Used Behringer Hbm 440 A for sale (69,038)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Dcodor Ttfljpfx Akujk Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Veneer edges limited possible up to max. 1.0 mm Panels thickness (min/max) 8 mm. 40 mm (with MFA) / 60 mm (without MFA) Numerical Control / Software ICOS Open Adjustable feeding speed (m/min ) 6 - 30 Top pressure system with driven rubber belt Spraying unit (Anti-sticking liquid) In-feed fence Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66) 0°-25° (max 30 m/min) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) by N.C. 08.342 (2 x Kw 0,66) servo Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617 (2 x Kw 0,25) Milling grooving unit 08.190 (1 x Kw 4,5)

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Dcsdjyxw Ddspfx Akusk Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: excellent (used), mileage: 184,731 km, power: 324 kW (440.52 HP), first registration: 01/2021, fuel type: diesel, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 500 l, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 9,600 mm, loading space height: 1,200 mm, Year of construction: 2021, Equipment: AdBlue, = Additional Options and Accessories = - PTO = Further Information = Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 13,230 kg Payload: 12,770 kg Gross vehicle weight: 26,000 kg Body brand: CVIM FRANCE OPRIJWAGEN/MACHINE TRANSPORTER/PLATFORM Load platform height: 120 cm Technical condition: very good Visual condition: very good RENAULT C 440 DTI 6X2 TRANSPORTER/MACHINE CARRIER/PLATFORM EURO 6 L PACKAGE 440 HP DRIVE 6X2, REAR AXLE LIFT AND STEERABLE WHEELBASE 560 CM AIR SUSPENSION DIFFERENTIAL LOCK DAY CAB FULL OPTIONS: AIR CONDITIONING, NAVIGATION, AUTOMATIC TRANSMISSION SMALL TRAILER COUPLING LOADING PLATFORM WITH HYDRAULICALLY MOVABLE REAR WITH HYDRAULICALLY EXTENDABLE RAMPS LENGTH 960 CM FLOOR HEIGHT APPROX. 120 CM LASHING EYES LARGE HYDRAULICALLY ADJUSTABLE RAMPS Dcsdpfx Aeyk Du Ejkuok LARGE WINCH WITH REMOTE CONTROL 2X REAR SUPPORTS TOOLBOXES COMPLETE BODY CONTROLLED BY REMOTE FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE OUR VIDEOS OF TRUCKS/COMMERCIAL VEHICLES AND MACHINES OFFERED FOR SALE WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: new, sheet width 2035 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° Dsdpfxoxaaahj Akueck daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: new, sheet width 2540 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 6275 kg dimensions of the machine ca. 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand Dsdpfxexaaz Ss Akujck - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: used, frequency 47-63 Hz total power requirement 18,5 kW dimensions of the machine ca. 0,52x0,28x0,25 m Artikel-Nr.: 6SE6440-2UE31-8DA1 MICROMASTER 440 without Filter 3 AC 500-600V +10/-10% 47-63Hz Konstantmoment Dcodpfjd Ihdbex Akusk 18,5 kW Overload 150% for 60 seconds, 200% for 3 seconds square moment 22 kW 520x275x245 (hxbxt)safety class IP20 environmental temperature -10+50°C e without OP/BOP

Condition: used, mileage: 691,743 km, power: 338 kW (459.55 HP), first registration: 10/2015, fuel type: diesel, empty load weight: 7,366 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2026, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, Manufacturer: Iveco - Type/Model: Magirus 440 4x2 - First registration: 08/10/2015 - Mileage: 691,743 km - Number of axles: 2 - Emissions class: Euro 6 - Brakes: disc - Length: 6,070 mm - Width: 2,550 mm - Height: 4,000 mm - Unladen weight: 7,366 kg - Next inspection (MOT): 01/2026 Dcedpfxjx Sxfce Akuok

Condition: used, mileage: 450,689 km, power: 324 kW (440.52 HP), axle configuration: 6x4, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, Year of construction: 2009, Equipment: ABS, EBS, = Additional options and accessories = - Brake system = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (by phone at ...). FM 64T B 440 6x4 tractor unit 2-circuit tipper hydraulics, retarder, electric windows, number of seats: 2, air-suspended seat, Bluetooth, radio, hands-free system, automatic transmission, cruise control, engine brake, hill start assist, ABS/ESP/ASR, sun visor, roof hatch, bed, heated exterior mirrors, electric exterior mirrors, differential lock, PTO, headlights: halogen, fog lights, additional headlights: FH front, beacon lights, air suspension on rear axle, permissible total weight: 26,000 kg, unladen weight: 9,940 kg, tire tread depth: 1st axle 8-9mm, 2nd axle 9-10mm, 3rd axle 8-9mm. Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone ...) will be happy to assist you. Further information is available on our website. ... Subject to errors, changes and prior sale! !!! ESP Cab: long-haul transport = Further information = Dcsdpfx Aeyfp D Iekusk Cab: High sleeper cab Engine displacement: 12,780 cc Gross vehicle weight: 26,000 kg For more information, please contact Tobias Ebert.

Condition: excellent (used), FULL LINE OF 4 SIDE SIZING-MILLING & EDGE BANDING Composed of the following machines: A) W06027 1st Double Side Sizing & Edgebander "IMA" Mod. Combima II / 440 /A / R3 Dcjdeun N Dljpfx Akuok B) Turning Station 90° C) W06028 2nd Double Side Sizing & Edgebander "IMA" Combima II / 190 / B / R3

Condition: excellent (used), PRO XS4 MANUAL ELECTROSTATIC AIRBRUSH SPRAY GUN GRACO REF. 244580 - Brand: GRACO - Reference: 244580 -PRO XS4, SMART, BOQ. 1,5 MM., 85KV. - For solvent-based paints. Dcsdpehydcqofx Akuek -General industry, metal, wood. -Hose not included - Second hand product totally revised. - VAT not included

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Dcjdevv Spkjpfx Akusk Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Danumeric 440 overhauled and digitized 2024 Machine version - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 Dcjdpfju Dg D Ajx Akuek constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns Data interfaces USB

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Dcsdpfx Aoxn A Spskusk Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, mileage: 123,000 km, fuel type: diesel, color: green, emission class: euro6, Equipment: ABS, differential lock, Iveco Stralis X-Way AT 440X46 T/P: Dodpfxswbvbgs Akuock - First registration: 2018 - Engine: 460 HP - Euro 6 - Approx. 123,000 km - Automatic transmission - Wheelbase: 3.65 m - ZF Intarder hydraulic retarder - Rear windowed cab, low roof - Rear air suspension Features: - Steel front bumper, differential lock, air conditioning, electric windows, electrically adjustable mirrors, ABS, ASR, air-suspended driver’s seat, sun visor, fog lights, cruise control, tilting sunroof, central locking, independent cab heating. Configuration: - Road tractor with hydraulic equipment / PTO (power take-off) The vehicle is available for viewing and testing at: PSL AUTOCARRI SRL Via degli Imprenditori, 45 (Ind. Zone) 37067 Valeggio sul Mincio (Verona) Tel. +39 045-7950955 Please contact us to schedule an appointment, in order to best organise access to our premises. For more information, technical clarifications, or to inquire about the vehicle’s sale price, please contact our sales managers directly at +39 0457950955. Note: The vehicle description is for information purposes only and may contain errors or inaccuracies. Interested parties are required to verify the exact specifications of the vehicle before purchase. PSL Autocarri Srl accepts no liability for possible errors or inconsistencies in this description. IMPORTANT: WE ONLY RESPOND TO INFORMATION REQUESTS THAT INCLUDE THE SENDER'S NAME AND PHONE NUMBER.

Condition: new, machine/vehicle number: 1900040028, conveyor belt length: 1,700 mm, conveyor belt width: 440 mm, conveyor belt speed: 57 mm/s, power: 0.18 kW (0.24 HP), input voltage: 230 V, input frequency: 50 Hz, Conveyor belt in front 1,700 x 440 mm FDA compliant Dedpjtv E Disfx Akujck

Condition: excellent (used), Viessmann Vitoplex 200 440Kw Used Bi: 2007Typ:SX2A Power: 440Kw Viewing by appointment only! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. R2Ru7Mxt2V The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Request more information Dsdovilvdopfx Akujck

Condition: new, For sale: high-quality stainless steel compensators / flexible hoses from a reputable manufacturer. Components designed for industrial installations – ideal for compensating vibrations, thermal expansions, and misalignments in piping systems. ⚙️ Technical data Model: BOA-MS Material: Stainless steel 1.4404 (AISI 316L) Nominal diameter: DN65 Operating pressure: PN16 Type: compensating hose / steel compensator Length: approx. 1000 mm Connections: flanged Construction: steel braided Year of manufacture: 2021-2023 Condition: New / unused (may show signs of storage) Dcodpfx Aeyzihajkuek ✅ Applications industrial installations water and heating systems steam installations chemical and food industries vibration reduction for pumps and equipment

Condition: new, For sale: High-quality steel compensator (compensating hose / Ringwellschlauch) from the renowned brand BOA, designed for industrial applications. This component is used for: - compensation of thermal expansion - vibration and noise damping - reduction of stresses in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Specifications Manufacturer: BOA Nominal diameter: DN125 Length: 1500 mm Pressure rating: PN16 Material: stainless steel 1.4404 (INOX) Type: compensating hose / steel compensator Connections: flanged Construction: corrugated hose with stainless steel braid Standards: ISO 10380 / DIN 📏 Dimensions Approx. internal diameter: 125 mm Total length: approx. 1500 mm ✅ Benefits ✔ reputable manufacturer BOA ✔ excellent corrosion resistance Dcjdpeyzirxefx Akuok ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ fast installation (flanged) 📦 Scope of delivery 1x compensator DN125 (as shown in the photos)

Condition: new, For sale: High-quality steel compensating hose (Ringwellschlauch) made of stainless steel, designed for industrial applications. This component is used to compensate for vibrations, thermal expansions, and stresses in piping systems. Ideal for installations: - industrial - heating - gas - water Dcedsyzimvopfx Akuok - process/technological ⚙️ Technical data Type: SP20 Nominal diameter: DN100 Length: 1000 mm Pressure: PN10 Material: stainless steel 1.4404 (INOX) Standard: ISO 10380 / DIN 3384 Designation: BOA-MS (10/2022) Connections: pipe ends for welding Braid: reinforced stainless steel braid ✅ Advantages ✔ corrosion resistance ✔ high durability and flexibility ✔ vibration and noise damping ✔ compensation of thermal expansion ✔ industrial-grade product – robust construction

Condition: used, mileage: 914,700 km, power: 324 kW (440.52 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,680 mm, total width: 2,500 mm, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, parking heater, = Additional Options and Accessories = - 6x2 - Digital tachograph - Lift axle - Refrigerator - Air suspension - Radio/CD player - Sleeper cab - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Axle Configuration Front axle: Tire size: 385/65 R 22.5; Steerable; Tire tread depth left: 45%; Tire tread depth right: 45%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/80 R 22.5; Tire tread depth left: 35%; Tire tread depth right: 35%; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R 22.5; Dual tires; Tire tread depth left (inner): 25%; Tire tread depth left (outer): 25%; Tire tread depth right (inner): 25%; Tire tread depth right (outer): 25%; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 8,433 kg Payload: 18,567 kg GVW: 27,000 kg Condition Damage: Damaged vehicle (not roadworthy) Identification Dedpfx Ajztkmrekuock License plate: 72-BFB-8

Condition: good (used), mileage: 468,127 km, power: 357 kW (485.38 HP), first registration: 07/2022, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 3,790 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,300 mm, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, = Additional Options and Accessories = Dcjdpfxjzti D As Akuek - 2nd Diesel tank - Heated mirrors - Digital tachograph - Driver’s card (recording device) - Fixed - LED lamp - Manual - Radio/cassette - Sleeper cab - Lane keeping assist - Fabric = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 6870 kg, Gross vehicle weight: 20000 kg, Total tank capacity: 1180 liters, 2nd Diesel tank, Height of the fifth wheel coupling: 113 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 255 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Driver’s card (recording device), Digital tachograph, Air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Bluetooth, Engine power: 357 kW (479 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual = Additional Information = Transmission Transmission: ZF, 12 gears, Automatic Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Tire tread depth left: 10 mm; Tire tread depth right: 11 mm; Suspension: Leaf spring suspension Axle 2: Double tires; Tire tread depth left inner: 1 mm; Tire tread depth left outer: 4 mm; Tire tread depth right inner: 2 mm; Tire tread depth right outer: 3 mm; Suspension: Air suspension Weights Tare weight: 6,870 kg Payload: 13,130 kg GVW: 20,000 kg Maintenance APK (Technical Inspection): Valid until 04.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €642 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, mileage: 634,000 km, power: 324 kW (440.52 HP), first registration: 06/2016, fuel type: diesel, next inspection (TÜV): 05/2027, gearing type: automatic, emission class: euro6, Equipment: air conditioning, XF 440 Space Cab Dcodozthckopfx Akujk Automatic transmission Air conditioning Auxiliary air conditioning Cooler box 2 sleeping berths NEW SMT2 TACHOGRAPH!!!! Toolbox Belgian registration Good condition Price: €8,950 net

Condition: new, power: 324 kW (440.52 HP), first registration: 05/2025, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 590 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 6,640 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2025, Equipment: air conditioning, = Additional options and accessories = - Leaf spring suspension - Sun visor Dodpozr Ebbjfx Akueck = Notes = Fuel tank: 590 liters Air conditioning Sleeper cab with one bed Fifth wheel: 2 inch Fifth wheel height: 1,454 mm = Further information = Transmission: MAN 16.25 OD, manual transmission Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Number of cylinders: 6 Engine displacement: 12,419 cc Unladen weight: 7,674 kg Payload: 11,326 kg GVW: 19,000 kg = Company information = WE PROVIDE, YOU ACCELERATE. Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported by comprehensive after-sales services, such as supplying parts and providing (local) training.

Condition: new, power: 324 kW (440.52 HP), first registration: 07/2025, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 590 l, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 7,350 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2025, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - PTO (Power Take-Off) - Sleeper cab - Sun visor = Notes = Fuel tank: 590 liters Air conditioning Sleeper cab with one bed Premium driver’s seat package, air-sprung Premium stowage and storage space package, with refrigerator and storage compartments Fifth wheel: 3.5 inch Fifth wheel height: 1,452 mm. The listed dimensions are transport dimensions, without a spoiler. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Transmission Transmission: MAN 16.25 OD, manual transmission Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 9,988 kg Dsdpezr Ea Rsfx Akusck Payload: 23,012 kg GVW (Gross Vehicle Weight): 33,000 kg = Company Information = WE PROVIDE, YOU ACCELERATE. Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. We offer comprehensive after-sales services, such as supplying parts and providing (local) training.

Condition: new, power: 324 kW (440.52 HP), first registration: 10/2025, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 910 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro2, suspension: steel, total length: 6,640 mm, total width: 2,500 mm, total height: 3,600 mm, Year of construction: 2025, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension Dsdpfx Akszr Eadoujck - Sleeper cab - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Transmission Gearbox: TipMatic 12.28 OD, automatic Axle Configuration Tire size: 315/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steerable Weights Unladen weight: 8,000 kg Payload: 13,000 kg GVWR: 21,000 kg = Company Information = WE PROVIDE, YOU ACCELERATE. Without limits. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. We provide comprehensive after-sales services, including the supply of parts and the provision of (local) training.