Used Ayen Chamfering Unit for sale (40,260)

Condition: new, Description The SAT4-700PETH-O "QUATROMAT" is an innovative band saw with a new design, equipped with a special carbide-tipped saw blade (700/30 x 6.0/4.5 mm, 72 teeth). It features a 5 m long, hydraulically pivoting conveyor belt that can be moved up to 15° to the left or right and reaches a discharge height of up to 3.0 m. The double-acting hydraulic cylinder on the conveyor belt and the drive coupling with emergency shut-off for the saw blade provide additional safety and efficiency. The saw drum offers four channels and can process round wood with a diameter of up to 160 mm and half-round wood up to 240 mm. The cutting lengths are freely adjustable between 25 and 52 cm, with a maximum cutting speed of 60 cuts per minute, supported by a 9 cm³ pump. With a weight of approximately 984 kg and dimensions of 2680 x 1593 x 2307 mm, it is a robust tool. For PTO operation, a universal joint shaft with freewheel is recommended. - New design - NEW: Special carbide-tipped saw blade 700/30 x 6.0/4.5 mm, 72 teeth - 5 m conveyor belt, approx. 15° left/right hydraulically pivoting - Max. discharge height 3.0 m - NEW: Double-acting hydraulic cylinder on the conveyor belt - NEW: Drive coupling with emergency shut-off for the saw blade - 4 channels of the saw drum - Up to 160 mm Ø round wood - Up to 240 mm Ø half-round wood - Cutting lengths 25-52 cm with freely adjustable intermediate steps - Adjustable cutting speed, max. 60 cuts/min - 9 cm³ pump - Dimensions with conveyor belt: L2680 x W1593 x H2307 mm - A universal joint shaft with freewheel is recommended for PTO operation! Conveyor belt length (m) / Max. discharge height conveyor belt (m): 5 m / 3 m Channels of the saw drum: 4 Three-point linkage: Cat. I and II Dimensions in transport position (H x L x W) (cm): 245 x 210 x 160 Pump: 14 L at 540 RPM Nledpfx Ae Adi I Hjngoh Drive: Combined drive with PTO and electric motor, pivoting conveyor belt Max. Ø round wood, half-round wood: 16 / 24 Max. cuts / min: 60 Wood length up to: 1 m Carbide-tipped saw blade Ø700 mm: 6.0/4.5 Ø30 mm Various cutting lengths (cm): 25, 33, 50 cm + intermediate steps

Condition: new, Wireless remote control for single-drum winches with 4 functions. 1. Releasing the cable 2. Winding up the cable 3/4. Increase throttle + and decrease throttle - Nlsdpfx Ano Adit Njgsh Scope of delivery: Handheld transmitter, receiver, hip belt, battery charger.

Condition: new, Description The RAMBO-HC20HZ is a powerful disc chipper, ideal for shredding branches up to 200 mm in diameter. Its hydraulic infeed roller, which allows for both forward and reverse operation, significantly simplifies the work. The individually adjustable infeed speed provides additional flexibility and adaptation to specific requirements. This professional chipper is equipped with four sharp blades and a counter blade, allowing even stubborn material to be processed effortlessly. The innovative 4 fins on the back of the disc guarantee effective discharge of the shredded material through the 360° rotating and 75 cm high discharge chute. For maintenance, the disc housing can be easily opened, allowing quick access for cleaning and blade replacement. The folding infeed hopper significantly improves the device's transportability and storage capabilities. Nlsdpfx Ao Adivqongoh A special 26.5-liter hydraulic oil tank with a temperature indicator is positioned compactly below the unit to ensure optimal weight distribution. The RAMBO-HC20HZ becomes an indispensable tool for professional users who demand high performance and functionality. Features - The RAMBO-HC20HZ effortlessly shreds branches up to 200 mm in diameter. - Hydraulic infeed roller with forward and reverse operation for easier work. - Infeed speed can be individually adjusted. - The professional disc chipper with four blades and a counter blade also processes stubborn material. - The four attached fins on the back of the disc throw the shredded material out via the 360° rotating and 75 cm high discharge chute. - The openable disc housing can be folded to the side for cleaning or blade replacement. - The folding infeed hopper makes it easier to transport and store the device. - The 26.5-liter hydraulic oil tank with temperature indicator has been placed compactly and for optimal weight distribution under the device. Three-point linkage: Cat. I Infeed speed: Individually adjustable Discharge chute / discharge flap: 360° rotatable / adjustable PTO speed max.: 540 rpm Tractor power requirement: approx. 20 hp Blade speed: 1,100 rpm Hydraulic oil volume: 26.5 liters Guaranteed sound power level LWA: 94.5 dB(A) Branch thickness Ø, max.: 200 mm Drive: PTO Dimensions (L/W/H): 1885 / 1917 / 2185 mm Packaging (L/W/H): 1240 / 1090 / 1175 mm

Condition: new, Description The RAMBO-HC15H is the ideal partner for all gardening and landscaping tasks. With its impressive ability to effortlessly shred branches up to a diameter of 120 mm, it offers an efficient solution for processing pruning material. The hydraulic infeed roller with forward and reverse function facilitates handling and ensures a smooth workflow. Thanks to the integrated chassis with drawbar, the RAMBO-HC15H can be quickly and easily moved, allowing you to work flexibly in your area. The professional disc chipper is equipped with two blades and a counter blade, which effectively process even tough material. The 10 moving blades on the disc ensure that the already shredded material is shredded again, resulting in a finer discharge. For optimal operation, the RAMBO-HC15H features a 360° rotating and 80 cm high discharge chute, which efficiently removes the shredded material through the attached 4 vanes. In addition, the practical filling hopper and the maintenance flap above the infeed roller enable uncomplicated cleaning and maintenance of the device. The RAMBO-HC15H is therefore the perfect disc chipper for professional users who value performance and ease of use. Features - The RAMBO-HC15H effortlessly shreds branches up to a diameter of 120 mm. - Hydraulic infeed roller with forward and reverse function for easier operation. - Integrated chassis with drawbar for quick and easy relocation. - The professional disc chipper with two blades and a counter blade also processes stubborn material. - 10 moving blades on the disc shred the already shredded material again to obtain an even finer discharge. - The attached 4 vanes on the back of the disc throw the shredded material over the 360° rotating and 80 cm high discharge chute. - The filling hopper and a maintenance flap above the infeed roller can be folded to the side for cleaning the infeed roller. Oil tank volume: 1.1 liters Blade speed: 2,250 rpm Engine starting system: Manual and electric start Dimensions (L x W x H): 2900 / 965 / 1800 mm Fuel: Gasoline Engine power, max.: 9.0 kW at 3,600 rpm Nljdpfx Ans Adiwbogsh Hydraulic oil volume: 4.0 liters Tank volume: 6.5 liters Branch diameter Ø, max.: 120 mm Engine: 4-stroke OHV gasoline engine Packaging (L x W x H): 1600 / 870 / 1230 mm Displacement: 420 cm³

Condition: new, Description The RAMBO-V2 is the powerful partner for professional garden and landscaping maintenance. Equipped with a 24.5 kW V-2 cylinder engine, this chipper effortlessly shreds branches with a diameter of up to 150 mm. The large feed hopper enables comfortable operation and significantly simplifies the work. Thanks to the integrated chassis with oscillating axle and parking brake, the RAMBO-V2 can be moved quickly and easily. The detachable drawbar provides additional flexibility. With its two blades and one counter-blade, the chipper reliably processes even tough material. The 360° rotating discharge chute enables precise positioning of the shredded material, while the adjustable discharge chute and discharge flap allow for individual adaptation to the respective requirements. In addition, the feed and discharge hoppers can be folded to the side for cleaning the blade drum or removing branches. The large, folding box provides ample space for storing protective equipment and tools. The electric start function with battery ensures convenient starting. The RAMBO-V2 combines performance, comfort, and versatility – an indispensable tool for every professional! Features - The RAMBO-V2 with its powerful 24.5 kW, V-2 cylinder engine effortlessly shreds branches up to a diameter of 150 mm. - Comfortable operation thanks to a large feed hopper. - Integrated chassis with oscillating axle including parking brake for quick and easy relocation. - Detachable drawbar. - The professional chipper with two blades and one counter-blade processes even tough material. - The shredded material is discharged via the 360° rotating discharge chute. - Adjustable discharge chute and discharge flap. - Feed and discharge hoppers can be folded to the side for cleaning the blade drum or removing branches. - Large, folding box for storing protective equipment & tools. - Convenient starting with an electric start function and battery. Starting System Engine: Electric starter Engine Power, max.: 24.5 kW at 3,600 rpm Oil Tank Volume: 2.4 liters Chipping Blades: 2 Fuel Tank Volume: 10 liters Displacement: 999 cm³ Guaranteed Sound Power Level: 124 dB(A) Nlsdpfxs Adiw Ie Angoh Dimensions (L/W/H): 2778 / 1043 / 1685 mm Fuel: Gasoline Engine: V-2 cylinder, 4-stroke OHV gasoline engine Packaging (L/W/H): 1260 / 950 / 1230 mm Branch Diameter Ø, max.: 150 mm

Condition: new, for Vogesenblitz wood splitters, models 22-27 tons. Nodpfxs Adix Ee Angslh

Condition: new, Equipment • GENERAC G-FORCE OHV engine • Fuel: Natural gas or LPG operation • Electronic speed governor • Sound-dampened aluminum housing • True Power™ electronics • Two-line multilingual Digital Evolution™ LCD controller • System status and maintenance interval LED indicators • LED indicators • Wi-Fi communication • Free Mobile Link™ Wi-Fi remote • 5-year limited warranty • Compatible with LTS transfer switch Performance data Standby power ESP (LPG) kVA 13000 Standby power (natural gas) kVA 13000 Frequency Hz 50 Voltage V 230 Phases 1 Power factor cos 1 Engine specifications Engine manufacturer Generac Model G-FORCE, 1000 SERIES Type OHV Engine cooling system Air Nsde Adin Hjpfx Angelh Number of cylinders and arrangement 2 cyl. V Displacement cm³ 999 Starting system Electric Electrical circuit V 12 Speed governor Electronic Rated speed RPM 3000 Oil capacity l 1.6 Fuel Natural gas or LPG Natural gas Gas consumption at 50% load m³/h 4.02 Natural gas Gas consumption at 100% load m³/h 6.48 LPG Gas consumption at 50% load l/h 5.58 LPG Gas consumption at 100% load l/h 8.86 Dimensions Length (L) mm 1232 Width (W) mm 648 Height (H) mm 733

Condition: new, Features • GENERAC G-FORCE OHV engine • Fuel: Natural gas or LPG operation • Electronic speed governor • Sound-dampened aluminum housing • True Power™ electronics • Two-line multilingual Digital Evolution™ LCD controller • System status and maintenance interval LED indicators • LED indicators • Wi-Fi communication • Free Mobile Link™ Wi-Fi remote • 5-year limited warranty • Compatible with LTS switchover Performance data Emergency power output ESP (LPG) kVA 13000 Emergency power output (natural gas) kVA 13000 Frequency Hz 50 Voltage V 230 Nlodpfxs Adin Tj Angsh Phases 1 Power factor cos 1 Engine specifications Engine manufacturer Generac Model G-FORCE, 1000 SERIES Type OHV Engine cooling system Air Number of cylinders and arrangement 2 cyl. V Displacement cm³ 999 Compression ratio 9.5:1 Starting system Electric Speed governor Electronic Rated speed rpm 3000 Oil capacity l 1.8 Fuel Natural gas or LPG Natural gas Gas consumption at 50% load m³/h 4.50 Natural gas Gas consumption at 100% load m³/h 7.02 LPG Gas consumption at 50% load l/h 6.83 LPG Gas consumption at 100% load l/h 10.86 Dimensions Length (L) mm 1232 Width (W) mm 648 Height (H) mm 733

Condition: new, COMMERCIAL-GRADE, FOR PROFESSIONAL CABLE LAYERS BASE UNIT WITHOUT BATTERY & CHARGER! This cable laying machine can lay up to 600 meters of wire per hour. Its revolutionary design offers high productivity and profitability! Due to its small size and weight, it can be easily transported from one location to another! Thanks to its maneuverability, it is able to lay wire from all robot manufacturers. With its tight turning radius, the PWM600MH-Li lays the cable right into the corners. Its ergonomic, adjustable, and laterally pivoting multi-position handle allows the user to install the cable even under hedges, bushes, and low branches! The high level of operating comfort is complemented by the drive system, powered by a 1 kW electric motor for 80/82V lithium-ion batteries. The PWM600MH-Li cable laying machine was developed by professionals to shorten the user's working time through its numerous features. Boundary wire from almost all manufacturers can be attached to the device using the various rollers and adapters. Thanks to the laying depth of 4 to 6 cm, the owner of a lawn robot does not have to worry about accidentally severing the cable. The easily replaceable, hardened steel blade cuts into any type of soil, whether normal, compacted, or stony. The glide foot reduces dirt deposits on the blade and gearbox shaft and prevents tearing of the turf. These are just a few of the features of the PWM600MH-Li, which is why it is the most efficient machine on the market! Motor: 1 kW electric motor for 80/82 volt lithium-ion batteries* Speed: Three speed levels up to 14 m/min Operating time with one 9Ah battery charge up to 30 min or up to approx. 420m Blade: Stable carbide blade for all soil types Close-to-edge working - possible down to 15 cm Incl. spacer, adjustable from 15 to 45 cm Laying depth: 4 – 6 cm Handle: Infinitely adjustable, laterally offset handle Cable: up to 6mm diameter, boundary wire from any lawn robot manufacturer can be mounted Wheels: Lug tires 4.10" x 10" Weight: 36 kg Dimensions: 56 cm x 46 cm x 125 cm (Packing dimensions: 62 cm x 62 cm x 48 cm – 39 kg) *This item is the base unit without batteries & without charger! If you would like a complete set incl. 82V/5 Ah battery & charger, please order the item "PWM600MH-LI-SET". Single 82V/5Ah battery: PCA-0207 Suitable quick charger: PCA-0231 Boundary wire not included! Optional accessories may be required for some cable spools/cassettes. Warranty: Nedpfxo Adipke Angslh 1 year limited for commercial use 2 years for proven private purchase/use

Condition: new, Description The Solomat SIT 700 P2 is a powerful wood saw with a 2 m conveyor belt, ideal for wood with a diameter of up to 220 mm and a maximum wood length of 150 cm. It allows tool-free adjustment of the cutting lengths from 20 to 52 cm with intermediate steps and features an angled tilting lever (approx. 40°) for optimal comfort. An automatic wood feed and an emergency stop lever ensure safety during PTO operation. The movable arm holds the wood in position during sawing. A special carbide-tipped saw blade and a practical wood storage shelf are new additions. The machine can be easily transported using a 3-point linkage of category I and II or by forklift. - For wood diameters up to 220 mm, max. wood length 150 cm Nlsdpfxs Adi Rhe Angjh - Tool-free adjustment of cutting lengths: 20-52 cm (+ intermediate steps) - Angled lever tilted approximately 40° - Automatic wood feed - Movable arm holds the wood during sawing - Emergency stop lever for PTO operation - Incl. special carbide-tipped saw blade, 700x30x5.0x4.0 mm, 72 teeth - Incl. practical wood storage shelf, 3-point linkage Cat. I and II - Forklift attachment Max. discharge height with 2 m conveyor belt (m): 1.45 Wood diameter min. / max. (mm): 50 / 220 Drive: PTO drive Saw blade carbide-tipped Ø 700/30 x 5.0/4.0 mm, 42 teeth: Standard

Condition: new, The PLY 270/5 polyp grab from ICM is a powerful hydraulic grab for material handling, scrap metal, and recycling. It can be used in a variety of applications, such as recycling, scrap handling, waste management, and landscaping. The grab teeth made of highly wear-resistant Hardox 450 ensure reliable gripping force and a long service life. The rotary motor is integrated and protected in the grab head, while the innovative distributor block prevents oil leaks and ensures low-maintenance, long-lasting operation. - Professional polyp grabs for material handling, scrap metal, and recycling - Polyp grabs are versatile and can be used in a variety of applications, such as recycling, scrap handling, waste management, and landscaping. - Teeth made of wear-resistant Hardox 450 - Rotary motor integrated and protected in the head - Integrated, innovative distributor block – prevents oil leaks caused by cracks, as can occur in conventional systems A mm: 1000 C mm: 1670 B mm: 1550 Number of fingers: 5 Max. pressure bar: 300 Capacity liters (kg): 270 (2500) D mm: 900 Gripping force daN: 1185 Nledps Adihaefx Angsh Excavator class: 8–10 t E mm: 700

Condition: new, The PLY 320/5 multi-grapple from ICM is a powerful hydraulic grapple for handling materials, scrap metal, and recycling. It is versatile and can be used in various applications, such as recycling, scrap metal handling, waste management, and landscaping. The grapple tines made of highly wear-resistant Hardox 450 ensure reliable gripping force and a long service life. The rotary motor is integrated and protected within the grapple head, while the innovative distributor block prevents oil leaks and ensures low-maintenance operation. - Professional multi-grapples for material handling, scrap metal, and recycling - PLY multi-grapples are versatile and can be used in various applications – e.g., in recycling, scrap metal handling, waste management, and landscaping. - Tines made of wear-resistant Hardox 450 - Rotary motor integrated and protected in the head - Integrated, innovative distributor block – prevents oil leaks caused by cracks, as can occur with conventional systems. D mm: 900 A mm: 1070 Number of tines: 5 Nedpfj Adihtox Angolh E mm: 700 Excavator class: 10–13 t Gripping force daN: 1620 Capacity liters (kg): 320 (3000) B mm: 1655 C mm: 1780 Max. pressure bar: 300

Condition: new, Description The chassis is designed specifically for smaller tractors or towing vehicles without a 3-point linkage that cannot support the weight of the drum saw. It allows for a maximum speed of 25 km/h, but without road approval. Equipped with a towing hitch for the tractor and a lighting system, the chassis also offers a hydraulic lowering and lifting function via the tractor's onboard hydraulics. Weighing approximately 280 kg, the chassis measures 306 x 214 x 289 cm in the transport position and 312 x 214 x 242 cm in the working position. When ordered together with a drum saw, the chassis can be delivered fully assembled upon request. It is also suitable for retrofitting existing Quatromat and Triomat drum saws. Nodpfx As Adiiqjngelh When ordering, it is important to specify the serial number of the drum saw. The images show the chassis mounted on a drum saw; the delivery is without the drum saw. - Auxiliary chassis for smaller tractors/towing vehicles without a 3-point linkage, or those that cannot support the weight of the drum saw! - Max. permissible speed 25 km/h - No road approval!!! - Towing hitch for tractor - Incl. lighting system - Hydraulically lowerable / liftable via the tractor's onboard hydraulics - Dimensions with drum saw in transport position: 306 x 214 x 289 cm - Dimensions with drum saw in working position: 312 x 214 x 242 cm - When ordered together with a drum saw, the chassis can be delivered fully assembled on the saw upon request. - Also suitable for retrofitting to existing Quatromat/Triomat drum saws - Images show the chassis mounted on a drum saw. Delivery without drum saw! ATTENTION: When ordering, be sure to specify the serial number of the drum saw! When ordering together with a drum saw, the delivery can be provided fully assembled upon request. (may result in a longer delivery time)

Condition: new, The PLY-W 120/5 from ICM is a compact, specially designed multi-purpose grapple for the efficient handling of split or chipped wood. The five grapple fingers ensure optimal load retention, minimize material loss, and enable precise lifting and placement of the wood pieces. The robust construction guarantees a long service life and low-maintenance continuous operation. The grapple is ideal for applications in wood processing and for handling firewood, especially in confined work areas or with smaller machines. - Special grapple for split wood - The PLY-W multi-purpose grapples were specifically developed for handling split or chipped wood. - Five fingers ensure optimal load retention and minimize material loss - Ideal for applications in wood processing and for handling firewood Gripping force daN: 595 E mm: 1570 A mm: 750 Nlodpfe Adiflox Angsh D mm: 810 Max. operating pressure bar: 250 Capacity liters (kg): 120 (1000) C mm: 530 Number of fingers: 5 B mm: 1420 Excavator class: 1-4 t

Condition: new, The PLY-W 420/5 from ICM is a specially designed multi-grip grapple for the efficient handling of split or chipped wood. The five grapple fingers ensure a secure hold on the load, minimize material losses, and enable precise picking up and placing of the wood pieces. The robust construction guarantees durability and low-maintenance, continuous operation. The grapple is ideal for applications in wood processing and the handling of firewood, both on excavators and truck-mounted cranes. - Special grapple for split wood - The PLY-W multi-grip grapples were specially developed for handling split or chipped wood. - Five fingers ensure optimal holding of the load and minimize material losses - Ideal for applications in wood processing and the handling of firewood Excavator class: 7-10 t Capacity (kg): 420 (2500) E mm: 2500 B mm: 2300 Max. operating pressure bar: 250 Nsdo Adifxspfx Angolh D mm: 1280 Gripping force daN: 745 C mm: 725 A mm: 1150 Number of fingers: 5

Condition: new, The PLY 210/5 polyp grab from ICM is a powerful hydraulic grab for material handling, scrap metal, and recycling. It can be used in a variety of applications, such as recycling, scrap handling, waste management, and landscaping. The grab teeth made of high-wear-resistant Hardox 450 ensure reliable gripping force and a long service life. The rotary motor is protected and integrated into the grab head, while the innovative distributor block prevents oil leaks and ensures low-maintenance operation. - Professional polyp grabs for material handling, scrap metal, and recycling - Polyp grabs can be used in a variety of applications – for example, in recycling, scrap handling, waste management, and landscaping. - Teeth made of wear-resistant Hardox 450 - Rotary motor protected and integrated into the head - Integrated, innovative distributor block – prevents oil leaks caused by cracks, as with conventional systems C mm: 1520 Capacity l (kg): 210 (2000) Excavator class: 6-8 t Max. pressure bar: 300 Number of fingers: 5 Nlodpfx As Adig Aengjh Gripping force daN: 1315 D mm: 800 B mm: 1370 A mm: 965 E mm: 660

Condition: new, Description The RP-200HPC vibration plate is the ideal tool for effective subsoil compaction and for compacting small to medium-sized areas. It is particularly useful in gardening and landscaping, for the construction of walkways and patios, as well as for paving, foundation work, trenching and pipe laying, and for compacting paving stones. Njdpfx Ae Adi Akjngjlh The RP-200HPC features stepless adjustment of the movement in both directions, enabling flexible handling. The robust and durable baseplate ensures particularly precise work. Two base plate sizes are available depending on the application. In addition, the machine is equipped with an all-round protected V-belt, a compact protective frame, a wheel kit and a rubber mat, which further facilitate its use. Helpful accessories are also available for the RP-200HPC, including a transparent replacement rubber mat (. 5G3RP160HPC / EAN: 4047424003220) and a replacement wheel kit (. 5RRP160HPC / EAN: 4047424003237). Equipment features - The vibration plate with forward and reverse movement is the ideal tool for subsoil compaction, as well as for compacting small to medium-sized areas. Particularly suitable for use in gardening and landscaping, for the construction of walkways and patios, for paving, foundation work, trenching and pipe laying, and also for compacting paving stones. - Stepless adjustment of the movement in both directions. - Robust, durable baseplate for particularly precise work. - Two base plate sizes according to the application. - Equipped with an all-round protected V-belt, compact protective frame and rubber mat. - Polyurethane plate, wheel kit included! Max. advance rate: 20 - 25 m² / min. Centrifugal force: 30.5 kN Area performance: approx. 450 m² / hour Vibration strokes: 4,810 vpm Engine / drive: 1-cylinder 4-stroke OHV engine Fuel capacity: 6.0 l Frequency: 67 Hz Plate size (L x W): approx. 700 x 360 mm Attachment plates (L x W): 700 x 60 mm each Packaging dimensions (L x W x H): 775 x 430 x 1120 mm Engine power: 6.0 kW Max. permissible inclination of the engine: 20 ° Sound power level LWA: 108 dB (A) Displacement: 270 cm³ Compaction depth: 50 cm

Condition: new, COMMERCIAL APPLICATION, FOR PROFESSIONAL CABLE INSTALLERS The cable laying machine can lay up to 600 meters of wire per hour. Its revolutionary design offers high productivity and profitability! Due to its small size and weight, it can be easily transported from one location to another! Thanks to its maneuverability, it is able to lay wire from all robot manufacturers. With its tight turning radius, the PWM600MH lays the cable even into corners. Its ergonomic, adjustable, and laterally pivoting multi-position handle allows the user to install the cable even under hedges, bushes, and low-hanging branches! The high level of operating comfort is complemented by the drive, powered by a 4-stroke engine from Honda. The PWM600MH cable laying machine was developed by professionals to shorten the user's working time through its numerous features. Boundary wire from almost all manufacturers can be attached to the machine using the various rollers and adapters. Thanks to the laying depth of 4 to 6 cm, the owner of a lawnmower robot does not have to worry about the cable being accidentally cut. The easy-to-change, hardened steel blade cuts into any type of soil, whether normal, compacted or stony. The sliding foot reduces dirt deposits on the blade and gearbox shaft and prevents tearing of the turf. These are just a few of the features of the PWM600MH, which is why it is the most efficient machine on the market! New 2020 Model NEW: Multi-Position ANTI-VIBRATION HANDLE - Vibration reduced by 40% NEW: CHEVRON lug tires - improved traction in wet conditions Mount for all common cable drums Hardened steel blade made of carbide steel, 6mm wide, can be used on both sides (PWMA-0008) Close-to-edge working - only 15 cm distance required Incl. spacer, adjustable from 15 to 45 cm Boundary cables up to 6 mm diameter Nljdo Adipdjpfx Angeh Engine: HONDA GXH-50 2.1 HP – 4-stroke Speed: up to 15 m/min Laying depth: 4 – 6 cm Infinitely adjustable, laterally offset handle Cable: Install cables from any manufacturer of lawnmower robots Wheels: Lug tires 4.10" x 10" Weight: 34.1 kg Dimensions: 56 cm x 46 cm x 125 cm (Package dimensions: 62 cm x 62 cm x 48 cm, 39 kg) Incl. 1x special blade made of carbide steel (PWMA-0008) Warranty: 1 year limited Engine: Warranty terms from Honda International

Condition: new, Description The VP16 Vogesenblitz log splitter offers an impressive splitting force of 16 tons and is powered by a power take-off shaft with a 45-liter pump. This compact splitter features a lowering cylinder for a transport height of only 1.90 m and is equipped with a three-point linkage of categories I and II. An easy-to-operate 2-hand safety switch, two splitting speeds, and a quick piston return guarantee safe and efficient operation. The ergonomically shaped splitting wedge, with a splitting blade length of 245 mm, is replaceable. The splitter complies with the EN609-1 standard and is also equipped with a hydraulic log lifter, a holder for a splitting maul and axe, brass guides, and a robust, full-steel base plate that is powder-coated. - 16 tons of splitting force - Power take-off drive, 45-liter pump - Compact splitter with a lowering cylinder (quick release) for a transport height of 1.90 m - Three-point linkage, category I and II - Easy-to-operate 2-hand safety switch - 2 splitting speeds - Quick piston return - Ergonomically shaped splitting wedge - Splitting blade length 245 mm - Replaceable splitting blade - Complies with EN609-1, including hydraulic log lifter - Holder for splitting maul & axe - Brass guides - Full-steel base plate - Powder-coated Hydraulic winch with remote control: - 20 m cable, Ø 6 mm - Cable speed approx. 0 - 0.5 m/sec - Pulling force up to approx. 600 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / Wind In / Wind Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor; including cable and plug - In case of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213 cm) Drive: Power take-off drive Splitting force (tons): 16 Piston return (cm/s): 16 Pump: Single Speed 2 (cm/s): 27.8 Dimensions (H x L x W cm) (*Working position - Transport position): 250-190 x 120 x 110 Pump output (L/min): 54 Opening width (cm): 108 Speed 1 (cm/s): 10.6 Tank capacity (L): 28 Njdo Adlgljpfx Angslh

Condition: new, Description The VP17 Vogesenblitz wood splitter offers a splitting force of 17 tons and is powered by the power take-off shaft. Equipped with a robust, quiet cast iron pump and compliant with the safety standard EN 609-1, it enables easy two-hand operation and offers two splitting speeds. With a maximum splitting length of 115 cm and a cylinder stroke of 105 cm, it can be lowered without tools. The standard, patented mechanical log lifter features an automatic locking mechanism. Other features include a full steel base plate, rapid piston return, an ergonomically shaped splitting wedge, and a replaceable splitting knife with a length of 265 mm. The wood splitter is equipped with a 9-position adjustable log clamp, brass guides with grease nipples, and a three-point linkage of categories I and II. Additionally, there are holders for an axe and a hatchet. The powder-coated surface ensures durability. Nlsdpo Adlgxefx Angoh - 17 tons splitting force - Power take-off drive - Cast iron pump, robust and quiet - Compliant with safety standard EN 609-1 - Easy and smooth two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter standard, with automatic locking - Full steel base plate with beveled edges - Rapid piston return - Ergonomically shaped splitting wedge - Splitting knife length 265 mm - Replaceable splitting knife - Left-hand control lever with 9-position adjustable log clamp and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage cat. I and II - Holder for axe & hatchet - Powder-coated Splitting force (tons): 17 Pump: Cast iron pump Speed 1 (cm/s): 11.8 Drive: Power take-off drive Tank capacity (L): 28 Dimensions (H x L x W cm) (*Working position - Transport position): 262-200* x 135 x 120 Pump output (L/min): 57 Piston return (cm/s): 17.6 Opening width (cm): 115 Speed 2 (cm/s): 27.9

Condition: new, Description The VP17 Vogesenblitz log splitter offers a splitting force of 17 tons and is powered via the power take-off shaft. It features a robust, quiet cast iron pump and complies with the safety standard EN 609-1. With a simple two-hand operation and two splitting speeds, it enables a maximum splitting length of 115 cm and a cylinder stroke of 105 cm, which can be lowered without tools. The standard patented mechanical log lifter with automatic locking, the rapid piston return, and the ergonomically designed splitting wedge enhance ease of operation. Other features include the replaceable splitting blade, the 9-way adjustable log clamp, a three-point linkage of categories I and II, and a powder coating for durability. Holders for an axe and hatchet are also provided. - 17 tons splitting force - Power take-off drive - Cast iron pump, robust and quiet - Complies with safety standard EN 609-1 - Simple and smooth two-hand operation - 2 splitting speeds - Splitting length 115 cm, cylinder stroke 105 cm, can be lowered without tools - Patented mechanical log lifter as standard, with automatic locking - Full steel base plate with beveled edges - Rapid piston return - Ergonomically designed splitting wedge - Splitting blade length 265 mm - Replaceable splitting blade - Left operating lever with 9-way adjustable log clamp and gas spring (for wood length from 77 cm and diameter from 8 cm) - Brass guide with grease nipples - Three-point linkage Cat. I and II - Holder for axe & hatchet - Powder coated Hydr. winch with remote control: - Pulling force approx. 600 kg - Cable speed up to 0.5 m/s - 20 m cable incl. cable hook with safety device - Cable diameter 6 mm - Weight 75 kg - Transmitter: with 3 AAA batteries; 1.5 Volt, 4 buttons (On / Off / Reel In / Reel Out), 64 different frequencies, weight 120 g - Receiver: 12 Volt DC from the tractor, incl. cable and 7-pole plug - In the event of a power failure, the valve can also be switched manually. (Overall height in transport position with winch ~213 cm) Speed 1 (cm/s): 11.8 Pump capacity (L/min): 57 Drive: Power take-off drive Opening width (cm): 115 Dimensions (H x L x W cm) (*Working position - Transport position): 262-200 x 135 x 120 Speed 2 (cm/s): 27.9 Piston return (cm/s): 17.6 Tank capacity (L): 28 Nedpfe Adlg Sjx Angslh Pump: Cast iron pump Splitting force (tons): 17

Condition: new, Description The Solomat-Auto SIT 700 P5A-SF is a powerful, EN 1870-6 certified automatic tilting saw with a special 700 mm carbide-tipped saw blade. It features a PTO drive with a slip clutch and a patented, 40° angled tilting mechanism for optimal cutting performance. The automatic wood feed and tilting motion are controlled by a high-quality limit switch, with manual activation possible via a button. The unit is equipped with a safety guard and requires a 12 V power supply from the tractor for operation. It also includes an adjustable length stop from 20 to 52 cm and a hydraulically pivoting 5 m conveyor belt (+/- 15°). - Automatic tilting saw according to safety standard EN1870-6 - NEW: Special carbide-tipped saw blade 700/30 x 5.0/4.0 mm, 72 teeth - PTO drive with slip clutch - Patented angled tilting mechanism, approx. 40° angle - Automatic wood feed - Automatic tilting motion via high-quality limit switch - Manual activation of the tilting mechanism possible via button - Incl. safety guard according to EN 1870-6 - 12 V power supply from the tractor required for PTO drive - Adjustable length stop from 20-52 cm Nlsdpfx Aj Adi R Isngeh - Hydraulically pivoting 5 m conveyor belt +/- 15°, hydraulically extendable Max. discharge height with 5 m conveyor belt (m): 3 Wood diameter min. / max. (mm): 50 / 220 Drive: PTO drive Saw blade carbide-tipped, Ø 700/30 x 5.0/4.0 mm, 42 teeth: Standard

Condition: new, Description Nsdpfx Aj Adi Slengslh The Solomat SIT 700 E5H is a semi-automatic tilting saw according to EN standard 1870-6, equipped with a carbide-tipped saw blade with a diameter of 700 mm and 42 teeth. It features a combined drive system consisting of a power take-off shaft with a slip clutch and a 7.5 kW electric motor (400 V). The patented, angled tilting mechanism has an inclination angle of approximately 40° and is hydraulically operated. In addition, the machine offers a 5 m long, hydraulically extendable conveyor belt for efficient material handling. - Semi-automatic tilting saw according to the safety standard EN 1870-6 - Carbide-tipped saw blade, Ø 700 mm, 42 teeth - Power take-off drive with slip clutch - Electric motor 7.5 kW, 400 V, Cekon plug 16 A - Patented, angled tilting mechanism, approx. 40° - Semi-automatic / hydraulic tilting mechanism - 5 m conveyor belt, hydraulically extendable Drive: Power take-off drive + electric motor Max. discharge height with 5 m conveyor belt (m): 3 Wood diameter min. / max. (mm): 50 / 220 Saw blade, carbide-tipped, Ø 700/30 x 5.0/4.0 mm, 42 teeth: Standard equipment

Condition: new, Description The Solomat-Auto SIT 700 PE5A is a powerful log saw with a 5 m long, rigid conveyor belt that can be extended hydraulically. It complies with the safety standard EN 1870-6 and is equipped with a special carbide-tipped saw blade (700/30 x 5.0/4.0 mm, 72 teeth). The combined drive system consists of a PTO shaft with a slip clutch and an electric motor with 7.5 kW (400 V). The patented, angled tilting arm is approximately 40° and enables automatic log feeding and automatic tilting movement via a high-quality contact switch. Manual activation of the tilting arm is also possible by pressing a button. The unit includes safety guards in accordance with EN 1870-6 and requires a 12 V power supply from the tractor when using PTO drive. In addition, an adjustable length stop of 20-52 cm is provided. - Automatic log saw complying with safety standard EN 1870-6 - Hydraulically extendable 5 m conveyor belt, rigid Nodpfx Aj Adi Sxsngolh - NEW: Special carbide-tipped saw blade 700/30 x 5.0/4.0 mm, 72 teeth - PTO drive with slip clutch + electric motor 7.5 kW, 400 V, Cekon plug 16 A - Patented, angled tilting arm, approximately 40° - Automatic log feeding - Automatic tilting movement via high-quality contact switch - Manual activation of the tilting arm possible by pressing a button - Incl. safety guards in accordance with EN 1870-6 - 12 V power supply from the tractor required for PTO drive - Adjustable length stop of 20-52 cm Saw blade, carbide-tipped, Ø 700/30 x 5.0/4.0 mm, 42 teeth: Standard Max. discharge height with 5 m conveyor belt (m): 3 Wood diameter min. / max. (mm): 50 / 220 Drive: PTO drive + electric motor

Condition: new, Description The Solomat SIT 700 E5H-SF is a semi-automatic tilting saw, designed in accordance with EN standard 1870 - 6. It features an HM saw blade with a diameter of 700 mm and 42 teeth, driven by an electric motor with 400 V/7.5 kW. The patented, angled tilting mechanism (approx. 40°) operates hydraulically and enables automatic wood feed. An adjustable length stop from 20 to 52 cm and a hydraulically pivoting 5 m conveyor belt that can be extended by +/- 15° complete the equipment. - Semi-automatic tilting saw, conforming to safety standard EN 1870 - 6 - HM saw blade, Ø 700 mm, 42 teeth - Drive via electric motor 400 V / 7.5 kW Nlodpfs Adi Tvsx Angjh - Patented angled tilting mechanism, approx. 40° - Hydraulic tilting mechanism - Automatic wood feed - Adjustable length stop, 20-52 cm - Hydraulically pivoting 5 m conveyor belt, +/- 15°, hydraulically extendable Saw blade HM-equipped, Ø 700/30 x 5.0/4.0 mm, 42 teeth: Standard Max. discharge height with 5 m conveyor belt (m): 3 Drive: Electric motor 400 V / 7.5 kW Wood diameter min. / max. (mm): 50 / 220