Used Awea Bm-1500 Ii for sale (7,874)

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 9171h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Knsdpfx Ansyab I Usdsa

Condition: ready for operation (used), Year of construction: 2019, A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible. Knodpsy Tav Eofx Andea

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Knjdpfx Anewhp Ndodoa

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Knsdpfxexqgxrs Andsa

Year of construction: 1978, condition: ready for operation (used), Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible. Kodpfxsxtpq No Andsna

Year of construction: 2001, condition: ready for operation (used), A hydraulic CNC press brake Hämmerle (M+S Brugg AG) is available. Press force: 2000kN, max. working length: 3100mm, max. stroke: 400mm, max. throat depth: 250mm, frame distance: 3240mm, max. opening width: 965mm, max. sheet thickness: 8mm. Machine dimensions X/Y/Z: approx. 4400mm/2700mm/3400mm, weight: approx. 16600kg, control system: CNC Infinitron. Documentation available. An on-site inspection is possible. Kedpfx Anezcyq Tjdsna

Condition: ready for operation (used), Year of construction: 2013, Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible. Knedpfeuqac Dsx Andja

Year of construction: 1999, condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Knsdst E Trhopfx Andea

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Kodpfx Aex Aunxsndona

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Ksdpoyab Nfjfx Andona

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Knodpfxeyg Nvts Andja

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Kjdpfx Ajzhntrsndona

Condition: ready for operation (used), Year of construction: 2013, Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement. Ksdpfxey Uyfve Andena

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Kedpfezc Rdkox Andsna

Year of construction: 2023, condition: ready for operation (used), A recirculating rack oven WP is available. Tray dimensions X/Y: 600mm/800mm, max. rack trolley diagonal: 1070mm, max. rack trolley height: 1800mm, baking area: 10m², max. tray load: 350kg. Machine dimensions X/Y/Z: approx. 1550mm/1650mm/2550mm, weight: approx. 2000kg, controls: Navigo 3. Documentation available. An on-site inspection is possible. Knsdpfxsx Ivike Andea

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Kodpezcfhdofx Andena

Condition: ready for operation (used), A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible. Knjdpfx Aszka I Tjndsa

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Knedpfjzu At Tox Andea Complete with manuals and CE certificate.

Condition: used, mileage: 90,000 km, power: 81 kW (110.13 HP), first registration: 10/2017, fuel type: diesel, overall weight: 2,800 kg, fuel: diesel, emission class: euro6, number of seats: 3, total length: 4,963 mm, total width: 2,050 mm, total height: 2,254 mm, Equipment: air conditioning, central locking, trailer coupling, truck registration, Truck registration, First owner, Air conditioning, 6-speed transmission, Gross vehicle weight 2.8 tons, Trailer coupling 2,000 kg, Central locking with remote control, Partition, 3 seats, Electric windows, Electric exterior mirrors, EURO 6, German registration Knedpjzd Elksfx Andea There may be lettering on the vehicles. Mileage according to odometer Vehicle is preferably sold to businesses or for export; Private sale possible, subject to availability. Sale without warranty Net price for export Net: 3,500 EUR + (19% VAT) 665 EUR = Gross: 4,165 EUR The above information is non-binding; errors/changes and prior sale are subject to change!

Condition: refurbished (used), Year of construction: 2014, Technical specifications: Product number VWP 1500 Year of manufacture 2014 Capacity 1000 m3/h Maximum vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a complete overhaul and is ready for operation. Kedpfozvrg Eex Andjna New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: refurbished (used), functionality: fully functional, Technical specifications: Product number: WV 1500 B 001 Year of manufacture: 2004 Capacity: 1500 m3/h Maximum vacuum: 0.09 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2 to 3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Kodpjzvrgrsfx Andsna Achieves a vacuum of 0.09 mbar.

Condition: ready for operation (used), M.G.M. electric motors, type: BM 71 C4, motor serial number: 15090268, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Knedpei D I Hyjfx Andea

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm Knodpfx Anjt Tqgxsdsa turning diameter over slide rest 350 mm turning length 1500 mm spindle bore 65 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U total power requirement 9 kW weight of the machine ca. 4,5 t

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm Knodpfx Ansxp Rzbjdea turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Year of construction: 1988, condition: used, tool adaptor SK 40 Kodpfsipyx Eox Andona weight 165 kg Type Uni. 0 Universal type milling head with SK 40 spindle of a milling machine Heckert FU 315.