Used Agie Charmilles Die-Sinking Edm for sale (4,861)

Year of construction: 2006, condition: refurbished (used), AGIECUT Challenge 3 eCut Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE generator with eCut technologies for faster and more efficient processing Duedpogfm Rrjfx Abfju Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of the order. We then put the machine into operation on your premises. You receive a 6-month warranty on the machine. We are happy to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transportation

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. Djdpfx Abjv Dkvrsfouu You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Dodpox Uxglsfx Abfsuu Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 200 kg, quill stroke: 250 mm, AGIE Spirit 2 Year of manufacture: 2005 APG FORM Control Travel paths: X = 300 mm, Y = 250 mm, Z = 250 mm Max. workpiece size: X = 500 mm, Y = 400 mm, Z = 185 mm Max. workpiece weight: 200 kg Max. electrode weight: 25 kg Distance table – chuck: 190 – 440 mm AGIE APG Spirit Generator – Working current 80 amperes Best achievable surface finish Ra 0.2 µm Including pneumatic chuck Erowa ITS 50 or 3R (at your choice) Including 4-position electrode changer in the magazine Dsdpfxext N Hko Abfjuu Net machine weight: 1,280 kg Machine dimensions (L x W x H): 1850 x 2100 x 2360 mm The machine will be cleaned, serviced, and subsequently tested after receipt of order. We are happy to commission the machine for you as well.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Challenge V2 Year of construction 2007 Travels (X/Y/Z): 350 x 250 x 256 mm Travels (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Dodpfewqcm Ujx Abfjuu Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine will be cleaned, overhauled and tested by us upon receipt of order. We are also happy to offer commissioning and training.

Year of construction: 2005, condition: refurbished (used), AGIECUT Progress 3 Year of manufacture 2005 travels: X= 500 mm, Y= 350 mm, Z= 426 mm travels U/V-axis: +/- 70 mm maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Dodpogzv Scofx Abfsuu Maximum workpiece weight: 400 (in bath) / 800 (without bath) kg Achievable surface quality: Ra: 0.30 µm Maximum cutting rate: 500 mm²/min Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage Maximum threadable height: 420 mm With manual front door (accessible from 1 side) Incl. AGIEJOGGER- hand box for comfortable set-up AGIE IPG high performance generator AGIEVISION control system Dimensions (length x width x height): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine will be overhauled and extensively tested by us You get 6 months warranty on the machine. We are also happy to offer you commissioning and training

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Djdpfx Abezadkxofjuu

Year of construction: 2004, condition: ready for operation (used), Number of axes: 4, x-axis: 400mm, y-axis: 300mm, z-axis: 350mm, connected load: 8.3kVA, rated current: 12A, weight: 3t, equipment: rotary quill, controlled C-axis, CNC conversational control system with 4 axes, hand-held control unit, tool holder: Erowa ITS quick-clamping chuck, 20-position electrode changer, paper cartridge filter. An on-site inspection is possible. Dedpezadk Ejfx Abfsuu

Condition: ready for operation (used), Year of construction: 2007, operating hours: 56,908 h, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 525 mm, total height: 510 mm, total width: 1,000 mm, wire diameter (max.): 0.3 mm, product length (max.): 1,300 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AgieCharmilles AGIECUT PROGRESS V4 was manufactured in 2007. It features a maximum workpiece dimension of 1,300 mm x 1,000 mm x 510 mm and can handle a maximum workpiece weight of 3,000 kg. The machine offers impressive axis travels, including X-axis travel of 800 mm and Y-axis travel of 550 mm. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AgieCharmilles AGIECUT PROGRESS V4 machine we have for sale. Contact us for further details. Duedpfx Abey Uxd Defsu • Capacity & workpiece dimensions: • Max. workpiece size (L x W x H): 1,300 mm x 1,000 mm x 500/510 mm • Max. workpiece weight: 3,000 kg • Axis travels: • U/V-axis: ±70 mm • Max. taper angle: ±30° at 500 mm height

Condition: repair required (used), Year of construction: 1987, Die sinking machine AGIE Type:EMT 1.20 Year.1987 travels : X250 mm Y 160 mm Z 200 mm with R3 adjusting head . Dodpfxjix Nqhe Abfsuu Further data in the data sheet .

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, wire diameter (max.): 0.3 mm, overall weight: 3,900 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details. • U/V axes travel: ±70 mm • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cut: up to ±30° • Generator: MC 3S (Lista 030.844) • Axis driver (DA): DA MC 3S (Lista 030.834) • Electrical cabinet: Cabinet Classic 3S (Lista 027.254) • Power supply voltage: 3×400 V / 50 Hz • Installed power: 9 kVA • Rated current: 14 A • Dielectric: Deionized water • Heads type: Submerged with wire guide nozzles • Wire drive motor: +GF+ / Maxon Motor (Swiss made) • Circuit diagram: 628.992 Additional equipment • MTA chiller (included in the sale) • Resin filters Dusdpfx Aboy Ulp Tjfou • Deionizers • Wire feed/recovery system

Year of construction: 2004, condition: repair required (used), X-axis: 800 mm // 900 mm/min Y-axis: 600 mm // 900 mm/min Z-axis: 400 mm // 900 mm/min U/V: 60 mm Workpiece: X: 1300 mm Workpiece: Y: 910 mm Workpiece: Z: 400 mm Max. table load: 2,300 kg Main electronic connection: 400 V / 50 Hz / 3P Total power requirement: 10 KVA Air pressure: 6 bar Dielectric tank: 250 liters Technical attributes Z-motion: 400 mm X-motion: 800 mm Y-motion: 600 mm Weight approx.: 4,700 kg Approx. onsite dimensions (L x W x H): 1,950 x 2,550 x 2,000 mm. Manuals and documentation included. Not working; we suspect the power supply. Mechanical condition is very good. Dujdpfox Hxikox Abfeu

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Dodpfx Abey R Adyefsuu Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, Charmilles Robofil 4030 SI-TW Wire-Cut Electro-Discharge Machine. Serial No. 174621 (2002).Country of Origin: Switzerland Djdpey Rz Nzofx Abfjuu Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min Dsdjw Spa Nopfx Abfjuu rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: excellent (used), Professional portable EDM (Electrical Discharge Machine) from the renowned German manufacturer Waldmann + Weigel, model EROMOBIL ER 400T. This machine is designed for precise removal of broken bolts, threads, drills, as well as for EDM drilling operations. Ideal for workshops, toolmaking facilities, and maintenance departments. Mobile set – mounted on a transport trolley with pump and cooling system. — Technical specifications: • Manufacturer: Waldmann + Weigel GmbH • Model: EROMOBIL ER 400T • Year of manufacture: 1993 • Power supply: 400V • Frequency: 50 Hz • Power: 6 kVA • Current: 16 A • Adjustable erosion voltage • Integrated dielectric pump — Applications: • Removal of broken bolts and threads • EDM hole drilling • Machining of hardened materials • Service and production tasks — Equipment: • Working head • Control unit • Pump + fluid reservoir • Cables • Set of electrodes (as shown in the photos) • Transport trolley — Condition: Used, in working order. Shows normal signs of use (visible in the photos). Complete machine, ready for operation. Djdpfx Ajy Dik Tsbfsuu — Additional information: • Inspection possible on-site • Pallet shipping available • Personal collection

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: AGIE, number of axes: 3, This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details. • EROWA ROBOT MULTI with 60 ITS 148 Places and 240 ITS 50 Magazine Places Dsdoy S A Dcjpfx Abfouu

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Djdpfey R Dtcox Abfjuu

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, TS1600 creasing and die cutter machine is an indispensable piece of post press equipment which is widely used for die cutting, and creasing of adhesive stickers, carrier bags, book covers, packing boxes, greeting cards, desk calendars, corrugated cartons, etc. It can effectively cut the desired material into large numbers of the same shape. Max. die cutting size Djdpfx Aoy Sz S Ssbfeuu 1600 mm X 1200 mm Working speed 20±2 pieces/min Machine is at our premises, testing on-site is possible.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 Dodpjy Snm Nefx Abfouu o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Year of construction: 2002, condition: ready for operation (used), Travel X/Y/Z: 350mm/250mm/256mm, travel U/V: +/-70mm, max. taper angle: 30°, max. height: 100mm, rapid traverse: 900mm/min, max. workpiece dimensions X/Y/Z: 750mm/550mm/150mm, max. workpiece weight: 200kg, max. threading height: 250mm, wire tension: 25N. Machine dimensions X/Y/Z: approx. 1650mm/2050mm/2250mm, weight: approx. 2600kg, control: Agievision. Documentation available. An on-site inspection is possible. Dodpfjy N Uwijx Abfsuu

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, overall weight: 2,650 kg, input frequency: 50 Hz, Possible accessories can be discussed on site. Dujdpfxsy Irdks Abfeu

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total width: 1,600 mm, wire diameter (max.): 0.3 mm, overall weight: 2,500 kg, product length (max.): 1,800 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis CHARMILLES TECHNOLOGIES Robofil 290P was manufactured in 1999. It features a travel range of 400 mm x 250 mm x 200 mm and can accommodate a maximum workpiece weight of 500 kg with dimensions of approximately 850 x 500 x 200 mm. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES TECHNOLOGIES Robofil 290P machine we have for sale. Contact us for further details. • UV-axes (taper): 400 x 250 mm • Max. workpiece weight: 500 kg • Max. workpiece dimensions: approx. 850 x 500 x 200 mm • Automatic wire threading: Yes • Control system: Charmilles Additional equipment • Extended filter system • Automatic restart Djdjy Ifl Ispfx Abfjuu • Cross rail • Wire tension measuring device

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, overall weight: 2,500 kg, number of axes: 3, This 3-axis CHARMILLES ROBOFORM 35P die-sinking EDM machine was manufactured in 2002. It features a travel range of 350 mm in the X-axis, 250 mm in the Y-axis, and 300 mm in the Z-axis, with a maximum workpiece weight of 500 kg. The machine is equipped with a 32-position rotary tool changer and a high-speed Z-axis for enhanced performance. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES ROBOFORM 35P machine we have for sale. Contact us for further details. • Table dimensions: 400 x 500 mm • Maximum workpiece weight: 500 kg • Dielectric capacity: 400 l • Rotational axis: C-axis • Z-axis type: High-speed Z-axis • Tooling interface: Combi chuck • Tool changer: 32-position rotary changer • Electrical: 380 V, 3 Ph, 50 Hz, 5 kVA, 5 A • Safety: Integrated fire extinguishing system Dsdpsy Idtkjfx Abfsuu Additional equipment • Eckert cooling unit • Measuring probe (touch probe)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 9,447 h, functionality: fully functional, Agie Classic V2. Excellent condition. Machine available for inspection at our facility in Semsales. New PC and console. Dodpfsy Inxqox Abfsuu