tire type: Superelastic Front tire size: SE 27x10-12 Rear tire type: Superelastic Rear tire size: SE 23x9-10 Description: serviced, technically and visually refurbished, safety inspection passed, without warranty/liability for defects Side shifter, integrated 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, full free lift, CE certificate, rear window, PVC side panel (right), lighting similar to STVZO (no road approval), Solo-Pilot (single lever), interior mirror, fabric seat, 4th function couplings on the fork carriage. Lhedjzmkm Espfx Amtei

Condition: used, Universelle Faltschachtelklebemaschine / Universal Folder Gluing machine Lhjdoznhtfspfx Amtoi Faltschachtelklebemaschine /  Folder Gluing machine ROPI UKM 380 Baujahr / Year 2003  Format / Size min. 60 x 100mm - 500 x 420mm Geschwindigkeit / (Belt) Speed max. 5.000 cycles/h. Materialgewicht / Materials 150 - 450g/m2 Dispersionskaltleim / dispersion adhesive Saugbandanleger für Non-Stop Betrieb / Suction belt feeder for non-stop operation Maschinendimensions / Machine dimensions Machine L 550cm x W 80cm x H 88cm Maschinengewicht / Machine weight 650kg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Lhsdpfody Hrdjx Amtei Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Specification Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Lhsdpfx Amjb Tmwastei Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter

Year of construction: 2013, condition: ready for operation (used), A CNC external cylindrical grinding machine Roweig requiring repair is available. Center height: 310mm, max. swing diameter: 600mm, max. grinding length: 1410mm, max. clamping length: 1500mm, max. grinding diameter: 600mm, max. workpiece weight: 500kg/120kg. Workhead speed: 500rpm, spindle taper: MT6, center point: MT5, swivel angle: -30°, tailstock cylinder compensation: +/-0.15mm, scale division: 0.001mm, max. dressing relief: 25mm, table speed: 10m/min, max. table travel: 1680mm. Wheelhead travel: 600mm, infeed speed: 10m/min. Grinding wheel dimensions X/Y/Z: 630mm/100mm/304.8mm, power: 11kW, max. speed: 50m/s, grinding spindles: 2, workpiece swivel angle: -30°/195°, spindle setting angle: -30°/15°. Machine dimensions X/Y/Z: approx. 5250mm/2450mm/2200mm, weight: approx. 7500kg, control: Siemens Sinumerik 802D sl. Spindle cooling defective. Documentation available. An on-site inspection is possible. Lodpfxszmylqs Amtjhi

Condition: used, Year of construction: 2011, lifting height: 31,600 mm, fuel type: diesel, color: red, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 31.200 kg Functional Lifting capacity: 1.000 kg Working height: 3.360 cm Dimensions of cargo space: 705 x 301 x 287 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: G-320DL30 4WDS/N Year of build: 2011 Condition: Used Data: Max. working height: 33,63 m Max. platform height: 31,63 m Lifting capacity: 1000 kg Lifting capacity on extension: 1000 kg Drive type: Diesel Platform dimensions LxW: 6,56 x 2,68 m Platform lenght pushed out: 9,56 m Total dimensions LxW: 7,05 x 3,01 m Transport height with / without railing: 3,62 / 2,87 m Movable up to working height: 33,63 m Ground clearance: 0,21 m Only indoor using: no Own weight: 31.200 kg Lhsdpfozmg Rtjx Amtsi Special features: white tires, automatic support system, 230V connection on platform, hydraulic supports, 4-wheel steering, all-wheel drive, attachment points for fall protection systems (PPE) available. Information: Function partially given, 2 wheels need to be replaced, PLC control + circuit board defective. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2009, lifting height: 24,500 mm, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 16.700 kg Functional Lifting capacity: 750 kg Working height: 2.650 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Additional information Please contact Christian Theißen for more information Manufacturer: Liftlux Model: 245-25 Year of build: 2009 Condition: Used Data: Max. working height: 26,50 m Platform height: 24,50 m Lifting capacity: 750kg Platform dimensions LxW: 5,50x 2,45 m Platform lenght pushed out: 7,80 m Total dimensions LxW: 5,75 x 2,55 m Lsdozmg Ncopfx Amtshi Drive type: Diesel Transport height with / without railing: 4,26/3,27 m Movable up to working height: 22,50 m Ground clearance: 0,26 m Only indoor using: no Non-marking tyres: no Own weight: 16.700 kg Special features: Automatic four-wheel support attachment points for restraint systems (PSA) Information: Steering cylinder leaking, function present, defective. Location: 41468 Neuss: immediately available

Condition: good (used), Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Lhodpfxozmx N Us Amtoi Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm Lsdpfezmx H Hex Amtohi 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T

Condition: good (used), Year of construction: 1998, functionality: fully functional, Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 max. wire diameter 12 mm max. wire cross-section 115 mm max. ejector stroke 90 mm max. ejector on the punch side 20 mm Motor approx. 15 kW Power max. 160 pieces/min, depending on the part to be manufactured 3rd station: optional deburring or forming Press Biauli BF17B, year 1998, 13 tons Oil pans 424 kg Conveyor belt 199 kg Control cabinet 205 kg Platform 186 kg Machine parts/accessories 565 kg Lhedpfx Aszd Da Hjmtei We sell the above items with exclusion of liability for defects in materials and workmanship and without any warranty on functions or their dimensional accuracy. No major defects are known to us, and the machine has functioned perfectly up to the present.

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: Lodpfx Amoxbmplotshi * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: used, mileage: 388,028 km, power: 103 kW (140.04 HP), first registration: 03/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 13 m³, loading space length: 4,125 mm, loading space width: 1,730 mm, loading space height: 1,945 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, soot filter, Vehicle No. for customer inquiries: 103 ----Damaged vehicle: Roadworthy! Noises from front axle, check engine light on, glow plug defective. ----Special equipment: * Climatic air conditioning (cab) * Rear view camera * Sliding door on both sides * Storage package 2 * Composition Colour audio system (radio/SD card interface/USB) * Exterior mirrors, electrically adjustable and heated * Wood flooring in the cargo area * Manual diesel particulate filter regeneration * Chassis: Reinforced damping and stabilizers, front and rear * Emergency call system * Digital radio reception (DAB+) * Hinges for rear doors with increased opening angle * Sliding door, cargo/passenger compartment, left * Seats in the cab: Double passenger seat with storage/tray compartment * Seats in the cab: Driver's comfort seat * Rear step integrated into the bumper * Trim in the cargo/passenger compartment: high wood paneling * Lashing rails in the cargo area - on the side wall ----Standard equipment: * Driver's airbag * Anti-lock braking system (ABS) * Drive type: Front-wheel drive * Convex exterior mirror, left * Convex exterior mirror, right * LED indicator lights integrated into exterior mirrors * Flooring in the cab: rubber * Underbody panel, aerodynamic drag coefficient * Double headlights * Two-tone horn * Entry handle on the rear pillar, left * Entry handle on the rear pillar, right * Electronic stability program (ESP) * Driver assistance system: Hill start assist * Driver assistance system: Brake assist (HBA) * Driver assistance system: Crosswind assist * Power windows, front * Windshield, laminated glass * 6-speed transmission * Grab handles, A-pillars * Rear wing doors without glazing * Interior lights in the cab: LED * Interior lights in the cargo/passenger compartment: LED * Body/superstructure: High-roof standard van * Body variant: High roof in vehicle color * Fuel tank: 75 liters * Radiator grille with chrome strip at the top * Partition wall, high, without window * Steering column (steering wheel) adjustable * Headlight range adjustment * Truck registration * Marker lights, side * Engine 2.0L - 103 kW TDI * Multifunction display Plus * Rear fog light * Wheelbase 4490 mm * Tire repair kit * Diesel particulate filter * Low emission according to exhaust standard Euro 6d-TEMP * Sliding door, cargo/passenger compartment, right * SCR system (AdBlue technology) * Power steering, electro-mechanical Lhedpfx Aozfukfemtji * Seat cover/upholstery: Fabric * Steel rims 6.5x16 * Start/stop system * Sockets (12V connection) in the cab (2 pieces) * Front bumper in gray * Daytime running lights * Lashing eyes, cargo area * Seat belt warning system (driver's side) * Immobilizer (electronic) * Heat-protective glazing * Central locking with remote control and interior operation * Permissible gross weight 3.50 t ----Technical data: * Wheelbase: 4,490 mm * Cargo area dimensions: L: 4,125 mm W: 1,730 mm H: 1,945 mm * Payload: 1,270 kg * Tire size: 235/65R16C * Tire tread: approx. 40% rear * Winter tires ----German vehicle! * €6,999 net plus VAT * MOT/emission test (TÜV) valid until 05/2027 * In case of export to third countries or EU, a security deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange! * Financing/leasing possible even in difficult cases * This description serves only for the general identification of

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center for Sale For sale is a well-maintained HOLZ-HER Evolution 7405 White Edition, manufactured in 2016. The machine is in very good technical and optical condition and can be demonstrated while powered on. The exceptionally low processing hours of only 788 hours with active feed are particularly noteworthy. In 2021, the machine was professionally serviced and completely realigned by the manufacturer. Since then, it has been used only sparingly and, as a result, runs smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of Manufacture: 2016 Machine Number: 7405_408 Software / Control CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Lhsdpfx Amsy Sicxstsi Active Feed / Processing Hours: only 788 h Machine ON: 6,723 h Equipment 4-MAT Version Drilling unit with 15 spindles Sawing and grooving unit Milling unit with 6-position tool changer Handheld control unit Vertical and horizontal machining Vacuum clamping system Ideally suited for: Furniture manufacturing Interior design Kitchen manufacturing Carpentry shops CNC entry-level or capacity expansion Condition Very well-maintained overall condition Regularly serviced Professionally realigned by the manufacturer in 2021 Only slight use since then Immediately ready for use Runs very smoothly and precisely No known technical defects The machine can be inspected and tested while in operation. Availability Available from week 25/2026. Inspection possible by appointment. Assistance with loading and transport organization is possible. Price Negotiable: €40,000 net

Condition: good (used), Year of construction: 2000, For sale is a used carton sealing machine (tape sealer) from Cyklop. The machine is ideal for automatically sealing cartons with adhesive tape (top & bottom) and can be easily integrated into existing packaging lines. Typical applications: * Shipping / Logistics * Warehousing & Fulfillment * Production / Packaging lines ⸻ ⚙️ Technical Information * Suitable for tape width approx. 50 mm * Carton size adjustable (width & height) * Integrated conveyor belt * Robust industrial-grade construction * Suitable for continuous operation 👉 Comparable models operate at approx. 20–23 m/min conveyor speed in newer versions ⸻ 📦 Condition * Used, reflecting its age Ljdpfxey Hf Sls Amtohi * Visual condition as shown in photos * Function: (insert here: running / untested / tested) ⸻ 📐 Advantages ✔ Fast and clean carton sealing ✔ Time savings compared to manual work ✔ Ideal for medium to high volumes ✔ Proven industrial quality by Cyklop

Condition: used, total length: 11,300 mm, total height: 4,000 mm, shelf height: 4,000 mm, support length: 2,700 mm, This package includes: 5 x uprights, 4000mm x 1,100m (blue) 24 x crossbeams, 2,700mm (orange) 48 x locking pins 5 x U-shaped impact protection 36 x shelf inserts Available from our Neuwied location. Creates a shelving row with 4 bays, each with 3 levels + floor space = a total of 48 pallet spaces (1000kg / pallet) Additional uprights and crossbeams are available for this system. Please contact us. Manufacturer: Stow Condition: used, good condition Height: 4,000 mm Length: approx. 11.3 m Shelf depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Shelf load: 3000 kg Bay load: 9000 kg Pallet spaces: 48 Accessories such as: Floor fastening Connectors Load warning signs Impact protection Guardrails Grating Back panel grating Deep shelf supports Barrier rails and much more... Just ask us! “Benefit from over 20 years of industry experience – we provide competent and personalized advice as your experienced specialist retailer for new and used shelving systems.” Sales and delivery conditions (B2B) - Prices & Logistics: All prices are quoted net from our location. Express delivery via our own fleet is possible upon individual agreement. - Offer status: All offers are non-binding. Subject to prior sale. - Reservation of ownership: The goods remain our unrestricted property until full payment (no disposal or processing permitted). Lhsdpszmdy Sjfx Amtoi - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Year of construction: 1999, condition: reconditioned (used), Rotary tablet press EU1"-441 – 29 stations + EU-B – 43 stations This high-performance tablet press is designed for the production of tablets with a maximum diameter of 25 mm using the EU-441 rotor and a maximum diameter of 13 mm using the EU-B rotor. The tablet press is suitable for producing shaped tablets (guided tooling). Technical specifications Max. pressing force: 100.0 kN Pre-compression: 100.0 kN Max. tablet diameter: 13.0–25 mm Max. filling depth: 18.0 mm (with corresponding filling curve) Max. tablet thickness: 8.5 mm Die speed: 15–120 rpm Performance EU-441: 26,100 to 174,000 tablets/h EU-B: 38,700 to 309,600 tablets/h The machine is equipped with four frameless, double-walled plastic doors. This makes the die table easily accessible for cleaning and tool changes. The main drive, gearbox, and a central lubrication system are located in the machine cabinet. At the rear of the machine is a connection for an external exhaust and filter system, which keeps the pressing chamber largely dust-free. Product feed The product is fed in via a stainless steel hopper and directed into the Fill-O-Matic mixing impeller shoe. From there, the dies are filled. The mixing impeller shoe can be easily removed for cleaning. The finished tablets are discharged via a discharge chute and collected. Rejected tablets are automatically separated via a sorting diverter. Monitoring system The machine features a monitoring system with: Tablet jam monitoring Level control Filling hopper monitoring Measurement of the resistance of the punches Ejection force measurement Individual rejection The system enables: Statistical evaluation Documentation via printer Permanent press force monitoring Automatic adjustment of the press force Automatic rejection of defective tablets Quick stop in case of exceeding limit values. Electrical equipment The electrical installation is located in a separate control cabinet, which can be positioned independently of the machine. The following additional devices can be connected: Vertical dust collector Metal detector. Scope of delivery Machine without tableting tooling Filling curves for: EU-441 (10 mm and 12 mm) EU-B (8 mm) The changeover rotor is located on a Fette rotor trolley, which is included in the scope of delivery. If required, a control system upgrade can be offered. Machine and operating manual as well as validation documents are available in German. Condition Approx. 34,000 operating hours Regularly maintained Lodpfozl Tigex Amtehi Very good mechanical and visual condition.

Year of construction: 2019, condition: used, machine/vehicle number: E61MI19122799286, This is a combination steamer CMP 61 from the premium manufacturer Rational, in an electric version (left-hinged door), manufactured in 2019 and equipped with a fully automatic self-cleaning system! The unit has undergone a thorough inspection in our in-house workshop and is fully functional. The base shown in the picture is not included in the offer, but can be purchased as an option. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the optimal choice if you are looking for a classic combination steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The Combi Master® from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Power connection: 400 V / kW: 11.0 / 50-60 Hz Capacity: 5x1/1 GN Weight: approx. 103 kg Serial number: E61MI19122799286 Year of manufacture: 2019 Condition: used, inspected, fully functional Ledpfx Amszmf A Ujtshi Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the optimal serving temperature under optimal conditions Automatic separation of fat for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-glazed door (swivels for easier cleaning) Core temperature measurement by means of a sensor Cool-down function Fully automatic self-cleaning High-performance fresh steam generator (automatic flushing and emptying) Hand spray with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Subject to changes and errors. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal Lhodpfezlh Ausx Amtoi passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: ready for operation (used), Year of construction: 2016, Laminating press manufactured in 2016. This MASTER PUR-1400 is a professional, high-performance laminating line designed for single-sided panel lamination using PUR Hot Melt adhesive. It features a working width of 1,400 mm and can handle maximum panel sizes of 2,800 × 1,300 mm. If you are looking to get high-quality laminating capabilities, consider the MASTER PUR-1400 laminating press we have for sale. Contact us for further details regarding this machine. • Process: Single-sided lamination with PUR hot melt adhesive • Applications: Furniture panels, interior components, wall panels, decorative boards • Suitable substrates: MDF, particleboard, plywood, PVC boards, gypsum boards, other wood-based panels • Compatible surface materials: Acrylic sheets (high gloss & super matt), PET foil, PVC foil, HPL, CPL, decorative paper • Working width: 1,400 mm • Maximum panel size: 2,800 × 1,300 mm • Panel thickness: 2–40 mm • Production speed: 5–17 m/min • Output capacity: 3–5 panels/min • Maximum productivity: up to approx. 1,200 panels per 8-hour shift • Installed motor power: 21.49 kW • Heating power: 51.7 kW • Overall machine dimensions: approx. 16 × 2.5 × 2 m • Required installation area: minimum 6 × 22 m • Line includes: • Automatic loading system with roller conveyor • Panel cleaning brush unit • Infrared (IR) preheating oven • 3-roll PUR adhesive application system • Decorative material feeding station • Pressure roller laminating press Ledpjzmhbtsfx Amtehi • Discharge conveyor • 208-litre PUR hot melt adhesive melting unit • Advantages: Excellent laminating quality, uniform PUR application, suitable for high-gloss and super-matt acrylic, low adhesive consumption, stable continuous operation, high efficiency, easy operation and maintenance • Condition: Used

Condition: ready for operation (used), Year of construction: 2017, Edgebander manufactured in 2017. This SCM Olimpic K360 T-ER1 features a feed speed of 11 m/min and accommodates edge thicknesses from 0.4 to 6 mm. It includes a pre-milling unit with counter-rotating diamond heads, an EVA glue unit, and a buffing unit. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K360 T-ER1 machine we have for sale. Contact us for further details. Lhsdpfx Amozmgviotoi • Feed speed: 11 m/min • Edge thickness: 0.4–6 mm • Panel thickness: 8–60 mm • Min. workpiece: 140 x 90 mm • Power supply: 400 V / 3~ / 50 Hz, 23 AAggregates: • Pre-milling: 2 counter-rotating diamond heads (up to 3 mm removal) • EVA glue unit • Pressure zone with driven roller + 2 pressure rollers • End-cutting unit K-2 (straight/bevel, automatic switching) • Top/bottom trimming: flush, radius, chamfer • Corner rounding R1/R2 • Profile and flat scrapers • Buffing unit • Anti-adhesive fluid system (2 fluids) • Edge roll feeder

Condition: ready for operation (used), Year of construction: 2023, Edgebander manufactured in 2023. This BIESSE Akron 1440 A features a panel height range of 10-60 mm and an edge height of 14-64 mm. It supports roll edge thickness from 0.4-3 mm and strip edge thickness from 0.4-12 mm. The machine includes a chain feed speed of 12 m/min and is equipped with an NC axis package for automatic setup. If you are looking to get high-quality edge banding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. edge banding machineBrand: BiesseType: Akron 1440 Ayear of manufacture: 2023Technical data: • Panel height: 10–60 mm • Edge height: 14–64 mm • Roll edge thickness: 0.4–3 mm • Strip edge thickness: 0.4–12 mm • Panel overhang beyond the chain: 25 mm • Panel length: 140–3200 mm • Minimum panel width (with panel length 140 mm): 85 mm • Minimum panel width (with panel length 250 mm): 50 mm • Chain feed speed: 12 m/min • Distance between panels: 450–650 mm • NC axis package for automatic machine setup • Return conveyor installation kit • Notes: • Minimum panel height 8 mm with max edge thickness 1.5 mm. • Values marked “depending on the selected working units.” Max permissible feed speed 12 m/min. • Aggregates/working units: • Anti-adhesive spraying unit ADZ02 • Pre-milling unit RT02 • Two high-frequency motors, each 1.8 kW, 12,000 rpm • Gluing unit VC-511 • Processes EVA and PUR granulated adhesives • Adhesive container capacity: 1.5 kg • Pressure zone • 1 driven pressure roller, Ø 100 mm, independently adjustable pressure • 2nd and 3rd non-driven pressure rollers, Ø 60 mm, anti-adhesive coating, opposing conical, pneumatically adjustable • End trimming unit IT-70-S • Two high-frequency motors, each 0.8 kW, 12,000 rpm • Straight (0°) or inclined trimming, adjustable 0°–15° • Antistatic/cooling liquid spraying unit for end trimming Lhjdpezmglwefx Amtsi • Fine milling unit RF02 • Two high-frequency motors, each 0.65 kW, 12,000 rpm • Corner rounding unit • Two high-frequency motors, each 0.65 kW, 12,000 rpm • For straight and postforming/softforming profiles on 90° and 180° corners • Edge scraping unit RB02 • Manual switching between two processing profiles • Glue joint scraping unit RC02 • Buffing unit SZ02 • Two motors, each 0.37 kW, 2,800 rpm • Hot air blower unit PH-501 • Power: 2 kW; continuously adjustable temperature control

Condition: new, Year of construction: 2025, functionality: fully functional, Specification Automatic width and height measurement, automatic application of adhesive to longer sides, automatic application of adhesive to shorter sides, automatic adhesive spraying. • Rollers coated with a non-stick coating. • Fully automatic servo motor that adapts to different product specifications. • Movable adhesive spray guns (2 adhesive lines). • Steel construction, stable. Technical Data Machine dimensions: 10500*2300*1800mm Output: 5-8 pieces/min Power: 13KW Rated current: 34A Rated air pressure: 0.6MPa, flow rate: 20-100L/min Control voltage: 24VDC Operating voltage: 380V/50Hz/ three-phase Package length: 300～2900mm Package width: 180～1200mm Package height: 30-150mm Main structure: Steel frame Corrugated cardboard: From 2.5 to 7 mm Aluminum profiles: 6061 aluminum Lhedpfeznwccsx Amtji Machine weight: ≈3.8T

Condition: ready for operation (used), Year of construction: 1997, operating hours: 113,881 h, functionality: unexamined, machine/vehicle number: 32833, total length: 6,500 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 11,500 kg, For sale is a used machine from a site closure. Sale is made with the exclusion of any warranty for defects. Ledszl S Rpjpfx Amtohi The machine has not been inspected but was in working order until the end.