Used Bitzer Typ: 2Ghc-2K-40S for sale (14,014)

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Hnsdpop Audqofx Ab Nel Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: GER, Technical data: 1 Abus VS column-mounted slewing crane, nominal load 500 KG Maximum load at full outreach: 500 KG / 0.5 tons Height: approx. 3.8 m, under jib: approx. 3.4 m Outreach: approx. 4 m, hook height: approx. 3 m Base plate approx. 60x60 cm Total weight approx. 700 kg Including Abus GM4 chain hoist (year of manufacture 2018) with pendant control (2 lifting speeds) Hjdpey Hgnnsfx Ab Nonl Connection: 400V 16A, slewing range 360° Crane is disassembled and immediately available Article location: 75053 Gondelsheim Only the crane system shown in the pictures is for sale Very good condition, see pictures Shipping via forwarding agent or collection by appointment

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: SN 336, cutting force: 420 t, power: 80.9 kW (109.99 HP), total width: 2,800 mm, total length: 15,000 mm, total height: 3,400 mm, overall weight: 54,000 kg, cutting length (max.): 2,000 mm, year of last overhaul: 2016, Used hydraulic scrap shear LEFORT 420 t / semi-mobile Model C 420TD Incl. HF radio remote control Can be installed without foundation – machine is mounted on a 300 mm steel frame, incl. 4 lateral supports for self-loading and unloading. Shear force: 4200 kN Shear width: 800 mm (blade 820 mm) Hnedpfxoy Hq Eqo Ab Nsl Shear height: 520 mm

Condition: used, Year of construction: 1978, machine/vehicle number: NBGMAN 2, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Hodpfsr Igtksx Ab Njnl Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection Hsdpfxey Ih Skj Ab Njnl - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: used, Year of construction: 1991, functionality: fully functional, conveyor belt width: 615 mm, total width: 1,500 mm, total length: 1,075 mm, total height: 1,195 mm, input voltage: 400 V, input frequency: 50 Hz, opening width: 30 mm, working width: 615 mm, type of input current: three-phase, We offer this used Fritsch Rollfix type 3WK / 630 dough sheeter, year of manufacture 1991. - Combination dough sheeting machine - Suitable for rolling and laminating all types of dough - Extendable table on the left - Pressure plate adjustment by hand - Long roller / long moulder underneath - Operated by hand and foot control - Connection: 400V, 16A plug Hsdpfx Abjydlnao Nenl - Dimensions (W x D x H): 1550x1075x1195 mm Used machine This is a private sale. The sale is made under exclusion of any warranty or liability for material defects. If you have any questions or need further information, please send us a message or call us.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Glass cutting line HEGLA OPTIMAX 6048, year 1994 with laminated glass table BALELLONI LFR 40, year 2003 Condition: good, fully functional Glass loader HEGLA: - 6 positions (3+3) - 13 Jumbo A-type glass racks: 6 with loader, 7 for glass storage Cutting table HEGLA: - Glass thikness 3-12 mm - Low-E edge delition - Breaking table Laminated glass table BAVELLONI: Hedpfx Absy H Hm Do Nenl - Max width 3700mm - Max. thikness 66.2

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2027 – 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY. ==> Information for manufacturing companies and dealers with in-house production: Upon request, the drawings, rights, spare parts, customer and prospect data, planning and production documents (including plans for a variant with 9 tons pulling force) for the broaching machine can be purchased from us. If interested, please contact us. —Currently available at special conditions— ==> Our new machines are custom-built to order. Short lead times for manufacturing and delivery are possible. ==> Spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are currently available from stock. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaches for internal splines, etc.) and accessories are available on request. Please inquire separately. All broaching tools and holders from other manufacturers can be used and fitted with our broaching machine! All production and assembly takes place at our factory in Germany. In addition, we also offer spare parts (spindles, spindle nuts, motors, gears, and all other necessary components – including electrical parts) for Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2027 – NEW MACHINE: The main area of application is the production of keyways from 3–28 mm (and beyond), as well as profiles of similar dimensions. Due to its compact and space-saving design, the machine can be successfully used in small, medium, and large workshops. Its attractive price also makes it suitable for small batch production and one-off jobs. Drive is via a pole-changing geared brake motor. The maintenance-free double-spindle drive ensures smooth operation, a central pulling point, and constant cutting force. The open worktable design allows even large workpieces to be positioned without obstruction. In most cases, workpieces do not have to be clamped. Stroke adjustment is via adjustable limit switches with stroke limit. Short hubs and small workpieces can be processed by stacking several workpieces at once. Broaching needles, mandrels, and spare parts available on request. Technical Data: • Pulling force: 60 kN at 3 m/min; 40 kN at 6 m/min • Broaching speed: 3 m/min & 6 m/min (Option: stepless speed adjustment (0–6 m/min) via extended electronics) • Return speed: 6 m/min • Stroke: 1050 mm • Broaching tool length: 1200 mm • Workpiece diameter: unlimited • Worktable: 450 x 350 mm • Table opening: 140 mm • Weight: approx. 510 kg • Footprint: 750 x 570 mm • Overall machine height: 1510 mm • Drive power: 3.7 / 4.4 kW • Electrical equipment: 400 / 230 V 50 Hz • Control voltage: 230 V • Operating voltage: 400 V 50 Hz • Paint finish: Exterior RAL 7035/7036/7016, Interior RAL 3000 • Safety door: standard equipment Hnedpfx Aeuqbnhob Nsl • Coolant system: standard equipment The machine complies with the latest Machinery Directive and bears CE marking.

Condition: used, Year of construction: 2017, operating hours: 1,088 h, load capacity: 2,500 kg, fuel type: diesel, power: 25 kW (33.99 HP), gearing type: other, overall weight: 5,080 kg, empty load weight: 2,580 kg, first registration: 06/2017, maximum load weight: 2,500 kg, axle configuration: 4x4, number of seats: 1, driver cabin: other, brakes: other, Equipment: all wheel drive, pallet forks, retractable fork, * All-wheel forklift with all-wheel steering * Condition, see photos * Lifting height 3,040 mm * Only 1088 operating hours Hedjvhqc Hspfx Ab Njnl * Max. load capacity 2500 kg * Kubota diesel engine 25 KW / 33 PS * Four-way steering * All wheels can be turned for sideways movement when long loads have to be moved and / or space is limited or only small openings are available * Sideshift * Load center of gravity 600 mm * Road lighting * Rotating beacon * Reversing warning device * Comfort seat with lap belt * ROPS / FOPS driver's cab Rollover protection superstructures and protective superstructures If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), 2-component gun, multi-function gun, cartridge gun, cartridge press, double cartridge dispensing gun, 2K mixing gun -Manufacturer: Plunger, Dual Cartridge Dispensing Gun Mixpac Strap Kit -Quantity: 1x cartridge gun available -Price: per piece Hnodpsu Aigkjfx Ab Nsl -Dimensions: 300/210/H85 mm -Weight: 1.2 kg

Condition: used, functionality: unexamined, machine/vehicle number: DC18330, total width: 2,000 mm, total length: 2,000 mm, We are offering this used Johann Fischer Aschaffenburg measuring plate, type IDT009 – surface plate, spotting plate, marking-out plate, year of manufacture unknown. Manufacturer: Johann Fischer Aschaffenburg Origin: Made in Germany Type: Measuring plate Item number: IDT009 Hodpfxey H Dgbj Ab Nsnl DC number: DC 18330 Inventory number: QS-00355 Inspection date: 23.3.03 If you have any questions or need further information, please feel free to send us a message or call us.

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 9332067, ROLLER CONVEYOR - CONSTRUCTION BLASTING SYSTEM MANUFACTURER: RUMP TYPE: 20-W 1500-4 Manufacturer: Rump Type: 20W-1500-4 Year of manufacture: 2012 Please refer to the technical drawing for dimensions, as well as for the operating hours. Including filter unit, sound insulation, control cabinet, complete documentation, etc. TOP CONDITION This is a ready-to-use, pre-owned machine. Sale is made without warranty and without guarantee. Hodpoy Entiefx Ab Njnl Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 5,400 mm, inner dimension width: 750 mm, inner dimension height: 850 mm, total length: 6,500 mm, total width: 950 mm, total height: 1,500 mm, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We are offering this very well-maintained Lauber longitudinal flow dryer type 2 S6 chamber dryer, year of manufacture 2022. Type/Plant No.: 2 S-6 / 44217 Rated voltage: 3pH AC 400/230 V 50 Hz Fan motor rated power: 1.1 or 0.75 kW Fan motor rated current: 7.1 A Electric heater rated power: 7.5 kW Total rated power: approx. 15 kW Total rated current: 25 A Pre-fuse (slow-blow): 25 A Hedpey Hdmnefx Ab Nenl Control voltage: 24 V DC Wiring diagram no.: SP361 RV Year of manufacture: 2022 Technical details: A double-shell thermal insulation of the wood dryer guarantees excellent insulation properties. The inner wall cladding is made from 1.5 mm thick, seawater-resistant special aluminium and is tightly welded. The outer cladding consists of stucco trapezoidal and stucco smooth sheet metal. The thermally insulated floor is designed as a tightly welded stainless steel tray and is permanently resistant to aggressive wood substances. The wood dryer should be installed on a stable, level surface; no special continuous foundation is required! A front door with a wide opening angle and all-round rubber seal ensures convenient operation and high steam tightness. An aluminium trolley for side loading and unloading, along with interior rails and removable exterior rails, enables comfortable and space-saving loading. Efficient and uniform longitudinal ventilation of the wood stack is ensured by a powerful radial fan (0.55 kW) mounted on the end face. The chamber is heated by electric heating rods with a heating capacity of 6.0 kW. Excess moisture is extracted via servo-controlled 100 mm intake and exhaust dampers. Chamber humidity can be increased if necessary by cold water atomization. 140 straight aluminum stacking battens are included in the delivery. The standard PLC control (SPS) regulates the drying process fully automatically and, thanks to a 7'' color touch panel, offers user-friendly operation. Simply enter three parameters: 1. Wood species 2. Lumber thickness 3. Desired final moisture content Based on this data, the system optimally controls the drying process, allowing you to obtain your wood in the desired quality in a short time. The standard control equipment includes: - 3 pcs. wood moisture measuring points with drive-in electrodes and sensor cables - 1 pc. wood equilibrium moisture measuring point - 1 pc. air temperature sensor We supply the Lauber wood dryer fully assembled and ready for connection! Detailed operating instructions, drying recommendations, as well as installation and loading instructions are included. Original price: EUR 31,120 plus VAT Previous lead time: 15 months The dryer has been used for around 30 drying cycles and is in very good condition. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 111/52, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: documentation/manual, foot remote control, For sale: New/unused Amob MAH 40/3 CNC profile bending machine. We purchased the machine new from Maqfort in 2022. Due to relocation of production and changes in the order profile, we found no use for the machine; it has not even been connected or commissioned. Therefore, it is a brand new machine. Hsdpfsy Hn Uvex Ab Njnl Equipment: Hydraulically controlled top roller feed / Can be operated in both vertical and horizontal positions / 3 mechanically driven rollers / Manually adjustable side rolls / CNC control / Movable foot pedal includes digital display, 2 pedals, emergency stop button / 3 standard (hardened) tooling rollers. Price: 25,153 euros. In case of sale, Maqfort will provide installation, commissioning and staff training according to agreement.

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 25 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520S 1600 290/70 2-component 12.3 million cycles 86,565 hours manual operation 78,099 hours automatic operation Injection unit 1 horizontal 290, diameter 25, max. 71 cm³ Injection unit 2 vertical 70, diameter 18, max. 21 cm³ Opening stroke 925 mm Electric index rotation 12-zone hot runner integrated 3x core pull 2x air blow (control for needle shut-off) Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6kg: 2x vacuum 5x double-acting grippers Z-axis servo 800mm C, G, X, and B-axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) Hsdpexzix Asfx Ab Njnl Important Notice!!! Current update – Tax note and benefit for used machinery From 01.07.2025, used machines can also be considered for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Section 2 EStG-E)

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component 78,099 hours, automatic Injection Unit 1: horizontal, 290mm, diameter 25mm, max. 71 cm³ Injection Unit 2: vertical, 70mm, diameter 18mm, max. 21 cm³ Opening stroke: 925 mm Electric table indexing 12-zone integrated hot runner 3x core pulls 2x air blow (control for needle shut-off) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6kg: - 2x vacuum - 5x double-acting grip - Z-axis servo 800mm - C, G, X, and B axis pneumatic - Various customer-specific inputs and outputs (gripper monitoring, etc.) Hnjdpjx A Dy Rofx Ab Nol At Maschinen-Handel, we offer a commissioning guarantee for every machine purchased from us, meaning the machine will be started up by the manufacturer. This offers you, as a customer, maximum security on the used machinery market. Important Note!!! Current legal update – Tax advantage for used machinery Effective from 01.07.2025, used machines can also be subject to an annual special depreciation of 30%. In addition to the lower price compared to a new machine, you can benefit from the same depreciation allowances as with a new machine. Keyword: growth booster (§ 7 Paragraph 2 EStG-E)

Condition: excellent (used), -Dimensions: 700x600x1300mm -Model: PH401 Hnsdpfxewxv T Re Ab Nsl -Serial Number: 78635 -Tank capacity: 40L -3 speeds -Supplied with pallet -Year: 04-1997 Power: 2.2kW -Voltage: 400V -Overhauled equipment: The equipment is prepared upon order, pick-up and return

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Hodpfxeudz D Ue Ab Nonl Pump pressure: 2.5 bar

Year of construction: 2016, condition: reconditioned (used), functionality: fully functional, Description Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregate draws the lye from the washing tank and transports it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The soiled parts are radiated intensively with the hot lye from all sides with a uniform rotation of the motor-driven basket. Hnjdpfxohvzy Aj Ab Njl After completing the cleaning process, the device switches off automatically. Advantage 1 pump arranged horizontally 3 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, sprocket drive via separate motor intake filter in front of the pump shaft high injection pressure steam extraction stainless steel screen with filter basket water indicator Technical data Tank capacity 85 l Basket diameter 780 mm Capacity 150 kg Temperature min. - max. 0-60 °C Working height 500 mm Dimensions (W x D x H) 1130x1010/1220x1150/1730 mm Weight 90 kg Heizleistung 4 kW Spray rate 4800 l/h Material Stainless steel Power supply 4,8 kW/ 400 V/ 50 Hz Pumpendruck 3,1 bar

Condition: used, maximum load weight: 23,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2008, loading space length: 13,357 mm, loading space width: 2,409 mm, loading space height: 2,571 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2007, Equipment: ABS, * Own hydraulic unit (24V) * TYPE 2 approval * Hydraulic tail lift * Lifting roof * Watering system * Heating * Fan * Side shifter ----* 1st axle liftable * BPW ECO Plus axles with drum brakes * CTEK charger Hodpjy D Dmpefx Ab Nsnl ----* Tire size: 455/40R22.5 * Technical gross weight: 36,000 kg * Unladen weight: 11,800 kg * Overall length: * Safety inspection due: ///// ----Vehicle number: 11885----Errors and prior sale excepted----Advertising and various lettering have been digitally removed. -----We are happy to assist you with all formalities related to the purchase of a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Additionally, we can offer the following services for an extra charge: ----Trade-in of your old vehicle TÜV/Safety Inspection Complete export processing Financing arrangements Export license plate application Vehicle transfer Vehicle registration Recovery and vehicle transport---- ?YOUR VTS TEAM

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Hjdoy E Ilxepfx Ab Nonl Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: used, functionality: fully functional, machine/vehicle number: 04217, For sale is a reliable and robust temperature control unit from Regloplas, model 90S. Used condition, with age-appropriate signs of wear on the housing. 3 units available. Hnjdpfx Aey E Hzrjb Njl Technical data Type: 90S / 6 / TS22 / 1K / RT45 Max. temperature: 90 °C Heating capacity / power rating: 7.1 kW Voltage: 400 V / 3 PE (three-phase) Frequency: 50 Hz Current: 11 A Filling volume: 3 l Wiring diagram no.: 04217

Condition: used, plate thickness 4,0 mm roll diameter ca. 120 mm Hnsdpfoy D A Eqsx Ab Nel throat 450 mm weight of the machine ca. 0,48 t dimensions of the machine ca. 1,3 x 0,8 x 1,8 mm

Condition: used, Year of construction: 1989, saw blade diameter 400 mm capacity 90 degrees: round 120 mm turning speeds 1400 / 2800 U/min engine output 4,0 kW weight of the machine ca. 180 Kg dimensions 1,0 x 0,9 x 1,2 m Manuell underfloor aluminum circular saw Hnjdpfjy D A E Dsx Ab Nsl

Condition: used, Universal facing and boring head WOHLHAUPTER type UPA 3 Spindle tool, spindle head (suitable for DECKEL) Manuf. No. 40769 Tool holder: MK 4 - S20x2 Tool holder: SK 40 - S20x2 Hsdoy Ehyiepfx Ab Nenl Shaft tool holder: Ø 18 mm Adjustment accuracy: 0.01 mm - with adapter sleeve MK4 to SK40 - Accessories as shown - Storage case Net weight (spindle head only): 2.8 kg Weight with storage case: 6 kg good condition