Used Airtech-Parker Nitro-Source Plus for sale (6,725)

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 Nwodpfx Aoy Sub Hjhnsk • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Nodpsy R U Abjfx Ahnjwk Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package Nwodpfx Ajziznfehnek – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), functionality: fully functional, load capacity: 3,000 kg, Used Meta cross beams for sale. - Length: 2,800 mm - Height: 120 mm - Width: 50 mm Price: €23 (net) plus VAT. Available: 500 units Racking systems | Sales • Assembly • Disassembly • Repair | MM Lagertechnik We are happy to provide you with a non-binding quote – customized to your specific requirements. Our services: ✔ Sale of warehouse racking ✔ Assembly & disassembly ✔ Repair & maintenance ✔ Purchase of used racking systems ✔ Racking inspections according to regulations ✔ Training in warehouse technology We support you with the planning, delivery, and professional installation of your warehouse and industrial equipment – reliably and efficiently. Thanks to our many years of experience in warehouse technology, we provide service to: Small businesses Medium-sized companies Nsdjy Itvujpfx Ahnswk Industrial enterprises from various sectors With us, you receive everything from a single source – from planning to execution. Note: This advertisement does not constitute a binding offer. After you contact us, you will receive a tailored offer to suit your requirements.

Condition: like new (used), shelf height: 7,800 mm, Used Meta frames for sale. Frame dimensions: - Length: 7800 mm - Depth: 1100 mm Nodpfx Ahjy Itvzjnswk Price per unit: €170 plus VAT. Available: 150 units Racking Systems | Sales • Assembly • Dismantling • Repair | MM Lagertechnik We are happy to provide you with a non-binding offer tailored to your specific needs. Our services include: ✔ Sale of warehouse racking ✔ Assembly and disassembly ✔ Repair and maintenance ✔ Purchase of used racking systems ✔ Racking inspections according to regulations ✔ Training in warehouse technology We support you with the planning, delivery, and professional installation of your storage and operational equipment—reliably and efficiently. With our many years of experience in storage technology, we serve: - Small businesses - Medium-sized companies - Industrial enterprises from various sectors With us, you receive everything from a single source—from planning through to implementation. Note: This listing does not constitute a binding offer. After you contact us, you will receive an individual offer tailored to your requirements.

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Nwodpozbvqgsfx Ahnek Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun

Condition: new, Hydraulic Thread Tapping Machine Manufacturer: CMA Model: RHR 24D Plus Condition: New machine Standard features: Nwjdpsyazfysfx Ahnjk - Ball-bearing parallel arm - Hydraulic unit - Digital speed display - Digital depth adjustment - Clamping table 800 x 600 mm (T-slot: 19 mm) - Quick-change chuck - Micro spray system for tool lubrication - Base frame - Operating manual

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ADR hazardous goods Coupling height: 1150 mm FROZEN WHITE - 7VTAWWA Retarder 4-bag air suspension, maintenance-free fifth wheel, FDR 2.31, ADR hazardous goods, sun visor, LED, retarder, upper bed, technology package 5 Cab paint: Frozen White Fixed co-driver's seat Without upper bed Warm air auxiliary heater Navigation system Electrohydraulic steering with three driving modes (Comfort, Balance, Direct) Wheelbase 3750 mm ADR 4-bag air suspension (rear axle) Bright dashboard Window film, 4-bag air suspension, 980 mm, LowLiner, 355/50, FDR 2.31, winter package with heated windscreen, sun visor, LED, retarder, air pressure horn, technology package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Fifth wheel height 980 Front overhang 1450 Rear overhang 873 Total length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 LITER SCR TANK Fuel tank 372 liters 600 LITER MAIN TANK Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane keeping assist Emergency brake assist Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver's seat (premium upholstery) Auxiliary heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilt mechanism LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Light automation Leather steering wheel Steering wheel controls 8" instrument panel Multimedia system with 7.2" touchscreen External sun visor Roof spoiler Side spoiler Side skirts In-vehicle internet Nwjdpfxjyvm Ndj Ahnsk

Condition: used, mileage: 1,595 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Coupling height: 1150 mm FROZEN WHITE - 7VTAWWA Retarder 4-bellow air suspension, 1200mm, 315/80, final drive ratio 2.47, CB radio pre-installation, sun visor, LED, retarder, NH4C, side trim panels, Technology Package 4 Cab paint: Moondust Silver Fixed passenger seat Without upper bunk Hot air auxiliary heater Navigation Electro-hydraulic steering with three driving modes (Comfort, Balance, Direct) 4-bellow air suspension (rear axle) Light-colored dashboard Window decals, 4-bellow air suspension, 980mm, LowLiner, 355/50, final drive ratio 2.31, Winter Package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Coupling height 980 Front overhang 1450 Rear overhang 873 Overall length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 L SCR tank Diesel tank 372 liters 600 L main tank Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane departure warning Emergency braking assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver's seat (high-quality upholstery) Auxiliary heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilt system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Light automatic system Leather-wrapped steering wheel Multifunction steering wheel switches 8" instrument cluster Multimedia system with 7.2" touchscreen Exterior sun visor Roof spoiler Side spoilers Side skirts On-board internet Nwjdpfx Aheyvm Nqjnok

Condition: ready for operation (used), REMS press tool, cordless press ACC Li-Ion Plus, Used machine Manufacturer: Rems Type: ACC Li-Ion Plus Overall dimensions: Width: 520 mm Depth: 290 mm Height: 120 mm Key features: Electro-hydraulic drive Pressing force: 32 kN Suitable for pipe press fittings Ø 10–108 mm (up to 110 mm in some cases) Nsdpfx Ajxl E Nfohnewk Universal motor: 1850 W Battery: Li-Ion 14.4 V / 3.0 Ah (Li-Ion Plus technology) Multifunctional electronics: soft start, overload protection, automatic retraction (ACC) 360° rotatable jaw holder Built-in LED work light Ergonomic, lightweight design: approx. 4.3 kg Condition: Used, in good working order. Accessories: battery, charger

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Njdexfrv Eopfx Ahnjwk Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: used, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2015, next inspection (TÜV): 04/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 223,613 km Nsdpfeym H I Hex Ahnowk Body interior / exterior: * Sliding curtain on left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated outer frame (Multilock) * Pallet stops on left and right * Screen-printed floor for 7,100 kg forklift axle load * 23 aluminum insert slats * 3 pairs of sliding rings, adjustable * Rear portal doors with double locks * Access ladder * Storage box * Reversing lights * Rear fog lamp Chassis / other equipment: BPW Eco Plus axles * Air suspension * Raise and lower function * ABS, EBS * 385/65 R 22.5 tires * Remaining tread approx. 5 - 15 mm ---- Non-binding offer from Bocholt location. Subject to prior sale and errors. Sale only to traders or for export.

Condition: used, maximum load weight: 29,510 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2016, next inspection (TÜV): 10/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 349,026 km Body interior / exterior: * Sliding curtain left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated external frame (Multilock) * Pallet stop left and right * Anti-slip phenolic plywood floor suitable for forklift axle load up to 7,100 kg * 36 aluminum insert slats * 3 pairs of sliding rings, adjustable * Rear portal doors with double locks * Access ladder * Toolbox * Reversing lights * Rear fog light Chassis / additional equipment: BPW Eco Plus axles * Air suspension * Height adjustment (raise and lower) Nwsdpoym H I Tjfx Ahnek * ABS, EBS * Tires 385/65 R 22.5 * Remaining tread approx. 7 - 14 mm ---- Non-binding offer from location Bocholt, subject to prior sale and errors. Sale only to commercial customers or for export.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 12200991016, rotational speed (min.): 24,000 rpm, overall weight: 1,635 kg, tool weight: 2,900 g, input voltage: 400 V, For economical and efficient machining of aluminium, plastic and thin-walled steel profiles All machining processes such as milling, drilling and thread cutting take place on a stationary profile, protecting the profile surface Improved work results thanks to the use of intelligent control technology Fast positioning of the machining unit at up to 60 m/min thanks to the use of dynamic servo drives Thread cutting without compensating chuck Automatic clamp recognition and positioning Automatic tool magazine with four tool shelves (without tools) Modern, 3-axis control Ergonomic work thanks to the use of a modern inclined bed No need for a reference movement of the axes thanks to the use of absolute encoder-based systems Collision avoidance thanks to automatic clamp recognition and positioning Nedpfxjwgmyqs Ahnswk Power-Torque milling motor with closed speed control ensures short start-up and deceleration times spindle Certified, drive-integrated safety functions Low power consumption thanks to intelligent control technology Increased energy efficiency thanks to the connection of axis drives between circuits Uninterruptible power supply (UPS) Windows operating system 15.6" Panel PC, i3 processor, USB ports and network interface Easy and convenient program entry via eluCam on the operator panel, even during machining Remote online maintenance Machine equipment Air-cooled 8 kW milling spindle, S1 Cabin for operator protection Four horizontal pneumatic clamps for clamping the material Material stop, left side HSK-F63 tool holder Minimum quantity lubrication High-performance coolant Manual control panel Depth gauge Options Tools Tool holders Automatic tool magazine for up to four standard tools Automatic tool magazine for angle head Rotating head HSK-F63 angle for two tools Green-line cooling unit for control cabinet with reduced energy consumption Barcode scanner Protective cabin, optionally with all-round closure Four clamps as standard. Expandable to eight clamps Right reference material stop for placing workpieces with overlength processing Additional stop for overlength processing on the left Length measurement on both sides Double clamp and additional accessories upon request Panel PC 18.5", i5 processor Panel PC 21.6", i7 processor Note holder Sound-absorbing hood Chip disposal using chip trays

Condition: excellent (used), Year of construction: 1986, Cryolor gas tank semi trailer for oxygen, nitrogen, argon cryogenic, carbon dioxide, LIN, LOX, LAR,CO2 Manufacturer: Cryolor, France Year of Manufacture: 1986 Type: EFM 17000 Total Capacity: 17,410 liters Njdpfx Ahjwmmakjnswk Tare Weight: 10,050 kg Gross Weight: 22,000 kg Working Pressure: 20 bar Test Pressure: 27.32 bar Tank Code: R 27.3BN Insulation: Vacuum insulated The tank is for the transport and storage of deep-cooled liquid gases such as nitrogen, oxygen, argon, or CO₂. Contact us for more information or to arrange a viewing.

Year of construction: 2004, condition: used, Used Kilian E 150 PLUS single sided rotary tablet press. Has stainless steel covers. 26 stations capable of up to 16 mm tooling, EU-B of toolings. Manually adjustable fill depth up to 20 mm. Pre-pressing at 23 kN and manually adjustable main pressure up to 100 kN (10 tons). Maximum capacity 162 800 tablets per hour. Stainless steel change-speed forsed feeder. Press is driven by el. Motor 4kW/3ph/400V/50hz with frequency changer. New 2004. Njdpfx Ahswm Ar Asnowk

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Nedpfx Ahevdqbhonewk Control unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Condition: used, Single-acting hollow piston cylinder with spring return ENERPAC Hydraulic ram, hydraulic cylinder, hollow piston cylinder, machine lifter, clamping cylinder Model: BRH 1003, predecessor of RCH 1003 Lifting capacity: 100 tons Operating pressure: 700 bar Piston stroke: 76 mm Piston rod diameter: 127 mm Outer diameter: 215 mm Closed height: 255 mm Through-hole diameter: Ø 79 mm Internal thread: Ø108 mm 12G" Hydraulic connection thread on cylinder: M18x1.5 - Hydraulic connection with high-flow quick-coupling type CH-604, thread M30x1.5 mm Net weight: 55 kg Nsdpsxciuaefx Ahnjwk Very good condition 16 units available, price per unit

Condition: used, Please contact Team DPX for more information Restproducten te koop: Surplus items for sale: DPX-25081 - CAT 254-2267 - € 50,- DPX-25080 - CAT AVR 582-9033 - € 750,- DPX-30022 - CAT Control unit 604-9581 - € 250,- DPX-34103 - DSE 8620 MKII Controller - € 2.000,- DPX-35030 - Aisikai ASKW1-3200 Breaker 2500A - € 2.750,- DPX-00000 - CAT DE165GC Canopy - € 1.000,- DPX-25092 - FPT Iveco Air filter pn 8037883 - €165,- Nwsdpfsw Sq Uhjx Ahnok

Condition: new, Year of construction: 2026, HIGH RANGE TECHNOLOGY AT THE LOWEST PRICE IN THE MATKETPLACE, DON'T MISS THE CHANCE. CUSTOMER SATISFACTION IS OUR MAIN TARGET CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. GENERAL TECHNICAL SPECIFICATIONS Plant type: Mobile concrete plant with Bunker Feeding and Horizontal shaft mixer Plant Capacity : 100m³ / hour compressed fresh concrete Nwjdpfogxmurjx Ahnjk Mixer Capacity : 2000 Liter (2m³ Compressed Concrete) Mixer Type : Double or Single Shaft Mixer Total Motor Power : 110 kw Standard Value. It may vary depending on the equipment. Voltage / frequency : 380V / 50Hz Standard Value Electronical equipment : Siemens Other equipment & accessories : Italy / Germany Automatic lubrication system (ILC : ITALIAN) ALL IN ONE (with software package), printer, uninterruptible power supply and SCADA software package, all control and monitoring processes, all kinds of reporting, failure notifications, etc. This process is done on the computer screen and with animation support. FOR MORE INFORMATION PLEASE CONTACT US NOW Whatsapp / Viber

Year of construction: 2021, condition: new, Fiber delivery cable with instalation ( splicing )on your IPG, Maxphotonic , Raycus, GW.... laser source. We are doing reparation IPG laser module in your place with warranty. Speaking English and Serbian language. Nwedpfxjg D Urgs Ahnsk

Year of construction: 2004, condition: excellent (used), 3D coordinate measuring machine in a stand-alone design *Floor-mounted installation on steel feet *Height from floor to measuring plate: 600 mm Measuring range *X 3,200, Y 1,600, Z 1,800 [mm] Measurement uncertainty *30 + L/40, max. 60 [µm] at L = 3,000 mm Nodpjhlqknofx Ahnswk Dynamics *3D traversing speed: 220 mm/sec *3D acceleration: 1000 mm/sec² Probing system *Renishaw PHS / alternatively PH10M *Renishaw TP20+2 modules Control system *Pantec Eagle Pro Wireless control unit *Handheld control unit HT400 Software POLYWORKS Inspector Optional technologies Probe changer MCR20 Probe changer ACR3 Optical scanner KREON or NIKON Supplier’s services Transport, commissioning, calibration, final acceptance Warranty 12 months, from the date of acceptance

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture Plus XT - High-precision multi-sensor measuring system for very large workpieces The Baty Venture Plus XT is a sophisticated multi-sensor measuring system specially developed for the inspection of very large and complex workpieces. It offers outstanding precision and flexibility for companies that need to perform demanding quality checks. The robust design, combined with state-of-the-art CNC control and Fusion 3D software, enables automated and repeatable measurements on a large scale. Available models: VP-80100-CNC-XT With a measuring range of 800 mm x 1000 mm x 460 mm, this model offers the perfect solution for large workpieces. The combination of optical and tactile measurements enables precise data acquisition. The model is ideal for applications where medium to large components need to be measured efficiently and accurately. VP-80160-CNC-XT This variant has an extended measuring range of 800 mm x 1600 mm x 460 mm, making it ideal for longer and more complex workpieces. With the integrated 6.5:1 zoom optics and programmable LED lighting, this model offers high flexibility for the precise inspection of workpieces of different sizes. VP-100120-CNC-XT This model has a measuring range of 1000 mm x 1200 mm x 750 mm and is perfect for very large workpieces. The sturdy aluminum construction and the air bearing axes ensure maximum accuracy, even with heavier workpieces. The fully automatic CNC control and the user-friendly Fusion 3D software make it quick and easy to create inspection programs. VP-100200-CNC-XT With an impressive measuring range of 1000 mm x 2000 mm x 750 mm, this is the largest variant of the Venture Plus XT available. This model is designed for the inspection of extremely large components and offers maximum precision and flexibility. Thanks to the Fusion 3D software, CAD import/export and DXF overlays can also be used with this variant to perform complex measurements. Common functions: Nwjdpfx Aouyh Tkehnek Multi-sensor technology: Combination of non-contact optical measurements and tactile measurements for comprehensive data acquisition and maximum precision. CNC control: Enables the creation of fully automated programs for repeatable and time-saving inspections. Fusion 3D software: Supports CAD import/export, DXF overlays and the creation of detailed reports with statistical process control (SPC). Programmable LED illumination: Provides optimal illumination of the workpiece to improve edge detection and measurement accuracy. Zoom optics: 6.5:1 zoom optics, optionally expandable to 12:1, offers maximum flexibility for different measuring requirements. The Baty Venture Plus XT is the ideal solution for companies that require a flexible and precise inspection solution for large to very large workpieces. It offers the necessary precision and efficiency to meet even the most demanding production requirements

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Nwjdpfou Rc Hmex Ahnok

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Nwsdpev Sthgefx Ahnok Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location