Used Beckhoff Lightbus Combined Input/Output Module for sale (13,933)

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, digital output, electronic block, decentralized peripheral device -Manufacturer: Siemens, SIMATIC S7, Distributed I/O device from vertical lathe Scherer VDZ 80 DS -Type: ET 200L 6ES7 132-1BL00-0XB0 Dwodpfsxphu Sex Akmec -Additional terminal: 6ES7 193-1FL30-0XA0 -Number: 4x module available -Price: per piece -Dimensions each: 190/135/H75 mm -Weight: 0.8 kg/piece

Condition: used, with Tersa knife shaft used, good condition Dwsdpfxevwgh Re Akmec Make Müller Brugg Type DA 6 M Planing width approx. 610 mm Planing height approx. 220 mm Table length approx. 2200 mm Bridge protection Slotted table lips Low-noise table lips Number of knives 4 pieces Knife system - Tersa reversible knives Table sliding rollers Space required approx. 2300 mm x 1500 mm x 1100 mm Weight approx. 2000 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: good (used), Mains choke, mains filter, frequency converter, drive converter, transformer -Manufacturer: Siemens, mains filter mains choke Simodrive -2-phase choke 36KW: 6SN1111.0AA00-0CA -Mains filter: 6SN1111-0AA01-2CA0 -Adapter set: 6SN1162-0GA00-0CA0 Dsdpfxowcywbe Akmowc -Distribution/Price; complete -Dimensions: 580/250/H310 mm -Weight: 41.6 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative feedback module, monitoring module, UEB module INT/EXT. -Manufacturer: Siemens, SIMODRIVE 611 monitoring module -Type: 6SN1112-1AC01-0AA1 -Number: 2x module available Dwedpewc N Ivofx Akmjc -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 4.1 kg/piece

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Dwsdev Dah Dspfx Akmoc Technical data: - 3 system knife planer shaft - Planing width 410 mm - Planing length 1800 mm - Max. passage 230 mm - Motor power 4 kW / 5.4 HP - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1

Condition: good (used), Year of construction: 1995, functionality: fully functional, SCM Combination Planer/Thicknesser 2252 Year of manufacture: 1995 Manufacturer: SCM (Italy) S/N AB 44714 good condition, from a training facility Planing & thickness width 500–520 mm Planing table length     ~2000–2200 mm Cutterhead Ø 120 mm, 4 knives (HSS/TERSA) Motor power     5.5 kW (400 V) Thicknessing height   3 – ~235 mm Feed speed 5 – 17 m/min Table adjustment  manual (planing), electric with display (thicknessing) Extraction connection   Ø 120 mm The SCM 2252 is a robust combination machine ideal for craft applications. Cast iron tables, HSS cutterhead, stepless feed, motor-driven thicknessing table adjustment with display and mortising attachment make it a versatile work tool. Easy table adjustment for changing to thickness planing (spring assist) Planer part (planing function) Working width: approx. 500–520 mm Table length: about 2000–2200 mm Cutterhead: d = approx. 120 mm with 4 HSS knives Power: 5.5 kW (~7.5 HP) motor, 400 V Start: conventional "YA" start with motor brake Alignment & guidance: tiltable parallel fence (0° to 45°), mostly aluminum, length approx. 1100 × 170 mm Protection: Extraction hood (Ø approx. 120 mm) and CPS operator protection Tables: Cast iron tables, height adjustable manually Thickness planer part Working width: same range – 500–520 mm Height range: min. 3 mm to max. approx. 235–252 mm Table dimensions: approx. 500 × 930 mm to 550 × 320 mm implemented Table adjustment: electric, with display (e.g., SIKO, digital height display) Dwsdpfxowrcd Nj Akmsc Feed speeds: continuously adjustable between ~ 5 and 17 m/min or in steps like 7.5 / 15 m/min Extraction: usually also Ø 120 mm, often combined extraction option Machine features & dimensions Dimensions (L×W×H): around 2200 × 1000–1500 × 800–1000 mm Working height: approx. 800 mm Weight: 1050 kg

Condition: good (used), PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S5 Digital Input Digital Input 2 pieces with bus module -Type: 6ES5 421-8MA12 -Bus module: Siemens 6ES5 700-8MA11 -Number: 5x double module available -Price: per piece Dwsdpswpgmiefx Akmec -Dimensions: 165/100/H125 mm -Weight: 0.7 kg/piece

Condition: ready for operation (used), Siemens 6SL3120-1TE22-4AC0 Single Motor Module 24A Version: C SN:T-P56292315, in mint condition, never used, 100% functional, scope of delivery as shown in photos. Agreed sales discounts do not apply to this item. Please inquire for price separately! Dwsdpfjxag T Uox Akmec

Condition: new, Siemens 6SL3120-1TE22-4AD0 Single Motor Module SN T-P66092656, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Djdoxag Ulspfx Akmewc

Condition: ready for operation (used), Siemens 6SL3120-1TE24-5AC0 Single Motor Module 45A Version: C SN:T-P36206521, as good as new, never in use, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Dodpfx Ajxag Urokmowc

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Dwedpfsxlt Shox Akmoc Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: used, Nikmann FS 41N planer and thicknesser - Planing width: 41 cm Dsdpoya Drvefx Akmowc - Shaft with 4 knives - 2 table rollers - Motor with brake Machine in very good, excellent condition.

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module -Type: 80VD1 00PS.C02X-01 Dwodpfxjyhmx Is Akmjc -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Year of construction: 2012, condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, analog input module, sensor/actuator module, connection, electronic module, PLC module, expansion module, plug-in card circuit board, operator panel -Manufacturer: Fanuc, plug-in card circuit board from CNC machining center Santenberg GTC S 2 -Type: A20B-2002-052 MES-1A -Extension module: Type: A03B-0815-C001 4 pcs. Dwjdpfskahkyox Akmjc -Dimensions: 150/110/H30 mm -Weight: 0.2 kg

Condition: used, Interface module, PLC control Dsdjb Uhtkspfx Akmowc -Type: PAAS E70200 -Number: 9x available -Price: per package -Weight: 0.2 kg

Condition: used, PLC control, CPU module, central processing unit -Manufacturer: SIEMENS Dwjdpfx Ajcarz Nekmoc -Type: Simatic S5 6ES5 942-7UA11 -Number: 1x module available -Dimensions: 45/195/H300 mm -Weight: 1.1kg

Condition: good (used), PLC controller, expansion module, interface module Dwedpfecar Agsx Akmjc -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 305-7LA11 -Number: 1 module available -Dimensions: 50/135/H300 mm -Weight: 1.1 kg

Condition: good (used), Frequency converter, frequency converter, drive inverter, controller, variable speed drive -Siemens: Sinamics S120 Single Motor Module 6SL3120-1TE21-0AA3 -Max. Power kW Dwedpfx Akochk Idjmjc -Input: DC 600V -Output: 3AC 400V 9A -Quantity: 1 piece available -Dimensions: 500/50/H270 mm -Weight: 5.0kg

Condition: as good as new (ex-display), Year of construction: 2026, Combination 4-in-1 machine HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Beam length 2,250 mm Max. saw blade diameter 315 mm Max. cutting height at 90°/45° 103 / 82 mm Max. support width to the left of the saw blade 2,310 mm Cutting width with parallel guide 820 mm Saw blade tilt 90° - 45° - Jointer - Working width 300 mm Jointer table length 1,510 mm Cutterhead diameter / Number of cutter knives 72 mm / 3 pcs. - Thicknesser - Table dimensions 300 x 585 mm Min./max. working height 3 / 230 mm Max. material removal 4 mm Feed rate 7 m / min - Table Router - Usable spindle length 100 mm Max. tenon tool diameter 275 mm Max. tool diameter 210 mm Spindle speed 3,500 / 7,000 / 10,000 rpm Spindle diameter 30 mm - General - Dwsdpfx Aksci Tvhjmjc Motor power 400 V / 50 Hz, 3 x 5.0 kW (6.6 hp) Dust extraction port diameter 4 x 120 mm Dust extraction port diameter on saw blade guard 60 mm - Promotional Price - Location: In stock, 54634 Bitburg

Condition: good (used), Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB6032-G -Input: G 325 V DC -Output: G 375V DC 8.0A -Number: 2 modules available -Price: per piece -Dimensions: 215/150/H90 mm -Weight: 0.4 kg/pc. Dwsdpfxeltrfis Akmjc

Condition: good (used), Safety relay, safety controller, emergency stop switching device, switching device, safety sensor, safety switching device, expansion module -Manufacturer: pilz, safety relay safety switching device -Type: PNOZ mo4p -Number: 6x module available -Price per piece -Dimension: 100/35/H135 mm -Weight: 0.2 kg/pc. Dedponbhlqefx Akmowc

Condition: used, CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm Dwedpfxench Iio Akmec -Weight: 0.1 kg/pc.

Condition: ready for operation (used), Fanuc A06B-6077-H106 Power Supply Module SN EA5615355 the article was checked and tested! ,used, normal traces of use, 100% functional, scope of delivery according to photos Djdpsnkqywofx Akmewc

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 digital input electronic modules ET 200S Dwedpfxjmhmycs Akmjc -Electronics module: type 6ES7 132-4JB50-0AB0 -Terminal module: 6ES7 193-4CB30-0AA0 -Number: 4x module available -Price per piece -Dimensions: 130/20/H75 mm -Weight: 0.1 kg/pc

Condition: used, CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit card, analog distribution card, distribution board card, valve amplifier Dwodpog Tizxefx Akmec -Manufacturer: Bachmann, electronic module valve amplifier from Battenfeld injection molding machine -Type: CPPV 200 SB 7621/00 -Quantity: 1x module available -Price per piece -Dimensions: 125/85/H30 mm -Weight: 0.2 kg/pc.