Used Barrel Tilter for sale (229)

Condition: new, machine/vehicle number: f80f2330e1318ef03bc20755e, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, saddle plate with replaceable 2 kingpins, only 2 longitudinal beams as double T-beams for retrofitting connecting gallows at the front in new/current design, outer frame slightly slanted with load-lock profile for attaching tension beltsNote! to attach the belts in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, wheel chocks with holder, aluminium side bumper, foldable, galvanized steel underride guard, extendable, half-shell mudguards!!! enclosed loose, not mounted!!!, with anti-spray flaps behind each axle, 1 plastic water barrel, capacity approx. 30l, in FR left BPW disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction of tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, can also be lowered manually, can be operated with a hand button on the vehicle 2-line compressed air brake system, with 1 air reservoir central standard, spring-loaded parking brake, 2 interchangeable coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module laid to the outside, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, control unit + brake integrated in frame as with tipper semi-trailer, mounted in front of the axles Brake pad wear indicator for disc brakes via ABS/EBS lamp Truck 385/65 R22.5 Continental tires, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the side as for tipper semi-trailer, dimension 3000 mm must be observed, 2 white LED position lights at the front, loose, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Nledpfxsi Riwqo Akueb Germany, test approval according to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double license plate holder single-line1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strips according to ECE R 048, Frame: DB 7350 nova gray, support legs: black coated Available immediately!

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: Nodpfx Ajw S Ewqskuelb • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 000247, GLUE MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE. SPECIAL FOR GLUING LAMELLAS OF LAMINATED BEAMS • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm and controlled by solenoid valve • Glue cord pitch: 10 mm • Tray with non-stick liquid that automatically closes the combs when the machine does not dose • Glue dosage: 100 to 200 gr/m2, as determined • Gear metering pump • Glue viscosity range: 10.000 to 30.000 mPas • Drag speed: 7 to 15 m/min Nedpfxot Nfare Akuolb • Support for 200 l barrel • PLC control, with touch screen. KINCO brand • Machine from the GLUESTREAM company • CE rules • Machine manufactured in 2021 and assembled in May 2022. Like new, it has worked less than 50 hours WE ALSO HAVE THE HYDRAULIC PRESS TO MAKE GLULAM BEAMS, ALMOST NEW MACHINE

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings -Condition: unused -Outer diameter: 260 mm Nsdpsb A Ia Refx Akujlb -Inner diameter: 170 mm -Width: 42 mm -NO SALES BY WEIGHT

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft Pre-shredder / Rotary Shear – Metal Shredder – 264 kW – 1,930 h Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine Type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: ____ Operating hours: 1,930 h Condition: Used Technical Specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Knives: Bolt-on (knives / cutters) Nledpfsx I Dc Esx Akujb Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation system Weight: approx. 27,500 kg Applications / Materials Light scrap Steel sheets Drums / barrels Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Fully functional machine Knives need replacing Regularly serviced Inspection and testing possible on site Sales conditions & pricing 🔧 Option 1 – Sold as-is (work required) Availability: immediate Price: €250,000 net ✅ Option 2 – Sold ready-to-use (fully serviced) Knives replaced General inspection and refurbishment Availability: lead time after order Price: €310,000 net

Condition: new, Dynamic Hard-bearing Balancing Machines of the 9D716 series have originally been designed to meet the needs of a wide range of customers. They are undoubtedly the best solution if you need to balance a wide range of rotor types, weights and sizes. This has led to their use in a wide range of industries. The machines have many unique technical solutions that allow you to set up and balance complex rotors in the shortest possible time without losing the accuracy of the unbalance detection. MACHINE HIGHLIGHTS • The specially designed rollers use advanced patented Exact Barrel grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced and the rotor to be centred during machine set-up. • The unique "Micro-Tuning" technology eliminates the effects of axial slippage during rotation. • The belt drive has a patented "long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. Njdpon Hwqvsfx Akuelb MACHINE DESIGN OPTIONS • Axial drive that uses a cardan shaft. Capable of transmitting high torque from the electric motor to the rotor. This type of drive is used for parts with high aerodynamic resistance or special design features (e.g. augers). • Drilling module for unbalance correction of the rotor without removing it from the machine. Convenient to use to increase the productivity of the operation. • Extended machine bed. The base of the machine can be made for any length of rotor. In our practice we have had machines for rotors of 12 metres in length. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • World-leading functionality and accuracy. SPECIFICATIONS Weight range of balanced rotors 5 - 500 kg Maximum rotor diameter (above the bedding) 1300 mm Diameter of rotor support journals 30 - 180 mm Distance between centres of rotor support journals 200 – 2000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 4.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz

Condition: new, The 9D717 balancing machine is a versatile and reliable tool for balancing a wide range of rotors from 15 to 1500 kg. This machine is capable of balancing different types of rotors, including inboard and outboard cantilever rotors, rotors on special mandrels and rotors in their own bearings. The machine's design is simple yet functional, allowing it to easily balance armatures, generator rotors, impellers and fan wheels, even with large initial imbalances. In addition, the machine can balance rotors in their own bearings, saving repair time and preventing damage to the rotor trunnions. It is suitable for determining and eliminating unbalance on rotors of electric motors, metallurgical gears, screws and printing equipment. The 9D717 balancing machine is also capable of balancing disc-type parts such as impellers and smoke pump impellers, as well as correcting unbalance on shaft-type parts such as threshing drums and combine rotors. Overall, this machine is highly versatile and effective in balancing various types of rotors, making it ideal for repair and production shops. HIGHLIGHTS • The specially designed rollers use advanced patented “Exact Barrel” grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced. • The belt drive has a patented "Long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. SPECIFICATIONS Weight range of balanced rotors 15 - 1500 kg Maximum rotor diameter (above the bedding) 1800 mm Distance between centres of rotor supports 360 – 3000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 7.5 kW Parameters of the supply network 380V, 3 Ph, 50Hz Njdjpdpn Uopfx Akuolb Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Nlodpod N Erpofx Akujb Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: not inspected (used), DÜRR Type: DÜRR 1C gluing system Dürr 1C gluing machine with drum pump, dosing unit and heated hose (approx. 5m). Technical description of the machine: Condition of the system Nledpfxsrdyb Ae Akueb Barrel pump, delivery hoses, dosing unit etc. are contaminated with old glue and must be cleaned or replaced. and must be cleaned or replaced. The machine has approx. 20 operating hours. Machine was used in a research facility. Year of construction 2017 Air inlet pressure max 6 bar Dimensions: approx. 1.5x1x1.5 meters 1 DÜRR adhesive control unit (110017040) 1 single barrel pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 96 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 153 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 50 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 9,83 x 2,90 x 2,80 m Total machine weight 43170 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR300 X: 1200 mm, servo Y: 1000/1000 mm, servo Z: 3500 mm, servo C: 0 - 90° - Conveyor - saftey guard Nljdjx Hzzcjpfx Akujb Additional options: - 1 x air valve - 6 x pneumatic sequentional valves - 12 hotrunner controller - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate

Condition: new, bore capacity in steel (diameter) 30 mm throat 250 mm bore stroke 130 mm spindle taper MT 3 MK table: 380 x 380 mm column diameter 98 mm turning speeds 75 - 3200 U/min feeds mm/U total power requirement 1,1 kW weight of the machine ca. 220 kg. range L-W-H 0,5 x 0,6 x 2,05 mm Gear drill Nedpou Imc Hsfx Akuslb Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1520 x 1470 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 675 mm Max. daylight 1825 mm Hydraulic ejector - stroke 135 mm Ejector force 226 kN Nodpsv Stbmsfx Akuslb Injection unit: Screw diameter 70 mm Ls/D ratio 23 Injection pressure 2389 bar Stroke volume 1097 ccm Shot weight (PS) 998 gr. Injection rate 393 ccm/s Screw speed 218 1/min Plasticising rate max. 83 g/s Nozzle pressure 173 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 75 kW Installed heating capacity 36 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,70 x 2,90 x 2,80 m Total machine weight 44000 kg Accessories: - Anti vibration pads Additional options: - 1 x air valve - 8 x pneumatic sequentional valves - Accumulator - 2 x hydr. core pulls on movable plate - 2 x hydr. core pulls on fix plate - Robot interface according to EUROMAP 67

Condition: new, functionality: fully functional, empty load weight: 890 kg, maximum load weight: 510 kg, overall weight: 1,400 kg, loading space length: 3,900 mm, loading space width: 1,880 mm, loading space height: 2,110 mm, PRODUCT INFORMATION "ANSSEMS PTS 1400 CONSTRUCTION TRAILER 390X188CM WITH STORAGE ROOM AND TOILET" Car trailer as a construction trailer from Anssems. This recreation trailer is suitable for all seasons. The insulated sandwich construction keeps out heat and cold. The electric heating provides additional support in winter. A crew trailer can be used on any construction site. Getting to the construction site is even easier with a car trailer like this, as it can be driven behind almost any car. It can also be used as an office trailer. Our construction trailers come standard with an entry door with a personal lock, a storage room with a door, a toilet with a separate room and door, fixed steps at the front and rear, a white sandwich construction, a round gray barrel roof, a 230V fuse box with residual current device, a switch, and an interior light, two windows with safety covers, four sturdy crank supports, a 230V power socket, a sturdy frame, and a galvanized V-drawbar. Accessories for construction trailers include a power cable, 100 km/h shock absorbers, and an anti-theft device. -Interior dimensions LxWxH: approx. 390x188x211cm (storage area 98x188x211cm / recreation room 292x188x211cm) ----- You can also get: · Financing Nljdpfx Akowbquboujb · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Condition: new, Year of construction: 2008, Cylinder barrel: 3201-303-35-- D60 LD20 Nlsdpfx Akjd A Nq Seueb Screw: 0463-08D60 LD20 G1.2 WS8 2781089 Aggregate size 1300 Year of manufacture 2008 New

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Njdpfex Thzpsx Akuslb Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: like new (used), screw diameter: 82 mm, Screw assembly (plasticizing unit) in 82mm Suitable for: DEMAG D430-2350 NC II + NC III machines DEMAG D400-2800 NC III DEMAG D500-2800 NC III Shot weight: 1390g = 1560ccm (D430-2350 NC II & NC III) Shot weight: 1490g = 1670ccm (D400/D500-2800 NC III) The mounting block (cooling flange) must be transferred from the old cylinder. The screw and barrel are as new (dimensions are OK) Complete with RSP. Nlodjw A R H Tspfx Akuob

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Nljdpfxji Ab Une Akujb Technical data: - Barrel width 1 - 15 mm - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° - Drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg - transport case

Year of construction: 2014, condition: refurbished (used), machine/vehicle number: 714_0917, Robot palletizing system KEG barrels loading and depalletizing. Capacity of up to 120 / h loading and depalletizing. We have been operating these systems successfully for several years. Our KEG gripper can grap KEGs from 300-450mm (adjustable). Nodog N S Edepfx Akujlb The system is equipped with a protective housing and access control through a light curtain. PLC Controlled via Siemens S7 TIA Portal. Required space approx. 4500x3500mm. Optionally also a flow keg weigher, pallet labeler, automatic capsule application available from us. We would be happy to integrate your existing components into our system. We have the full KNOW HOW! Have references for several years. We also provide support after the purchase. Can be implemented at short notice, assembly, integration and commissioning from a single source.

Condition: new, Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 37 kW Rotor-width: 450 mm Working-width: 600 mm Rotor with 4 blade-rows 2 stator-blade rows Roller feed hopper Nlodpfx Akeckg Rfoueb Size reduction of film, hollow containers, barrels, boxes, pipes, profiles,...

Condition: new, Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 55 kW Rotor-width: 450 mm Nljdockg Raspfx Akusb Working-width: 1000 mm Rotor with 5 blade-rows 2 stator-blade rows Roller feed hopper size reduction of loose film, hollow containers, barrels, pipes, profiles,...

Condition: new, Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 75 kW Rotor-width: 600 mm Working-width: 1000 mm Rotor with 5 blade-rows 2 stator-blade rows Roller feed hopper Nlodpfxockg Nzj Akueb size reduction of loose film, hollow containers, pipes, profiles, barrels,...

Year of construction: 1996, condition: used, Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: 1996 drive: 37 kW Rotor-width: 300 mm Working-width: 800 mm Rotor with 3 blade-rows 2 stator-blade rows Roller feed hopper Size reduction of film, hollow containers, barrels, boxes, pipes, profiles,... Nedpfx Aof Rlbiekujlb

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: Nodpfevn D I Nex Akuolb +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] - Bar reel length : 3 [m] - Reel housing EQUIPMENT Nledouhaqnspfx Akuob - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - Hirth cylinder barrel locking - Bar feeder Iemca PRA40/33F

Condition: used, TECHNICAL DETAILS 8 spindles, bar capacity : 21 (round), 18 (hex.), 14 (square) [mm] - Spindle speed : 620-6 000 [rpm] - Production cycle : 1 to 50 [parts/min] - Standard voltage : 380 [V] 50 [Hz] - Bar reel length : 3 [m] - Reel housing EQUIPMENT - Standard cross slide pos. 1,2,3,4,5,6,7 and 8 - 1 Bar feed cam parts 60 [mm] - 1 Auxiliary camshaft drive - 1 Pick-up. 20 [mm] with lever - Hirth cylinder barrel locking Nsdpfx Asuhaqzekujlb - 8 cross slides, stroke 30 [mm], optional - Central slide, stroke 60 [mm] - Cutting oil tank with magnetic drum conveyor - Coolant pump capacity 150 [l/min] - Iemca PRA52/33F bar loader n°020651PA03, year 2006