Used Blm-Group 3D Cnc-Wire Former for sale (16,813)

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Lrjdpfsq U R Rujx Aa Rsr Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Lredpjq U Sa Sofx Aa Rsr Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, SCM - STEFANI AUTOMATIC DOUBLE-SIDED FORMATING & EDGEBENDING LINE consist of: 1. SCG vacuum feeder / loader and conveyor 2. SCM STEFANI EVOLUTION SSB 1 automatic double-sided formating and edgebending machine − clean pack L − anti adhesive unit AAR − crushing unit − automatic milling unit − EVA glue module − SLIM LINE module − NORDSON units for PU glue − end trimming unit − horizontal sawing unit − fine trimming unit − milling unit for edge rounding of solid wood − multiedge scraping unit − brushing unit Total lenght: 9750 mm 3. PANEL TURNER GP DC / BOR 4. SCM STEFANI EVOLUTION SSB 2 double-sided automatic formating and edgebending machine − clean pack L − anti adhesive unit AAR − crushing unit − automatic milling unit − EVA glue module − SLIM LINE module − NORDSON units for PU glue − end trimming unit − horizontal sawing unit − fine trimming unit − ROUND 4 unit with Zero lock − milling unit for edge rounding of solid wood − multiedge scraping unit − brushing unit Lodpszb Eu Uofx Aa Rjrr 5. BIESSE Techno Logic - automatic throughfeed drilling machine 6. SCG vacuum feeder / loader and conveyor Total lenght: cca 23 m Year of production: 2018

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. Lrodpou Id H Aefx Aa Ror CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, WE OFFER AN SPINNER CNC TURNING AND MILLING LATHE. MACHINE IS COMES FROM 1.ST OWNER , MAKING PARTS FOR DOORS, WINDOWS-SMALL PARTS MACHINE COMEST WIT ALL TOOLINGS, BAR FEEDER IS NOT INCLUDED Ljdpfx Aaszbvths Rerr MACHINE WILL BE AWAILIBLE IMEDIATELY DIRECT FROM THE PRODUCTION.

Condition: good (used), Code: 0260 Brand: DMC SCM GROUP Model: UNISAND 2000 - CE Standard Automatic wide belt sander with 2 longitudinal units and 1 transverse unit at the inlet for furniture, joinery, custom-made furnishings, panels, wooden doors, window frames, semi-finished products and various - CE Standard Technical data: Max working width 1350 mm Min working width 52 mm Min length 400 mm Min/max working height 4/170 mm Belt feed with variable speed motor Longitudinal abrasive belt length 1370 x 2620 mm Transverse abrasive belt length 150 x 6550 mm Lamellar belt length 140 x 6300 mm Automatic belt centring Automatic table positioning Digital display of working thickness Control panel with dustproof membrane keyboard Electronic system for belt oscillation Rubber-coated pressure rollers Automatic belt centring 1° Group: Transverse Sanding Pad with development 6550 mm and fitted with a lamellar belt, guarantee of stability and excellent abrasive belt tensioning Sectioned electronic pad "EPICS" with electronic control "HYDRA" with 46 sectors, with centre distance 30 mm A LED screen allows verification of the operation of the activated pad sectors The unit is equipped with blowers for cleaning the abrasive belt 2-speed motor power 12/15 Kw Suction hood diameter 160 mm Combined longitudinal calibrating/sanding group with steel roller and sectioned electronic pad 46-sector "EPICS" with centre distance 30 mm Reading barrier 46-sector Abrasive belt dimensions 1370 x 2620 mm Roller diameter 220 mm Motor power 15/18,5 Kw Oscillating blowers with electronic control Sectioned electronic sanding pad "EPICS" with 46 sectors and centre distance 30 mm Reading barrier 46-sector Motor power 15 Kw Oscillating blowers Scotch Brite satin roller Diameter 150 mm Motor power 3 Kw Suction hood diameter 160 mm Ledpfxjx Dm Tvo Aa Rorr Vacuum table Electronic control HYDRA 35 Compressed air 8 bar Overall dimensions of assembled machine mm 3200 x 2,900 x 2400 h Overall dimensions for transport mm 3200 x 2300 x 2400 h Weight kg 4400

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and variable machine table. Lrodpfewfdm Ejx Aa Rjr

Condition: used, Year of construction: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste. Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Key Features: - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway - Adjustable fill heights and speeds to accommodate tubs from small family sizes to larger multi-serve formats - Hygienic design with easy-clean sanitary surfaces, CIP compatible components, and sealed guarding - User-friendly interface for quick changeovers and reduced operator training time - Heavy-duty construction suited for continuous production environments - Smooth, low-shear filling preserves ice cream structure and reduces air entrainment - Optional integrations for lid placement, sealing, date coding, and packing conveyors Whether you’re scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers dependable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety offerings. Cup size: 200 x 100 mm (LxW) Granular application: Available Main filling: Available Ledoynr Axopfx Aa Rjrr Cap Closing: Available Stations: Cup Dispenser > Filler > Granular Filler > Lid Closing > Outlet Conveyor Condition: Good Available: Immediately

Year of construction: 2021, condition: excellent (used), Richel irrigation and fertigation system with 4 vertical centrifugal pumps WILO type: Helix. Mixing unit : 12m3/h 1 wastewater treatment plant make : UVGERMI Ljdpfx Aajupwhzj Rerr Type: 3XAD300. with water filter Hectron AG 100 1 fresh water tank capacity : 1.900L. 2 x water tank capacity : 3000L

Condition: excellent (used), Professional tool holders from the renowned brand GARANT (Hoffmann Group). Model 300230 6 SK40-6-100 – clamping diameter Ø6 mm, length 100 mm. • SK40 taper – CNC standard • Clamping diameter Ø6 mm • Holder length 100 mm • Maximum rotational speed 25,000 rpm • High precision and clamping stability • Used, fully functional and ready for work. -- PRICE LISTED FOR 1 PIECE -- Ljdpow Sy D Eefx Aa Rsrr

Condition: excellent (used), We offer a professional optical 3D measurement system, KEYENCE VL series, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial environments. Set includes: – Scanning head VL-370 Lrsdpfxeyc H Npj Aa Rer Condition: Very good, well-maintained equipment Note: Set is sold without monitor / PC unit (option to equip according to your needs) Manufactured: Made in Japan

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Lrsdoy Stahepfx Aa Rer Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Lredpjybtnvefx Aa Rjr Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet - seal lid with hot melt glue - index to serialised printing - carton discharge

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 400 mm Z-axis travel: 95 mm A-axis: Spindle rotation A1-axis: Tailstock rotation V-axis: Bar support on processing line (90 mm) W-axis: Workpiece support relief (85 mm) X1-axis: Tailstock travel (610 mm) Laser power: 2,500 W Max. tube diameter: 140 mm Max. tube length: 8,500 mm Square tube: 12–120 mm side length Table length: 8,500 mm Working length: 8,500 mm Max. bar length: 8,500 mm Max. total bar weight: 130 kg (15 kg/m) Workpiece total load (max.): 4,000 kg MACHINE DETAILS Control: Sinumerik 840D Laser type: CO laser Laser source model: Rofin DC 025 Input power type: Three-phase Compressed air connection: 6 bar Dimensions & Weight Dimensions (L x W x H): 17,536 x 4,604 x 2,237 mm Total weight: 10,000 kg Operating hours: 22,500 h EQUIPMENT Lrsdpfxoypayus Aa Rer CE marking Documentation/manual Chiller unit Dust extraction Cutting head: Autofocus with capacitive sensor and collision protection Automatic bundle loader with alignment, measuring, and separation system Scimitar tube transfer system CNC-controlled tube support system with 5 active support units Intelligent part ejection with conveyor belt for short pieces up to 300 mm Fume extraction: 2,000 m³/h with high-performance filtration system Cooling: MTA TAE 121 chiller, 260-liter cooling circuit Hydraulics: 25-liter tank, 25 l/min pump, 70 bar system pressure

Condition: new, Year of construction: 2023, Technical specs CNC – 800 Control Syntec Drive system YASKAWA servo drive Main motor 7,5 Kw Spindle speed till 7000 Rpm Max drilling dept 800 mm Drilling diameter 2,5 till 30 mm X stroke 800 mm Y stroke 800 mm Z stroke 800 mm cutting feed 300 mm/min spindle speed 7000 Rpm spindle motor Servo 11 Kw X servo motor 3,9 Kw Y servo motor 3,9 Kw Z servo motor 3,1 Kw oil pump motor 5,5 Kw oil pressure 21 bar table loade 6000 kg machine weight 8,3 ton Lodpfxsk N Dtuj Aa Rsrr machine power 34 Kw. Machine size 4,2 x 3,5 x 2.6 meter Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Ledju Nyxwopfx Aa Rjrr Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: good (used), Year of construction: 2011, functionality: fully functional, Industrial steam boiler Brand Loos Bosch Group Model U-ND 800 Serial number 109582 Year of construction 10/2011 Total capacity: 1108 liters Steam output 800 kg per hour with Weishaupt GmbH burner Burner type WM - L10/3-A Year of construction 2011 Minimum: 250 kW Maximum: 800 kW Steam boiler dimensions: 2500 mm x 1600 mm x 1900 mm, Lrsdov I E Tgepfx Aa Ror Storage tank Achenbach GmbH Capacity: 800 liters Dimensions: 1600 mm x 850 mm x 2600 mm Control cabinet Dimensions: 1000 mm x 180 mm x 750 mm. Burner after major renovation in 2024.

Condition: good (used), Year of construction: 2013, Sorter for Light Loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 Trays, with 261 Target Configuration – Used – : Sorter price incl. control system: ex-works: €99,500 (net), including dismantling, packaging and loading! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Model: OPTISORTER HORIZONTAL Year of manufacture: 2013 • UNIQUE PUSH-TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control system: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6,000 trays/h Total system length: 53 m Total system width: 14 m Number of induction stations: 1 Induction station width: 2 m Number of trays: 200 pcs Usable size per tray: 450 x 700 mm Tray pitch: 520 mm Chute width: 680 mm Number of drives: 3 pcs Product dimensions (L/W/H): Sorter: min.: 150 / 120 / 10 mm max.: 600 / 400 / 200 mm Weight: min.: 0.25 kg / max.: 5 kg No longer available: the roller conveyors, pick-by-light system, flap elements. There were two targets per sorting station, sorted into the upper or lower target roller conveyor via tilting chutes. Total number of targets on the sorter: 261 targets in the system. Number of targets for special purposes (overflow, reject, etc.): 3 pcs. A pick-by-light system is installed on the target roller conveyor. Lrjdpfowxu A Rsx Aa Rsr This means all components installed downstream of the trays after discharge are no longer present and are therefore not part of the sale! Condition: good Available: immediately Location: warehouse in Frankenberg/Saxony Detailed description available on request as PDF (in English).

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Ljdpfoy Ibgzox Aa Rorr Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Collection only

Condition: used, functionality: fully functional, Year of construction: 2007, control type: CNC control, For sale: CO₂ Tube Laser BLM Group Adige LT712D The machine is fully operational and in daily use in production. Inspection and testing on site are possible. The laser source ROFIN RF tube DC025 has been replaced with a new one. The new source has only 2386 operating hours. Specifications: Model: BLM Adige LT712D CO₂ tube laser Year of manufacture: 2007 Laser source: Rofin RF tube DC025 New laser source operating hours: 2386 h Total machine operating hours: 89186 h Automatic tube loading and unloading CNC control Autofocus cutting head Suitable for cutting round, square, and rectangular profiles Automatic profile centering and measurement devices Professional industrial construction Scope of supply: Rofin DC-K laser integration AK-HP 591-LT712 cutting head 5” focusing system 6500 mm tube system Automatic unloading module The machine is suitable for the production of metal constructions, furniture, automotive, tubular structures, and other metal products. If you have any further questions, we will be happy to answer them. Lredpfey R Tt Ssx Aa Rer

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work Lrsdpettg S Ujfx Aa Rjr • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: new, DRIVESHAFT BALANCING MACHINE BVI-03-88 Balancing machine for professional repair of cardan shafts up to 200 kg. The hard-bearing machine is adapted for heavy cardan shafts of trucks and special machinery. The high sensitivity of the supports allows also high-quality balancing of cardan shafts of passenger cars. The machine is designed for balancing cardan shafts in the facilities of cardan repair workshops. The machine can be quickly reconfigured for balancing a large amount of single cardan shafts of various designs, as well as for the production of small batches of shafts. . . . TWO TIMES faster then your machine. Ledpfon E Skwsx Aa Rsrr This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . .. ... HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 5200mm, weight up to 200kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Hard-bearing type machine - safe balancing of shafts with large initial unbalance • Machine is operated by one worker • Sliding tailstock spindle - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 200 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 5200 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2500 rpm Parameters of the supply network 380V, 3 Ph, 50Hz Power consumption, minimum, 3 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 1100 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 10,000 kg, total length: 11,600 mm, total width: 2,560 mm, total height: 600 mm, input voltage: 220 V, type of input current: three-phase, input frequency: 60 Hz, TIR body/chassis repair frame for trucks and large-size vehicles TM-M60 This is a professional device designed for comprehensive repair and straightening of various body and chassis elements of trucks, delivery vehicles and cars. Thanks to its solid construction and the equipment with 6 towers with high pulling force (25 tons each), this frame allows for effective performance of advanced repairs, such as restoring the shape of damaged elements, straightening distortions or eliminating warps. High load capacity and precise tools make our repair frame perfect for professional workshops, guaranteeing speed, accuracy and reliability during repairs of large-size vehicles. Parameters: - Hydraulic pressure: 70 MPa (10000 psi) - Pneumatic pressure: 0.8 MPa - Maximum column tension: 25 tons (245 kN) Ledpovuxygsfx Aa Rerr - Load capacity: 50000 kg - Column working range: 360 degrees - Total weight: 10 tons - Number of towers: 6 Features: 1. With 6 towers, each with a maximum pulling force of 25 tons. 2. With a complete set of pushing and pulling tools, adapted to any type of straightening. 3. A lifting device with a capacity of 50 tons, which effectively repairs distorted beams. 4. With a 25 ton hydraulic arm that allows for the repair of distortions, bulges, twists, etc. 5. Four towers are 2500 mm high, and the other two are 4320 mm high. 6. Possibility to choose a color from the RAL palette. 7. Number of towers to be chosen by the customer.

Condition: new, Year of construction: 2026, Wrapping machines are designed for machine wrapping with stretch film of goods stored on pallets. They are especially recommended where it is required to obtain very high efficiency and low labor and financial expenditures in the process of packaging, so in distribution centers, wholesalers, production plants, as well as in smaller companies. The new model - has a touchscreen control panel, menus in languages: Polish, German, English, French Technical parameters: MASH: - Height :2.4m TABLE Table diameter - 1650 mm Max dimension of pallet - 1200x1200 mm Max weight of the pallet - 2000 kg Type of table: flat Adjustable disc speed: 3-12 R.P.M. Capacity: up to 30 pallets /1h. Automatic return to the starting position Powerful chain drive Soft start and end function POWER 230 V 50 Hz HEAD TYPE (depending on the model) - Pre stretch - Mechanical film stretch up to 350% (optional) - Film stretch: from 1m to 4m - Components from reputable companies including PANASONIC photocell ADDITIONAL FUNCTIONS - Very easy operation - Working hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the pallet - Adjustable wrapping speeds Lrsdpfxetpvbmj Aa Rsr

Year of construction: 2026, condition: new, Wrapping machines are designed for machine wrapping with stretch film of goods stored on pallets. They are especially recommended where it is required to obtain very high efficiency and low labor and financial expenditures in the process of packaging, so in distribution centers, wholesalers, production plants, as well as in smaller companies. Technical parameters: MASZT - Standard mast allows you to wrap a pallet up to 2400 mm high - depending on the model - Automatic return to the starting position - Top plate for additional stabilization of the pallet TABLE - Table diameter - 1650 mm - Max pallet dimension - 1200x1200 mm - Max weight of pallet - 2000 kg - Type of table: flat - Adjustable disc speed: 3-12 R.P.M. - Capacity: up to 30 pallets /1h. - Automatic return to the starting position - Powerful chain drive Lrsdstpvbbopfx Aa Rsr - Soft start and end function POWER 230 V 50 Hz HEAD TYPE (depending on the model) - Pre stretch - Mechanical film stretch up to 350% (optional) - Film stretch: from 1m to 4m - Components from reputable companies including: PANASONIC, SIEMENS ADDITIONAL FEATURES - Very easy operation - Hour counter - Pallet counter - Cycle pause function - Stretching on head modes and not on pallet - Adjustable wrapping speeds