Used Bavelloni Gemy V10 for sale (291)

Condition: ready for operation (used), Heidenhain UV 105 ID 344980-02. The listed costs only cover the repair analysis of your component, which you can send to us. Once your component has been inspected, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Iodpfey Nrk Hjx An Heif

Condition: ready for operation (used), Heidenhain UV 101B power supply unit Id. 317 559-13 SN:10084979, the item has been completely overhauled and comes with a 3-month warranty, used, normal signs of wear, 100% functional, delivery as per photos. Iijdpfsx Etipex An Hef

Condition: ready for operation (used), Heidenhain UV 105 ID. 344 980-13 SN13343360, professionally completely overhauled and tested with 3 months warranty, 100% fully functional, delivery contents as per photos, used, good condition, 100% fully functional, delivery contents as per photos. Iiodsx Eti Aspfx An Hsf

Condition: ready for operation (used), Heidenhain UV 101 ID 317559-11 The cost covers only the repair analysis of your component, which you can send to us. After inspection of your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. During the repair process, your component will be fully overhauled and comes with a 3-month warranty from us. Iodpfx Anjy Nrkao Heif

Condition: ready for operation (used), Heidenhain UV 105 ID 344980-12 The stated costs cover only the repair analysis of your component, which you can send to us. After our assessment, you will receive a quotation detailing the actual repair costs. Upon your authorization for the repair, the analysis costs will be waived. As part of the repair process, your component will be fully overhauled and will come with a 3-month warranty from us. Iijdpfx Asy Nrk Tjn Hef

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 105, part no. 344 980-02, SN: 11934821A, offered on an exchange basis (exchange service). The unit has been professionally overhauled, fully tested, and is supplied with a 3-month warranty. 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your returned defective core must not have any mechanical damage such as breakage, as these are not repairable. In the event of such damage, a surcharge of €400 including VAT will apply. Iisdpfx Anox Etkgj Hjf

Condition: ready for operation (used), Heidenhain UV 105 . 344 980-02 SN: 11934821A fully overhauled with 3 months warranty, professionally refurbished and tested with 3 months warranty, 100% functional, scope of delivery as per specification. Iodpsx Etktsfx An Hoif

Condition: ready for operation (used), Heidenhain UV 105 converter Id. 344 980-13 SN:12193676, the item has been overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, delivery as shown in the photos. Iiedpfx Anjx Etlke Hjf

Condition: ready for operation (used), GMN TSEV 100sau x 315-6009 spindle, serial number: R335461 + Perske KNA 71.20-2 D motor Y 400-400V~ 3200-4850 rpm 55-83.3 Hz serial number: 977121 / 16000008GC HF spindle TSE 100du x 315 4.4kW 5000rpm oil EX32, used, good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Iijdpfex Duaqox An Hsf

Condition: ready for operation (used), Siemens 6AV7861-3TB00-0AA0 Simatic Flat Panel 19" Touch Industrial Monitor, SN: LBV1004385-, Serial No. as per photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iiedpfx Aji Eddusn Hof

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 101B, part no. 317 559-13, SN: 10084979, offered in exchange (exchange service). The unit has been professionally overhauled and fully tested, with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return part must not show any mechanical damage, such as breakages, as these are not repairable. If such damage is present, an additional charge of €400 incl. VAT will apply. Isdpfox Etiiox An Hoif

Condition: ready for operation (used), Heidenhain UV 105 power supply ID 344 980-13 SN 12989796, professionally overhauled and tested, with 3 months warranty, good preserved condition, 100% functional, delivery as per photos. Iedpfx Ajx Etivon Hoif

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, color channels: 4, Equipment: auto duplex, documentation/manual, raster image processor, In this offer, you are purchasing a used Canon imagePRESS V1000 color production system. Item for Sale: 1 x Canon imagePRESS V1000 equipped with: Prismasync controller, complete with DocBox and Impose Staple Finisher AF1 Paper Deck E1 POD Deck XL A2 Stack Bypass Not the right configuration for your needs? No problem! We can customize the machine according to your requirements. Contact us! Meter Readings: Total: approx. 3,800,000 impressions Color: approx. 3,200,000 impressions Black: approx. 600,000 impressions Condition: This offer refers to a used device, which may show signs of wear Iodpfx Ajzghu Tsn Heif (such as minor scratches or discoloration). The machine has been fully tested and is in working condition. A test print can be seen in the photos. Packaging and Delivery: You are welcome to inspect the machine during our business hours. Please arrange an appointment in advance. Seaworthy export packaging and worldwide shipping can be arranged upon request. Before delivery or collection, a functional test will be documented on video for your reference. For further information, please do not hesitate to contact us directly. The stated price is exclusive of VAT.

Condition: used, mileage: 248,000 km, power: 110 kW (149.56 HP), first registration: 06/2006, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2026, color: red, gearing type: mechanical, emission class: euro2, number of seats: 2, Equipment: ABS, * Mercedes Benz 815 Atego chassis with trailer coupling and large cross member for Rockinger * Diesel – Displacement: 4,249 cc – 110 kW / 150 hp – Euro 2 – Red badge – TÜV valid until 10/2026 * Wheelbase: 3,000 mm – 2 seats – 6-speed manual gearbox – Auxiliary heater – Swivel ball coupling for trailers up to 3.5 t * Permissible total weight: 7,490 kg – Large cross member for Rockinger coupling * Vehicle available immediately and ready for collection – Vehicle is unbranded * Please arrange an appointment for viewing * Contact person: Mr. Andreas Vogel * The specifications provided online are non-binding descriptions. * They do not constitute guaranteed characteristics. Iiedpsxuypxofx An Hjf * The seller is not liable for typographical or data transmission errors. * Subject to change, error, and prior sale.

Condition: used, mileage: 248,000 km, power: 110 kW (149.56 HP), first registration: 06/2006, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2026, color: red, gearing type: mechanical, emission class: euro2, number of seats: 2, loading space length: 3,000 mm, loading space width: 2,300 mm, loading space height: 2,300 mm, Equipment: ABS, * Mercedes Benz 815 Atego with refrigerated box body & ThermoKing cooling unit & overhead rails * Diesel – Engine displacement: 4,249 cc – 110 kW / 150 hp – Euro 2 – Red emission sticker – MOT valid until 10/2026 * Body dimensions: Length 3.20 m x Width 2.30 m x Height 2.30 m – Wheelbase: 3,000 mm * 2 seats – 6-speed manual transmission – Auxiliary heater – Ball-head trailer hitch 3.5 t * Permissible total weight: 7,490 kg – Curb weight: 5,170 kg – Payload: 2,320 kg * Vehicle available immediately and ready for collection – No signage/decals on vehicle Iedpfx Anoxuyp Es Hsif * Please schedule an appointment for viewing * Contact person: Mr. Andreas Vogel * The information provided online is non-binding descriptions. * They do not constitute guaranteed characteristics. * The seller assumes no liability for typographical or data transmission errors. * Subject to alterations, errors, and prior sale.

Condition: used, travel distance X-axis: 1,016 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 12,000 rpm, X-AXIS TRAVEL: 1016 MM Y-AXIS TRAVEL: 610 MM Z-AXIS TRAVEL: 700 MM SPINDLE SPEED: 0 - 12,000 RPM TABLE DIMENSIONS: 1300 X 670 MM Iiodpfx Anoyb Ryvo Hjf MAXIMUM LOAD CAPACITY: 1200 KG SPINDLE MOTOR POWER: 21 KW WEIGHT: 10,500 KG DIMENSIONS: 4600 X 3600 X H 3300 MM CNC HEIDENHAIN iTNC 530 ATC 30 PLACES CHIP CONVEYOR INTERNAL AND EXTERNAL COOLANT

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Iedpfx Anefi Nmuo Hoif Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: used, B&R / 8V1 Acopos 1022 servo amplifier- refurbished - 3 months warranty: This is done exclusively by a manufacturer's inspection. The processing is carried out by Complast GmbH. - taken out of running machine - fully functionalmanufacturer: B&R type: 1022 Iiedpfsp Rb Iajx An Hjf manufacturer no.: 8V1Bitte achten Sie vor dem Kauf darauf, ob der von Ihnen benötigte Acopos ebenfalls einen 12-poligen grünen Stecker hat. If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: überholt

Condition: used, B&R Acopos 1090 servo drive 8V1 removed from Engel robot ERC-6510-E - removed from running machine - fully functional manufacturer: B&R type: 8V1090 manufacturer no.: 8V1 Iisdpeiyzwwsfx An Hjf spare part no.: Before purchasing, please check whether the Acopos you require also has an 12-pin green connector.  If the spare part is traded in as an exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: reconditioned (used), Year of construction: 2015, Refurbished BUSCH SECO SV 1040 C 000 INXX 1.25 kW motor P max = 120 hPa (mbar) V max = 40 m3/h Iedpfsw Sm A Iox An Hsif Weight approx. 40 kg

Condition: used, Year of construction: 2003, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 560 mm, Year of manufacture: 2003 CNC control: FANUC Series 18-M Machine weight: 6,000 kg Machine dimensions Length: 3,200 mm Width: 2,655 mm Height: 2,750 mm Spindle Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power: 11 kW Working capacity X-axis: 1,020 mm Y-axis: 550 mm Z-axis: 560 mm Distance spindle nose – table surface: 150 – 710 mm Distance spindle center – column: 600 mm Table Table dimensions: 1,250 × 650 mm Table load capacity: 1,000 kg Feed rates Rapid traverse X / Y / Z: 20,000 mm/min Working feed rate X / Y / Z: 1 – 10,000 mm/min Tool changer Tool holder: BT-40 Tool magazine: 24 positions Tool diameter: with adjacent tools: Ø90 mm with free position: Ø135 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Equipment Screw-type chip conveyor Coolant collection tank with washdown pump Spindle line air conditioner and transformer Machine manuals Electrical diagrams Iisdpfxoyt Rtao An Hof CE declaration

Year of construction: 2008, condition: excellent (used), machine/vehicle number: C0851000161, Equipment / Additional information: Ultimate pressure: 150 hPa(mbar) Iiodpjh Eu Sfofx An Hsf Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: used, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 620 mm control: YASNAC-J50M table-size: 1100 x 460 mm table load capacity: 800 kg tool taper: BT40 Revolution per minute: 30 - 10 000 U/min. spindle head: MAS / BT 40 distance spindle nose and table: 150 mm feed speeds infinitely variable: 8 m/min. rapid traverse:: x+y+z: 30+30+24 m/min tool changer with: 24 spindle hours: 1317 h operating hours - idle run: 7148 h air-pressure connection: ja bar total power requirement: 30 (kVA) Weight approx.: 5,0 t dimension machine xH: 2,9 x 2,5 x 2,85 m dimension swarf conveyor LxWxH: 3,0 x 0,9 x 1,3 m other technical characteristics: max. drill Ø 40mm Facing 245 cc/min (cc/min) Thread cutting up to M 36 Compressed air connection Equipment: Chip conveyor with cooling water tank Interior lighting Operation via swivelling control panel CTS Isdpfx Anou Idf Ee Hsif Machine feet Accessories: approx. 26 clamping spigots *

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min Ijdpfsvc Avbox An Hjif max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Year of construction: 1966, condition: good (used), Machine number: 6665/66 Type / Model: PEDV 10/II-S Pressing force: 10 t Table: 450 x 300 mm Ram: 190 x 140 mm Ram stroke: 6 to 50 mm Downward ram adjustment: 45 mm Upward table adjustment: 140 mm Die opening: 140 mm Overhang: 170 mm Maximum distance between table and ram: 320 mm Stroke rate: 160 /min Sheet metal thickness per stroke: 2 mm Sheet metal thickness for continuous stroke: 1 mm Connection: 1.2 kW Accessories/Equipment: Iedpsh Tktijfx An Hoif Condition: good Weight: 1.0 t Dimensions: 900 x 850 x 2,200 mm