Used B+B Drying Facility for sale (43,271)

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Bdjdpfx Aezlivpsfwjg Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bdedpfevvkipsx Afwog

Condition: used, Year of construction: 2002, Drilling capacity: 25 mm, spindle mount: MK 3 Bsdpfjvvi Auox Afwedg Storage location: Nattheim

Condition: like new (used), designed for packaging food products on trays, fruit, veg, meat, fish, cheese, poultry to retain freshness and presentation, min pack dimensions 90mm L x 110mm W x 10mm H, max dimensions 200mm L x 300mm W x 160mm H, width of film 280mm - 550mm2004 Bedsd Dcyrjpfx Afwedg

Condition: new, ASCO C500 Parts. We have various parts for these machines, both new and used. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice. Bdodjzv Idmspfx Afwjg

Condition: used, mileage: 307,824 km, power: 300 kW (407.89 HP), first registration: 07/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 09/2026, color: white, gearing type: semi-automatic, emission class: euro5, Equipment: ABS, air conditioning, * Sun visor Bdodpfxozwypke Afwog * ABS * ASR * Radio * On-board computer * Cruise control * Air horns * Hill start assist * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Sunroof * Rear window * Driver's comfort seat * Seat heating * Longitudinal and transverse differential locks * AP axles * Steel bumper * Air dryer * Towing hitch * Foldable underbody protection * Digital tachograph * Exhaust behind the cab * Air intake on top * 16-speed * Suspension: leaf spring * Payload: 17740 * Parking brake: engine brake ----Superstructure: Liebherr concrete mixer HTM 904 L, capacity 9,000 liters, 500-liter water tank.----EEV Class 1 For sale to commercial businesses only. IN THE CASE OF EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our general terms and conditions (see imprint) form the basis of all purchase agreements, invoices, proforma invoices, orders, and sales discussions.

Condition: excellent (used), CNC CELL with AUTOMATIC panels handling for routering, boring, cutting and edge banding BIESSE Machine with a movable gantry (on the X-axis)–CNC with “bTouch” screen and “bPad” wireless console Software bSolid+bEdge, connection to SOPHIA, IoT (Industrial Internet of Things) platform N. 10 supports ATS (L = mm 1800), with automatic EPS (Electronic Positioning System) Automatic tool change system (Tools storage plate in X-axis / 16 positions) Useful working area (X - Y - Z) mm 6735 x 1650 x 245 (290) Useful working area (X - Y - Z) in edge banding mm 5780 x 1930 x 60 N. 2 Working areas - Vacuum pump (capacity m3/h 250) - Motorized carpet to evacuate wastes/chips 1st Y-axis)- 2 machining heads (upper) in 4 slots Slot 1 + Slot 2: N° 1 vertical HSK F63 electrospindle (13.2 kW) with C-axis (360°) and air blowers Automatic tool change system (Tools storage plate in Y-axis / 6 positions) N° 16 (or 20) independent vertical drilling spindles + N° 6 (or 8) independent horizontal drilling spindles N° 1 Circular Saw (grooving) 120mm diameter (on the X-axis) Slot 11 + Slot 12: N° 1 vertical spindle HSK F63 (13.2 kW) with C-axis (360°) and air blowers Bjdszxnphjpfx Afwsdg Automatic tool change system (Tools storage plate in Y-axis / 6 positions) N° 16 (or 20) independent vertical drilling spindles + N° 6 (or 8) independent horizontal drilling spindles N° 1 Circular Saw (grooving) 120mm diameter (on the X-axis) 2nd Y-axis - Edge Banding Unit - GU60C Glueing Unit (Hot Melt EVA glue) / Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (for 2+2 = 4 reels) 200312) automated panels loading +unloading, using a KUKA robot (moving along the X-axis)

Condition: new, Year of construction: 2009, operating hours: 3 h, Cold Jet Aero 80 – Machine for professional use. New price: €35,000. Excludes applicator nozzles and hoses. This machine is suitable for industrial cleaning, including large-scale projects. An advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most robust machines on the market and is in excellent condition. Cold Jet Aero 80 FP – Dry Ice Blasting Machine, complete with the following equipment: COLD JET Aero 80 FP (3 hours of operation) 1 x 20’ blasting hose 1 x air hose 1 x Coldjet applicator 2 x nozzles Bdedpoznnyxofx Afweg We have various new parts in stock for Cold Jet machines. This is one of the best machines in the world. It contains no electronics, which makes it reliable and cost-effective to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance of Cold Jet machines are also available. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Cold Jet Foot Switch Microclean Series. Eliminates the need for a handheld control switch. Allows the nozzle to be attached directly to the blasting hose for improved ergonomics. “Deadman style” safety foot pedal. We have various new parts in stock for Cold Jet machines. Bodszv Hx Nepfx Afwsdg

Condition: new, Cold Jet Foot Switch Eliminates the need for a handheld control switch. Allows the nozzle to be attached directly to the blast hose for improved ergonomics. Bodpfx Afezv Hx Ajwodg “Deadman” style safety foot pedal. We have various new parts in stock for Cold Jet machines.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 136 h, travel distance X-axis: 610 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 828 D SL, total height: 1,987 mm, total width: 1,720 mm, table width: 350 mm, table length: 710 mm, overall weight: 2,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,000 W, tool weight: 6,000 g, product length (max.): 1,880 mm, number of axes: 3, This 3-axis PreMill V 610 B was manufactured in 2019. It features an X-axis travel of 610 mm, Y-axis travel of 350 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 710 x 350 mm and a maximum workpiece weight of 350 kg. If you are looking to get high-quality machining capabilities, consider the PreMill V 610 B vertical machining centre we have for sale. Contact us for further details. Bdedpfx Aozn Urhsfwog - Distance Spindle Center to Table Surface: 100 - 560 mm- Max. Workpiece Weight: 350 kg- Rapid Traverse Speed (X/Y/Z): 12 m/min- Feed Speed: 10 m/min- Positioning Accuracy: +/- 0.008 mm- Repeatability: +/- 0.005 mm- Tool Changer Type: Carousel- Tool Storage Capacity: 16 slots- Max. Tool Diameter: 100 mm (150 mm without adjacent tools)- Max. Tool Length: 300 mm- Spindle Motor Power (100% ED): 7 kW- Feed Motor Power (X/Y/Z): 2.3 kW- Power Supply: 12 kVA- Compressed Air Supply: 6 bar- Coolant Tank Capacity: 100 L- additional features available: ShopMill, 3D Simulation, Auto Power Off, Rigid Tapping, Flat Guideways in X/Y/Z, Chip Conveyor (Screw type) with Chip Cart, Spindle Ring Flushing, Prepared for CTS (IKZ), Prepared for 4th Axis, Central Oil Lubrication, LED Signal Lamp & Workspace Light, Vice Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 12/2016, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, total length: 9,000 mm, total width: 2,480 mm, total height: 3,900 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 6,750 mm, Year of construction: 2016, General information Model year: 2026 Axle configuration Tyre size: 385 / 55 / R22.5 Bodpfx Afezv I Apswedg Make axles: BPW Brakes: disc brakes Suspension: air suspension Middle axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Middle axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 3.150 kg Carrying capacity: 14.850 kg GVW: 18.000 kg Functional Make of bodywork: Booi Carrosserie Plywood BDF Box History Number of owners: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), SAT heating cabinet, oven, drying cabinet, up to 185 °C Bdjdpjzwddrofx Afwjg Interior dimensions: depth 1.75 m, width 2.10 m, height 2.28 m.

Condition: good (used), Offer 26117 Technical data: - Worktop, approx. dimensions: W 2000 x D 700 mm - Worktop thickness, approx.: 45 mm - Working height, approx.: 850 mm - 2 pcs. drawers on roller bearings - Drawer extension, approx.: 80% Bdodpfxezkg E Eo Afwjg - Drawer dimensions, approx.: W 500 x D 500 x H 150 mm - 2 cabinets with doors - Space required, approx.: W 2000 x D 700 x H 850 mm - Weight, approx.: 100 kg

Condition: used, empty load weight: 4,800 kg, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2011, next inspection (TÜV): 02/2027, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 800 mm, suspension: air, tire size: 385/65R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, steel body, side tipping mechanism on the left, 2 axles, tandem, air suspension, ABS (anti-lock braking system), underrun protection, front support. Body: Tandem 3-sided tipping trailer with side tipping mechanism on the left, 2 x 9-ton axles, drum brakes! Bdsdszna Sajpfx Afwog All information is provided without guarantee as the trailer is currently en route! The trailer can be inspected at Robert-Bosch-Strasse 22, 72186 Empfingen! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, brakes: retarder, color: white, gearing type: automatic, number of seats: 29, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 x new Iveco Daily vehicles with COC certificate, available for immediate delivery, equipped with GSR 3 systems. 1 x in black 1 x in white We are the representative of Ferqui in Germany. Ferqui is known for its high-quality fiberglass bodies. Ferqui has been using fiberglass since the late 1960s, making it one of the pioneers in this segment. The vehicles have a permissible total weight of 7200 kg and are therefore covered by the Iveco warranty. Iveco C70 chassis with automatic transmission and 210 hp Air-suspended rear axle, Telma auxiliary brake, LED headlights, auxiliary heater, driver's luxury seat with seat heating - Iveco Daily - 2 x touring buses on Iveco C70 chassis - Air-suspended rear axle - Telma - Length 8.59 meters, width 2.50 meters, height 3.1 meters - Fiberglass body - Framework construction made of galvanized steel - Front air conditioning - Webasto air conditioning in the passenger compartment RT 190 = 19 kW (thus dual/AC) - Double glazing - Panoramic windshield - Electric front door with recessed entry - Entry height at the front, without lowering, maximum 300 mm - Rear emergency door - Total capacity for the touring bus: 29 (28+1+1) - USB ports at each row of seats in the touring bus - Luggage compartment on the left and right in the touring bus - Fresh air vents at each row of seats with service set - Convector heater - Iveco auxiliary heater with water and timer Touring bus has a 4.2 m3 luggage compartment - Rear luggage compartment - Spare wheel compartment - 2 side luggage compartments - Exterior color: white Price per unit: 169,990.00 Euro Net export possible. Bdedpfxszxa I Ae Afweg

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,500 rpm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This HWACHEON CUTEX 160 B VDI features a swing over bed of 550 mm and a maximum spindle speed of 4500 rpm. It offers travels of 170 mm in the X-axis and 335 mm in the Z-axis, along with 12 tool positions. If you are looking to get high-quality turning capabilities, consider the HWACHEON CUTEX 160 B VDI machine we have for sale. Contact us for further details. • Swing over bed 550 mm • Maximum spindle speed 4500 rpm • Travels x-170 mm, z-335 mm • 12 tool positions Bdodpozwxz Ssfx Afwog Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), functionality: fully functional, mileage: 990,000 km, power: 279 kW (379.33 HP), first registration: 03/2000, fuel type: diesel, number of seats: 55, emission class: euro2, color: white, brakes: engine braking, suspension: air, Year of construction: 2000, Equipment: ABS, air conditioning, Touring Coach VOLVO B12-60/38, Barbi Echo R1, year 2000, Volvo engine, 6 cylinders, power 380 HP (279 kW), manual gearbox, retarder, Euro 2, bus length 12,000 mm, width 2,500 mm, height approx. 3,500 mm, air suspension, 55 total seats + toilet, air conditioning, radio, electric mirrors and windows, mileage: 990,000 km. Good working condition, well maintained, ready for service. Bodpfexqgpkjx Afwsdg

Condition: excellent (used), ZACMI 40-Cup Rotary Telescopic Filler – Stainless Steel ZACMI automatic telescopic filler with 40 cups, designed for the volumetric filling of solid and particulate food products into containers within continuous industrial production lines. Manufactured by ZACMI, the machine features a rotary telescopic filling system with 40 dosing cups, enabling the automatic and continuous feeding, dosing, and filling of the containers. This type of technology is particularly interesting for the canning industry, where a regular volumetric dosage of solid or particulate products is required, along with their proper introduction into cans or other rigid containers. Its construction, primarily in stainless steel, along with the rotary carousel and automatic transport systems, provides a robust solution for high-production industrial lines. MAIN FEATURES -Manufacturer: ZACMI -Type: Automatic telescopic filler -Number of dosing cups: 40 -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dosing -Automatic container handling -Continuous container input and output -Integrated conveyor -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling using a rotary system with 40 cups. The containers are automatically fed and transferred to the filling carousel. During the cycle, the dosing cups control the amount of product and transfer it into the container. Once filled, the containers automatically continue to the next stage of production. It can be integrated with: -Product feeding systems -Can feeders and conveyors -Liquid or brine dosing systems -Can sealers -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling and end-of-line equipment APPLICATIONS Especially suitable for canning industries and processors of vegetables, legumes, and other solid or particulate foods that require a high-capacity automatic filling system. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. The combination of 40 cups, rotary operation, and telescopic filling technology makes this ZACMI a particularly interesting solution for continuous production canning lines. Bodpfxszw Dbws Afwjdg Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, pressure: 12 bar, operating pressure: 12 bar, We offer this new Cryonomic Cob 71r cryogenic cleaning unit + abrasive set, manufactured in 2026. For sale: CRYONOMIC COB71R cryogenic cleaning machine, equipped with an abrasive module, in near-new condition. The machine has only been used for 5 hours and is still in excellent cosmetic and working condition. Bjdpfx Aoziiy Asfwsdg The COB71R is a high-performance, professional cryogenic cleaning machine, equipped with a remote control integrated into the gun, allowing direct adjustment of the dry ice flow rate, air pressure, and lighting. Thanks to its 30 kg hopper and a working pressure of up to 12 bar, it is perfectly suited for industrial cleaning, maintenance, restoration, stripping, and surface preparation. The abrasive module also allows for more demanding stripping operations (rust, paint, graffiti, etc.). Included equipment: CRYONOMIC COB71R machine Original abrasive module Gun with remote control Original hose and accessory set Documentation and invoice (if available) Condition: Only 5 hours of use Impeccable operation Machine ready for work Reason for sale: This machine was purchased to develop a new business activity, but it ultimately does not align with my field of activity. This is the sole reason for the sale. Additional photos can be provided upon request. Price: to be determined / negotiable. Purchase price: €35,828.1 (including VAT).

Condition: used, Year of construction: 2005, overall weight: 7,400 kg, FANUC Series 18i-TB control system, IEMCA AUTOMATA 2.5 robot loader – year 2010. Bdedpfx Afozxr Izswjg AVAILABLE FROM NOVEMBER 2026.

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Bodpfx Aezxr Dcofwsdg Workholding fixtures and tools not included. AVAILABLE: November 2026

Condition: used, Year of construction: 2013, overall weight: 5,000 kg, FANUC Series 32i-MODEL B control unit, with TOP AUTOMAZIONI XF365 linear guide. Workholding devices and tools not included. Bdsdpfxjzxrz Uj Afweg AVAILABLE: November 2026

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Bdedey R I Tmjpfx Afwjg Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm Bjdpfx Afslilfbowjdg No. of slits/strip thickness: 25/0,5 mm coil weight: max. 1 t