Used Ari Jl1040 Dn32 Pn6 for sale (2,530)

Condition: excellent (used), For sale: ZMM C8C lathe as shown in the photos, marketed under the Huvema brand for the Dutch market. The machine comes from a school workshop where it has been in operation since its production. The condition of the machine is very good. On-site loading of the machine is provided. Turning trials were performed using a VCGT insert with a radius of 0.2. 160 mm Bison chuck with split jaws Dodpfx Ajy Rq Utskhewa Turning length: 750 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Tailstock taper: MK3 Spindle speeds: 85–2000 RPM 12 spindle speed steps

Condition: used, functionality: fully functional, empty load weight: 400 kg, maximum load weight: 950 kg, overall weight: 1,350 kg, axle configuration: 1 axle, first registration: 10/2017, next inspection (TÜV): 04/2027, loading space length: 2,700 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, total length: 3,950 mm, total width: 1,560 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2017, SARIS High Loader PS1513 with High Tarpaulin and Loading Ramps Rental Trailer for Sale Internal dimensions: 270cm x 150cm x 30cm Gross weight: 1350kg Unladen weight: 400kg Hot-dip galvanized steel frame Aluminium side panels, 30cm high, can be folded down and removed on all sides 15mm thick, robust, and anti-slip phenolic plywood floor Tie-down rings on the sides of the floor Automatic jockey wheel 13-pin plug Reversing light and rear fog light with triangular reflector 13-inch reinforced commercial tires Crank-down rear supports Integrated loading ramps with 2800kg load capacity Shock absorbers High tarpaulin, 180cm, can be opened on all sides Vehicle is sold with a new general inspection (MOT/TÜV)! Dwedpfx Akoy Dtr Iehea Haven't found the right trailer yet? We have 50-100 vehicles in stock and immediately available for pickup. Our workshop is open weekdays from 8:00 am to 5:00 pm for all kinds of repairs. Specialist in axle repairs, including for caravans.

Condition: excellent (used), Vacuubrand Chemical Diaphragm Pump Here, we offer a Vacuubrand chemical diaphragm pump. VACUUBRAND VARIO Chemical Diaphragm Pump MV 10C EX VARIO Technical data: Max. pumping capacity 50Hz 8.1 m³/h Ultimate vacuum 2 mbar / 1.5 torr Ultimate vacuum with gas ballast 10 mbar / 7.5 torr Number of cylinders 8 Number of stages 4 Vacuum display / controller type without controller Ambient temperature, lower limit, operation, in °C 10°C Ambient temperature, upper limit, operation, in °C 40°C Ambient temperature, lower limit, storage, in °C -10°C Ambient temperature, upper limit, storage, in °C 60°C Max. outlet pressure absolute in bar 1.1 bar Suction-side connection small flange KF DN 25 Pressure-side connection small flange KF DN 16 Rated power in kW 0.5 kW Minimum speed VARIO in min-1 30 min-1 Maximum speed in min-1 1500 min-1 Nominal speed in min-1 1500 min-1 IP protection class according to IEC 60529 IP 54 Dimension L in mm 560 mm Dimension W in mm 457 mm Dimension H in mm 410 mm Weight in kg 61 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 rpm (VACUU·PURE®) 42 dBA EX approval pumping chamber (pumped gases): II 2G Ex h IIC T3 Gb X, outdoor area with inert gas purging: II 2G Ex h IIB T4 Gb X, outdoor area without inert gas purging: II 3G Ex h IIB T4 Gc X, motor: II 2G Ex db IIB T4 Gb NRTL certification No Nominal voltage range 1 (in V) 230 V Mains frequency voltage range 1 (in Hz / DC) 50 Hz Weight 61 kg Type: MV 10C EX VARIO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone. Dwsdpfx Aezgci Sokhja

Condition: excellent (used), 427 USED refrigerated proofer, tunnel freezer Volmari (20). EXTERNAL DIMENSIONS (in cm): - W: 240, - L: 800. Dodpfx Aozi Un Sskhswa The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2000, pressure 105 t chamfer lenght 3100 mm distance between columns 2600 mm table width 100 mm table height 750 mm Control DELEM DA 65 dayligth 200 mm working feed 0 - 10 mm/sec return speed 0-100 mm/sec rapid traverse - up max. 100 mm/sec voltage 380 V / 50 Hz Dwjdpfjvq R Uuox Akhoa total power requirement 11 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4 x 2,2 x 2,8 m Equipment: • CNC-control DELEM DA65 graphic video • controlled backgauge 2 axis • upper and lower tool • 2 hand control / foot switch

Condition: excellent (used), Year of construction: 2000, Dreh-Øüber Bett 320 mm Dreh-Øüber Support 185 mm turning length 1000 mm Spindelbohrungs -Ø/ Aufnahme 32 mm mm spindle turning speed range (12) 85 - 2000 U/min Dwodpfxotv Iibs Akhea feeds - longitudinal 0,006 - 1,77 mm/min feeds - cross 0,003 - 0,888 mm/min thread - mm pitch 0,1 - 28 mm thread - module 0,1 - 1,75 mm thread - inch 2,5 - 75 inch. voltage 400 V / 50 Hz power capacity 2,2 kW weight of the machine ca. 0.8 t dimensions of the machine ca. 1,8 x 0,8 x 1,4 m Quick-change toolholder with 5 cassettes, fixed steady, 3-jaw chuck Ø 200 mm, coolant device,

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks Dsdpfxsvtgaxs Akhewa The machine is isobaric

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Dwedpfx Aoyilyqskhsa Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg Dwodpfox Rpgbsx Akhsa - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Year of construction: 2017, condition: used, Used overhead crane system with vacuum lifting device Year of manufacture: 2017 Load capacity: 250 kg (at the lifting device) Crane travel: 6 m Bridge: 6 m Vacuum lifting device B 3 UW H K 250 V with 2 oval suction cups 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely variable Operation via special handle on the vacuum lifting device. Dwsdpfxjzc Agdo Akhja The lifting movement is controlled infinitely variable via a frequency converter. Availability: short notice Storage location: Flörsheim

Year of construction: 2024, condition: new, Return System Year of manufacture: 2024 The RTS Compact is a standalone system that can be connected to any edgebanding machine (KAM), regardless of the manufacturer. The feed speed is continuously adjustable to match the speed of the edgebander. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optional: "RTS Compact Conveyor Extension" for easy rotation of parts during cross-edge banding. Optional: "RTS Compact Ergonomics Package" available. A lift table and air cushion table are used at the end of the return conveyor. This option enables ergonomic operation. Dodpfx Akjw Nadmjhjwa - Compatible with edgebanders from all manufacturers - Allows single-operator control of the edgebander - Maximum ergonomics - Reduced personnel costs - Gentle material handling - Installation time approx. 0.5 day - Turning device for small parts - With conveyor belt L 4500 x W 800 mm Single-track roller rail RTS Compact control, optional control box Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2026, overall weight: 5,250 kg, fuel type: diesel, tank capacity: 800 l, color: red, power: 400 kW (543.85 HP), output current: 720 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 440 kW (598.23 HP), nominal power (apparent): 500 kVA, total length: 4,450 mm, total width: 1,600 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: DOOSAN, type of cooling: water, Are you looking for a customized uninterruptible power supply (UPS), emergency power system, or a complete energy system for industry, commerce, data centers, hospitals, agriculture, or critical infrastructure? Albari Power Systems GmbH develops, manufactures, and supplies customized uninterruptible power supplies (UPS), emergency power systems, hybrid energy systems, and complete power plants according to customer requirements. From a single emergency power system to a fully automated microgrid, you can get everything you need from a single source. Our services: * Diesel generator sets, from kVA to over 2,500 kVA per unit * Emergency power systems according to customer requirements * Uninterruptible power supplies for industry, hospitals, data centers, and infrastructure * Island operation * Grid-parallel operation * Peak load management * Load distribution between multiple generators * Fully automatic grid monitoring * Synchronization systems * Customer-specific switchgear * Energy management systems (EMS) Integration of complete energy systems: Our switchgear and energy management systems enable the seamless integration and fully automatic control of: * Photovoltaic systems (PV) * Battery storage systems (BESS) * Diesel generators * CHP plants * Public power grid * Consumer systems * Charging infrastructure * Industrial plants In doing so, we develop individual operating strategies for: Dwsdpefn Efxjfx Akhsa * Self-consumption optimization * Emergency power supply * Peak load reduction * Load management * Microgrids * Island grids * Hybrid energy systems Our generator sets are supplied according to customer requirements: * Open design * Soundproof enclosure design * Weatherproof container design * Special containers * Mobile power plants Optionally available: * Fuel systems * Day tank systems * Automatic fuel replenishment systems * Remote monitoring * Cloud monitoring * Remote maintenance * SCADA systems * ComAp-based control systems * Grid analysis and energy monitoring Scope of supply: * Engineering and project planning * Manufacturing * Documentation * Load tests * Delivery * Installation * Connection * Commissioning * Training of operating personnel Each system is individually planned and manufactured according to the customer's technical requirements. Albari Power Systems GmbH Your partner for emergency power, uninterruptible power supplies, battery storage, energy management systems, and hybrid energy systems. Price: Upon request, depending on the scope of the project and technical design.

Condition: excellent (used), Year of construction: 2015, volume flow: 2 m³/h, operating pressure: 10 bar, pressure: 10 bar, Equipment: refrigerant dryer, BOTTARINI KSV 15 screw compressor Dwjdpfx Ajwxzf Eokhoa Variable speed (inverter-driven) With integrated refrigerant dryer 15 kW motor, Capacity 2 m³/min, Pressure 10 bar Year of manufacture 2015 Compressor is fully operational.

Condition: new, Year of construction: 2026, Are you looking for a professional storage solution for industry, commerce, agriculture, photovoltaic systems, or emergency power supply? With the APS 2000 kWh - 4000 kWh battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical Data * Storage capacity: 3 MWh or 4 MWh per container * AC power: 1.5 MW or 2 MW * Lithium iron phosphate technology (LFP) * High-quality cell, cell module, and BMS technology based on CATL components * Integrated power electronics for industrial and utility applications * Liquid cooling and air conditioning system for continuous operation * Integrated protection and safety systems * Grid-parallel operation, island operation, and hybrid operation possible * Expandable to storage farms with several MWh up to the double-digit MWh range Typical Applications * Self-consumption optimization * Peak shaving (load peak reduction) * Electricity cost reduction * PV surplus storage * Grid stabilization * Load shifting * Curtailment reduction * Feed-in optimization * Black start capable energy systems * Emergency and backup power supply * Hybrid solutions with PV, BESS, and generators Optionally available * APS Energy Management System (EMS) * Grid-parallel operation * Island operation * Black start concepts * Integration of PV systems * Integration of diesel generators * Integration of CHP systems * Integration of charging infrastructure/charging stations * Energy flow optimization * Remote monitoring and energy management Dwodpfxjgu Ruke Akhsa * Multi-container systems with several MWh total capacity Your Advantages ✓ High safety through LFP cell technology ✓ High-quality CATL technology for cells, cell modules, and BMS ✓ Very high cycle life (≥ 8,000 cycles) ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems ✓ German system integration by Albari Power Systems ✓ Multi-level safety and fire protection concept ✓ Grid-parallel, island, and hybrid operation ✓ Scalable from a single container to a large storage farm ✓ Individual project planning and commissioning ✓ Service and support Turn-Key Solutions from a Single Source Albari Power Systems supports you from the initial project idea to the finished commissioning: * Project analysis and economic evaluation * Storage sizing * EMS configuration * Grid and protection concepts * Engineering * Commissioning * Service and maintenance Designed in Germany The APS large storage containers are designed and engineered in Germany. Architecture, safety concepts, EMS logic, and integration strategies are developed according to European standards and industrial quality standards. We would be happy to create an individual concept for your project. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration

Condition: new, Year of construction: 2026, overall weight: 5,500 kg, fuel type: diesel, tank capacity: 1,000 l, color: red, power: 400 kW (543.85 HP), output current: 720 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 440 kW (598.23 HP), nominal power (apparent): 500 kVA, total length: 4,450 mm, total width: 1,600 mm, total height: 2,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, Are you looking for a professional energy storage solution for industry, commerce, agriculture, photovoltaic systems, or emergency power supply? With the APS battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical data: * Storage capacity per unit: 233 / 254 / 440 kWh * Power: 115 / 125 / 220 kWp * Lithium iron phosphate technology (LFP) * High-quality battery modules based on CATL technology * Liquid-cooled battery system Dedpjt Aa Idofx Akhowa * Integrated battery management system (BMS) * Suitable for indoor and outdoor installation * Expandable to larger storage systems up to 2 MWh per application Areas of application: * Self-consumption optimization * Peak shaving (load peak reduction) * Electricity cost reduction * PV surplus storage * Emergency and backup power supply * Industrial and commercial enterprises * Agriculture * Charging infrastructure * Municipal utilities and energy suppliers Optionally available: * APS Energy Management System (EMS) * Island operation / microgrid solutions * Integration of photovoltaic systems * Integration of diesel generators * Integration of charging infrastructure / charging stations * Remote monitoring and energy management * Container solutions up to several MWh per unit Your advantages: ✓ High safety thanks to LFP cell technology ✓ Long service life and high cycle stability ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems ✓ German system integration by Albari Power Systems ✓ Individual project planning and commissioning ✓ Service and support We will gladly create an individual concept for your application. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-25, empty load weight: 1,170 kg, maximum load weight: 2,330 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 406 204 3500 2 HD E Three-sided tipper NEW VEHICLE Internal dimensions: 406cm x 204cm Side board height: 35cm Loading platform height: 71cm Dwedpozg A I Ujfx Akhsa Total weight: 3500kg Payload: 2330kg Braked tandem axle trailer Overrun brake and parking brake from AL-KO Largest possible axle and brake Extended axle support Low chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile side boards with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Heavy-duty support wheel 500kg 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED outline lights at the front LED lighting at the rear Upper frame mounted on rubber Large tilting angle of 44 degrees backwards Lateral tilting by repositioning the safety pins Electric tilting control with plug for charging the 12V battery Electric limitation of the tilting angle to the side U-rail for attaching the original SARIS ramp Preparation for ramps OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Leaf springs -Spare wheel with holder -Without side boards (price reduction) -Black Edition (Powder-coated side boards and rims in black) -Integrated ramps 2800kg -Charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work when the vehicle is tilted -Folding crank rear supports -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in different heights, also closed -Extension side boards 30cm with tension lock -Flat cover with or without bow -High cover 180cm or 200cm More accessories available on request! Plus shipping to Gera and vehicle registration document €380 net Images are for illustrative purposes only and may show optional accessories that incur an extra charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock for you to take away. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repairs, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come by!

Condition: good (used), Year of construction: 2003, functionality: fully functional, Press force: 135 t Bending length: 4100 mm Frame width: 3600 mm Control system: DELEM Rapid traverse speed: 100 mm/sec Bending speed: 10 mm/sec Dedpfx Akezg A D Nohewa Total power requirement: 15 kW Machine weight (approx.): 11,700 kg

Year of construction: 1998, condition: excellent (used), 1 x Centrifuge Aryma / Rimann 2.5 liters Year of manufacture: 1998 with open basket Dwodpfjigni Isx Akhoa in excellent optical and technical condition Technical data: Max. capacity: 3 kg / 2.5 liters The machine can be inspected while running at any time.

Condition: like new (used), Year of construction: 2024, Year of manufacture: 2024 Like new condition Film width: 422 mm Dsdpfx Akozfipcohewa Take-up length: 460 mm

Condition: used, functionality: fully functional, CESOIA MECCANICA usata BARIOLA 3000x10mm,interspazio lame variabile,REGISTRO SOLLEVABILE DA 1000mm.REVISIONE A NORME CON IMPIANTO ELETTRICO NUOVO. Dwodpfxjzhkl Re Akhja

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1200603/R, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 3 mm, overall weight: 4,000 kg, input voltage: 380 V, total width: 3,000 mm, total height: 2,250 mm, total length: 7,600 mm, cutting height (max.): 20 mm, table height: 790 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 100 A, working length: 6,000 mm, input current: 31 A, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 200 mm, type of cooling: water, height adjustment type: mechanical, input frequency: 250 Hz, water tank capacity: 25 l, power: 3 kW (4.08 HP), Equipment: documentation/manual, HD Plasma Cutting System – Farina – 2000x6000 mm – Excellent Condition For sale: High-definition (HD) plasma cutting system by Farina, year 2003, in excellent working condition. This machine is a robust and reliable solution, ideal for heavy-duty fabrication and precision work on large formats. Technical specifications: - Brand: Farina - Year of manufacture: 2003 - Worktable dimensions: 2,000 x 6,000 mm - Generator: Hypertherm HD3070 (High Definition), synonymous with quality and precision in plasma cutting. - Included equipment: Dedicated dust extraction system and filters (MA-FER). - Software: Controlled via InfoLab software. - New torch: Original PAC186 torch, upgraded to HyPerformance HD3070 Key features: Dsdjzkhmdjpfx Akhswa - Worktable dimensions ideal for handling large sheet metal. - Hypertherm HD3070 technology guarantees superior cutting quality compared to standard systems. - Complete system with dust extraction, ready for use. - Robust machine, perfect for those seeking an excellent balance between investment and productivity.

Condition: ready for operation (used), maximum belt width 240mm mechanical oscillation unit spacing 200-1290mm screw-type belt tensioning star/delta starter manual adjustment of unit spacing cast iron housing dimensions of the side table 920x350mm two 7.5kW motors Dodpezhuv Hefx Akhewa

Condition: used, -Brand: Brevetti Gasparin -Model: Mod.450 -Dimensions: 1980x1605x915 mm -Usable bread length passage: 400–500 mm -Usable bread height passage: 100–140 mm -Standard slice thickness: 8.5 / 9.5 / 10.5 / 11.5 / 12.5 / 13.5 mm -Hourly output (sliced breads): 300–500 pcs -Power: 1.1 kW -Motor power: 1.5 HP -Compressor motor power: 2 HP -Voltage: 380V / 50Hz / 3ph Dwodjwx Rkqopfx Akhsa -Weight: 385 kg -Year of manufacture: 2003

Condition: ready for operation (used), Year of construction: 2018, pressing force: 189 t, stroke length: 300 mm, total width: 2,600 mm, total height: 3,440 mm, overall weight: 18,000 kg, product length (max.): 5,000 mm, Press brake manufactured in 2018. This GASPARINI 4000×185 features a pressing force of 1850 kN and a bending length of 4100 mm. It includes a CNC backgauge with multiple axes and a G-REFLEX frame deflection compensation system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI 4000×185 machine we have for sale. Contact us for further details. • Distance between frames: 3600 mm • Ram • Throat depth: 500 mm • Daylight opening: 500 mm • Working height: 950 mm • Backgauge • CNC backgauge: GHP-5 • Axes: X, R, Z1, Z2, X5 • Pneumatic retractable supports • Heavy-duty double linear guide system • Speed • Rapid approach: 270 mm/s • Working: 0–10 mm/s • Return: 120 mm/s • Control: ESA CNC control • Compensation system • G-REFLEX frame deflection compensation system • G-CS automatic crowning system Dwodpfxjzd Elqe Akhja • Motor & electrical • Main motor power: 18.5 kW • Voltage: AC 400 V • Frequency: 50 Hz • Phase: 3P + PE • Installation: Pitless (machine without foundation pit) Additional equipment • No external/auxiliary equipment listed • Included documents: CE Declaration, Technical Documentation Technical Specification Bending Length 4100 mm

Condition: as good as new (ex-display), Adapter version for Variolock Variolock diameter: 80 mm Dwsdeb Tywropfx Akhja Length: 220 mm Diameter: 140 mm Article number: 3441068146 3S 45812