Used Automatic Drilling And Milling Machine for sale (81,343)

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Iodpfjw E H E Rjx Ai Rjtk Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Table size: 1120 x 280 mm T-slots in table: 3 x 16 mm Table longitudinal travel: 600 mm Table transverse travel: 250 mm Vertical travel: 360 mm Itedpfx Aioybb T Hj Rjk Spindle rotation: +/-45° Distance between table surface and spindle face: 230–630 mm Maximum spindle speed (vertical): 108–2400 rpm Maximum spindle speed (horizontal): 90–2000 rpm Spindle taper: ISO 40 Spindle stroke: 120 mm Power: 2.2/2.2 kW (vertical/horizontal spindle) Dimensions: 1700 x 1450 x 2245 mm (W x D x H) Weight: approx. 1350 kg Accessories, features: - 3-axis SINO digital read our system - spindle feedrate in three steps - 200 mm machine vice - 45° tiltable spindle head - Rotating console - Rotating machine table - 2 x reducers (ISO40/MK3, ISO40/MK2) - Drill head with collet, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 x 15-piece chuck set, diameter 2 – 20 mm - Clamping set - Work light - Cooling water system

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Included: Itjdpfx Aieznd Sko Rsk - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Itedpfx Aieu Id H Ae Rok Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Siegfried Volz Machine Tools Itedpfot Uzk Rox Ai Rjk Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Itedpfx Aijzi Awhj Rjk Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear Ijdpfozu Ryhex Ai Rjtk • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck Isdpfxszmuntj Ai Retk

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp Itodpfoxwvrusx Ai Rok - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: good (used), Csepel RF50/1250 Radial Drilling Machine Itedszninwepfx Ai Rsk A robust and proven radial drilling machine from the quality manufacturer Csepel (Model RF50/1250). The machine is characterized by its solid construction and is ideally suited for metalworking shops, general workshops, or demanding DIY enthusiasts. Technical specifications (according to nameplate): Manufacturer: Csepel (Budapest) Type: RF50 / 1250 Power supply: 3~ (three-phase / 380 V) Frequency: 50 Hz Control voltage: 220 V Operating current: 10 A Required fuse protection: 16 A (slow-blow) You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system Itodpsy S Shwofx Ai Rok

Condition: good (used), Fritz Werner Universal Tool Milling Machine, Type 5130 An extremely robust and precise universal tool milling machine from the long-established, high-quality German manufacturer Fritz Werner (Model 5130). This conventional knee-type milling machine stands out due to its solid grey cast-iron construction and exceptional reliability. It is ideally suited for workshops, toolmaking shops, repair facilities, demanding DIY enthusiasts, or training centers. The machine features a swiveling vertical milling head with manual quill feed (perfect for additional drilling operations) as well as a mechanical feed gearbox. A standout feature is the retrofitted premium safety spindle guard from Tecno Più. Technical specifications at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Design: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with drawbar) Table dimensions: Approx. 600 x 215 mm with 3 parallel T-slots Axis movement: Manual via precision handwheels (2 mm travel per revolution) + automatic feed (Type 101) Vertical head: Swivels ± 90° with manual quill lever and adjustable depth stop Drive: Three-phase motor (400 V, CEE plug included) Included accessories: Solid machine vise (mounted on table), drawbar, chip guard hood Safety upgrade (included): Iedpfxozcw Dde Ai Retk Spindle guard: Tecno Più S.r.l. (Model PTR 11/180) Year of manufacture of guard: 2017 (CE marked) Function: Impact-resistant polycarbonate shield (180 mm) with IP67 safety microswitch for automatic spindle cut-off when the guard is open. You can find other milling machines—new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm Itedpfsy Nb Tksx Ai Rsk For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Iedpfx Aisx Aqi Ej Rjtk Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: good (used), functionality: fully functional, Table dimensions 1250 × 290 mm, 800 mm X travel 370 mm Y travel 450 mm Z travel automatic feed on drilling quill, 3 settings: 0.035 / 0.070 / 0.140 automatic feed and rapid traverse on X and Y axes electric rapid traverse on Z axis Ijdpfx Aezi Hihji Rjtk Spindle ISO 40 with speed range 56–4500 rpm, table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) machine weight approx. 1.7 tons. year of manufacture: 1986 Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we recommend you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: ready for operation (used), Alzmetall AB 35 HST / Bench drill press & Walter Gras Arbo3 quick-change head -Drilling capacity / steel approx. 40mm -Drilling capacity / cast iron approx. 45mm -Threading capacity max. M25 -Spindle taper MK 4 -Spindle stroke 180mm -Speed range (VARIABLE) 65 - 1750 rpm -Switchable speed range 130-480 / 480-1750 rpm -Automatic feed rates 0.1-0.2-0.3mm/rev -Drilling depth adjustable via depth scale -Speed indicator -Right / left rotation -Swiveling drill head with tool -Height-adjustable work table via hand crank -Coolant system -Emergency stop -Work light Dimensions: L x W x H 1 x 0.8 x 2.1 meters / Weight approx. 1200KG Itsdpfx Aiozn Unvj Rek Errors and omissions excepted.

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 Itsdpfx Aohvi Duei Rok N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Itodpfxsya H Nko Ai Rek Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input frequency: 50 Hz, working width: 1,200 mm, For sale: Throughfeed drilling and dowel inserting machine LAZZONI Group – model Next 2+3K, designed for efficient series production of furniture components. The machine is equipped with automatic infeed and outfeed of workpieces, allowing for single-operator use and significantly reducing production costs. Key Information: Manufacturer: Lazzoni Group Model: Next 2+3K Year of manufacture: 2018 Control: PLC + operator panel (HMI) Functions: Drilling + automatic dowel insertion Working width: 230–1200 mm Working height: 10–22 mm Working depth: 40–260 mm Power supply: 400 V / 50 Hz Installed power: 9.1 kW Machine weight: approx. 2900 kg CE certificate Working Configuration: - Number of heads: 5 - 2 side heads - 3 top heads - Total number of spindles: 35 (7 spindles per head) - Spindle pitch: 32 mm - Throughfeed operation – ideal for repeatable parts Automation and Ergonomics: - Infeed magazine - Outfeed magazine (no need for a second operator) - Automatic dowel insertion - Fast retooling/changeover - Stable and repeatable operation for large production runs Applications: - Drawer side production - Furniture carcass components - Fronts, sides, rails - Ideal for both large factories and smaller businesses focusing on automation The machine is in good working condition, has been used in serial production, and is available for inspection onsite. Iodpfjywxy Rjx Ai Rotk Loading assistance available. Location: Elbląg Net price: 25,000 PLN

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Isdpfsytpl Uox Ai Rotk Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h Itsdpfx Aistvmtks Rjk table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual

Condition: new, Year of construction: 2026, The CORMAK ZX 7055 VARIO DRO milling and drilling machine is a high-performance universal machine designed for drilling, milling, and tapping operations in steel and cast iron. Its robust cast-iron construction, continuously variable spindle speed control in two ranges, and digital position readout system ensure high accuracy and repeatability in single-piece and small-batch production. Main Advantages of the Machine Rigid cast-iron base and column – provide excellent stability during machining of demanding workpieces, reduce vibrations, and extend tool life. Continuously variable spindle speed control in two ranges: Low range: 75–438 rpm High range: 438–2500 rpm Allows optimal selection of cutting parameters depending on tool diameter and material. 2-axis digital readout system (DRO) – enables fast and accurate positioning while reducing setup time and eliminating reading errors from manual scales. Automatic spindle feed – ensures smooth cutting performance and reduces the risk of drill breakage during deep drilling operations. Thread cutting function – after reaching the preset tapping depth, the spindle automatically reverses direction. Ground gears – provide quiet transmission operation and stable spindle torque. Dovetail slideways on machine axes – ensure precise table movement and accurate geometry. Rotating head ±90° with height adjustment – allows easy execution of angled machining operations, chamfers, and undercuts. Left/right spindle rotation – enables safe tapping and tool withdrawal. Efficient cooling system – effectively removes heat from the cutting zone, prevents overheating of tools and material, improves machining accuracy, and extends cutting tool life. The core of the machine is a heavy cast-iron structure with wide guideways, minimizing deflection during face and end milling operations. The large cross table provides a spacious working area and features a precisely ground surface to ensure accurate workpiece positioning. Itsdpfoyapyrex Ai Rsk The spindle with an MK4 taper is driven by an S1/S6 1.5/1.8 kW motor with variable speed control. The integrated cooling system stabilizes the cutting temperature and improves the quality of machined surfaces. The combination of a 2-axis DRO system, ground gears, and rigid guideways provides excellent dimensional repeatability and high surface finish quality. The automatic spindle feed and two-speed spindle range allow optimal machining parameters for: drilling in steel up to Ø32 mm, drilling in cast iron up to Ø45 mm, face milling up to Ø80 mm, end milling up to Ø28 mm. Standard Equipment Variable spindle speed control 2-axis digital readout system (DRO) Ø80 mm milling cutter head with inserts Drill chuck Cooling system Technical Specifications Parameter Value Maximum drilling capacity – cast iron (HT200) 45 mm Maximum drilling capacity – steel 32 mm Maximum face milling diameter 80 mm Maximum end milling diameter 28 mm Working table dimensions 820 × 240 mm Table travel (X/Y) 595 / 185 mm Maximum tapping capacity M24 Spindle taper MK4 Motor power (S1/S6) 1.5 / 1.8 kW Low spindle speed range 75–438 rpm High spindle speed range 438–2500 rpm Spindle travel – manual 107 mm Spindle travel – automatic 100 mm Distance spindle axis to column surface 250 mm Maximum distance spindle nose to work table 445 mm Net weight 350 kg Overall dimensions 1084 × 924 × 1550 mm Height with base 2150 mm

Condition: good (used), Year of construction: 1989, machine/vehicle number: 8906756, functionality: fully functional, actuation type: pneumatic, overall weight: 84 kg, GRASS BBM /ST with adapter for BLUM fittings Row drilling unit – hinge plate drilling – drilling for base plates – drilling for press-in dowels – adapter for pressing in the hinge plates and base plates. Iedpfxezvn N Ne Ai Rotk

Condition: good (used), 3x Aciera milling machines for sale together for €10,500 Also available separately Photo 1 frequency-controlled €4,950 Photo 2 €3,950 Photo 3 €3,450 General Information Itedpfeyl Rwvjx Ai Rek Aciera F3 milling machine. Automatic longitudinal feed (X-axis). Automatic Z-axis feed (photo 1 and 2) Spindle mount W20 Three-phase power 400V Axis travels X-axis: 300 mm Y-axis: 300 mm Z-axis: 135 mm Digital readout on all axes (photo 1 and 2)

Condition: new, Year of construction: 2026, The ZX 7045E 230V milling/drilling machine is a versatile tool for machining steel . It is ideal for drilling, reaming, boring, threading , milling and face milling. The machine allows precise drilling of holes in cast iron up to 45/40 mm in diameter. In addition, bolts up to M12 mm can be threaded, up to 80 mm wide can be milled and rebates up to 22 mm deep can be made. The ZX 7045E milling/drilling machine is a reliable tool ready to go! Machine characteristics Heavy Stable Cast Iron: The robust construction based on heavy cast iron ensures stability and durability of the machine even during intensive use. Milling machine height adjustable on the slide: The unique height adjustment on the slide, rather than on the column, allows the machine to be adapted to different applications. Massive Cross Table for Milling/Drilling Machine: An impressively sized table with a precision-ground surface provides a solid base for a variety of projects. Swallow Tail Shaped Guides: Innovative dovetail-shaped slides guarantee smooth movements in three axes for excellent machining results. Quiet Operation Thanks to Ground Gear Wheels: The ground gears make the machine run quietly, which contributes to comfort in the workshop. Left and Right Rotation: Rotate the tool in both directions, adapting to different tasks. Pivoting head +/- 90 degrees and Adjustable head height: Flexibility in angle setting and height adjustment allow full control over material processing. Additional Options, Additional Benefits: The ZX 7045E version is available from stock and you will also receive a kit free of charge: Drill chuck Reduction bush MK4/MK3 Reduction bush MK3/MK2 The ZX 7045E milling/drilling machine is not just a tool, it is a partner that can meet even the most demanding challenges in your workshop. Order now and experience perfect precision and performance! (Base available as an option) Technical data Maximum drilling diameter 45 mm Maximum face milling diameter 80 mm Maximum cylindrical milling cutter diameter 28 mm Maximum thread diameter 12 mm Spindle pin protrusion 100 mm Spindle taper MT4 Spindle speed (6 speeds for 1400r/min motor) 1400r/min ) 95, 170, 280, 540, 960, 1600min-1 Maximum distance from spindle nose to table Itedpfx Aijwnb T Io Rjk 460 mm Travel in X / Y / Z axis 500 / 210 / 425 mm Distance from spindle to column surface 245 mm Work table dimensions 730x210 mm Base dimensions 400x600 mm Motor s1/s6 1500W/2100 W 230V Machine dimensions (height with base) 1080 x 770 x 1460 mm Weight 278 kg Available accessories MK3/B18 drill chuck shank handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2