Used Alberti V. Continuous Cycle Hot Press for sale (48,760)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Blodpjk S Dt Tofx Ad Aeg Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Bledpsfxyh Rjfx Ad Aeg Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: ready for operation (used), Year of construction: 2014, sheet width 3140 mm plate thickness 6.5 mm ST thickness at "Niro-steel" 4.0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable max. 800 mm Control M 15 S total power requirement 7.5 kW weight of the machine ca. 6350 kg dimensions of the machine ca. 4350 x 2250 x 1900 mm current new price approx. 60.000 euros special price on request Description : - robust folding machine - high precision for wide bending processes - increased rigidity in design - hydraulic drive - with rack and pinion for better control and accuracy - compared to normal hydraulic systems * Easy adjustment of material thickness * Adjustable hydraulic pressure * to adjust the thickness of the material Blodpfxsyuzcno Ad Aeg * This prevents damage to the surface of the materials - Smallest return bend 25 mm Equipment: - Program control "M 15 S" with LED display * for bending angle adjustment - Manual backgauge 0 - 800 mm - Manual lower beam adjustment - Light barrier front and rear - 1x freely movable triple foot switch - 2x forklift pockets for easy transportation - Operating instructions (PDF)

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Blsdpfoic Rl Dsx Ad Asg Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: used, mileage: 225,000 km, power: 240 kW (326.31 HP), first registration: 06/2013, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1178 * MB Econic 2633 Faun Variopress II * Zöller Delta 2 lifter * From first German municipal ownership * 240 kW / EURO 5 EEV * Maintenance / service book available * Reversing camera with monitor * Allison automatic transmission * USB socket at driver's station * Very good condition for its year! * The customer is obliged to independently verify the condition and equipment of the item/vehicle! * etc. * Vehicle may still be in use / mileage and condition subject to change Bjdpfjyv Ubzex Ad Aslg * All information subject to change, no liability for errors * Interim sale reserved * Please refer to our Terms and Conditions

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Bodpfxoyuuc Ie Ad Ajlg Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: used, Year of construction: 1998, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, oil tank capacity: 300 l, controller model: DNC 900 PS, working width: 4,050 mm, bending force (max.): 175 t, We are offering this used EHT VARIOPRESS 175-40 press brake, year of manufacture 1998. Machine type: VARIOPRESS 175-40 Serial number: 211030 Year of manufacture: 1998 Working length: 4050 mm Pressing force: 1750 kN Bljdjyw Rbyepfx Ad Asg Oil capacity: 300 l Frequency: 50 Hz Current type: 3~ Operating voltage: 400 V Control voltage: 24 V Rated current: 54 A Main fuse: 63 A Main motor power: 15 kW Wiring diagram no.: 11702 Control type: DNC 900 PS If you have any questions or require further information, please send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction Bledpfxjin Et Nj Ad Aeg low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 120 t, Hidrobrasil Glulam Press – Glulam Beam Press – 12,000 mm – 12 × 10 t Cylinders For sale is a hydraulic glulam press manufactured by Hidrobrasil, designed for the production of glulam beams up to 12,000 mm in length. This machine is engineered for industrial manufacturing of laminated timber beams and offers high flexibility in the pressing process thanks to cylinders that can be controlled individually or in groups. The system also enables production of curved components by using appropriate molding forms. ==== Technical Data & Information: Hydraulic Glulam Beam Press ==== General Information - Manufacturer: Hidrobrasil - Model: Glulam Press - Machine type: Glulam Beam Press - Design: Hydraulic beam press - Application: Glulam/laminated timber production ==== Working Range - Max. workpiece length: 12,000 mm - Max. width: 150 mm - Max. height: 600 mm (depending on wood type and construction) ==== Pressing System - Number of cylinders: 12 units - Pressing force per cylinder: 10 t - Individual or group control possible ==== Operating Speeds - Downward speed: 10 mm/sec - Upward speed: 25 mm/sec ==== Hydraulics - Components: Bosch Rexroth (except cylinders) - Hydraulic unit: external, located behind the press - Oil tank: 500 l Bsdpeg Tzbasfx Ad Aslg - Motor power: 15 kW ==== Control System - Control panel for individual or group cylinder operation - Adjustable pressure holding time ==== Special Features - Production of both straight and curved glulam beams possible - High flexibility through modular cylinder control ==== Wood lamination, glulam manufacturing, timber construction, laminating, industrial wood processing Hydraulic press, hydraulic press, gluing press, glulam beam press, lamination press, laminated timber line, wood press, industrial press Are you looking for a hydraulic press tailored to your specific requirements? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directive, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our key strength is special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. Hydraulic systems mainly utilize components from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Blsdpfog Iihwsx Ad Aog Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0362, pressing force: 250 t, pressure:250 t passage width:1800 mm stroke:600 mm total power requirement:22 kW weight of the machine ca.:24 t dimensions:ca. 3390 x 3400 x 3800 mm column diameter:160 mm return capacity:25 t max. working heidht:800 mm Table dimensions:1800 x 1600 mm :2350 x 1600 mm table height over floor:900 mm hydraulic table shift:25 mm/sec table load:5 t pre-running speed:10 mm/sec pressure speed:10 Return Speed:25 mm/sec speed rapid traverse:10 mm/sec :600 l Oil cooling (electric):1,5 kW (max) :46er / 10 my Bedpfofxyinex Ad Ajlg Monitor SIEMENS:10 Zoll

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t Bljdpfxofh Izmo Ad Aog travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 160 t, pressure:160 t stroke:600 mm total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm table load:5 t Bljdsfxyi Iepfx Ad Aeg pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec quantity of oil:220 l

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Bljdpofxyh Hsfx Ad Aog Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm Blsdpfofxygpjx Ad Ajg :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? :1200 ? :1200 ?

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Bedpfx Aedyynvsd Aelg Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: new, pressing force: 100 t, pressure:100 t passage width:700 mm stroke:450 mm weight of the machine ca.:6 t dimensions:ca. 3000 x 1210 x 3100 mm return capacity:10 t :22 kW Max Working height:850 mm :1 - 100 mm speed of return flow:1 - 100 mm/sec :1 - 10 mm/sec. pestle plate:1090 x 600 mm table plate:1090 x 600 mm positioning accuracy:0,1 mm table height over floor:800 mm :300 l Bsdpfx Adsfxyhqs Aslg Oil cooling (electric):1,5 kW (max) ejector:d=100 mm ejector stroke:210 mm pressure of ejector:100 t no. of ejector pins:1 Stück Monitor WEG:15 Zoll :2.000,-- ? :2.400,-- ? :3.000,-- ? :2.400,-- ? :5.800,-- ?

Condition: used, Year of construction: 1991, pressing force: 650 t, pressure:650 t Bljdefhmuvjpfx Ad Aeg passage width:920 mm stroke:1750 mm weight of the machine ca.:ca. 47 t Table area:2000 x 1500 mm ram surface:2000 x 1500 mm Daylight Opening:2100 mm Hydraulic:203 bar closing speed:500 mm/min pressing speed:0,5 - 10,4 mm/sec opening speed:250 mm/sec Solve speed:0,5 - 66,4 mm/sec Return Capacity:150 t total power requirement:75 kW Measurements (approx.):4,4 x 2,5 x 7,5 m

Condition: used, Year of construction: 2019, pressing force: 250 t, pressure:250 t passage width:2500 mm stroke:500 mm total power requirement:60 kW weight of the machine ca.:39 t dimensions:2720 x 3750 x 4350 mm return capacity:25 t max. working heidht:800 mm Table dimensions:3090 x 1500 mm :3090 x 1500 mm table height over floor:1000 mm pre-running speed:400 mm/sec pressure speed:bei 125 t, 50 mm/sec Return Speed:400 mm/sec speed rapid traverse:400 mm/sec :1500 l Oil cooling (electric):3 kW (max) Vibration damper plates:je 450x450x85 mm pressure:250 t bei 220 bar t/bar pump capacity:176 Lt./min Bsdjd Nq Idopfx Ad Aelg :46er / 10 my Hydraulics from Bosch Rexroth or other German manufacturers :Parker, Hydac :inklusive Light Barriers from Schmersal/Pilz:Pilz Monitor:Omron 12 Zoll

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Blodpfx Asx Ap Itod Asg Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous Bsdpjtwv S Nefx Ad Aelg - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0329, pressing force: 350 t, pressure:350 t passage width:3000 mm stroke:900 mm total power requirement:75 kW weight of the machine ca.:60 t dimensions:2660 x 5400 x 5700 mm return capacity:35 t Table dimensions:3610 x 1600 mm :3610 x 1600 mm table height over floor:900 mm pre-running speed:230 mm/sec return speed:170 mm/sec Bsdjfxygzspfx Ad Aelg :2000 l max. working heidht:1700 mm pressure speed:21 mm/sec speed rapid traverse:200 mm/sec Oil cooling (electric):3 kW (max) :S7 1500 Monitor:WEG 12 Zoll

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm Blodpfxofxyh Ao Ad Aog total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: used, Year of construction: 2001, machine/vehicle number: H01-3129, pressing force: 200 t, pressure:200 t passage width:1300x1300 mm stroke:1000 mm total power requirement:37 / 5,5 kW weight of the machine ca.:29500 kg dimensions of the machine ca.:2600x3000x5200 mm speeds::450 mm / freier Fall speeds::20 mm/sek tracking travel:130 / 60 ms oil pressure :283 bar Blsdjfhcc Nepfx Ad Aeg capacity of oil tank:2200 L

Condition: used, Year of construction: 2017, pressing force: 500 t, pressure:500 t passage width:1300x800 mm Bedpfx Aod E Irmsd Aslg stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l