Used Arcall Cheese Grating Line Dairy Plant Equipment for sale (48,786)

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line Crodpjz D S Sbofx Adrsh - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, functionality: fully functional, mileage: 91,804 km, power: 170 kW (231.14 HP), first registration: 01/2003, overall weight: 15,000 kg, color: orange, axle configuration: 4x2, empty load weight: 5,880 kg, fuel: diesel, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, Year of construction: 2003, Equipment: ABS, air conditioning, differential lock, self-propelled work machine, winter service vehicle: + Mercedes-Benz Crsdpfx Aoz Ei Nmodreh + Atego 1523 (975.26) + First registration: January 29, 2003 + 91,804 km + 8-speed manual transmission + Engine OM906, 231 hp; 6374 cc + Differential lock + Tachograph + Additional headlights + Air conditioning + Amber light + Air suspension, rear axle + Municipal hydraulic system + Snowplow mounting plate + Right-hand drive + Küpper-Weisser STA95 3 m³ + brine salt spreader + 730 cm x 240 cm x 300 cm (l x w x h) + Unladen weight: 5,880 kg; permissible total weight: 15,000 kg + Municipal vehicle, first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Credpfx Aju Ttf Nsdroh Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: used, The set on offer is a complete MAREL SmartLine Grader weighing and sorting system in Dual Lane configuration, featuring two independent belts, each served by its own row of sorting output bins on the side of the machine, allowing for higher throughput than a single-lane configuration. The set additionally includes 2 infeed conveyors, model INF-PROL 031-02, 2 dynamic weighing stations (Dynamic Weighing Unit, model DWU, year 2014, range 250 g–6 kg), and 2 sorting stations (target batcher). The system is designed mainly for fish products but works well with most other food products too. How does the MAREL SmartLine Grader Dual Lane system work? Product is fed onto the line via two infeed conveyors, model INF-PROL 031-02, which deliver raw material to the weighing stations in a steady, controlled manner. Each of the two dynamic weighing stations (DWU) measures the weight of individual product pieces within a range of 250 g to 6 kg, passing the data to the control system. Based on the measured weight and programmed sorting criteria, the two sorting stations (target batcher) direct the product to the appropriate output bins, enabling precise batching to a target weight with minimal giveaway. The open, hygienic IP69K-rated construction allows for fast disassembly and pressure washdown, while an intuitive touchscreen panel provides ongoing monitoring and control of the sorting process. Key advantages of the MAREL SmartLine Grader Dual Lane system The Dual Lane configuration, with two independent belts and separate rows of sorting output bins, handles significantly higher production volumes than single-lane systems while maintaining high sorting precision. The doubled set of infeed conveyors, weighing stations, and sorting stations allows for two independent lines to run in parallel or for doubled throughput on a single process. The high weighing accuracy of the DWU stations minimizes product giveaway, translating directly into raw material savings across overall production. The hygienic, open-frame IP69K-rated construction, together with fast disassembly and reassembly, makes it easier to maintain the high cleanliness standards required in the food industry, while integration with MAREL software provides real-time production insight and batch traceability. Technical specifications of the MAREL SmartLine Grader Dual Lane system MAREL SmartLine Grader Dual Lane Manufacturer: MAREL (JBT Marel) Model: SmartLine Grader – Dual Lane configuration Number of lanes: 2 independent belts, each with its own row of sorting output bins Protection rating: IP69K Control panel: touchscreen, with real-time monitoring and reporting software Application: mainly fish products, also works well with most other food products Infeed conveyors (2x INFEED Conveyor) Model: INF-PROL 031-02 Quantity included: 2 units Dynamic weighing stations (2x DWU) Csdpfx Adez Haq Dsrorh Model: DWU (Dynamic Weighing Unit) Year of manufacture: 2014 Weighing range: 250 g – 6 kg Quantity included: 2 units Sorting stations (2x target batcher) Quantity included: 2 units Application of the MAREL SmartLine Grader Dual Lane system

Condition: used, Year of construction: 1989, power: 176 kW (239.29 HP), fuel type: diesel, Equipment: gripper hydraulics, hydraulics, For sale KRAZ 255 B1A, 1989, 176 kW, diesel. ADDITIONAL EQUIPMENT: HYDRAULIC LIFT FORESTER 2012TH. EU registration, number, registration certificate. Cjdpfxjwrpw Ae Adrorh

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, High-quality meltblown production line for nonwovens On December 17, 2025, a complete machine inspection was carried out by the manufacturer's customer service department. Report available. If interested, we can offer assistance with commissioning at the customer's site. The video shows the line shortly before dismantling. Operating hours: 200 hours (only for commissioning) Price of a new machine: EUR 7,500,000 Cedpfox Hx Rnox Adrerh • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of construction: 2021 • Last commissioning: 2022 Technical data • Working width: 1600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating power of the rotating beam: 65–172 kW • Winding station: Contact winder with pre-set bobbin change • Maximum winding diameter: 1250 mm • Web width: 1700 mm • Winding tension: 10–100 N/m Additional equipment and accessories • 3-component dosing system • 80 mm seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Slitting knife • Central control panel with touchscreen and data entry

Condition: ready for operation (used), Year of construction: 2010, Rademaker industrial powdered sugar duster with stainless steel conveyor, suitable for the automatic and even application of powdered/icing sugar onto bakery products. The machine is manufactured entirely in stainless steel and is equipped with an integrated wire-mesh conveyor and an independently driven spreading/brush system. The conveyor belt and spreading unit can be controlled separately. The machine can be used as a stand-alone unit or integrated into an existing bakery production line. Serial number: 7498-703 Year of build 2010 Stainless steel construction Cjdjz Ha N Hjpfx Adrerh Integrated stainless steel wire-mesh conveyor Driven spreading/brush system Separate controls for conveyor and spreading brush Frequency-controlled drive Electrical control cabinets Mobile stainless steel frame Voltage: 230 V Connection: 1 Phase + N + PE Frequency: 50 Hz Current: 3 A Weight: 175 kg CE marked

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 28 mm, total length: 88 mm, total height: 58 mm, type of input current: DC, outer diameter of label roll: 275 mm, inside diameter of label roll: 76 mm, label length: 450 mm, warranty duration: 24 months, overall weight: 25 kg, input voltage: 220 V, New Semi-Automatic Labelling Machine – Fast & Precise For sale: new labelling machine suitable for labelling round bottles, cans, containers, and jars. The machine operates on 220V and is constructed entirely from stainless steel and aluminium, ensuring a robust, durable, and high-quality finish. With a weight of approximately 25 kg, the machine is stable and easy to place on a work table. Depending on the operator and the type of bottle or jar, this semi-automatic labeller can process 20 to 40 products per minute, making it highly suitable for both small and larger production runs. Specifications - Suitable for round bottles/jars with a diameter of 15 to 150 mm - Minimum label size: 26 mm wide × 25 mm long - Maximum label size: 150 mm wide × 450 mm long - Maximum external diameter of label roll: 275 mm - Label roll core diameter: 76 mm - Power supply: 220V Application This labelling machine is ideal for both small batches and larger production runs, offering a perfect solution for entrepreneurs and producers seeking speed, consistency, and quality in their labelling process. Codporivxksfx Adrorh Contact Do you have questions or would you like more information? We respond to all messages within 24 hours. We are happy to assist you on working days from 09:00 to 17:00.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The Mécan'Outil TGV/S automated production line is designed for the assembly of roller shutter casings made from PVC and aluminum profiles. The machine was delivered to a production facility in 2021. The unit is in very good technical and visual condition, making it an excellent investment for companies involved in the production of roller shutter systems. Price: 85,000 EUR (negotiable) Detailed technical specifications are available in the attachments. Please contact us for further information and to arrange a viewing of the machine. This is a fully equipped production line that can quickly begin operation in a new facility. Highly recommended. Crodpfxjz E Nzcs Adrjh

Condition: good (used), Year of construction: 2008, functionality: fully functional, KALTENBACH KDE 603 – CNC Drilling Line- Year 2008 3 spindles. Manual tool change. 12.5 Metres infeed. 12.5 Metres outfeed. Crodpfx Ajz Hd Tpjdreh Infeed and Outfeed Crosstransfers. 600mm Capacity Drilling diameter 6 – 31.75 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, FOR SALE: COMPLETE UV PAINTING LINE – SORBINI / CEFLA / BARGSTEDT Individual machines can also be purchased! For sale: a complete, industrial UV painting line designed for finishing flat surfaces, furniture components, MDF, HDF boards, panels, and other wood-based materials. The line is equipped with automatic loading and unloading systems, wide-belt sanders, dust extraction systems, multiple coating stations, UV drying tunnels, and a UV printer. Main equipment of the line: • Automatic loading and unloading systems BARGSTEDT • Pallet storage systems BARGSTEDT • Wide-belt sander BUTFERING OPTIMAT SCR 413/RREE with HEESEMANN EA2 dust extraction • Wide-belt sander BUTFERING OPTIMAT SCR 213/EE • Brush sanding machine SORBINI SMART SAND 1 • Numerous CEFLA conveyors • Roller coating machines: SORBINI KOMPACT SYSTEM Crjdpfxozg Epuo Adreh SORBINI SMARTCOATER SP1 (several units) SORBINI SMARTCOATER MF (several units) • CEFLA drying tunnels: hot air tunnels IR tunnels UV tunnels (UV 2000 M2, UV 2000 M3) • SORBINI T/20-3-STP UV printing line (3-head) The line enables the execution of a complete technological process: sanding, dust extraction, application of primers and paints, UV curing, UV printing, and final surface finishing. This is an ideal solution for manufacturers of furniture, furniture fronts, decorative panels, and carpentry elements. Machines from renowned manufacturers: SORBINI, CEFLA, BARGSTEDT, BUTFERING, HEESEMANN. Sale of the complete line. Viewing is possible by prior appointment. Detailed technical specifications available upon request.

Condition: used, functionality: fully functional, Greif-Velox Packaging Solution Bag Filling Line 25kg bags capacity 250-350 bags/h throughput comprising Cjdpfx Aoz Hdg Nsdrjrh Greif-Velox velomag feeding machine Greif-Velox velofill automatic bag filler/sealer machine serves to store, cingulate, and feed pre-made bags 400mm x 600mm and 500mm to 900mm in length Greif-Velox belt conveyors Control panels and additional infrastructure

Year of construction: 2021, condition: used, functionality: fully functional, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment Crjdpfezc N Axjx Adrsh End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: excellent (used), functionality: fully functional, mileage: 1,915 km, first registration: 12/2012, overall weight: 6,045 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 2,630 kg, empty load weight: 3,415 kg, tire size: 225/75 R17.5, fuel: diesel, wheelbase: 2,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: hydrostat, suspension: parabolic leaf (spring), loading space length: 2,600 mm, Year of construction: 2010, operating hours: 1,915 h, Equipment: ABS, additional headlights, air conditioning, crane, differential lock, fog lights, immobilizer system, parking heater, second-hand vehicle warranty, soot filter, traction control, trailer coupling, Welcome to MGC.pl in Łaziska Górne! Since 1995, we have been involved in the sale of cars, trucks, and machinery. Over the years, we have sold over 6,000 vehicles and machines, gaining experience and the trust of customers from Poland and abroad. We present a multifunctional AUSA M350Hx4 municipal vehicle with all-wheel drive, a tipping body, a Copma loading crane, and a winter road maintenance kit consisting of a Villeton snow plow and a SnowEx V-Maxx 7550 spreader. This vehicle was imported from France and has a low original mileage of only 1905 operating hours. It was manufactured in 2010, put into use in 2013, and first registered on 03/12/2012. This well-maintained unit is free from chassis corrosion and has tires in good condition. Its compact design, with a width of only 170 cm and 4x4 drive, makes it ideal for use on narrow roads, parking lots, housing estates, and industrial sites. EQUIPMENT AND BODY: • All-wheel drive – driven front and rear axles. • Tipping body with opening side gates. • HDS loading crane by Copma, mounted behind the cabin. • SnowEx V-Maxx 7550 spreader with a separate controller in the cabin. • Villeton LT 14 × 22 snow plow with adjustable settings for working straight ahead, to the left, and to the right. • Hydraulic lifting and adjustment of the snow plow. • Control panel for hydraulics and equipment, accessible from the driver's seat. • Floating function of the snow plow – indicated by "FLOAT" on the control panel. • Front hydraulic connections for equipment. • Warning lights on the roof of the cabin. • Warning signs on the snow plow and poles indicating its extreme position. CABIN AND INTERIOR CONDITION: • Enclosed, two-person cabin with a large glass area. • Two separate seats with fabric upholstery and headrests. • Seat belts. • Seat adjustment. • Sliding side windows. • Exterior mirrors. • Windshield wiper. • Vents on the dashboard. • Instrument panel with speedometer, tachometer, and operating parameter indicators. • Central console with switches for controlling equipment. • SnowEx controller with separate adjustment for material spreading and spreader operation. • Rubber floor mat for easy cleaning. WHEELS AND TIRES: • Tire size according to the certificate of conformity: 225/75 R17.5. • Tires marked M+S. • Steel rims. • The photos show a clear tire tread. • The rim is in good visual condition, with no obvious corrosion. • The wheels and tires look good visually; the actual tread depth should be checked during inspection. TECHNICAL DATA: • Make and model: AUSA M350Hx4. • Mileage: 1905 operating hours. • Engine: Volkswagen, diesel. Credpfez Hv H Uex Adreh • Engine code according to the document: CJDA. • Engine capacity: 1968 cm³. • Power: 75 kW / approximately 102 hp at 3000 rpm. • Four cylinders in a row. • Emission standard: Euro 5. • Gearbox according to the certificate of conformity: manual. • Maximum speed according to the document: 61 km/h. • Two axles, both driven. • Front axle is steerable. • Two seats in the cabin. DIMENSIONS AND WEIGHTS: • Vehicle length: 4470 mm. • Width: 1700 mm. • Wheelbase: 2200 mm. • Length of the loading area: 2600 mm. • Rear overhang: 980 mm. • Vehicle weight in ready-to-drive condition: 3415 kg. • Technically permissible total weight: 6045 kg. • Permissible front axle load: 2650 kg. • Permissible rear axle load: 3750 kg.

Condition: used, Year of construction: 2019, Overview Complete craft-beer bottling line for 0.33 L glass bottles, currently in operation. The heart of the line is an ABE GLASSPAK 66 automatic rotary isobaric monobloc that rinses, fills, crowns and post-rinses up to 4,000 bottles/h. A layer depalletizer feeds the filler; a linear labeller with lot coder, an accumulation table and a case sealer complete the end of line. Technical data - Product: beer, glass bottles - Capacity: up to 4,000 bottles/h at 0.33 L - Filling: isobaric (counter-pressure), 18 filling valves Credpfx Adez Hz S Aerjh - Closure: 26 mm crown caps - Filler electrical supply: 380-415 V, 3-phase, 50 Hz - Year of manufacture (filler): 2019 Scope of Delivery - Bottle depalletizer | Cordero Maquinaria | layer depalletizer with overhead sweep frame, electric hoist and bottle infeed table, 400 V, 50 Hz - Isobaric filling monobloc | ABE | GLASSPAK 66 | inverting pre-rinser, vacuum and CO2 purge, 18 counter-pressure filling valves, 7-head crown capper, post-rinse and drying, touch panel, SEW 2.2 kW main drive, 4,000 bottles/h | 2019 - Pump cart | ABE | diaphragm pump for product feed | 2019 - Linear labeller | Basic Total | self-adhesive labels, bottle diameters 15-100 mm - Lot coder | Hitachi | UX-B160W | continuous ink-jet printer - Accumulation table | rotary, with infeed and accumulation controls - Case sealer | SOCO System | T-10 | with extendable roller conveyor Documentation Operator's manuals V1.2 and V1.3 and parts pictorial V2.2 for the GLASSPAK 66, labeller manual, original invoice. Condition Currently in operation. Availability Available now. Location: Spain.

Condition: used, Year of construction: 2016, functionality: fully functional, Conveyor line / roller conveyor system / material handling system, material handling equipment, approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Conveyor line Condition: Used Year of manufacture: 2016 The system consists of: 1 x Inclined belt conveyor, approx. 3.2 meters long 2 x Pneumatic lifts 3 x 90° bends 2 x Folding elements / passage elements 1 x Control cabinet 25 pcs adjustable feet and the remaining conveyor belt / roller conveyor, approx. 34 meters Total length: approx. 50,000 mm Total width: 750 mm Conveyor width: approx. 680 mm Roller diameter: 50 mm Internal article number: 2025120101 Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packed Collection address: Industriestraße 5 (47918 Tönisvorst) The material handling equipment was in operation until disassembly. Thanks to the excellent workmanship of the material handling equipment, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics Csdox Ala Espfx Adrorh For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the trades or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers.

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 30,000 kg, Year of construction: 2007, operating hours: 1,958 h, machine/vehicle number: 521, Engine: Deutz Hopper volume: approx. 8.1 m³ Double-deck screening box (L 4,500 x W 1,800 mm) Feed rate: up to 600 t/h Apron feeder (L 3,560 x W 1,300 mm) Control: LCD display & remote control Transport dimensions: 13,300 x 2,700 x 3,200 mm (L x W x H) HOURS - OPERATING HOUR METER Credpfsz H R Dhox Adroh

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Here is an offer for a highly precise laser cutting machine with 3000 watts of laser power. Type: LG-1313/3kW HaiCut Premium Line - Maximum configuration - Innovative 3-gas switching system (Pressure and gas type can be controlled in the software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with refractory material - Machine bed and axes measured and adjusted with Renishaw interferometer Our goal is to offer the best, most reliable, and most affordable laser machines currently available on the market. Our machines are ideal for workshops and repair shops. A perfectly designed cutting parameter library is included in the scope of delivery, as well as first-class on-site service. Please also note our attractive leasing/hire-purchase offers. New machine. We would be happy to demonstrate the machine to you at our facility. Travel range: approx. 1300 x 1300 mm Table size: approx. 2500 x 1300 mm (i.e. there is space in the machine for a medium-sized sheet) Extendable cutting table For highly precise cutting of metal Everything is fully installed and adjusted Cutting software in German Incl. control panel module Very easy to operate Switch on and start Laser source from Max Photonics (G5/German version) with 3000 watts of power Extensive electronic and mechanical collision protection measures for the cutting head Large laser protection window on the front door Automatic front door Safety light curtain for maximum operator protection Cutting of stainless steel up to 12 mm Cjdpfxei Igaue Adrerh Cutting of steel up to 22 mm Cutting of aluminum up to 12 mm Cutting of brass up to 5 mm Heavy-duty industrial quality Complete system / ready for immediate use LED work area lighting 200mm pipe connection for fume extraction Incl. extraction fan Leasing or hire-purchase is possible via our financing partner. Different power or table size needed? - No problem, we have several machines in stock or can deliver them within a short time. The sale is exclusively to commercial enterprises. Delivery/consultation/sale only in Germany/Austria/Switzerland. Machine dimensions approx.: Width: 3.5 m, Height: 2.1 m, Depth: 3.5 m Weight: approx. 3.5 tons

Condition: used, Second-hand Weinig UC-Matic window production line, comprising: - Material feed station - Unirex No. 1 - Unirex No. 2 Crsdpfx Adjz Dtwxereh - Turner - Unitec - Univar 12 - Complete mechanisation Including Oertli Vienna IV 72 & 92 window tool set for timber and timber-aluminium Technical data: - On request.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, The system was installed in 2008 but was used for a maximum of 2 years. It is located in the sorting hall and is in very good condition. Complete technical and operational documentation is available. CE certified. Currently (October 2, 2026), it is still connected to the power supply. Commissioning is possible. We will send you a presentation video upon request – please provide your email address. Waste sorting system: Loading conveyor belt 3000 x 901 mm, 1.5 kW, Inclined conveyor belt 7022 x 901 mm, 1.5 kW, Crsdjz Hbnwopfx Adroh Sorting conveyor belt 10522 x 901 mm, 2.2 kW, Unloading conveyor belt 7960 x 901 mm, 2.2 kW.

Condition: good (used), Year of construction: 2016, Technografica printing plate baking line, 1550 mm, year of manufacture 2016, plate developing machine, manufacturer Techno-Grafica, type TPP9001M, Crjdpfjzr Haxsx Adrjh year of manufacture 2002, 2 transfer tables, manufacturer Techno-Grafica, model CTA1550, year of manufacture 2002, baking oven, manufacturer Techno-Grafica, model EBO1550, year of manufacture 2002, degumming unit, manufacturer Techno-Grafica, model SPG1550, year of manufacture 2006, plate stacker, manufacturer Techno-Grafica, model PSTHS1550.

Condition: used, Year of construction: 2017, Overview Complete automatic canning line for beer by American Beer Equipment (ABE), built around the LINCAN 35 inline can filler and seamer. The line runs from the can depalletizer through the twister rinser, atmospheric filling and lid seaming to the air knife dryer. It is fully operational, with maintenance up to date and the latest software installed. Technical data Credjz Hziujpfx Adrjh - Year of manufacture: 2017 (LINCAN 35) - Capacity: rated 35 cans/min on 0.33 L cans; about 1,500 cans/h in production - Can formats: 0.33 L and 0.44 L in use; compatible with 0.355, 0.375, 0.5 and 0.568 L cans - Filling: atmospheric, for beer at about 3 °C, CO2 purge of each can before filling - Utilities: compressed air at 100 psi (approx. 7 bar), CO2 at 60 psi (approx. 4 bar) - Cleaning: CIP function started from the HMI - Control: touchscreen HMI with daily, weekly, monthly and lifetime can counters - Construction: stainless steel Scope of Delivery - Can depalletizer | Norland | YELLOW JACKET | for aluminium cans up to 24 oz, pallets 56 x 44 in with tier sheets, approx. 340 kg, footprint approx. 2.7 x 2.7 m with conveyor, height approx. 3.5 m - Twister rinser | inclined can twister with rinsing - Atmospheric can filler | LINCAN 35 | 7 inline filling nozzles with level probes, CO2 purge - Can seamer | LINCAN 35 | seaming unit upgraded, retaining bar added on the lid feed - Drying unit | air knife on the discharge conveyor - Documentation | operator manuals, printed and PDF Condition Fully operational and in very good condition, inspected in production. Maintenance up to date, software updated, seaming and lid feed improved. Availability Immediately. Location: Spain.

Year of construction: 2026, condition: new, ‼️NEW FEATURE – NOW WITH SIEMENS TOUCH SCREEN‼️ For improved operation and control! Leasing is also available! Crjdpfjp E Efcex Adrjh Always with linear monthly payments and no increased final installment! Term 36 months. Rate factor 3.0694% Term 48 months. Rate factor 2.3697% Term 60 months. Rate factor 1.9456% IMPORTANT‼️ Currently, there are machines from China being offered on various platforms. Most CE certificates are counterfeit, and there is no EU conformity. The electrical systems are also usually not compliant with German regulations. Several clients have contacted us, asking how it’s possible to obtain copper from these machines, as they only get shredded cable mixtures. Based on our own tests two years ago, we can confirm that these machines do not produce clean copper. Such machines are not permitted for use in Germany! German quality, CE certified with EU conformity, and available for live demonstration. We recommend buying locally here in Germany: German warranties, German laws, fixed prices, and German-speaking support in case of problems – all only with machines purchased from us. You are welcome to arrange a site visit to see our quality in person. Live demonstrations available! For all recycling needs, we have shredders and other recycling machinery in stock in Heilbronn! Here is our new, unique machine – a world exclusive, only available from us in Heilbronn. Water-cooled system. Very efficient, clean copper granulate: 99.7% purity. We are a German company operating under German law. Excellent quality with warranty and service. Our German-speaking skilled workers, all certified, can assist you at any time. We have our own trucks, service vans, and offer prompt support and advice. See for yourself on site – don’t just decide based on pictures or videos. We granulate ourselves and can demonstrate this live. S300 with water cooling and fan – developed and assembled in Germany by us. With our equipment, you can also separate radiator copper: Input: ➡️ Copper-aluminum radiators Output: ➡️ Separated copper and aluminum. Any iron parts and screws are separated via magnetic belt as their own fraction (pre-shredder required). Since we use our own machines for copper recycling, our systems are continuously modernized, optimized for long service life, and constantly improved. Maintenance, spare parts, modifications, and upgrades are provided by our trained staff! From stranded wire, extension cables, automotive cables, telephone cables, NYM cables – recycle it all with our machines! Granulation Plant S300 ➡️ For cables from 0.1–40mm ➡️ Up to approx. 250 kg/h input – meaning, with 50% copper content in the cable, you can recover 5kg of 99.7% pure copper granulate from 10kg of input, which can be sold at premium prices. ➡️ Total connected load: 24 kW ➡️ Including separation tables ➡️ 380-volt connection ➡️ UVV compliant, implemented by a German company ➡️ Conveyor belts included ➡️ Magnetic belt included (for steel separation) ➡️ Transport can be organized From €24,999.00 net +19% VAT €4,748.81 Gross €29,748.81 Subject to errors and prior sale.

Year of construction: 2026, condition: new, We also offer leasing and financing options. Please feel free to contact us! ‼️ATTENTION‼️ There are currently machines being offered on various platforms from China. Most CE markings are counterfeit. These machines are not EU-compliant. Their electrical configuration is also not approved for use in Germany. Several customers contacted us asking how to extract copper from such a machine, as all they got was shredded cable mixture. We tested these machines ourselves two years ago, and the customers are correct—these machines do not yield pure copper. These machines are not permitted for operation in Germany! Buy from us and make use of our expertise—see the machines for yourself at our Heilbronn facility. We provide long-term support and always help you to separate top-quality copper. Your Josan & Söhne Team! German quality, CE certified, EU-compliant, and available for live demonstration—not just edited or cut videos. We strongly recommend buying locally here in Germany. German guarantees, local laws, fixed prices, and German-language support in case of future issues. You get all this only with machines purchased from us. You're welcome to inspect our quality in person by appointment. Remember, videos can be edited. We offer live demonstrations‼️ We stock shredders and other recycling machinery for all recycling needs at our Heilbronn location! From copper recycling to plastics recycling—you can purchase all the necessary machines from us. Just ask! ‼️INSPECTION AT OUR FACILITY POSSIBLE‼️ Our compact model works just as perfectly as our larger machines, only smaller and more affordable. Top-grade copper granulate. Can be used in any garage. Approx. 20-30 kg input per hour. From stranded cables, extension cords, automotive cables, telephone cables, NYM cables—our machines can recycle it all! Josan Cable Granulator E30 We are happy to demonstrate the machine live in Heilbronn! Appointments only! We are based in Heilbronn as a German company, subject to German laws, with warranty and service! We also speak English! ‼️For further questions, please get in touch! We can only respond if you contact us with your name, address, email, and phone number. Any other inquiries may be filtered as spam. We will get back to you and provide preliminary advice! Here is our entry-level model: ➡️With 380 V Cjdep E Efyopfx Adrsrh ➡️For cable diameters approx. 0.1–30 mm ➡️Power approx. 4.2 kW ➡️Input approx. 20–30 kg/h ➡️Weight approx. 310 kg ➡️Dimensions approx. 88×74×173 cm ➡️With UVV (accident prevention regulation) executed by our German company With this machine, you can process cables into copper granulate. We also offer larger systems and accessories such as hydraulic cable cutters, electric motor breakers, triple-separators, etc. Complete solutions for cable recycling. When you buy from us, you also buy our service! This is extremely important, especially with these machines! Please note: our service applies only to machines and accessories purchased from us. With our know-how and our machinery, you will reliably produce copper granulate—not unseparated material. Net price 8,999.00€ +19% VAT 1,709.81€ Gross price 10,708.81€ Our machines are CE-certified. Subject to errors. Images, prices, and features may differ.

Condition: good (used), Year of construction: 2006, Concrete mixing plant Imer Betomatik 508 - Year of manufacture: 2006 - Capacity: approx. 10 cubic meters/hour - Cement silo: 40 tons - Mixing portal with mixer and control system - Scraper arm with chain for 2 types of gravel Reference image Crodpfxsm Uyvks Adrjh