Used Angeli Industrial Machine Angeli Are 1.0 (2019) for sale (87,623)

Condition: used, Technical details: tube diameter: siehe o mm wall strength: siehe o mm voltage: 230 V / 1Phase V total power requirement: 0,55 kW machine weight approx.: 56 kg dimensions L x W x H: 0,45 x 0,37 x 0,35 m HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stainless steel (1.4571/1.4541/316Ti or similar) and copper pressure-controlled There is a flaring tool for the size Ø 14mm on the machine. The operating pressure is variably adjustable. Pgedpfju Icu Ssx Amxot *

Condition: used, Year of construction: 2006, Folding machine with rotating upper beam (straight tool on one side, segmented tools on the other) with the newly installed Prolink control system. Specification: Manufacturer: Göteneds Pgsdperx N U Hjfx Amxjt Model: FUTURA 25 Year of manufacture: 2006 Working length: 2 600 mm Bending thickness: 2.5 mm Rear support: automatic 2 000 mm Control system: newly installed ProLink Other features: steel wheels on the rear support, adjustable folding speed, curvature compensation system, quick tool lock, tool height 150 mm. Weight: 4 290 kg. Delivery: two months after order If you have any further questions, we will be happy to answer them.

Condition: new, plate thickness 2,5 mm roll diameter 98 mm throat 160 mm total power requirement 1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 550x1400x1500 m Delivered with: • hydraulic version • 4 set of wheels • Foot control Pedpfx Amed Iimzjxogt • Brake motor • Emergency stop

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm Pgedpfx Amjhyuglsxet - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Pedoxvdmdopfx Amxsgt Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm connected load 5,5KW Pgjdpfoh Hgdrsx Amxot max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons

Condition: like new (used), functionality: fully functional, Ferwood code: RS0003524 - Manufacturer code: 2420A0716 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer refurbishment service, please contact us. 1.5KG 36X26X21 Pedpeymfgbsfx Amxjgt

Condition: new, Product description: Pgodpfegha A Sox Amxet Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Condition: used, Horizontal machining center with pallet changer, STEINEL type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M Manufacturer's No. 77, Year of construction 1990 Travel range X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Pallet rotation B-axis Spindle speed max. 7100 rpm, stepless Tool holder ISO 40 Power connection 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and dual-arm gripper - Pallet changer with 4 pallets - Horizontal pallet position for machining, axis movement = X-axis Psdpfx Asdzqmrsmxegt - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with lateral movement as Y-axis - Coolant spray nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Space requirement L x W x H 9000 x 3100 x 3200 mm Weight 13.5 tons Transport dimensions on truck: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm Loading into a 40" OT HC container is possible. Good condition.

Condition: new, For sale: High-quality industrial heater from HTT (the energy performer). Condition: New, unused; has been in storage (warehouse stock, slight storage marks possible). 🔧 Technical specifications: Manufacturer: HTT Pgsdpfoyx I Sfsx Amxet Part number: KA19-03910/1/1 Serial number: 6170G953 Power: 40 kW Voltage: 400-440V, 3 Phase (V/3Ph) Protection class: IP66 Design: Flanged Certification: CE 📏 Construction: Multi-element heater (multiple heating tubes) Robust industrial design Aluminum connection box Flanged connection 💡 Applications: Heating of water and process liquids Industrial tanks Production installations Heating and process systems 📦 Included: Exactly what is shown in the photos

Condition: good (used), Format: 500x500 mm Pgjdpfx Aogt Un Ssmxjt

Condition: good (used), ZNHZ-508A Envelope Making Machine Paper weight 70 – 150 g/m² Production rate 3000 – 9000 pcs/h Maximum folded envelope size Western Style 324 x 229 mm Min. folded envelope size 100 x 100 mm Power 8 kW Weight 3000 kg Psdpez A H Sgsfx Amxegt Dimensions 6600 x 1200 x 1300 mm Year of manufacture 2014. Key advantages of the machine: – A bottom-mounted vacuum feeder allows for continuous material loading without stopping the machine. – A proprietary adjustable creasing and perforation system on the machine cylinder allows for loading material in the form of only the cut-out envelope outline. – Simple and easy adjustments simplify and shorten makeready time. – Standard bookbinding glue is applied from an inkwell through rotating rings with precise adjustment of its position and intensity. – Glue for the closure is also applied from an inkwell with precise adjustment of the intensity. – A vacuum suction system located on the cylinders allows for perfect folding of envelopes even at very high speeds. – The machine has two folding systems enabling double-closing of envelopes. – The electronic counting system is equipped with an electromagnetic separating device, allowing for separating envelopes, e.g., 50 pieces per envelope.

Condition: good (used), Format: 500x500 mm Psdegt Uplopfx Amxjgt

Condition: good (used), Format 500 x 500 mm. Pgodpfsgt Unksx Amxjt

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Pgjdpfx Aezv S Rwomxet Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Pjdpfezzx H Ajx Amxegt Documentation ShopMill function Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Pgjdpfow Tlz Esx Amxjt Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,334 h, load capacity: 2,000 kg, lifting height: 750 mm, fuel type: electric, construction height: 1,300 mm, FRIEDMANN FORKLIFTS – REMADE FOR ACTION WE ARE HERE FOR YOU. WITH COMMITMENT, PASSION, AND EXPERTISE. Used industrial trucks from selected premium manufacturers – fully serviced, tested, and professionally refurbished by us according to FEM-4.004 (UVV) standards. Over 350 vehicles in stock Custom modifications of any type possible to meet customer requirements. International transport with suitable vehicles and customs clearance available upon request. See for yourself and visit us at our facility. Friedmann Forklifts – Our Quality Promise Full functionality according to FEM-4.004 Psdpfey Rm N Tsx Amxsgt Serviced & tested (C5-test) battery for electric units (minimum 70% capacity)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Pgjdpozux Iyjfx Amxet Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: good (used), Year of construction: 2008, XYZ Compact Turn 52 CNC lathe with barfeeder Year: 2008 Technical details: Bar Capacity 52mm Chuck Size 150mm (6") Control Siemens 810D Shopmill Distance Between Centres 280mm Maximum Cutting Diameter 220mm Maximum Cutting Length 280mm Rapid Feedrates 20m/minute Spindle Motor Power 20Hp Spindle Nose A2-5 Spindle Speed 5000rpm Swing diameter 400mm Swing Over Carriage 400mm Tailstock Quill Diameter 60mm Tailstock Quill Stroke 90mm Tailstock Taper MT4 Tool Size 20 x 20mm Tooling Configuration VDI 30 Turret Positions 12 X axis Travel 185mm Z axis Travel 325mm Pgsdozg Intopfx Amxot Machine Dimensions 2531 x 1778 x 1720mm Machine Weight 2590kg Accessories/options: - LNS servo barloader - Foot pedal for chuck operations - Parts catcher - Renishaw tool setter - Tailstock - VDI 30 tool holders - Swarf conveyor - Documentations Under power in our warehouse, possible to test it anytime!

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 4 mm, - Capacity: 4 mm - Adjustment of the hydraulic roller - Foot switch - Braking motor Psdegg Nq Hspfx Amxsgt - Includes 4 sets of rollers - Emergency stop - 400V

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm Pjdozuxn Tspfx Amxsgt 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Pgjdpfezb Ipzex Amxst Coolant pump and tank

Condition: used, Year of construction: 2013, XYZ Proturn SLX1630 CNC/Manual Lathe. S/No. 16-P-10008-095 (2013) with Proto Trak SLX Control, 200mm Diameter 3 Jaw Chuck, Swing Over Bed 440mm Diameter, Distance between Centres 700mm, 3 Position QCTP, Spindle Speeds to 2500rpm Pedpfx Amszy N I Uoxsgt Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: new, For sale: high-quality industrial heating element (heizstab) by HTT energy GmbH. Condition: New, unused, stored in warehouse (may have minimal storage marks). 🔧 Technical specifications: Manufacturer: HTT energy GmbH Article number: 20178 Order number: 7122-001 Pgsdeyx I Rzepfx Amxot Power: 50 kW Voltage: 400V (3-phase), 50-60 Hz Current: 72.2 A Protection rating: IP65 Max pressure: 10 bar Temperature range: 5 - 350°C Year of production: 2021 📏 Construction: flange heater multi-tube design junction box with terminals 💡 Application: heating water, oil, and other liquids industrial tanks technology installations heating systems 📦 Included: Exactly what is shown in the photos